NTC9607 – Drag Link Tube Assembly Late Discovery 1 And Range Rover
Description: Drag Link Tube Assembly Late Discovery 1 and Range Rover
Note this part is the Drag Link ( The Front Tube ). This tube has anominal length of 863 mm and is not to be confused with the longer TrackRod Tube (rear tube with Bracket for damper) nominal length 1038mm exADJUSTER bar.
This listing is for the Front tube assembly, the front tube is known as the DragLink Tube. (The Rear tube is known as the Track Rod Tube).
This is full assembly includes Tube, Clamps, Fixings, and Ball Joints.
Fits :-
- Discovery I From 1992 VIN JA018175
- Range Rover Classic Late From 92 VIN JA615504
Note there were two types of assembly used on these applications. Late vehicles from around 1992 used this type which has two ball joints, one each end of the tube. Early type has a ball joint on one end and a Swans Neck link on the other end. If your vehicle is around change over point check visually which type you have.
See related products below for early type.
NTC9607
Compatible Vehicles: - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Discovery 1 1989-1998,Range Rover Classic 1971-1994
NV116041L – Nut
Description: NUT
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NV22532 – Retaining Ring Nv225 Range Rover L322
Description: RETAINING RING NV225 RR L322
Compatible Vehicles: - Range Rover 2002-2009 (2002,2003,2004,2005,2006,2007,2008,2009) - Range Rover 2010-2012 (2010,2011,2012)
Additional Vehicle Info: Range Rover 2002-2009,Range Rover 2010-2012
NV22536 – Retaining Ring Nv225 Range Rover L322
Description: RETAINING RING NV225 RR L322
Compatible Vehicles: - Range Rover 2002-2009 (2002,2003,2004,2005,2006,2007,2008,2009) - Range Rover 2010-2012 (2010,2011,2012)
Additional Vehicle Info: Range Rover 2002-2009,Range Rover 2010-2012
NV22557 – Retaining Ring Nv225 Range Rover L322
Description: RETAINING RING NV225 RR L322
Compatible Vehicles: - Range Rover 2002-2009 (2002,2003,2004,2005,2006,2007,2008,2009) - Range Rover 2010-2012 (2010,2011,2012)
Additional Vehicle Info: Range Rover 2002-2009,Range Rover 2010-2012
NY108041L – Nut Nyloc M8 Zp
Description: NUT NYLOC M8 ZP
Fits:
- Defender 1987-2006
- Discovery 1 1989-1998
- Discovery 2 1998-2004
- FREELANDER 1996-2006
- Range Rover Classic 1992-1994
- Range Rover Classic 1992-1994
- Defender 1987-2006
- Discovery 1 1989-1998
- Discovery 2 1998-2004
- Range Rover Classic 1992-1994
- Jaguar
- Defender 1987-2006
- Discovery 1 1989-1998
- Discovery 2 1998-2004
- Range Rover Classic 1992-1994
- Range Rover 1994-2001
- Defender 1987-2006
- Discovery 1 1989-1998
- Range Rover Classic 1992-1994
- Defender 1987-2006
- Discovery 1 1989-1998
- Range Rover Classic 1992-1994
- Range Rover 1994-2001
- Defender 1987-2006
- Discovery 1 1989-1998
- FREELANDER 1996-2006
- Range Rover Classic 1992-1994
- Defender 1987-2007 on
- Discovery 1 1989-1998
- Range Rover Classic 1986-1994
- Defender 1987-2006
- Discovery 1 1989-1998
- Range Rover Classic 1992-1994
- Defender 1987-2006
- Discovery 1 1989-1998
- Discovery 2 1998-2004
- Range Rover Classic 1986-1994
- Range Rover 1994-2001
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Discovery 2 (1998,1999,2000,2001,2002,2003,2004) - Range Rover 1994-2001 (1994,1995,1996,1997,1998,1999,2000,2001) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Discovery 2 1998-2004,Range Rover 1994-2001,Range Rover Classic 1971-1994
OD7168B – Bush For Mainshaft Rtc7168
Description: BUSH FOR MAINSHAFT RTC7168
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
OD7168C – Circlip Fairey Overdrive For Land Rover Series Mainshaft
Description: CIRCLIP FAIREY OVERDRIVE FOR LAND ROVER SERIES MAINSHAFT RTC7168
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
OD766 – Pivot Bolt
Description: PIVOT BOLT
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
ODSYNC – Synchro Overhaul Kit Fairey
Description: SYNCHRO OVERHAUL KIT FAIREY
Springs Blocks and Balls to overhaul Fairey Overdive Syncro Hub
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
OPK001F – Oil Pump Repair Kit V8 76-94
Description: OIL PUMP REPAIR KIT V8 76-94
Oil Pump Overhaul Kit (27mm Gears) For Rover V8 Engine
Fits Vehicles With An Approximate Date Range 1976 - 1994- DEFENDER
- DISCOVERY
- RANGE ROVER
- Defender 1987-2006
- Discovery 1 1989-1998
- Range Rover Classic 1992-1994
- Range Rover 1994-2001
- Defender 1987-2006
- Defender
- Discovery I (Apart From Rotoflex
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Discovery 2 (1998,1999,2000,2001,2002,2003,2004) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Discovery 2 1998-2004,Range Rover Classic 1971-1994
PBK002 – Prop/Rear Flange Bolt/Nut Kit
Description: PROPSHAFT TO REAR FLANGE BOLT/NUT KIT
Bolt & Nut Kit For Securing Propshaft To Transfer Box Rear Flange
Note These Are The Longer (1.5) Correct Bolts For The Transfer Output Flange. We Also Stock Kits For The Shorter Bolts As Used OCompatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Discovery 2 (1998,1999,2000,2001,2002,2003,2004) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Discovery 2 1998-2004,Range Rover Classic 1971-1994
PBK003 – Prop/Front Flange Bolt/Nut Kit
Description: PROP TO FRONT TRANSFER FLANGE BOLT/NUT KIT
Bolt & Nut Kit For Securing Propshaft To Transfer Box Front Flange
Note These Are The Longer (1.25) Correct Bolts For The Transfer Output Flange. We Also Stock Kits For The Shorter Bolts AsCompatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Discovery 2 (1998,1999,2000,2001,2002,2003,2004) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Discovery 2 1998-2004,Range Rover Classic 1971-1994
PC000401 – Bilstein C Spanner
Description:
Bilstein C-spanner set for adjustable Bilstein shock absorbers.
