Fitment #100

311-845-121/B/B – Windscreen Seal Deluxe for Plastic Trim

Description:

Windscreen seal with recess for a plastic chrome trim. Fits all Type 3 models

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-845-321/D – Rear Quarter Window Seals Fastback

Description:

A pair of rear quarter window seals for both the left and right side of Fastback models. Plain black with no provision for a chrome trim

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-845-521/C – Rear Window Seal Fastback

Description:

Rear screen seal in plain black. To fit Fastback models

Compatible Vehicles: - Type 3 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-845-521/E – Rear Window Seal Deluxe Fastback

Description:

Rear window seal for chrome trim.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Fastback models only.

Additional Vehicle Info: Type 3

311-847-129/B – Pop out Hinge Protection Cover

Description:

Pop out Hinge Protection Cover

Fits over the frame hook on the pop out frame and into the slot on B-Pillar post on the body itself. Stops the window rattling.

This sleeve is very important and required for proper pop out window installation on all Square back and Notch back models.

4 pieces are required per car.

Sold each.

Not for Fastback

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-847-145/B – Pair of Inner Pop Out Window Seals Notch or Square Back

Description:

Inner pop out window seals. Supplied as a pair to fit notch or square back model

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-847-245/ / – Rear Pop-Out Window knob, Ivory Coloured

Description:

Knob for pop out quarter light catch finished in an ivory colour

From factory, most beetles came with standard fixed quarter light glass but there was also an option to have pop out windows as well, this option was mainly for the warmer regions of the world and at the time ''pre air con days'' it was a very popular option to have . As time goes on the release knobs become faded or damaged, replace them today with these quality replacements.

To fit
Beetle 08/65-07/77
Karmann Ghia coupe 08/60-08/74
Type 3 Fastback 08/66-07/73

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,Type 3

311-853-309/B / – Windscreen Trim Joining Clip

Description:

Connects ends of plastic chrome window trim
Seamless finish for windscreen seal trim
Durable metal construction for longevity

This windscreen trim joining clip is designed to neatly connect the ends of plastic chrome window seal trim, creating a smooth and continuous finish. It’s ideal for achieving a clean, professional look on your vehicle’s windscreen.

Made from durable metal, the jointing sleeve ensures a secure and lasting connection. Perfect for restorations or replacements, it helps maintain the integrity and appearance of your trim setup.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T25,T2 Bay

311-853-321 – Outer Window Aluminium Trim with Scraper Left

Description:

Chrome outer scraper trim frame for the left side. This is the part which surrounds the door glass and includes the rubber outer scraper

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-853-322 – Outer Window Aluminium Trim with Scraper Right

Description:

Chrome outer scraper trim frame for the right side. This is the part which surrounds the door glass and includes the rubber outer scraper

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-853-355 – Trim frame for rear window, Type 3 notch

Description:

Trim frame for the rear window, notchback model

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-853-591/C – Bonnet Handle Seal

Description:

Bonnet handle seal

Compatible Vehicles: - Type 3 (1966,1967,1968,1969)

Additional Vehicle Info: Type 3

311-853-615 – Rear Badge Clip Set

Description:

Set of 4 rear tailgate badge clips for use with the early Volkswagen badge.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972) - T2 Split Bus (1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965)

Additional Vehicle Info: T2 Bay,T2 Split,Type 3

311-857-110/A – Bamboo Style Under Dashboard Parcel Shelf

Description: A vinyl "bamboo" reproduction similar to the original Bambus under dashboard parcel shelf which was first introduced in 1955 as an aftermarket accessory.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:This will fit left and right hand drive models. Supplied with 2 P-clips and 2 self tapping screws.

Additional Vehicle Info: Type 3

311-857-200 – Dashboard Top Cover Black Plastic for Left Hand Drive

Description:

Black plastic dash top cover for left hand drive models only

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Fits over the existing dashboard to cover any damage.

Additional Vehicle Info: Type 3

311-857-513/A – Wing Mirror Left

Description:

Perfect for show car restorations or daily drivers
Beautiful chrome finish and excellent reproduction
Fits all Type 3 models from 1963-1973

This stunning chrome mirror is an excellent reproduction, meticulously crafted to meet the high standards of VW enthusiasts. Perfect for both show car restorations and daily drivers.

