Fitment #32

113-301-185/A – O-Ring Seal Final Drive Cover

Description:

Seals final drive cover to prevent oil leaks
Precision fit for secure, leak-free performance
Made from oil- and heat-resistant rubber

This O-ring is designed specifically for sealing the final drive cover on classic VW transmissions. It ensures a tight, reliable seal between the cover and the transmission housing, preventing gear oil leaks and maintaining proper lubrication.

Manufactured from high-quality, oil-resistant rubber, this O-ring is built to withstand the heat and pressure of transmission operation. A must-have for gearbox rebuilds or maintenance on air-cooled VW drivetrains.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - 911 (1969,1970,1971) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

924 4 speed transmission only

Additional Vehicle Info: 911,914,924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-301-189/F – Gearbox Output Flange Seal, IRS Suspension

Description:

Easy to install
Reliable seal
Fits IRS suspension models

This gearbox output flange seal is designed for models with IRS suspension. It's easy to install and provides a reliable seal, helping to maintain your vehicle's gearbox integrity and prevent leaks. Ideal for ensuring smooth and efficient operation.

To fit

Beetle 8/67-7/79

Karmann Ghia 8/67-7/74

Type 3 8/67-7/73

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Notes:Supersedes 113-301-189\/A & 113-301-189\/C (60x36x9mm)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-301-191 – Gasket, Locates Between Gear Carrier and Gearbox Case

Description:

Gasket seal, locates between the gear carrier and the gearbox case

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-301-195 – Locking Ring Washer for Drive Flange

Description:

Locking ring washer for the drive flange cover plate located on the side of the gearbox

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Karmann Ghia,T25,T2 Bay,Type 3

113-301-205/FG – Gearbox Nose Cone

Description:

Gearbox nose cone.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-301-257 – Gearbox Mounting Bolt

Description:

Rear gearbox mount bolt (frame horn bolt) for all models with an early rear gearbox cradle.
Will fit 73-79 T1 models if early cradle and mounts are used.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968)

Notes:

Bolt measurements: 27mm Hex nut, 51mm Total length, 1.5 Thread, 39mm Shaft length, 27mm Length thread, 14mm Smooth thread.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-301-263/A – Gearbox Mount, Rear

Description:

Fits between gearbox and rear gearbox cradle
2 mounts required per vehicle
Sold individually

This rear gearbox mount is designed to fit between the gearbox and rear gearbox cradle, ensuring secure and stable positioning. Two mounts are needed for each vehicle, and each mount is sold individually.

To fit
Beetle 8/52-7/72
Karmann Ghia 8/56-7/72
Splitscreen 8/55-7/67
Brazil Kombi 96-2005

Compatible Vehicles: - Beetle (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Beetle Cabrio (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-301-263/AR – Rear Gearbox Mount

Description:

Mounts between gearbox and rear cradle
Helps isolate vibration and secure drivetrain
Supplied individually – 2 required per vehicle

This rear gearbox mount is designed to fit between the gearbox and the rear gearbox cradle, providing essential support and vibration isolation for the drivetrain. It helps maintain proper alignment and reduces stress on surrounding components.

Sold individually, with two required per vehicle, this mount is a key component for ensuring smooth operation and longevity of your transmission system—ideal for maintenance or restoration projects.

Compatible Vehicles: - Beetle (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-301-263/C / – Rear Gearbox Mount Left

Description:

A good quality reproduction left rear gearbox mount.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-301-263/CR – Rear Gearbox Mount Left

Description:

Rear gearbox mount to fit the left hand side

If your gearbox mount has seen better days then it is probably a good idea to replace it. not only will gear changes become smoother, but you will also improve your driving experience. a good quality reproduction mount that will give you years of trouble free service.

Compatible Vehicles: - Baywindow USA (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay

113-301-264/ / – Rear Gearbox Mount Right

Description:

A good quality reproduction right rear gearbox mount.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-301-264/R – Rear Gearbox Mount Right

Description:

Rear gearbox mount to fit the right hand side

If your gearbox mount has seen better days then it is probably a good idea to replace it. not only will gear changes become smoother, but you will also improve your driving experience. a good quality reproduction mount that will give you years of trouble free service.

Compatible Vehicles: - Beetle Australia (1972,1973,1974,1975,1976) - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1972,1973,1974,1975,1976,1977,1978) - Beetle Mexico (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia

113-301-265/A – Front gearbox Mount Automatic

Description:

Front gearbox mount for automatic gearboxes

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972) - Beetle Cabrio (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-301-265/E / – Front Gearbox Mount

Description:

A good quality reproduction front gearbox mount.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974) - Type 3 (1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-301-265/ER – Front Gearbox Mount

Description:

Front gearbox mount.

If your gearbox mount has seen better days then it is probably a good idea to replace it. not only will the gear changes become smoother, but you will also improve your driving experience. A good quality reproduction mount that will give you years of trouble free service.