Bilstein spanner wrenches allow the leverage to adjust the height or make quick work of changing the spring seat and lock ring for Bilstein coilover kits requiring the M-F round pin-style adjuster.Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
PC000P10A – Porsche P10A Tool, Valve Spring Gauge
Description:
- Adjusts valve spring preload/tension
- Compatible with Porsche 356 and 912 models
- Ensures precise preload measurement
The Porsche P10A Tool is an essential instrument for adjusting the valve spring preload and tension on Porsche 356 and 912 models. This tool is designed to measure and adjust the valve preload on the cylinder heads, ensuring optimal engine performance. The preload must be set to 39.0 +/- 0.5mm, which is adjusted using shims for precise calibration.For accurate adjustment, the middle line on the tool must align between the two tolerance lines. This ensures that the valve spring preload is within the specified range, maintaining the engine's efficiency and longevity. The Porsche P10A Tool is a must-have for any Porsche enthusiast or mechanic looking to maintain their classic vehicle's performance.Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 356,912
PC0081186PB – Big Bore Piston & Aluminium Cylinder Kit, 86mm
Description:
- No machining needed for factory fit
- Biral aluminium cylinders with graphite-coated pistons
- Fits Porsche 356 C/SC & 912 with 3-piece case
Upgrade your classic Porsche with this high-performance Big Bore 86mm piston and cylinder kit, designed specifically for Porsche 356 C/SC (1964–65) and Porsche 912 (1965 and up) models with a 3-piece case. The kit features biral cylinders paired with graphite-coated hypereutectic pistons, engineered for durability and optimal performance. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. With 30° angle valve pockets and 22mm pins, this setup enhances combustion efficiency and power delivery.Installation is hassle-free—no machining required when used with factory Porsche cases and heads. Whether you're restoring or upgrading, this kit offers a reliable and performance-focused solution for your air-cooled engine.Engine size: 1600ccEngine size After Big Bore: 1700ccStroke: 74mmCylinders: Aluminium BiralPistons: HypereutecticDome CC: 17Compression: 9.2:1Piston Angle: 30°Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.Compatible Vehicles: - 356 (1964,1965) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 356,912
PC0081186PS – Big Bore Piston & Cast Cylinder Kit, 86mm
Description:
- No machining needed for factory fit
- Cast iron cylinders with graphite-coated pistons
- Fits Porsche 356 C/SC & 912 with 3-piece case
Upgrade your classic Porsche with this high-performance Big Bore 86mm piston and cylinder kit, designed specifically for Porsche 356 C/SC (1964–65) and Porsche 912 (1965 and up) models with a 3-piece case. The kit features cast iron cylinders paired with graphite-coated hypereutectic pistons, engineered for durability and optimal performance. With 30° angle valve pockets and 22mm pins, this setup enhances combustion efficiency and power delivery.Installation is hassle-free—no machining required when used with factory Porsche cases and heads. Whether you're restoring or upgrading, this kit offers a reliable and performance-focused solution for your air-cooled engine.Engine size: 1600ccEngine size After Big Bore: 1700ccStroke: 74mmCylinders: Cast Iron.Pistons: HypereutecticDome CC: 17Compression: 9.2:1Piston Angle: 30°Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.Compatible Vehicles: - 356 (1964,1965) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 356,912
PC008180FW – Forged Lightweight Flywheel, 180mm
Description:
- Lightweight 14LB forged chromoly construction
- SPG pattern with 8 dowel pin drillings
- Heat-treated 6V ring gear for lasting performance
This brand-new forged chromoly flywheel is precision-engineered for early Porsche 356 models. Weighing just 14 pounds, it offers a lightweight solution without compromising strength. Manufactured to exact specifications, it features 8 dowel pin drillings in the SPG pattern for secure crankshaft mounting.Designed for durability and performance, the flywheel includes a heat-treated 6 Volt ring gear and a 24mm clutch depth. Ideal for restorations or performance upgrades, it delivers OEM compatibility with modern reliability.Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: 356
PC008200FW – Forged Lightweight Flywheel, 200mm
Description:
- Lightweight 13LB forged chromoly construction
- SPG pattern with 8 dowel pin drillings
- Heat-treated 6V ring gear for lasting performance