Crafted from high-quality #304 stainless steel, these fully polished mirrors feature a flat lens for optimal visibility. While specifically correct for 1963 to 1965 Type 3 Notchback and Squareback models, they can be mounted on any Type 3 from 1963 to 1973 that has door mounting threads. FLAT4 has produced these mirrors to offer a level of quality and authenticity that rivals genuine VW parts.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-857-514/A – Wing Mirror Right

Description:

Perfect for show car restorations or daily drivers
Beautiful chrome finish and excellent reproduction
Fits all Type 3 models from 1963-1973

This stunning chrome mirror is an excellent reproduction, meticulously crafted to meet the high standards of VW enthusiasts. Perfect for both show car restorations and daily drivers.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-867-167 – Oval Head Panel Screw 4.2x13

Description:

4.2x13 Oval head panel screw

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Corrado,Golf Mk1,Golf Mk2,Golf Mk3,Scirocco,T25,T2 Bay,T2 Split,Type 3

311-867-169/ 01C – Screw Cover Cap - Black

Description:

Neat finish for exposed screw heads
Durable black plastic construction
Easy snap-on installation

This black screw cover cap is designed to conceal and protect exposed screw heads, offering a clean and professional appearance. Made from durable plastic, it snaps into place easily and blends seamlessly with dark surfaces.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995) - 993 (1994,1995,1996,1997,1998) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - T5 (2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015)

Additional Vehicle Info: 924,944,968,993,Beetle,Corrado,Golf Mk1,Golf Mk2,Karmann Ghia,Transporter T4,Transporter T5

311-867-169/ 581 – Screw Cover Cap in White for Sunroof Finger Plate

Description:

Screw cover cap in white for sunroof finger plate
To fit vehicles wit metal sliding sunroof, supplied in packs of 10

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - T5 (2003,2004,2005,2006,2007) - Type 3 (1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Polo Mk1/Mk2,Scirocco,Transporter T4,Transporter T5,T25,T2 Bay,Type 3

311-867-169/ J51 – Screw Cover Cap, Lagoon

Description:

Screw cover cap in the colour lagoon. Used in the interior door trim panels

Compatible Vehicles: - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Golf Mk1 Cabriolet,Transporter T4

311-867-169/6AW – Screw Cover Cap in Light Grey

Description: Screw cover cap in light grey. Used in various interior applications in a T25 model

Compatible Vehicles: - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25

311-867-235 – Cover Cap 32.5mm

Description:

Cover cap 32.5mm. This cap has various uses across many models. Some of which we have listed below

Mk1 and 2 Golf - Used in the underside of the bonnet, 2 required

Corrado - Used in the underside of the bonnet, 2 required

Beetle - Used in the spare wheel well

T25 - Used in the rear floor assembly, 1 required

Baywindow - Used in the pedal assembly on automatic models, q required

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 USA (1985,1986,1987,1988,1989,1990,1991,1992) - Jetta (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Polo Mk1/Mk2,Scirocco,T25,T2 Bay

311-867-549 – Headliner Clip For Sun Roof

Description:

Headliner clip for sunroof models. You will need 6 clips in total, these are sold individually.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: T2 Bay,Type 3

311-867-649 – Headlining Tension Wire End Cap

Description:

Secures ends of tensioning wires
Helps hold headliner in position
Durable and easy to install

This end cap is designed to fit onto the ends of headliner tensioning wires, securing them firmly in place. It plays a key role in keeping the headliner taut and properly aligned, ensuring a neat and professional interior finish. Ideal for restoration or replacement work.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1,Jetta,Scirocco

311-881-213 – Type 3 Inner Seat Guide, 335mm

Description:

Inner seat guide. The inner is the rail attached tot he tunnel. To fit up to chassis number >>312 213 3000

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-881-215 – Type 3 Outer Seat Guide, 290mm

Description:

Outer seat guide. To fit up to chassis >>312 213 30000

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-881-247 – Front Seat Tilt Lever Securing Clip

Description:

Securing clip for the front seat tilt handle.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T4 (1991,1992,1993,1994,1995,1996) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Superseded by: 6H0-881-635

Additional Vehicle Info: 911,912,924,928,930,944,964,968,Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,Transporter T4,T2 Bay,Type 3

311-898-209 – Door Handle Seal Set of 4

Description:

Includes seals for both outer door handles
Faithful reproduction of original parts
Helps prevent water ingress into doors

This door handle seal set is a must-have for any restoration project or as a direct replacement for missing or worn-out seals. Designed specifically for all pre-1967 Volkswagen Type 3 models, these seals are an excellent reproduction of the original parts, ensuring a snug fit and authentic appearance.

Each set includes both seals for both outer door handles, helping to minimise water ingress and protect your vehicle’s interior. For a complete seal refresh, don’t forget to check out the matching lock seals (part number 311-837-277), available as a pair.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Notes:

Set Includes;

x2 311-837-209

x2 311-837-221

Additional Vehicle Info: Type 3

311-898-321/D – Rear Quarter Window Seals Squareback

Description:

Rear Side Quarter window seals for Squareback models for the Squareback

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-899-115 – Bush Body Mount to Front Beam Clamp Upper

Description:

Body mount to front beam clamp upper bush. Sold individually, 2 required per vehicle.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-899-117 – Bush Body Mount to Front Beam Clamp Lower

Description: Body mount to front beam clamp lower bush. Sold individually, 2 required per vehicle.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-899-131/ / – Washer for Body to Chassis Bolts

Description:

Fits between body and chassis mounting bolts
Distributes load and prevents damage
Sold individually,
you will require 22

This washer is designed for use with body-to-chassis mounting bolts, helping to evenly distribute the load and protect surrounding surfaces from wear or deformation.