Compatible Vehicles: - Beetle Australia (1972,1973,1974,1975,1976) - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1972,1973,1974,1975,1976) - Beetle Mexico (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia

113-311-113/A / – Oil Seal, Gearbox Input Shaft

Description:

Durable oil seal for gearbox input shaft
Prevents leaks and ensures smooth operation
High-quality material for long-lasting performance

This oil seal is designed to protect the gearbox input shaft by preventing fluid leaks and keeping contaminants out. Made from high-quality materials, it ensures reliable sealing and helps maintain smooth transmission performance over time.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971) - 914 (1970,1971,1972,1973,1974,1975,1976) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

22.2x40x12mm

Additional Vehicle Info: 356,911,914,Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,Transporter T4,Trekker,T25,T2 Bay,T2 Split,Type 3

113-311-113/AB – Gearbox Input Shaft Oil Seal

Description:

Easy to install
Reliable seal
Fits gearbox input shaft

This oil seal is designed for the gearbox input shaft. It's easy to install and provides a reliable seal, helping to prevent leaks and maintain the efficiency of your vehicle's gearbox. Ideal for ensuring smooth operation and protecting your transmission system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971) - 914 (1970,1971,1972,1973,1974,1975,1976) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 356,911,914,Beetle,Beetle Cabriolet,Buggy/Baja,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,Transporter T4,Trekker,T25,T2 Bay,T2 Split,Type 3

113-311-123/A – Bearing for Gearbox Main Shaft

Description:

Reduces gear whine caused by wear
Precision-engineered for reliable performance
Direct replacement for faulty bearings

The Bearing for Gearbox Main Shaft Front is a high-quality replacement part designed to restore your vehicle’s transmission performance. Commonly known to wear out over time, this bearing often causes a noticeable gear whine as it begins to fail. Addressing this issue early can prevent further damage to the gearbox and maintain smooth shifting.

With its durable construction, this bearing ensures long-lasting reliability. It is precision-engineered to fit seamlessly, making it an ideal replacement for worn or damaged bearings. Whether you're dealing with a whiny gear noise or just performing routine maintenance, this bearing offers a perfect solution for your gearbox repair needs.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-311-151/D – Thrust Washer for 4 Speed Input Shaft

Description:

Thrust washer for 4 speed input shaft

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-311-269/A – Synchro ring for 1st Gear

Description:

Synchro ring for 1st gear.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975) - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1965,1966,1967) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-311-269/B – Gearbox Synchro Ring for 2nd Gear

Description:

Gearbox synchro ring for 2nd gear

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-311-295/D – Synchro Ring for 3rd or 4th Gear

Description:

Compatible with 3rd or 4th gear
Durable and high-quality material
Ensures smooth gear transitions

This synchro ring is designed for 3rd or 4th gear, providing reliable performance in your transmission. Made from durable materials, it guarantees smooth shifting and long-lasting use. Perfect for maintaining optimal gear functionality in your vehicle.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975) - Beetle (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-311-375. – Gearbox Pinion Shaft Bearing

Description:

Needle Bearing and inner Race for all keyed transmission pinion shafts.

To fit
Beetle 61-68 up to Chassis 118 258 722
Split 61-67

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-311-531/A – Slider Gear for Reverse Gear 17 Teeth

Description:

Sliding wheel for reverse gear 17-teeth, coarse spline and conical sides

Compatible Vehicles: - Beetle (1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,Type 3

113-311-541. – Gearshift Hockey Stick with Straight Lever and Long Shaft

Description:

Straight lever arm with an upturned ball end for precise shifting
Designed for placement in the nose cone of the gearbox
Connects the gear shifter coupling to the gearbox shift forks

This gearshift hockey stick features the straight lever arm, meaning that the ball at the end of the arm is in line with the shaft. With a total length of 232mm, it’s designed to fit securely in the nose cone of the gearbox.

Its primary function is to link the shifter coupling to the gearbox shift forks, ensuring reliable performance and smooth shifting operations. Built for durability, it is an essential component for maintaining the efficiency of your vehicle’s transmission system.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1959) - T2 Split Bus (1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

Split from VIN 459 506 onwards (Mar '1959>>)

This is the hockey stick you will need for any split bus IRS or Straight axle conversion.

Also used when fitting a fully synchromesh transmission in to an pre 1960 Beetle, you will need to redrill the shifter coupling dimple. Also needed for the conversion is the split nose cone, part number 211-301-205/H

Additional Vehicle Info: Beetle,T2 Split

113-311-541/A – Gearshift Hockey Stick with Kinked Lever Arm

Description:

Kinked lever arm with an upturned ball end for precise shifting
Designed for placement in the nose cone of the gearbox
Connects the shifter coupling to the gearbox shift forks

This gearshift hockey stick features a unique kinked lever arm with a slightly upturned ball at the end, providing smoother and more controlled gear changes. With a total length of 170mm, it’s designed to fit securely in the nose cone of the gearbox.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972) - Type 3 (1962,1963,1964)

Notes:

Typ 181 to VIN 182-2482-841 (Dec '71)