This brand-new forged chromoly flywheel is precision-engineered for Porsche 356 models. Weighing just 13 pounds, it offers a lightweight solution without compromising strength. Manufactured to exact specifications, it features 8 dowel pin drillings in the SPG pattern for secure crankshaft mounting.Designed for durability and performance, the flywheel includes a heat-treated 6 Volt ring gear and a 25mm clutch depth. Works with OEM Porsche 200mm clutch. Ideal for restorations or performance upgrades, it delivers OEM compatibility with modern reliability.Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: 356
PC008912FW – Forged Flywheel, 215mm
Description:
- Forged chromoly for high strength and reliability
- SPG pattern with 8 dowel pin drillings
- Heat-treated 12V ring gear for long-lasting wear
This brand-new forged chromoly flywheel is designed specifically for late Porsche 912 models. Manufactured to exact specifications, it ensures a precise fit and reliable performance. Each flywheel is drilled for 8 dowel pins using the SPG pattern, providing secure crankshaft engagement for high-revving applications.Built for durability and strength, it features a heat-treated 12 Volt ring gear to withstand demanding conditions. Whether you're restoring a classic or upgrading for longevity, this flywheel delivers OEM compatibility with modern engineering quality.Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 912
PC105401L – Clevis Pin
Description: CLEVIS PIN
Fits:
- Defender 1987-2006
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
PC1060001 – Water Pump Adapter Kit
Description:
Water pump adapter kit for early 944, required when upgrading to the later water pump 944-106-021-22.
Includes:
1 x Belt Guard Rail 94410521301
2 x Locking Nut 99908409202
1 x Idler Roller 94410524104
To fit:
924S 2.5 upto 07/1986
944 2.5 06/1981-07/1986Compatible Vehicles: - 924 (1986) - 944 (1982,1983,1984,1985,1986)
Additional Vehicle Info: 924,944
PC1060002 – Thermostat Low Temperature 71°C
Description:
Low temperature thermostat with housing. This thermostat opens at the lower temperature of 71°C (160°F), the standard thermostat opens at 83°C (181°F).
The lower temperature thermostat allows the water jacket around the engine block to operate at reduced temperatures which keeps the cylinders cooler and can reduce the risk of the engine cylinder bores becoming scored.Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008) - 987 Boxster (2005,2006,2007,2008) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997
PC1070001 – Oil Return Tube Kit, Finned Aluminium
Description:
Finned aluminium single piece tube design oil return tube kit.
Includes: 4x Finned oil return tubes, 8x Viton oil return tube O-rings
- Heavy-duty one-piece design
- Finned-aluminium construction has 200% greater surface area than stock tube to cool oil as it returns to engine
- Includes premium Viton seals
- Guaranteed fitment
- Oil tubes and o-rings are manufactured to OE dimensions for easy installation and reliable connections
- Resists cracking that can lead to oil leakage and inadequate lubrication
- High-strength alloy and elastomer materials withstand engine heat and continuous contact with motor oil
- 24 Month Unlimited Mileage WarrantyCompatible Vehicles: - 911 (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 911,914,930,964,993
PC1080002 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
911 2.7 Fuel injection 1972-1979
911 3.0 Fuel injection 1974-1983
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 911 (1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)
Additional Vehicle Info: 911
PC1080004 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
911 (930) 3.0 Fuel injection 1975-1977
911 (930) 3.3 Fuel injection 1978-1989
911 (964) 3.3 Fuel injection 1990-1994 Turbo models
911 (964) 3.6 Fuel injection 1993 Turbo models
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 930,964
PC1080005 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
911 (964) 3.6 Fuel injection 1989-1994 excluding Turbo model
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC1080006 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
911 (993) 3.6 Fuel injection 1994-1998
911 (993) 3.8 Fuel injection 1995-1998
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1080007 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
911 (996) 3.4 Fuel injection 1998-2005
911 (996) 3.6 Fuel injection 2001-2005 excluding Turbo model
911 (997) 3.6 Fuel injection 2005-2008 Carrera
911 (997) 3.8 Fuel injection 2005-2008 Carrera S
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 996,997
PC1080008 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
911 (996) 3.6 Fuel injection 2001-2005 GT2
911 (996) 3.6 Fuel injection 1999-2005 GT3
911 (996) 3.6 Fuel injection 2000-2005 Turbo
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 996 (1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1080009 – K&N High Flow Round Air Filter
Description:
K&N replacement air filter. Replaces the standard filter.