Ideal for restorations or replacing missing hardware, it ensures a secure and stable connection between body and chassis. Sold individually – check your vehicle’s requirements for correct quantity.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:22 Required for Beetle/Ghia. 24 Required for Type 3. 26 Required for Type 181.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

311-899-155 – Rear Subframe Bush

Description:

Body to sub-frame chassis mounting bush, lower. Suitable for all years of Type 3.

Compatible Vehicles: - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-899-165 – Square Support Washer for Rear Chassis Mount

Description:

Square support washer for rear chassis mount

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1970,1971)

Additional Vehicle Info: Beetle

311-903-137/B – Fan Belt 10x1000mm for Dynamo

Description:

The fan belt for the standard dynamo installation on 12 volt vehicles.

Note the Type3 was never factory fitted with an alternator.

Compatible Vehicles: - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-905-100 – Steering Column Plug

Description:

This is a plug that goes on the side of the steering column to cover the hole for the electrical ignition wires. This is one time use plug so once you push it in you can no longer use it again.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Type 3

311-905-295/A – Condenser for 1200-1600cc Distributor with Round Hole

Description:

Standard condenser to fit 1200-1600cc distributors with a round hole in the bottom of the distributor.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T2 Split Bus (1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

311-905-295/ABQ – Condenser for 1200-1600cc Distributor with Round Hole

Description:

BOSCH condenser to fit 1200-1600cc distributors with a round hole in the bottom of the distributor.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Karmann Ghia (1964,1965,1966,1967,1968,1969,1970) - T2 Split Bus (1964,1965,1966,1967) - Type 3 (1964,1965,1966,1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

311-905-295/C – Condenser for 1200-1600cc Distributor with Round Hole

Description:

Standard condenser to fit distributors with a round hole in the side of the distributor. Also fits reproduction 009 distributors.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973) - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973) - Karmann Ghia (1970,1971,1972,1973) - Type 3 (1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

311-905-295/CBQ – Condenser for 1200-1600cc Distributor with Round Hole

Description:

Genuine condenser to fit 1200-1600cc distributors with a round hole in the side of the distributor.
Also fits reproduction 009 distributors.

Compatible Vehicles: - Beetle Australia (1971,1972,1973) - Beetle (1971,1972,1973) - Beetle Cabrio (1971,1972,1973) - Beetle Brazil/Fusca (1971,1972,1973) - Beetle Mexico (1971,1972,1973) - Beetle USA (1971,1972,1973) - Karmann Ghia (1971,1972,1973) - Type 3 (1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3

311-905-429/A – Ignition Lead Cap Seal

Description:

Cap Seal to Ignition Lead to Distributor Cap or Coil

For standard HT lead to Bakelite plug cap these are to big

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

311-905-865/A – Ignition Switch

Description:

Durable metal body for long-lasting performance
Features 4 wires for easy electrical connection
Located behind the lock cylinder for key insertion

This ignition switch is designed for reliability and durability, featuring a robust metal body that can withstand wear and tear over time. It is located behind the lock cylinder where the ignition key is inserted, playing a crucial role in starting your vehicle by connecting the necessary electrical circuits.

With 4 wires included, the switch ensures a secure and efficient electrical connection to power your ignition system. If you’re replacing a faulty or worn ignition switch, this product is a direct and dependable replacement, helping to restore proper functionality to your vehicle’s starting system.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1968,1969,1970) - Beetle Cabrio (1968,1969,1970) - Karmann Ghia (1968,1969,1970) - 914 (1970) - Type 3 (1968,1969,1970)

Notes:

To suit: Beetle 68-70, 1200 models continued to use this switch for several years after, check your old switch. Karmann Ghia 68-70. Baywindow 68-70. Type 3 68-70.

witch terminal numbers: 30 - Battery Power from Headlight Switch (Red wire). 15 - Power to Fuse Box (Black wire). 50 - Power to Starter (Red and White wire). P - Parking Position Power (Grey wire. NOTE: This is not used, so can be cut off at the terminal). VW Factory Colour Coding_ 30 - Red 15 - Black 50 - Black w/Red Stripe

Additional Vehicle Info: 914,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

311-906-041/A – Cylinder Head Temperature Sensor

Description:

Cylinder head temperature sensor for fuel injected engines, US specification. Screw in sensor and lead. This part is NOT used on Mexican or Brazilian fuel injected engines.