Typ3 to VIN 0 433 785 (Apr '64)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker,T2 Split,Type 3

113-311-541/C – Gearshift Hockey Stick with Straight Lever Arm, Short

Description:

Straight lever arm with a ball end for precise shifting
Designed for placement in the nose cone of the gearbox
Connects the gear shifter coupling to the gearbox shift forks

This gearshift hockey stick features the straight lever arm, meaning that the ball at the end of the arm is in line with the shaft. With a total length of 170mm, it’s designed to fit securely in the nose cone of the gearbox.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - Karmann Ghia (1972,1973,1974)

Notes:

On IRS vehicles (1302/1302): January 1972 onwards

For all other vehicles please check against your old one.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,T25,T2 Split,Type 3

113-311-551/A – Gear Selector Fork 1st to 2nd

Description:

Selector fork between 1st & 2nd gear

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-311-561/C – Gearbox Selector Fork 3rd-4th

Description:

Gearbox selector fork 3rd-4th

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-311-571 – Gearbox Selector Fork for Reverse gear

Description:

Gearbox selector fork for reverse gear

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972) - Beetle (1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1968,1969,1970,1971,1972,1973) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Karmann Ghia (1968,1969,1970,1971,1972,1973) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-311-599 – Bung, Gearbox Housing

Description:

Bung for the gearbox housing, 3 required per vehicle.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T25,T2 Bay,T2 Split,Type 3

113-401-021/A – Front Axle Beam, Bare, LHD, see description for RHD

Description:

Bare front axle beam for king/link pin suspension systems
Fits LHD models; RHD possible with modifications
Requires additional components for full assembly

This bare front axle beam is designed for king and link pin suspension setups, tailored to fit left-hand drive vehicles. Right-hand drive conversion is possible by relocating the steering damper mount and adding the right-hand drive steering box stop (sold separately). It offers a versatile solution for restoring or customising your suspension system.

As a bare beam, additional parts are needed for installation, including needle bearings, bushes, and torsion arm seals. Check the cross-sales section for compatible components to complete your setup and ensure a smooth installation process.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965)

Notes:The beam must be greased thoroughly before use

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-401-021/D / – Bare Front Axle Beam, Left Hand Drive

Description:

Suitable for left-hand drive with ball joint suspension
Can be modified for right-hand drive compatibility
Bare beam; additional components required for assembly

This front axle beam is designed for left-hand drive vehicles with ball joint suspension. It can also be adapted for right-hand drive use by removing and rewelding the steering damper mount, along with purchasing the right-hand drive steering box stop (AC4013840).

Please note, this is a bare beam, so you'll need to purchase the upper and lower needle bearings, bushes to support the bearings, and torsion arm seals separately to complete the assembly.

Upper needle bearings 111-401-301 x 2
Lower needle bearings 311-401-301/C x 2
Bushes 131-401-313 x 4
Upper torsion arm seals 131-405-131 x 2
Lower torsion arm seals 131-405-129 x 2

Compatible Vehicles: - Beetle Australia (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Beetle Brazil/Fusca (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:The beam must be greased thoroughly before use

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

113-401-021/DR – Front Axle Beam, Ball Joint, Right Hand Drive

Description:

Compatible with right-hand drive vehicles
Includes needle bearings; no additional parts installed
Requires grease nipples and torsion arm seals

Upgrade your vehicle's suspension with our front axle beam designed specifically for right-hand drive models. This bare beam comes with needle bearings already installed, ensuring smooth operation. Please note that you'll need to add grease nipples and upper and lower torsion arm seals to complete the installation.

To ensure optimal performance, please order the following part numbers: grease nipples (N01-851-12 x 4), upper torsion arm seals (131-405-131 x 2), and lower torsion arm seals (131-405-129 x 2). With the right components, you'll enhance your vehicle's handling and reliability.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:The beam must be greased thoroughly before use

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Karmann Ghia

113-401-022 – Front Axle Repair Plates

Description: Front axle repair plates. Supplied as a pair for one per side. These locate between the upper and lower axle.

Compatible Vehicles: - Beetle Australia (1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996) - Beetle Mexico (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004) - Beetle USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet

113-405-311/D – Spindle for Disc Brakes Left

Description:

Left spindle for vehicles equipped with disc brakes.

Notes:This is a 1968 and later specification spindle. It will fit a 1966-1967 model but you will need to use these inner wheel bearings: 311-405-625/E And use these outer tie rod ends: 311-415-811/C & 311-415-812/C. Not for suitable for 1302 and 1303.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-405-311/E – Front Spindle for Drum Brakes, Left

Description:

OE reconditioned, reliable replacement part
Left-hand fit for drum brake vehicles
Restores smooth steering performance

This OE reconditioned standard steering spindle is designed to fit the left-hand side of vehicles equipped with drum brakes. Precision-engineered for a perfect match, it provides reliable performance and helps restore your vehicle's smooth and responsive steering control.