To fit:
912 1.6 Carb 1965-1969
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 912
PC1080011 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
924 2.0 Turbo/Carrera GT 1979-1984
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 924 (1979,1980,1981,1982,1983,1984)
Additional Vehicle Info: 924
PC1080012 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
924 S 2.5 1986-1988 150 & 160 BHP models
944 2.5-2.7 1982-1989
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
Panel Filter Material - Cotton Gauze Filter Re-Oiling Amount - 1.41 oz (42 ml)
Additional Vehicle Info: 924,944
PC1080014 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
968 3.0 Fuel injection 1992-1995
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 968 (1992,1993,1994,1995)
Notes:
Panel Filter Material - Cotton Gauze Filter Re-Oiling Amount - 2.25 oz (66 ml)
Additional Vehicle Info: 968
PC1080015 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
944S 2.5 16v 1987-1988
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 944 (1986,1987,1988)
Notes:
Panel Filter Material - Cotton Gauze
Filter Re-Oiling Amount - 2.17 oz (64 ml)Additional Vehicle Info: 944
PC1080016 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
944 Turbo 2.5 1985-1991
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991)
Additional Vehicle Info: 944
PC1080017 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
944 S2 3.0 Fuel injection 1989-1991
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 944 (1989,1990,1991)
Notes:
Panel Filter Material - Cotton Gauze Filter Re-Oiling Amount - 1.77 oz (52 ml
Additional Vehicle Info: 944
PC1080018 – K&N High Flow Panel Air Filter
Description:
K&N replacement panel air filter. Replaces the standard filter.
To fit:
Boxster (986) 2.5 Fuel injection 1997-1999
Boxster (986) 2.7 Fuel injection 1999-2004 220 & 228 BHP models
Boxster (986) 3.2 Fuel injection 1999-2004 Excluding 280 BHP models
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)
Notes:
Panel Filter Material - Cotton Gauze Filter Re-Oiling Amount - 0.94 oz (28 ml)
Additional Vehicle Info: 986 Boxster
PC1080019 – K&N High Flow Oval Air Filter
Description:
K&N replacement air filter. Replaces the standard filter.
To fit:
Boxster (987) 2005-2012 all models
Cayman (987C) 2006-2012 all models
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012)
Additional Vehicle Info: 987 Boxster,987 Cayman
PC1080020 – K&N 57i Induction Kit for 2.0 Turbo
Description:
K&N 57i Gen 1 induction kit.
To fit:
924 Turbo 2.0 1979-1984
K&N Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburettor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminium, silicone or reinforced nylon to ensure long life.Compatible Vehicles: - 924 (1979,1980,1981,1982,1983,1984)
Additional Vehicle Info: 924
PC1080021 – K&N 57i Gen 2 Induction Kit
Description:
K&N 57i Gen 2 induction kit.
To fit:
911 (996) 3.4 Carrera Fuel injection 1998-2001
911 (996) 3.6 Carrera Fuel injection 2002-2005
The K&N 57-7000 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Porsche 911 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Porsche 911’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-7000 air intake comes with a light-weight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed from the fresh air supply duct, past the air filter and through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The oversized cone-shaped air filter is wrapped with a water repellent Drycharger filter wrap that can be used for up to 100,000 miles before servicing is needed depending on driving conditions.Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1080027 – Dual Manifold Kit, 40 IDF/HPMX
Description:
- Fits 40/44 HPMX or IDF carbs
- Includes gaskets, studs & hardware
- Clean fit for Porsche 356/912 engines
Upgrade your classic Porsche 356 or 912 with these precision-engineered EMPI trick manifolds, designed to seamlessly adapt 40/44 HPMX or 40/44 IDF carburettors to your stock engine. Whether you're restoring or enhancing performance, these manifolds offer a clean, factory-like fit that maintains the original engine bay aesthetics.Each kit includes all necessary gaskets, studs, and hardware, making installation straightforward and hassle-free. With a reputation for quality and compatibility, EMPI manifolds are the perfect solution for enthusiasts seeking both performance and authenticity.Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 356,912
PC1080030 – Velocity Stack Set for Solex 40 PII-4
Description:
- Used to increase air speed into the carburettor
- One set required per carburettor
To fit:356 A, B, C 1.5-1.6 01/1955-12/1965912 1.6 01/1965-02/1970Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 356,912
PC1100001 – Air Box Pop-Off Valve
Description:
Air box pop-off valve. Prevents air box damage from backfiring.
Fitted inside the standard air box, the pop-off valve, which is also called a backfire protection valve, is a good modification for 911's with the Continuous Injection System (CIS). In the event of a backfire, which is not uncommon with these cars, the pop-off valve will release the pressure which can crack and damage the airbox.
Drilling of the air box is required, instructions included.
