AC498111SC – CSP Stainless Steel Anti Roll Bar Clamps
Description:
CSP stainless steel anti roll bar clamps have a unique design.
They are much easier to install than the original clamps.
The special design of the clamps makes it possible to use the full tensioning force to attach the bar, instead of causing the clamps to distort when tightening the screws.
Both the clamps and the hardware are made of stainless steel.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498117 – CSP Front Wheel Bearing kit
Description:
Wheel bearing kit for CSP Front Disc Kit. One kit per side, includes inner and outer bearings and the hub seal.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498117A – CSP Wheel Bearing Kit for Zero Offset Brakes
Description:
Replacement wheel bearing kit to fit zero offset CSP brake kit
One kit per side, includes inner and outer bearings and the hub seal.Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Notes:One kit per wheel
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498118 – CSP Front Wheel Bearing kit
Description:
Wheel bearing Kit for CSP Front Disc kit. One kit per side, includes inner and outer bearings and the hub seal.
Compatible Vehicles: - Beetle (1966,1967) - Beetle Cabrio (1966,1967) - Buggy/Baja (1966,1967) - Karmann Ghia (1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC498119 – CSP Front Wheel Bearing kit
Description:
Wheel bearing Kit for CSP Front Disc kit. One kit per side, includes inner and outer bearings and the hub seal.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498140 – Heavy Duty Front Std Anti Roll Bar Mounting Kit
Description:
Deluxe stainless steel anti roll bar mounting kit for fitting a standard front anti roll bar.
Supplied with urethane bushes and stainless steel clamps.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498145 – Heavy Duty Front Anti Roll Bar Mounting Kit 19mm Bar
Description:
Deluxe stainless steel anti roll bar mounting kit for fitting a heavy duty front anti roll bar.
Supplied with urethane bushes and stainless steel clamps.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498200 – Front Wheel Bearing kit
Description:
Wheel bearing Kit for CSP Front Disc kit. One kit per side, includes inner and outer bearings and the hub seal.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
AC498201 – Front Wheel Bearing kit
Description:
Wheel bearing Kit for CSP Front Disc kit. One kit per side, includes inner and outer bearings and the hub seal.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC498202 – Front Wheel Bearing kit
Description:
Wheel bearing Kit for CSP Front Disc kit. One kit per side, includes inner and outer bearings and the hub seal.
Compatible Vehicles: - T2 Bay (1968,1969,1970)
Additional Vehicle Info: T2 Bay
AC498220A – Front Axle Beam Adjuster Kit
Description:
- Easily fine-tune your front suspension height
- Requires front beam removal and modification
- Durable, precision-made adjusters for reliable performance
This Front Axle Beam Adjuster Kit provides a simple and effective way to adjust the front suspension height of your vehicle with precision. Once installed, you can easily modify your suspension to achieve your preferred ride height without hassle.
Please note that the front axle beam must be removed and stripped before fitting the adjusters, as cutting and welding are required. Designed for durability, these adjusters offer long-lasting performance and a smoother ride experience.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Supplied as a kit for one axle, one adjuster per beam tube.
Additional Vehicle Info: T2 Bay
AC498230 – Front Axle Beam Mounting Kit
Description:
Top quality adjuster kit for the front beam from SSP.
Once fitted this kit give you an easy way to finely adjust your front suspension height.
The front beam will need to be removed and stripped prior to cutting and welding in these adjusters.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
AC498268 – CSP Front Axle Beam Adjusters
Description:
With help of these adjusters, you can convert your factory front beam to an adjustable one.
This CSP adjuster is characterized by the accurately machined teeth and high-quality standards.
The front beam will need to be removed and stripped prior to cutting and welding in these adjusters.
The radius of the adjusters matches the factory diameter of the axle tubes.
Two adjusters per front beam are needed as sold in singles.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC4986613 – Bump Steer Bush Kit
Description:
Front anti bump steer kit.