Ideal for those looking to maintain original driving conditions, this spindle meets strict quality standards and ensures a seamless fit, helping to extend the life of your steering system.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-405-312/D – Spindle for Disc Brakes Right

Description:

Right spindle for vehicles equipped with disc brakes.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-405-312/E – Front Spindle for Drum Brakes, Right

Description:

OE reconditioned, reliable replacement part
Right-hand fit for drum brake vehicles
Restores smooth steering performance

This OE reconditioned standard steering spindle is designed to fit the right-hand side of vehicles equipped with drum brakes. Precision-engineered for a perfect match, it provides reliable performance and helps restore your vehicle's smooth and responsive steering control.

Ideal for those looking to maintain original driving conditions, this spindle meets strict quality standards and ensures a seamless fit, helping to extend the life of your steering system.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-405-595/ / – Disc Brake Backing Plate not for 1302/3

Description:

Front brake backing plate for disc brakes to fit either the left or right side. This will fit all Beetles from 66-79 excluding 1302 and 1303 models

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-405-595/SS – Disc Brake Backing Plate Stainless steel

Description:

Front brake backing plate for disc brakes to fit either the left or right side. This will fit all Beetles from 66-79 excluding 1302 and 1303 models

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-405-615/A – Front Brake Drum, 5x205 Stud Pattern, Single

Description:

5x205 PCD stud pattern
Supplied individually; replace in pairs
Ensures reliable braking performance

Upgrade your vehicle's braking system with our front brake drum featuring a 5x205 PCD stud pattern. This drum is sold individually, but we recommend replacing both drums for balanced braking performance.

Crafted for durability and reliable operation, this brake drum helps maintain optimal braking efficiency and safety. Ensure your vehicle performs at its best by installing this good-quality component.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965) - Buggy/Baja (1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1958,1959,1960,1961,1962,1963,1964,1965)

Notes:It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

113-405-615/H – Front Brake Drum 4x130 Stud Pattern 1302/3

Description:

Front brake drum. This drum features a 4x130 stud patter. It is to fit 1302 and 1303 models only. Supplied each

Whilst we sell brake drums individually we would recommend that you change them in pairs.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-407-075/ / – Brake Disc, Front, 4x130, Single

Description:

Engineered for reliable braking
Sold individually; replace in pairs
Ideal for maintaining optimal brake performance

Ensure your vehicle's braking system operates at its best with our 4x130mm front brake disc. Each disc is engineered to provide reliable braking performance and safety.

Sold individually, we recommend replacing brake discs in pairs to maintain balanced braking and optimal performance. Trust this high-quality disc to keep your vehicle stopping smoothly and safely.

Notes:

Can be used to replace Mexican Beetle discs but you will need to discard the original hub from the two piece hub/disc set.

We recommend that you change your brake discs in pairs.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-407-075/BQ – Brake Disc Front 4x130 Pair

Description:

Front brake disc 4x130

Supplied in pairs

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Can be used to replace Mexican Beetle discs but you will need to discard the original hub from the two piece hub/disc set.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,Type 3

113-407-075/PD – Front Brake Disc 4x130, 278x9.5, Single

Description:

High-quality MEYLE PD for durability and performance
Excellent thermal resistance and noise reduction
Low-vibration driving and modern anti-corrosion coating

Upgrade your braking system with Meyle PD front brake disc, featuring a 4x130 PCD, 278mm diameter, and 9.5mm thickness. Each disc is supplied individually, but we recommend replacing in pairs for optimal performance. MEYLE PD brake discs are known for their perfect fit and durability, ensuring a reliable braking experience.

Designed to resist heat distortion and vibrations, these discs deliver exceptional driving comfort even under tough conditions. The advanced anti-corrosion coating maintains a sleek appearance and eliminates the need for degreasing during installation. Choose MEYLE PD for smooth, vibration-free braking and enhanced safety on the road.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-407-075/S – Brake Disc, Front, 4x4130, SEBRO, Beetle 67-79, Ghia 67-74

Description:

Front brake disc with 4/130mm stud pattern. For use with standard wheel bearings and brake caliper.

Can be used on T1 >65 when fitting disc brake dropped spindles

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Can be used to replace Mexican Beetle discs but you will need to discard the original hub from the two piece hub/disc set.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Type 3

113-407-165/ / – Front Disc Backing Plate for 1302/3

Description:

Front brake backing plate for disc brakes to fit either the left or right side. This will fit 1302 and 1303 models only

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-407-177/A – Eccentric Washer for Track Arm Adjustment

Description:

Eccentric washer for inner track arm adjustment
To fit 1302-1303 models

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-407-180 – Eccentric Bolt & Washer Front Suspension

Description:

Eccentric bolt and washer, used to adjust the camber on 1302 and 1303 front suspension.
Supplied in singles x2 required to do both sides

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:2 required per car

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-407-361/E – Ball Joint, Front, Lower, for 1302 & 1303, Standard

Description:

OE-quality front lower ball joint for 1302/1303 up to 1973
Precision fit and robust construction for smooth operation
2-year guarantee for added peace of mind and reliability

The Meyle standard front lower ball joint for 1302 and 1303 models up to 1973 (chassis >>133 3200 000) delivers exceptional performance with true-to-OE quality. Designed to provide a precise fit, this high-quality component ensures your vehicle operates smoothly and efficiently. Its robust construction means you'll experience fewer maintenance issues, allowing you to enjoy a more reliable driving experience.