- Guaranteed Fitment
- 24 Month Unlimited Mileage Warranty
- High Quality Materials
- Replaces leaking OE air box pop-off valve that can reduce vacuum and degrade engine performance
- Manufactured to original valve specifications for easy installation and reliable performance
- Durable high-quality materials withstand high temperatures and rapid vacuum fluctuations
To fit:
911 08/1973-07-1983 (vehicles fitted with CIS Continuous Injection System)Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911
PC1110002 – Milltek Sport Free-Flow Manifolds SSXPO026
Description:
- Precision-engineered equal-length design for optimal flow
- Enhanced power gains up to 14 HP and 16 Ft.TQ
- Mandrel-bent pipework for improved boost response
Enhance your vehicle’s power and response with the Milltek Sport SSXPO026 free-flow manifold kit. Designed for cars equipped with the K16 turbo, these precision-engineered manifolds feature a short, equal-length design to optimise boost response and maximise horsepower and torque. The 1.67-inch (42.5mm) mandrel-bent pipework ensures seamless exhaust flow, while the pyramid merge collector significantly improves performance compared to stock headers.Crafted from high-quality type-304 aircraft-grade stainless steel, these manifolds offer superior durability and resistance to discoloration. Milltek Sport’s 33+ years of expertise ensure a perfect balance of power gains and reliability, with an increase in bore size to prevent mid-range torque loss. Designed, developed, and manufactured in-house in the UK, these manifolds represent the pinnacle of performance exhaust technology.To fit:911 (996) Turbo including X50 and GT2 2000-2005 fits K16 turbo onlyCompatible Vehicles: - 996 (2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110019 – SSI Exhaust Conversion Kit
Description:
- Boosts performance in low/mid RPM ranges
- Durable AISI 304/321 stainless steel construction
- Complete kit with all necessary parts included
Upgrade your impact bumper car with the SSI Complete Free-Flow Exhaust Conversion Kit, designed to transform your vehicle's exhaust system into the efficient “2 into 1” style. This kit replaces the restrictive cross-over pipe and pre-silencer setup with a state-of-the-art, stainless steel system that enhances performance, particularly in the low and middle RPM ranges. Made entirely from AISI 304/321 stainless steel, it’s built to withstand even the harshest conditions, including exposure to road salt, ensuring long-lasting durability and reliability.This comprehensive kit includes everything you need for a seamless conversion, from the advanced heat exchangers to the 60mm tailpipe. You'll also receive a rear silencer, silencer straps, oil pipes, and all necessary gaskets, nuts, and bolts. Whether you're restoring a classic model or enhancing a daily driver, this exhaust conversion kit will significantly improve both performance and longevity.To fit:911 2.7-3.0 08/1973-07/1983Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)
Additional Vehicle Info: 911
PC1110020 – Sport Exhaust Rear Silencer
Description:
Dansk Motorsport single outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from painted aluminized mild steel with a single 70mm polished tip.
With TÜV/EEC Approval.Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: 911
PC1110021 – Sport Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport single outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel with a single 70mm polished tip.
With TÜV/EEC Approval.
To fit:
911 09/1964-07/1973 Non impact bumper vehiclesCompatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: 911
PC1110022 – Twin Outlet Sport Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport twin outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel with twin 70mm polished tips.
With TÜV/EEC Approval.
To fit:
911 09/1964-07/1973 Non impact bumper vehiclesCompatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: 911
PC1110023 – Sport Exhaust Rear Silencer
Description:
Dansk Motorsport single outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from painted aluminized steel with a single 70mm polished stainless steel tail pipe.
With TÜV/EEC Approval.
To fit:
911 S/Carrera 2.7 08/1973-07/1974
911 Carrera 2.7 08/1974-07/1976 911/83 engineCompatible Vehicles: - 911 (1974,1975,1976)
Additional Vehicle Info: 911
PC1110024 – Sport Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport single outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel with a single 70mm polished tail pipe.
With TÜV/EEC Approval.
To fit:
911 S/Carrera 2.7 08/1973-07/1974
911 Carrera 2.7 08/1974-07/1976 911/83 engineCompatible Vehicles: - 911 (1974,1975,1976)
Additional Vehicle Info: 911
PC1110025 – Twin Outlet Sport Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport twin outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel with twin 70mm polished tail pipes.
With TÜV/EEC Approval.
To fit:
911 S/Carrera 2.7 08/1973-07/1974
911 Carrera 2.7 08/1974-07/1976 911/83 engineCompatible Vehicles: - 911 (1974,1975,1976)
Additional Vehicle Info: 911
PC1110026 – Sport Exhaust Rear Silencer
Description:
Dansk Motorsport single outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from painted aluminized mild steel with a single 70mm polished tip.
With TÜV/EEC Approval for 2.7 and 3.0 engine.
To fit:
911 08/1974-07/1989Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911
PC1110027 – Sports Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport single outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel with a single 84mm polished tip.
With TÜV/EEC Approval.
To fit:
911 08/1974-07/1989Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911
PC1110028 – Twin Outlet Sports Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport twin outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel with twin 84mm polished tips.
With TÜV/EEC Approval.
To fit:
911 08/1974-07/1989Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911
PC1110030 – Exhaust Front Silencer Bypass Pipe
Description:
Dansk Motorsport exhaust intermediate / front silencer bypass pipe without baffles, with lambda hole.