To fit:
Volkswagen fuel injected models -
Beetle, engines AJ071683>
Karmann Ghia, engines AJ071683>
Baywindow 1.8L, engines ED000640>
Baywindow 2L, engines GD000001>
Baywindow 2L, engines GE000001>
T25 2L CV engine code
Porsche
914 1970-1971
914 1972-1973 1.7L
914 1974-1976
912 1976

Compatible Vehicles: - T2 Bay (1977,1978,1979) - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 3 (1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Notes:

M10x.1

Additional Vehicle Info: 912,912E,914,Beetle,Beetle Cabriolet,T25,T2 Bay,Type 3

311-906-105 – Grommet for Wiring Loom Cone Shaped

Description:

Cone shaped grommet for the front of loom.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1960,1961,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,T2 Bay,Type 3

311-911-023/DX/ – Starter Motor ,12v, Manual Gearbox

Description:

Standard 12V replacement starter motor
Reliable performance for everyday use
Easy installation with a precise fit

This 12V starter motor is a dependable replacement for worn or faulty units. Designed for consistent performance, it ensures smooth engine starts in various conditions.

Built for durability, it fits seamlessly into compatible vehicles, making installation simple. Whether replacing an old starter or upgrading, this motor provides a practical solution for keeping your engine running efficiently.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1967) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Notes:Does not include starter bush. A new armature bush (113-301-155) must be used when replacing your starter motor. We recommend fitting starter motor bolt 111-199-101/B, Due to the smaller diameter body of modern starter motors, original D-head bolts may not be suitable. Please also check the condition of your wiring - most reported faults in new starter operation are due to old wiring from the ignition switch producing low voltage at the starter motor solenoid.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

311-911-023/DX/ALT – Starter Motor 12 Volt Manual Gearbox

Description:

Brand new unit, no core exchange required
Designed for smooth, efficient starts
A new armature bush (113-301-155) must be used when replacing your starter motor

This brand new 12-volt starter motor provides reliable power without the need for an exchange unit. Designed for dependable, smooth starts, it's a perfect replacement for ageing or faulty starters, ensuring consistent engine ignition every time.

Built for durability, this starter motor offers high-quality performance for a wide range of vehicles, delivering long-lasting dependability with minimal hassle

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

311-911-023/DX/H – Starter Motor, 12 Volt, Manual Transmission

Description:

High-quality 12V replacement starter motor
Compatible with manual transmission vehicles
Ensures reliable starting performance

This 12V starter motor is designed as a direct replacement for vehicles equipped with a manual transmission. Offering excellent reliability and durability, it ensures smooth and efficient engine starting every time.

Ideal for those seeking a high-performance and dependable starter motor, this part is engineered to meet or exceed OEM specifications. Whether you're repairing or replacing your starter, this motor guarantees optimal functionality and longevity for your vehicle.

Notes:A new armature bush (113-301-155) must be fitted into the gearbox when fitting (included).We recommend fitting starter motor bolt 111-199-101\/B, if you use you half-moon\/D starter bolt it will just spin.Please also check the condition of your wiring - most reported faults in new starter operation are due to old wiring from the ignition switch producing low voltage at the starter motor solenoid. You can check if non-operation is due to a wiring issue by testing with a feed direct from the battery. If in doubt then seek professional advice.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

311-911-023/GEN – Starter Motor 12 Volt for Manual Gearbox

Description:

Reliable Bosch quality for smooth, efficient starting
One stud hole may be larger than the original, but does not affect alignment
Original D head bolt may not lock against the side of the body

The Bosch Standard New-Style 12 Volt Starter Motor is an excellent replacement option for classic air-cooled VW models, offering reliable performance and easy starting. This starter motor features Bosch’s trusted quality, ensuring long-lasting durability for your vehicle. While one stud hole may be slightly larger than the original, it will not affect the alignment or performance of the starter motor. Additionally, the original D head bolt may not lock against the side of the body, but this does not impact the function.

This starter is also compatible with Brazilian Kombi Aircooled models, making it a versatile option for those restoring or maintaining their VW vehicles. Please note, this starter motor will not fit watercooled models. It's an ideal choice for those looking to keep their air-cooled engine running smoothly with minimal hassle.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1967) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Notes:A new armature bush (113-301-155) must be fitted into the gearbox when fitting..We recommend fitting starter motor bolt 111-199-101\/B, if you use you half-moon\/D starter bolt it will just spin.Please also check the condition of your wiring - most reported faults in new starter operation are due to old wiring from the ignition switch producing low voltage at the starter motor solenoid. You can check if non-operation is due to a wiring issue by testing with a feed direct from the battery. If in doubt then seek professional advice.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

311-919-051 – Fuel Gauge Sender Unit

Description:

Restores accurate fuel level readings
Ideal replacement for faulty senders
Easy fix for a non-functioning fuel gauge

Stop guessing how much fuel is left in your tank! A faulty fuel gauge sender unit can lead to uncertainty on the road. By replacing the broken sender unit, you’ll restore your gauge’s functionality and ensure accurate fuel readings.