With a 2-year guarantee, the Meyle ball joint offers peace of mind, affirming its durability and dependability. Trust in Meyle’s superior craftsmanship to maintain the safety and efficiency of your vehicle, making this investment a smart choice for long-lasting performance.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974) - Beetle Cabrio (1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-411-105/ 952 – Coil Spring for Front Suspension on 1302 & 1303 Models

Description:

Standard front suspension coil spring for 1302 & 1303 models

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-411-313/A / – Front Anti-Roll Bar Inner Bush 1302 & 1303

Description:

Front anti roll bar inner bush for 1302 and 1303 models

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-411-315 – Front Anti-Roll Bar Outer Bush 1302 & 1303

Description:

Front anti roll bar outer bush
To fit 1302 and 1303 models up to chassis >>133 2000 001 1970-07/1972

Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-412-031/D/BQ – Bilstein B6 Gas Strut Insert Front IRS Suspension

Description:

With over 60 Years of OEM Experience Bilstein Shock Absorbers Lead the Way in Performance and Durability
Performance Level: B6 – an upgrade over stock
Gas Pressurised to fit 1302 and 1303 suspension front >>133 3200 000

Bilstein shock absorbers, with their long-standing legacy in OEM quality and racing performance, lead the way in durability and reliability. The B6 model provides an enhanced upgrade in performance over stock, offering superior handling, stability, and comfort for VW Beetle and Ghia models.

With a collapsed length of 267mm and an extended length of 404mm, these shocks deliver the ideal balance of travel and control, making them perfect for everyday driving or more performance-oriented applications.

Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-412-031/DA/ – Front Suspension Strut Insert. Oil Filled, 1302 & 1303

Description:

Fits 1302 & 1303 models from 08/1970 to 07/1973
Improves suspension stability and handling
Easy installation for better ride comfort

This Front Suspension Strut Insert is specifically designed for the 1302 & 1303 models manufactured between August 1970 and July 1973. It is crafted to provide enhanced suspension performance, A quality product, ensuring a smoother and more comfortable ride. Over time, worn strut inserts can affect ride quality and handling, so replacing them with this high-quality part restores your vehicle's driving dynamics.

Engineered for precise fitment, the insert improves stability and control, especially during cornering and braking. It’s the perfect solution to maintain or restore your vehicle’s suspension system. Easy to install, it helps reduce the risk of further suspension-related issues, ensuring your vehicle performs as intended for years to come.

Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)

Notes:

Comes with new threaded cap for front strut

1303 Models - up to VIN 133 3003 655

1302 Models - up to VIN 133 3200 000

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-412-303/A – Bump Stop For Front Shock Absorber 1302 & 1303

Description:

Bump stop for front shock absorber to fit 1302 & 1303 models

Compatible Vehicles: - Beetle (1971,1972,1973) - Beetle Cabrio (1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-412-303/AF – Bump Stop For Front Shock Absorber 1302 & 1303

Description:

Bump stop for front shock absorber to fit 1302 & 1303 models

Compatible Vehicles: - Beetle (1971,1972,1973) - Beetle Cabrio (1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-412-305/ /01C – Protective Tube for Front Shock Absorber

Description:

Protective tube for front shock absorber to fit 1302 & 1303 beetle 1971-1979 and T25 1979-1980

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,T25

113-412-329/B – Top Mount For Front Strut, 1302 & 1303

Description:

Top mount to fit front suspension strut on 1302 & 1303 models from 1970-1973

Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-413-031/BQ – Bilstein B6 Gas Shock Absorber Front Ball Joint Suspension

Description:

With over 60 Years of OEM Experience Bilstein Shock Absorbers Lead the Way in Performance and Durability
Performance Level: B6 – an upgrade over stock
Gas Pressurised to fit Ball Joint suspension front

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-413-031/E – Standard Front Shock Absorber, Oil filled, 460-370mm

Description:

Standard oil-filled front shock absorber
Compressed length: 370mm, extended: 460mm
Supplied individually, replace in pairs for best performance

This front shock absorber is oil-filled and designed for reliable performance. With a compressed length of 370mm and an extended length of 460mm, it offers smooth operation and durability.

For optimal performance and even wear, it's recommended to replace the shock absorbers in pairs. This product is supplied individually, making it easy to purchase the exact quantity needed for your vehicle.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:Fitting kit for shock is part 131-498-441, not suitable for 1302\/3 models.