Made from painted aluminized mild steel.
To fit:
911 08/1974-08/1989Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911
PC1110031 – Exhaust Front Silencer Bypass Pipe, Stainless Steel
Description:
Dansk Motorsport exhaust intermediate / front silencer bupass pipe without baffles, with lambda hole.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 08/1974-08/1989Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911
PC1110034 – Sports Exhaust Pre Silencer, Stainless Steel
Description:
Dansk Motorsport sports exhaust pre silencer. Gives an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel.
With TÜV/EEC Approval.
To fit:
911 (964) C2/C4/RS 12/1988-07/1994
Replacement for 96411104504Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC1110035 – Exhaust Pre Silencer Bypass Pipe, Stainless Steel
Description:
Dansk Motorsport exhaust pre silencer bypass pipe, replaces the bulky and restrictive pre silencer box with a straight through design. This will give an aggressive exhaust note more suited to a track oriented vehicle. The 964RS used a similar design pipe.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (964) C2/C4/RS 12/1988-07/1994Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC1110036 – Sports Stainless Steel Exhaust Tail Pipe
Description:
Dansk Motorsport sports exhaust tail pipe with angle cut inward rolled end as original. Will fit standard or sports rear silencer.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (964) C2/C4/RS 12/1988-07/1994Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC1110037 – Sports Stainless Steel Exhaust Tail Pipe
Description:
Dansk Motorsport sports exhaust tail pipe with angle cut end (not rolled). Will fit standard or sports rear silencer.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (964) C2/C4/RS 12/1988-07/1994Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Notes:Outer diameter 102mm
Additional Vehicle Info: 964
PC1110039 – Exhaust Rear Silencer Bypass G-Pipe, Stainless Steel
Description:
Dansk Motorsport exhaust rear silencer bypass G-pipe, replaces the rear silencer.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (964) C2/C4/RS 12/1988-07/1994
911 (964) Turbo 3.3/3.6 08/1990-07/1994Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC1110040 – Sports Exhaust Rear Silencer, Stainless Steel
Description:
Dansk Motorsport sports exhaust rear silencer in stainless steel. Gives an increase in BHP and a sportier sound.
Made from high quality 304/4301 stainless steel.
With TÜV/EEC approval for Carrera 2/4 with 3.6 L engine.
To fit:
911 (964) C2/C4/RS 12/1988-06/1994
911 (964) Turbo 3.3/3.6 08/1990-07/1994Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC1110041 – Sports Exhaust Rear Silencer Set, OE Style, Stainless Steel
Description:
Sports exhaust rear silencer set. OE style.
Made from high quality polished 304/4301 stainless steel.
With TÜV/EEC Approval.
To fit:
911 (993) 10/1993-08/1998 Not Turbo modelsCompatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110042 – Sports Exhaust Rear Silencer Set, Stainless Steel
Description:
Dansk Motorsport sports exhaust rear silencer set. Gives an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel.
With TÜV/EEC Approval.
To fit:
911 (993) 10/1993-08/1998 Not Turbo modelsCompatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110043 – Sports Exhaust Rear Silencer Set, Sound Version, Stainless Steel
Description:
Dansk Motorsport "Sound Version" sports exhaust rear silencer set, giving an increase in BHP and a very loud and deep sound.
Made from high quality polished 304/4301 stainless steel.
WITHOUT TÜV/EEC Approval.
To fit:
911 (993) 10/1993-08/1998 Not Turbo modelsCompatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110044 – Sports Exhaust Rear Silencer Set, Stainless Steel
Description:
Dansk Motorsport sports exhaust rear silencer set. Gives an increase in BHP and a deeper sound.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (993) Turbo 03/1995-07/1998Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110045 – Exhaust Tail Pipe Kit, Stainless Steel
Description:
Exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (993) 10/1993-08/1998 Not C4S or Turbo modelsCompatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110046 – Exhaust Tail Pipe Kit, Angle Cut, Stainless Steel
Description:
Dansk Motorsport exhaust tail pipe kit to fit original or sports exhaust. Angle cut to follow the bumper shape.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (993) 10/1993-08/1998 Not C4S or Turbo modelsCompatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110047 – Exhaust Tail Pipe Kit, Stainless Steel
Description:
Exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (993) 06/1995-08/1998 C4S modelCompatible Vehicles: - 993 (1995,1996,1997,1998)
Additional Vehicle Info: 993
PC1110050 – Sports Exhaust Rear Silencer Set, Stainless Steel
Description:
- Sporty sound without being too loud
- Polished stainless steel ensures durability and style
- Boosts power and improves throttle response
- With TÜV/EEC approval for 3.4 L engine
Elevate your driving experience with the Dansk Motorsport Sports Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. It delivers a sportier sound while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a subtly sportier exhaust note without getting too noisy. If you want an OEM look with pressed boxes and with the same sound, consider the Dansk 996-111-131-99/SS. If you prefer a louder aggressive sound, consider the Dansk PC1110051 alternative. Whichever you choose, quality and performance are guaranteed.To fit:911 (996) 3.4-3.6 09/1997-07/2005 not GT3/GT2/TurboCompatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110051 – Sports Exhaust Rear Silencer Set, Sound Version, Stainless Steel