This high-quality replacement unit brings your dormant fuel gauge back to life, making it a reliable and essential upgrade for your vehicle. Perfect for maintaining safety and avoiding inconvenient fuel mishaps.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-941-039/F – Headlight Assembly for Left Hand Drive

Description:

Headlight assembly for left hand drive/ right hand traffic
Cover glass may need to be unclipped and rotated quarter of a turn for Baywindow fitment.
Type 3 from chassis number 310 2 000 001 (August 69)

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Baywindow USA (1968,1969,1970,1971,1972,1973) - Beetle Australia (1968,1969,1970,1971,1972,1973) - Beetle (1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1968,1969,1970,1971,1972,1973) - Beetle Brazil/Fusca (1968,1969,1970,1971,1972,1973) - Beetle Mexico (1968,1969,1970,1971,1972,1973) - Beetle USA (1968,1969,1970,1971,1972,1973) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,T2 Bay,Type 3

311-941-111/A / – Headlight Rim in Chrome with 3 Screw Holes

Description:

Headlamp rim for upright headlamps with 3 screw holes. OE quality, Hella or Bosch

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Beetle (1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1968,1969,1970,1971,1972,1973) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

230mm OD

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

311-941-111/AR – Headlight Rim, Chrome, 3 Screw Locating Holes

Description:

Chrome plated headlamp rim
3 screw locating holes
Ideal for sunny climates, requires regular maintenance

This standard chrome plated headlamp rim is designed for durability and style. Featuring three screw locating holes, it ensures a secure fit for your vehicle’s headlamp. The chrome finish provides a classic look, adding an elegant touch to your ride.

However, if you're located in a wetter climate, it's important to maintain the chrome by regularly applying wax polish to prevent rusting. This will help keep the rim looking great and preserve its quality over time.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Beetle (1968,1969,1970,1971,1972,1973) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

230mm OD

Additional Vehicle Info: Beetle,T2 Bay,Type 3

311-941-115/C – Headlight Lens Left Hand Drive

Description:

Glass headlight lens with left hand drive beam pattern. Sold individually, 2 required per vehicle.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Beetle (1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1968,1969,1970,1971,1972,1973) - Type 3 (1968,1969,1970,1971,1972,1973)

Notes:This lens fits to the reflector with a separate rubber seal. Some vehicles may have the later H4 style headlights with a fixed reflector and lens assembly, check your units, This lens is not a suitable replacement for the above. This lens is 183mm in diameter, some originals were 185mm, Please check before ordering.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

311-941-119/ / – Seal Headlight Lens to Reflector

Description:

Seals the edge of headlight glass to reflector
Sold individually for single headlamp replacement
Durable rubber construction for secure fit

This rubber headlamp glass seal is designed to fit the edge of your headlight glass, providing a tight seal against the headlight bowl or reflector. It helps keep moisture, dirt, and debris out, ensuring your headlamp stays clear and functioning properly.

Sold individually, this seal is perfect for replacing worn or damaged seals. Crafted from durable rubber, it offers a long-lasting and reliable solution for maintaining your vehicle’s headlight assembly. Whether you’re restoring or repairing, this seal ensures a secure and effective fit for your headlamp.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:These elastic rubber seals are manufactured flat, they need to be stretched around the edge of the glass with the ribbed side outward. Once fitted they from the same U shape as the originals being replaced.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

311-941-125/A – Spring Securing Clip Headlight Reflector to 3 Screw Rim

Description:

Spring securing clip that holds the lens and reflector to the back of the headlight rim. Sold individually, 10 required per vehicle.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Beetle (1968,1969,1970,1971,1972,1973)

Notes:For the 3 screw headlight units.

Additional Vehicle Info: Beetle,T2 Bay

311-941-141 – Headlight Adjusting Screw and Nuts Pair

Description:

Headlight adjusting screws for upright European spec headlights . Supplied as a pair.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

311-941-151/B/GEN – Headlight Reflector LHD

Description:

Standard front headlamp reflector.