Additional Vehicle Info: Beetle,Karmann Ghia

113-413-031/E/S – Front Shock Absorber Oil Filled

Description:

Top quality reproduction by SSP
Compressed length: 370mm / Extended length: 460mm
Sold individually; replacing in pairs recommended
Designed for ball joint front suspension

This original style oil-filled shock absorber is a high-quality SSP reproduction designed for ball joint front suspension. It provides a perfect replacement with reliable performance at a great price. With a compressed length of 370mm and an extended length of 460mm, it matches the specifications of the original equipment.

For optimal handling and balance, it is recommended to replace shock absorbers in pairs, even though they are sold individually. Enhance your vehicle’s ride quality and suspension performance with this excellent replacement part.

Compatible Vehicles: - Beetle Australia (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Beetle Brazil/Fusca (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:Top mount kit for shock sold separately, part number: 131-498-441.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia

113-415-061/E – Steering Box 1302 & 1303 Left Hand Drive

Description:

Steering box to fit 1303 & 1303 left hand drive vehicles.
This is a brand new unit with no surcharge return.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974) - Beetle Cabrio (1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-303 – Centre Track Rod for 1302 & 1303 Models

Description:

Fits 1302 and 1303 models with strut front suspension
Replaces worn or bent rods for optimal safety
Prevents issues from rust or damaged ball joints

Upgrade your VW Beetle's steering system with this centre tie rod, designed specifically for 1302 and 1303 models from 1973 to 1979. This essential component connects the outer track rods to the steering box, ensuring precise steering and handling.

If your current tie rod is rusted or bent, attempting to straighten it can lead to further damage and unsafe driving conditions. Replace it with this new tie rod to avoid potential hazards from damaged threads or compromised integrity. Ensure your vehicle's steering is both reliable and safe with this direct replacement part.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974) - Beetle Cabrio (1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-441/F – Rubber Bush for Steering Idler Bracket

Description:

Rubber bush for the steering idler bracket to fit 1302 models up to chassis >>112 2575 326

Compatible Vehicles: - Beetle (1970,1971,1972) - Beetle Cabrio (1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-501/E – Steering Column Bare

Description:

Bare replacement steering column.

18mm spline steering column for 1974 onwards model Beetles. Uses a 24mm A/F nut to hold the steering wheel in place.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

113-415-585/A – Steering Column Bearing

Description:

Top steering column bearing including spring and washer.

Compatible Vehicles: - Beetle (1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1962,1963,1964,1965,1966,1967) - Buggy/Baja (1962,1963,1964,1965,1966,1967) - Karmann Ghia (1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

113-415-607/A – Steering Column Rubber Mount

Description:

Rubber bush for the lower mounting point on the steering column

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1994,1995,1996,1997,1998,1999) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Mexico,Karmann Ghia

113-415-660/A – Indicator Cancelling Ring including Horn Pick Up

Description:

Indicator cancelling ring with horn pick up.

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985) - Type 3 (1971,1972,1973)

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

113-415-660/AR – Indicator Cancelling Ring including Horn Pick Up

Description:

Indicator cancelling ring with horn pick up.

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

113-415-661/C – Cancelling Ring for Indicator

Description:

Indicator cancelling ring

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Type 3

113-415-669/B/BG – Horn Press with Black & Gold Wolfsburg Crest

Description:

Horn press with black and gold Wolfsburg crest to fit standard steering wheels with 'D' or double 'D' horn rings.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)

Notes:For black with silver crest see 211-415-669\/043

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-415-669/F / – Horn Push Black with Wolfsburg Crest

Description:

Black textured finish
Wolfsburg crest emblem
Fits original 4-spoke wheels

Enhance your driving experience with this stylish horn press, designed to fit original 4-spoke steering wheels. The black textured finish not only adds a touch of elegance but also ensures a comfortable grip. The standout feature is the Wolfsburg crest emblem, a symbol of quality and heritage, making it a perfect addition for any Volkswagen enthusiast.

Crafted with precision, this horn press is easy to install and built to last. Whether you're restoring a classic or upgrading your current vehicle, this accessory combines functionality with a nod to automotive history. Elevate your car's interior with this unique and practical enhancement.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1972,1973,1974) - Type 3 (1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,Type 3

113-415-801 – Tie Rod Left Hand Drive Short Adjustable Complete

Description:

Complete short tie rod including ends. For left hand drive Beetles from August 1961 to July 1965. Which are fitted with a steering damper.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends.

Please note that this is also suitable for pre '61 vehicles that originally came with a fixed length short tie rod.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-415-801/BARE – Tie Rod Bare Short Left Hand Drive

Description:

Bare short tie rod.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965) - Beetle USA (1961,1962,1963,1964,1965) - Karmann Ghia (1961,1962,1963,1964,1965)

Notes:For left hand drive Beetles between february 1961-1965

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-415-801/M – Tie Rod Left Hand Drive Short Complete

Description: Complete short tie rod including ends. For left hand drive Beetles from August 1961 to July 1965. Which are fitted with a steering damper.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-802 – Tie Rod Long Complete for Left Hand Drive

Description:

Tie rod, long, complete with tie rod ends to fit left hand drive Beetle from February 1961 to July 1965 fitted with a steering damper.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965) - Beetle USA (1961,1962,1963,1964,1965) - Karmann Ghia (1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-415-802/B – Tie Rod Bare Long Left Hand Drive

Description:

Bare long tie rod.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965) - Beetle USA (1961,1962,1963,1964,1965)

Notes:For left hand drive Beetles from February 1961 to 1965.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-813. – Tie Rod End Inner with Steering Damper Hole

Description:

Tie rod end with steering damper hole to fit the inner end of the long tie rod.
For vehicle up to chassis no 115 999 000.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965)

Notes:

M14 to tie rod, M10 to pivot

Additional Vehicle Info: Beetle,Karmann Ghia

113-415-813/D – Tie Rod End Inner for Long Rod with Steering Damper Hole

Description:

Tie rod end with steering damper hole
Fits Beetle and Ghia up to chassis no 118 857 239
Top-quality Meyle with a 2-year warranty

This tie rod end is designed for the inner end of the long tie rod and includes a steering damper hole. It is specifically made to fit Volkswagen Beetle and Ghia models up to chassis number 118 857 239, ensuring a perfect fit for these classic cars.

Crafted by Meyle, a trusted name in automotive parts, this tie rod end guarantees durability and performance. It comes with a 2-year warranty for added peace of mind, making it a reliable choice for maintaining your vehicle's steering system.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-821 – Inner Tie Rod End with Right Hand Thread for Short Tie Rod

Description:

Right-handed thread for secure connection
Compatible with vehicles up to chassis no. 118 857 239
High-quality Meyle product with a 2-year warranty

This inner tie rod end features a right-handed thread, designed to fit the inner end of the short tie rod for optimal performance. It is compatible with vehicles up to chassis number 118 857 239, ensuring a proper fit for a wide range of models.

Crafted by Meyle, a trusted name in automotive parts, this tie rod end offers durability and reliability. With a 2-year warranty, it provides peace of mind, ensuring you can rely on this product for your vehicle's steering system.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-835/ / – Rubber Boot Dust Cover, Steering Tie Rod End or Ball Joint

Description:

Replacement rubber boot for tie rod ends and ball joints
Compatible with Meyle tie rod ends and ball joints
Fits many other brands, but compatibility not guaranteed

This replacement rubber boot, or dust cover, is designed specifically for Meyle tie rod ends and ball joints. It provides a reliable solution to protect the internal components from dust and dirt, extending the lifespan of your steering system.

Although it is intended for use with Meyle products, this rubber boot may fit other manufacturers' parts. However, we cannot guarantee its compatibility with all tie rods or ball joints of the same application. Make sure to check fitment before installation.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:To fit Beetle & Bus Tie rod ends and Beetle 1303 models from 8/73> Ball joint boots. Polo tie rod ends

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Polo Mk1/Mk2,T2 Bay,T2 Split,Type 3

113-415-837 – Dust cap ring smallest tie

Description:

Dust cap ring for the tie rod. This is the smallest end

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Buggy/Baja (1950,1951,1952,1953,1954,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Buggy/Baja,Karmann Ghia,Polo Mk1/Mk2,T2 Bay,Type 3

113-415-951/B – Steering Box Shaft with Joints for 1302 & 1303

Description:

Steering box to column connecting shaft including universal joints.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974) - Beetle Cabrio (1970,1971,1972,1973,1974)

Notes:

For all 1302 & 1303 Beetle up to 1974

113-415-951/B

Length end to end 275mm

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-415-979/B / – Rubber Boot for Steering Universal Joint 1302 & 1303

Description:

Rubber boot for steering UJ Joint to fit 1302 & 1303 models up to chassis >>134 2999 000

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-425-021/A – Steering Damper for Beam Axle

Description:

Fits VW models from 1961 onwards (excluding 1302/1303)
Reduces steering wheel vibration for smoother driving
High-quality SSP reproduction at an affordable price

This Original Style Steering Damper is an excellent reproduction of the original part, designed to fit VW Beetles and Ghia manufactured from 1961 onwards, excluding the 1302 and 1303 models. If you're experiencing vibration through your steering wheel, it could be a sign that your damper is worn and in need of replacement. This top-quality damper restores your vehicle's steering performance, providing a smoother, more comfortable driving experience.

Crafted by SSP, this steering damper is a perfect replacement at a great price. It fits both left-hand and right-hand drive models, ensuring compatibility across a wide range of VW Beetles. By replacing your old damper, you can significantly improve steering control and reduce unwanted vibrations, making for a more enjoyable and safer drive.

Compatible Vehicles: - Beetle (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Karmann Ghia (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:For vehicles with beam axle, not for 1302 & 1303.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-425-021/AG – Steering Damper

Description:

Restores smooth steering action
Reduces vibration in the steering wheel
High-quality construction for durability

This top-quality steering damper is the ideal replacement if you're experiencing unwanted vibration through your steering wheel. Over time, dampers can wear out, leading to a rougher driving experience. Installing this unit will restore that smooth, flowing steering action you’re used to.