Description:
- Aggressive sporty sound
- Polished stainless steel ensures durability and style
- Boosts power and improves throttle response
Elevate your driving experience with the Dansk Motorsport "Super Sound" Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. Its aggressive, sporty sound delivers a thrilling auditory experience while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a louder, more exhilarating exhaust note. If you prefer a quieter option with a touch of sportiness closer to OEM standards, consider the Dansk PC1110050 or 996-111-131-99/SS alternatives. Whichever you choose, quality and performance are guaranteed.To fit:911 (996) 3.4-3.6 09/1997-07/2005 not GT3/GT2/TurboCompatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110052 – Sports Exhaust Rear Silencer Set, GT3, Stainless Steel
Description:
- Sporty sound without being too loud
- Polished stainless steel ensures durability and style
- Boosts power and improves throttle response
Elevate your driving experience with the Dansk Motorsport Sports Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. It delivers a sportier sound while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a subtly sportier exhaust note without getting too noisy.To fit:911 (996) GT3 3.6 03/1999-07/2005Compatible Vehicles: - 996 (1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110054 – Exhaust Tail Pipe Kit, Stainless Steel
Description:
Exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (996) 3.4 09/1997-07/2001Compatible Vehicles: - 996 (1998,1999,2000,2001)
Additional Vehicle Info: 996
PC1110055 – Exhaust Tail Pipe Kit, Stainless Steel
Description:
Exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (996) 3.4-3.6 08/2001-07/2005Compatible Vehicles: - 996 (2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110056 – Exhaust Tail Pipe Kit, Turbo Look, Stainless Steel
Description:
Dansk Motorsport ''Turbo Look'' exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (996) 3.4 09/1997-07/2001Compatible Vehicles: - 996 (1998,1999,2000,2001)
Additional Vehicle Info: 996
PC1110057 – Exhaust Tail Pipe Kit, Turbo Look, Stainless Steel
Description:
Dansk Motorsport ''Turbo Look'' exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (996) 3.4-3.6 08/2001-07/2005Compatible Vehicles: - 996 (2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110058 – Exhaust Tail Pipe Kit, Stainless Steel
Description:
Dansk Motorsport exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (996) Turbo 3.6 06/2000-07/2005Compatible Vehicles: - 996 (2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC1110059 – Sports Exhaust Silencer Set, OE Style, Stainless Steel
Description:
- Sporty sound without being too loud
- OE look glass bead blasted stainless steel
- Boosts power and improves throttle response
Elevate your driving experience with the Dansk Motorsport Sports Rear Silencer Set. Crafted from high-quality stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. It delivers a sportier sound while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a subtly sportier exhaust note without getting too noisy. If you the same sound on a budget, consider the Dansk PC1110050 with oval boxes. If you prefer a louder aggressive sound, consider the Dansk PC1110061 alternative. Whichever you choose, quality and performance are guaranteed.To fit:911 (997) 3.6 C2, C4 07/2004-07/2008 *please also use tail pipe PC1110064911 (997) 3.8 C2S, C4S 07/2004-07/2008Compatible Vehicles: - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 997
PC1110061 – Sports Exhaust Silencer Set, Stainless Steel
Description:
- Sporty sound without being too loud
- Polished stainless steel ensures durability and style
- Boosts power and improves throttle response
Elevate your driving experience with the Dansk Motorsport Sports Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. It delivers a sportier sound while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a subtly sportier exhaust note without getting too noisy. If you want an OEM look with pressed boxes and with the same sound, consider the Dansk PC1110059. If you prefer a louder aggressive sound, consider the Dansk PC1110062 alternative. Whichever you choose, quality and performance are guaranteed.To fit:911 (997) 3.6 C2, C4 08/2004-07/2008 use original tailpipes or PC1110064911 (997) 3.8 C2S, C4S 08/2004-07/2008 to use original S tailpipes you will need adapter PC1110116, or use tailpipes PC1110064Compatible Vehicles: - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 997
PC1110062 – Sports Exhaust Silencer Set, Sound Version, Stainless Steel
Description:
- Aggressive sporty sound
- Polished stainless steel ensures durability and style
- Boosts power and improves throttle response
Elevate your driving experience with the Dansk Motorsport "Super Sound" Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. Its aggressive, sporty sound delivers a thrilling auditory experience while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a louder, more exhilarating exhaust note. If you prefer a quieter option with a touch of sportiness closer to OEM standards, consider the Dansk PC1110061 or PC1110059 alternatives. Whichever you choose, quality and performance are guaranteed.To fit:911 (997) 3.6 C2, C4 08/2004-07/2008 use original tailpipes or PC1110064911 (997) 3.8 C2S, C4S 08/2004-07/2008 to use original S tailpipes you will need adapter PC1110116, or use tailpipes PC1110064Compatible Vehicles: - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 997
PC1110063 – Sports Exhaust Silencer Set, OE Style, Stainless Steel
Description:
Dansk Motorsport sports exhaust rear silencer set OE style.