For LHD vehicles

Notes:

These reflectors may come with only the holes for fitment to a Beetle, for Baywindow they may need an extra hole adding to the side so they can pivot in the correct direction.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

311-941-531/A – Headlight Switch

Description:

Headlight Switch with 4 connections, 30 x 3, 56, 58 and 58b.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)

Additional Vehicle Info: Beetle,Brazil Kombi,T2 Bay

311-941-581/C – Headlamp Relay 5 pin, 6V

Description:

6v headlamp relay

Compatible Vehicles: - Beetle (1966,1967) - Beetle Cabrio (1966,1967) - T2 Split Bus (1966) - Type 3 (1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Split,Type 3

311-943-121/A / – Number Plate Light Lens

Description:

Number Plate Light Lens

Compatible Vehicles: - Beetle (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,Type 3

311-943-121/A/KIT – Number Plate Light Assembly

Description:

Number plate light kit. Includes Lens seal and bulb holder.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

311-943-131/ / – Number Plate Light Lens to Housing Seal

Description:

Rubber number plate light gasket/seal.
Replace your perished seal with this top quality reproduction.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Type 3

311-943-169/A – Wiring Grommet for Number Plate Light

Description:

The grommet in the engine lid through which the licence plate light wire feeds.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

311-943-191 – Number Plate Light Housing to Engine Lid Seal for Fast and Notch Back

Description:

The rubber seal between the licence plate mount and the tailgate on the fastback and notchback.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-943-191/BQ – Seal Number Plate Light Housing to Rear Hatch Notch/Fastback

Description:

Number plate light housing to rear hatch seal.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:For Fastback and Notchback models only.

Additional Vehicle Info: Type 3

311-945-137/A – Rear Reflector Housing Seal, Left

Description:

Rear reflector housing seal, left

Compatible Vehicles: - Type 3 (1964,1965,1966,1967)

Additional Vehicle Info: Type 3

311-945-138/A – Rear Reflector Housing Seal, Right

Description:

Rear reflector housing seal, right

Compatible Vehicles: - Type 3 (1964,1965,1966,1967)

Additional Vehicle Info: Type 3

311-945-191 – Rear Light To Body Seal

Description:

Rear light to body seal

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969)

Additional Vehicle Info: Type 3

311-945-191/A /LR – Rear Light to Body Seals Pair

Description:

The rubber seals between the rear light lens and the bodywork. Supplied as a pair

Compatible Vehicles: - Karmann Ghia (1972,1973,1974) - Type 3 (1970,1971,1972,1973)

Additional Vehicle Info: Karmann Ghia,Type 3

311-945-223/P / – Rear Light Lens Flat Face Red Clear and Amber

Description:

Euro spec rear light lens with an amber, red, and white colour combination.

Compatible Vehicles: - Karmann Ghia (1957,1972,1974) - Type 3 (1971,1972,1973)

Additional Vehicle Info: Karmann Ghia,Type 3

311-945-281 – Reverse Light Cap Cover

Description:

Rubber cap cover for the back of the reverse light housing.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Bay,T2 Split

311-949-109/W – Side Marker Lens in Clear

Description:

Side marker lens in white

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-949-149/B – Grommet 13x5mm

Description:

A rubber grommet to protect wire or cable.
This non exhaustive list includes,
Beetle and Golf/Jetta/Polo mk1 reversing light cable,
high volume horn wire T2 bay,
pipe for windscreen washer under dash T25,
and cable for heater valve on T4.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Karmann Ghia,Scirocco,Transporter T4,T2 Bay,Type 3

311-953-152 – Front Indicator Lens to Base Seals Pair

Description:

The rubber seals for the front indicator lens to indicator mount Supplied as a pair.

Compatible Vehicles: - Karmann Ghia (1964,1965,1966,1967,1968,1969) - Type 3 (1962,1963,1968,1969)

Additional Vehicle Info: Karmann Ghia,Type 3

311-953-153 – Front Indicator Lens to Base Seals Pair

Description:

The rubber seal for the base of the bullet indicator to the body of the car.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969)

Additional Vehicle Info: Type 3

311-953-153/B – Front Indicator Lens to Base Seals Pair

Description:

The rubber seals for the base of the indicator to the body of the car. This is for European specification models

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Type 3

311-953-161 – Bullet Front Indicator Lens Amber

Description:

Bullet shaped amber indicator lens

Compatible Vehicles: - Karmann Ghia (1964,1965,1966,1967,1968,1969) - Type 3 (1962,1963,1964,1968,1969)

Additional Vehicle Info: Karmann Ghia,Type 3

311-953-161/CL – Bullet Front Indicator Lens Clear

Description:

Bullet shaped clear indicator lens

Compatible Vehicles: - Karmann Ghia (1964,1965,1966,1967,1968,1969) - Type 3 (1962,1963,1968,1969)

Additional Vehicle Info: Karmann Ghia,Type 3

311-953-513/B – Indicator Switch, Black

Description:

High-quality replacement part
Restores proper indicator function
Perfect fit for worn or faulty switches

This black indicator switch is an ideal replacement for worn or malfunctioning switches, ensuring your vehicle’s indicators work smoothly and reliably. Its durable construction guarantees long-lasting performance, giving you peace of mind on the road.

Designed for easy installation, this switch offers a precise fit and restores the full functionality of your vehicle's indicator system. It's a practical and affordable solution to keep your car's signaling in top condition.