Please note, the retaining nut is not included with this damper. This durable part will help to improve your overall driving comfort and performance.

To fit
Beetle 62-79 excluding 1302 and 1303 models
Karmann Ghia 62-74

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

113-425-021/J – Steering Damper for 1302 or 1303

Description: Original style steering damper to fit left or right hand drive. This top quality SSP reproduction of the original steering damper is a perfect replacement at a great price.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975) - Beetle Cabrio (1970,1971,1972,1973,1974,1975)

Notes:For 1302 and 1303 models fitted with a steering box only. Will not fit models with rack and pinion steering.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-425-021/JG – Steering Damper, 1302 & 1303

Description:

Steering damper to fit 1302 and 1303 models.

If you are experiencing vibration through your steering wheel chances are that the steering damper has passed its best, replacing it with this top quality BOGE unit will help to bring back that smooth flowing steering action once again.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979)

Notes:

For 1302 and 1303 models fitted with a steering box only. Will not fit models with rack and pinion steering.

Additional Vehicle Info: Beetle

113-425-117 – Rubber Bush for Steering Damper

Description:

Rubber bush for steering damper.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:The bush will need to be pressed into the steering damper.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-498-002 – Tie Rod End Kit

Description:

Complete tie rod end kit for Beetle and Ghia up to mid-1968.
Includes all 4 tie rod ends. Fits up to chassis 118 857239 for Beetle & 148 857239 for Karmann Ghia

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-498-003 – Tie Rod End Kit

Description:

Fits both left & right-hand drive models
Includes all 4 tie rod ends
Compatible with Beetle & Karmann Ghia

This tie rod end kit is designed for mid-1968 onwards Beetle and Karmann Ghia models, including both left and right-hand drive configurations. It includes all four tie rod ends necessary for replacement and is specifically tailored to fit Beetles from chassis number 118 857240>> and Karmann Ghias from chassis number 148 857239>>.

Excluding the 1302 and 1303 models, this kit ensures a reliable fit and functionality for your classic vehicle. Heritage kits like this one are a great way to save time and money on essential maintenance.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-149/ / – CV Boot

Description:

Compatible with multiple vehicle models
Protects CV joints from dirt and moisture
Durable, flexible rubber construction

This CV boot is designed to fit a range of vehicle models—please refer to the fitment list below for specific applications. It provides essential protection for your CV joints, helping to extend their lifespan by keeping out contaminants and retaining lubrication. Ideal for maintenance or replacement, it ensures reliable performance and a secure fit.

Beetle 1302/1303 71-79
Karmann Ghia 68-74
Type 3 68-73
Mk1 Golf 1.6/D/TD
Mk2 Golf 1.6 / 1.8

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,Type 3

113-501-201/DF – Driveshaft Complete for IRS

Description:

Includes both CV joints and boots, pre-assembled
Ready to install, no additional parts needed
Sold individually for custom or replacement needs

This complete driveshaft assembly is designed for IRS setups, featuring both CV joints and boots already installed for convenience. The assembly comes pre-greased and ready to install, making it a hassle-free solution for restoring smooth power transfer to your vehicle's drivetrain.

Perfect for repairs or custom builds, this driveshaft assembly ensures reliable performance and durability. Sold individually, it offers flexibility for replacing one side or completing an entire setup.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-201/DVR – Driveshaft Complete for IRS

Description:

Includes both CV joints and boots, pre-assembled
Ready to install, no additional parts needed
Sold individually for custom or replacement needs

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Notes:For IRS models, 1302, 1303 and semi-automatic. Bolts = 893-407-237 Spreader plates = 113-501-329 sold separately.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-231 – Rear Stub Axle for IRS

Description:

Stock replacement rear stub axle.
To suit:

Beetle 68-79 IRS models
Karmann Ghia 68-74 IRS models
Type3 68-73 IRS models

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-277/A – Wheel Bearing, Rear Outer for IRS

Description:

This wheel bearing replaces the outer wheel bearing on VW Beetle, Karmann Ghia, VW Type 3 & Kubel Type 181, 924/944 with IRS rear axle.

Price sold as each.

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-277/A/BQ – Wheel Bearing, Rear Outer for IRS

Description:

This wheel bearing replaces the outer wheel bearing on VW Beetle, Karmann Ghia, VW Type 3 & Kubel Type 181, 924/944 with IRS rear axle.

Price sold as each.

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-283 – Wheel Bearing, Rear Inner for IRS

Description:

This wheel bearing replaces the inner wheel bearing on VW Beetle, Karmann Ghia, VW Type 3 & Kübel Type 181, 924/944 with semi-trailing arm rear axle.

Priced as each.

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-283/BQ – Wheel Bearing, Rear Inner for IRS

Description:

Best quality wheel bearing replaces the inner wheel bearing on VW Beetle, Karmann Ghia, VW Type 3 & Kübel Type 181, 924/944 with semi-trailing arm rear axle.

Priced as each.

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3