Made from high quality 304/4301 stainless steel, bead blasted for a matt finish.
To fit:
911 (997) 3.6 C2, C4 08/2008-2012
911 (997) 3.8 C2S, C4S 08/2008-2012Compatible Vehicles: - 997 (2009,2010,2011,2012)
Additional Vehicle Info: 997
PC1110064 – Exhaust Tail Pipe Kit, Carrera S Look, Stainless Steel
Description:
Dansk Motorsport ''Carrera S Look'' exhaust tail pipe kit to fit original or sports exhaust.
Made from high quality polished 304/4301 stainless steel.
To fit:
911 (997) 3.6-3.8 07/2004-07/2008 not vehicles with with factory sports exhaust PSECompatible Vehicles: - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 997
PC1110067 – Sports Exhaust Silencer Set, Stainless Steel
Description:
- Sporty sound without being too loud
- Polished stainless steel ensures durability and style
- Boosts power and improves throttle response
Elevate your driving experience with the Dansk Motorsport Sports Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. It delivers a sportier sound while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.Sold as a pair, this exhaust set is ideal for enthusiasts who crave a subtly sportier exhaust note without getting too noisy. If you want an OEM look with pressed boxes and with the same sound, consider the Dansk PC1110063. If you prefer a louder aggressive sound, consider the Dansk PC1110141 alternative. Whichever you choose, quality and performance are guaranteed.To fit:911 (997) 3.6-3.8 0//2008-12/2012 not GT2/TurboCompatible Vehicles: - 997 (2009,2010,2011,2012)
Additional Vehicle Info: 997
PC1110068 – Exhaust Rear Silencer, OE Style, Stainless Steel
Description:
Exhaust rear silencer, OE style with standard sound and fixed twin polished stainless steel ''S'' tail pipes.
Made from high quality 304/4301 stainless steel.
With TÜV/EEC Approval for 2.5L engine only.
To fit:
Boxster (986) 2.5 09/1996-07/1999 Installation kit 000-044-200-11 required (available from Porsche)
Boxster (986) 2.7-3.2 06/1999-12/2004Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)
Additional Vehicle Info: 986 Boxster
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Range Rover Classic 1971-1994
PA108101L – Spring Pin
Description: SPRING PIN
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Range Rover 1994-2001 (1994,1995,1996,1997,1998,1999,2000,2001) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Range Rover 1994-2001,Range Rover Classic 1971-1994
PA110260L – Roll Pin
Description: ROLL PIN
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Series 1,2,3 (1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)
Additional Vehicle Info: Defender 1983-2016,Series 1,2,3
PA120801L – Spring Pin
Description: SPRING PIN
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
PAF-003-923 – Hexagon Nut, M8 for Top Mount
Description:
Hexagon nut, M8, used to secure the front top mounts. 3 required per top mount.
To fit:
Boxster (986) 1997-2004
Boxster (987) 2005-2008
Cayman (987C) 2006-2008
911 (996) 1998-2005
911 (997) 2005-2008Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008) - 987 Boxster (2005,2006,2007,2008) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008)
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997
PAF-005-651 – nan
PBK001 – Prop Bolt Kit 4 Bolts & Nuts
Description: PROP BOLT KIT PROP TO DIFF 4 BOLTS & NUTSBolt & Nut Kit For Securing Propshaft To Diff Flange. 4 Bolts Complete With Correct Thin Style Nylock Nut.
FITS:-
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NY110047L – Nut M10
Description: NUT M10 NY110047L
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998
NY114041L – Nut
Description: NUT
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NY116041L – Nut Nyloc
Description: NUT NYLOC M16 Nyloc Plated
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998
NY120041L – Nut Nyloc M20 Zp
Description: NUT NYLOC M20 ZP
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NY604041L – Nyloc Nut 1/4 Unf
Description: NYLOC NUT 1/4 UNF
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NY606041L – Nut Nyloc 3/8 Unf
Description: NUT NYLOC 3/8 UNF
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Range Rover 1994-2001 (1994,1995,1996,1997,1998,1999,2000,2001) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Range Rover 1994-2001,Range Rover Classic 1971-1994
NY607041L – Nut Nyloc 7/16 Unf
Description: NUT NYLOC 7/16 UNF
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NY610041L – Nut Nyloc 5/8 Unf Zinc Power Assisted Steering
Description: NUT NYLOC 5/8 UNF ZINC POWER ASSISTED STEERING
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Discovery 1 (1989,1990,1991,1992,1993,1994,1995,1996,1997,1998) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: Defender 1983-2016,Discovery 1 1989-1998,Range Rover Classic 1971-1994
NY612041 – Nut 3/4 Unf Zp
Description: NUT 3/4 UNF ZP
Fits:
Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016)
Additional Vehicle Info: Defender 1983-2016
NZ606041L – Nut Nyloc 3/8 Unf Thin
Description: NUT NYLOC 3/8 UNF THIN
Fits:
Replies have been locked on this page!