Compatible Vehicles: - Beetle (1968,1969,1970) - Beetle Cabrio (1968,1969,1970) - Karmann Ghia (1968,1969,1970) - Type 3 (1968,1969)

Notes:

8 Wire:
Brown
Brown/White
Black
Black/White
Black/Green
Red/Black (on some cars this is Yellow/Black)
Grey
Blue/Black

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

311-955-243/A – Wiper Spindle Retaining Nut

Description:

Standard windscreen wiper shaft retaining nut.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

311-955-255 – Wiper Spindle Washer

Description:

Fits most standard windscreen wiper systems
Durable and rust-resistant metal construction
Easy to install with secure fit

This windscreen wiper spindle washer is designed to provide a reliable connection between your wiper arm and spindle. Built to withstand regular use and harsh weather conditions, it ensures smooth operation and lasting performance. Ideal for quick replacements, it helps keep your wiper system working efficiently.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay

311-955-261/A / – Wiper Spindle to Body Seal

Description:

Ensures a tight seal between spindle and body
Sold individually, 2 required per vehicle
Located between front panel and outer spindle shaft

This windscreen wiper spindle to body seal is designed to prevent water, dirt, and debris from entering the wiper mechanism, helping maintain optimal performance. Positioned between the front panel of the body and the outer spindle shaft, it provides a secure and reliable seal for the wiper assembly.

Sold individually, two seals are required per vehicle for proper installation. Replacing worn or damaged seals is essential for keeping the wiper system functioning smoothly and preventing rust or damage to the surrounding areas. Durable and easy to install, this seal ensures long-lasting protection for your windscreen wiper setup.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1970,1971,1972,1973,1974,1975,1976,1977) - Beetle Cabrio (1970,1971,1972) - Karmann Ghia (1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Beetle 70-79 including 1302. Karmann Ghia 70-74. Baywindow 68-79. Type 3 62-73.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

311-955-425/AY – Wiper Blade 13 inch Silver

Description:

13" silver windshield wiper kit fitting all Type 3 and Type 34 models from 1961 to 1974.

Kit includes 2 wiper blades.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

311-955-540/A – Wiper Arm and Blade Kit Silver

Description:

Wiper arm & blade kit fitting Type 3 & Type 34 models from 1961 to 1967. Includes silver arms and silver blades.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Type 3

311-955-541 – Wiper Arm Silver

Description:

Wiper arms fitting Type 3 & Type 34 models from 1961 to 1967.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Notes:Visually correct for 1961-1966 but fits 1967 Type 3 models as well.

Additional Vehicle Info: Type 3

311-955-979/B / – Cap & Valve Windscreen Washer Bottle

Description:

Faithful reproduction of the original part
Regulates screen washers and spare wheel pressure
Not suitable for 1302 or 1303 models

This windscreen washer bottle filler cap and valve is a replica of the original, crafted to ensure the perfect fit and function for your vehicle. It maintains the necessary pressure for the screen washers while regulating the minimum pressure in the spare wheel, ensuring your washer system operates smoothly and effectively. Built to original specifications, it provides a reliable replacement for worn or damaged caps.

Please note, this cap and valve are not suitable for 1302 or 1303 models. Whether you're restoring your vehicle or simply maintaining its functionality, this high-quality replica part ensures your washer system is always ready when needed.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972) - Karmann Ghia (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Notes:Screws on to the windscreen washer bottle filler neck, the other end screws onto the spare wheel valve on standard models, or to the washer bottle bracket on 1302/03 models. On 1302/03 models there is then another connecting hose that is attached to the tyre valve. This item differs from the original spec: the tyre connector must be removed before releasing the bottle cap to top up washer fluid.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

311-971-010 – Wiring Loom Main Loom Only

Description:

Main wiring loom for type 3 63-67 models. Can also be used on 68-69 models with carburettor

Compatible Vehicles: - Type 3 (1963,1964,1965,1966,1967,1968,1969)

Additional Vehicle Info: Type 3

311-971-225/C – Positive Battery Cable

Description:

High-Quality Construction: Durable cable with OE battery terminal.
Reliable Performance: Ensures optimal electric connectivity.
Easy Installation: Features crimped connectors for a secure fit.

The Positive Battery Cable is designed to maintain your vehicle's electrical system in peak condition. Featuring an Original Equipment (OE) battery terminal and robust crimped connectors, this cable ensures reliable connectivity and performance. Whether you're replacing an old cable or upgrading your setup, this product is essential for keeping your vehicle's electrics functioning smoothly.

With its durable construction and user-friendly design, the Positive Battery Cable is built to withstand the demands of daily driving. It provides peace of mind knowing your vehicle’s electrical components are connected securely, allowing for efficient power distribution. Invest in this essential cable to enhance the longevity and reliability of your vehicle’s electrical system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Suitable for use on 6 and 12 volt electrical systems.

Wire lengths

Fat wire - 890mm

Thin Wire - 1220mm

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,T2 Split,Type 3

312-941-039/D / – Headlight Assembly, Right Hand Drive

Description:

Complete headlamp for right-hand drive vehicles.
Includes all essential components for easy installation.
Durable design ensures reliable and long-lasting performance.

This standard headlamp is designed specifically for right-hand drive vehicles, providing optimal illumination for safe driving. It comes fully equipped with a reflector, headlamp rim, adjusting screws, bulb holder, and high-quality glass, making it a comprehensive lighting solution. The design ensures compatibility and ease of installation, whether for replacement or restoration purposes.

Built for durability and consistent performance, this headlamp is an excellent choice for those seeking reliable lighting. Its all-in-one construction simplifies the installation process, while the sturdy components ensure the headlamp stands up to various driving conditions.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Beetle (1967,1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:When fitted to a Baywindow, the glass and reflector will need to be rotated through 90 degrees to correctly place the beam in a horizontal position.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

312-941-039/DR – Headlight Assembly, Left Hand Drive

Description:

Designed for left hand drive vehicles
Includes reflector, headlamp rim, and adjusting screws
Durable glass for optimal performance

This standard front headlamp unit is specifically designed for left-hand drive vehicles. It features a complete assembly with a high-quality reflector, headlamp rim, and adjustable screws for easy installation.

The durable glass ensures clear visibility and reliable performance, making it an ideal replacement for worn-out or damaged headlamp units. This headlamp unit is built to meet all necessary vehicle standards for safety and efficiency.

Notes:The headlamp glass is left hand drive and will require right hand drive glass to be fitted for UK roads.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

312-941-115/B – Headlight Lens for Right Hand Drive

Description:

Headlight glass for European right hand drive vehicle

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973) - Beetle (1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1968,1969,1970,1971,1972,1973) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

312-941-151/B / – Headlight Reflector

Description:

Standard front headlamp reflector suitable for halogen conversion bulbs only. These items are reproduction quality and may have some scratches on the reflector surface. For top quality version, please see 312-941-151/B/GEN

170mm diameter

Notes:These reflectors are left hand drive, they will need an extra hole adding to the side to enable them to pivot in the correct direction for right hand drive vehicles.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

312-941-151/B/GEN – Headlight Reflector RHD

Description:

Standard front headlamp reflector.

For RHD vehicles

Notes:These reflectors may come with only the holes for fitment to a Beetle, for Baywindow they may need an extra hole adding to the side so they can pivot in the correct direction.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,Type 3

313-877-375/B – Sunroof Guide Centre Upper Cover

Description:

Precision-fit for seamless sunroof operation
Protects and conceals the sunroof guide mechanism
Durable construction for long-lasting performance

Enhance the functionality and appearance of your vehicle’s sunroof with this Upper Centre Sunroof Guide Cover. Designed to fit perfectly, it ensures smooth and reliable sunroof operation while protecting and concealing the guide mechanism.

Crafted from durable materials, this cover provides long-lasting performance and helps maintain the integrity of your sunroof system. It’s an essential component for preserving the aesthetic and functional quality of your vehicle’s sunroof.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Type 3

313-877-407 – Drive Pinion Gear for Metal Sunroof

Description:

Drive pinion gear for factory fitted metal sliding sunroof, excl 1303

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,T25,T2 Bay

313-877-465/581 – Escutcheon Cover for Sunroof Winder Handle

Description:

Escutcheon cover in white for sunroof winder handle

Additional Vehicle Info: Beetle,Golf Mk1,Jetta,Scirocco,T25,T2 Bay,Type 3

315-198-163/A – Piston ring set, 1500 83mm

Description:

Piston ring set for 1500 Aircooled engines.
May not fit original pistons from 1962-65

Also fits AC198800 83x64 1384cc Barrel and piston set

Bore 83mm

Top ring 2mm

Middle ring 2mm

Bottom ring 4mm

Compatible Vehicles: - Beetle (1967,1968,1969,1970) - Beetle Cabrio (1967,1968,1969,1970) - Karmann Ghia (1967,1968,1969,1970) - T2 Split Bus (1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970)

Notes:

83mm Piston Ring Set 2.0 x 2.0 x 4.0

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

315-845-521/BL – Rear Window Seal Notchback

Description:

Rear window seal with no provision for a chrome trim.

Compatible Vehicles: - Type 3 (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:For Notchback models only.

Additional Vehicle Info: Type 3

315-845-521/C – Rear Window Seal Deluxe Notchback

Description:

Rear screen seal with a provision for chrome trim. For Notchback model

Compatible Vehicles: - Type 3 (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

315-853-305 – Deluxe Trim Frame for Windscreen Rubber

Description:

Trim frame for the windscreen. pair.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3