On seriously lowered cars the track rods have to work through steep angles causing the track rod ends to run out of travel. The track rods can also come into contact with the fuel tank. These little bushes reposition the track rod ends upside down and this alleviates the problem. They will require drilling a 16mm hole into the spindle to remove the old tapered mount and use 1968 onwards track rod ends. Front-end alignment will be necessary for a complete installation.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:Requires the spindle to be machined to suit.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC501001 – Brake Drum Rear 5x205 Stud Pattern
Description:
- Early 5x205mm stud pattern with late 40mm wide shoe fitting
- Increases track by 2mm per side
- Ideal for adapting early PCD to late car setups
This CSP rear brake drum offers the perfect solution for those wanting to combine the classic early 5x205mm stud pattern with the functionality of late-model 40mm wide shoes. It allows you to maintain the early PCD on a later car, giving you the best of both worlds in terms of style and performance.
Additionally, this drum increases the track width by 2mm per side, enhancing your vehicle's stance and stability. With CSP’s renowned quality, it's a reliable and precise option for unique brake system upgrades.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)
Notes:
These can be fitted to pre 67 cars but only if you change the whole axle for the later long 21 3\/4inch type.
This drum comes with threads M14x1.5 for wheel attachment.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC501002 – Brake Drum, Rear, 5x130 Stud Pattern, Single
Description:
- Fits 5x130 PCD stud pattern
- Sold individually; replace in pairs for best results
- Ensures reliable braking performance
Restore your braking system with our rear brake drum, featuring a 5x130 PCD stud pattern. Each drum is sold individually, but we recommend replacing them in pairs to maintain balanced braking performance and vehicle safety.
Designed for durability and reliable performance, this brake drum is an essential component for restoring effective braking. Ensure your vehicle’s safety and functionality by choosing our high-quality rear brake drum.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)
Notes:These can be fitted to pre 67 cars but only if you change the whole axle for the later long 21 3\/4inch type.
Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia
AC501007O – Rear Brake Drum with Blank PCD
Description:
Rear brake drum without wheel mounting holes for a custom PCD.
Whilst we sell brake drums individually we would recommend that you change them in pairs.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)
Notes:It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC501020 – Rear Brake Drum 5x130 Stud Pattern
Description:
Custom rear brake drum for late Splitscreen with Porsche 5/130 stud pattern.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC501021 – Rear Brake Drum 5x130 Stud Pattern
Description:
Custom rear brake drum for early Baywindow with Porsche 5/130 stud pattern.
Compatible Vehicles: - T2 Bay (1968,1969,1970)
Additional Vehicle Info: T2 Bay
AC501133 – Swing Axle Flange Shim Stainless Steel
Description:
Stainless steel axle flange shim for setting up the pre-load of the axle tubes.
Originally a selection of paper gaskets were used to set the resistance, however if you find you need to use a lot of paper gaskets (111-501-133) you can use this shim instead reducing the number required.
Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:You will need to fit at least one paper gasket to each side of this shim to ensure a leak proof seal.
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Split,Type 3
AC501149 – Axle Tubes for Straight Axle Conversion Pair
Description:
Pair of extended length axle tubes with flanges for straight axle conversions on Splitscreen models. This allows early beetle short axle bearing housings and later 68-79 Beetle long axles with a Beetle swing axle gearbox to be fitted to Splitscreen models. 470 mm
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:This part is tube and flanges only you will need to purchase all other parts to complete the conversion.
Additional Vehicle Info: T2 Split
AC501150 – Axle Tubes Standard Length
Description:
Pair of standard length axle tubes for Beetle models.
VW Part number BAA-501-105
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968)
Notes:These are the Tubes Only, NO Flanges!
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC501152 – EMPI Swing Axle Bearing Housings for Short Axle
Description:
EMPI swing axle bearing housings for the short axles with lower shock mount
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC501162202 – Chromoly Race Axles Uprated for IRS Type 2 into Type 1
Description:
- 15 5/8" length, made from durable 4340 Chromoly steel
- 33 splines compatible with Type 1 and Type 2 CV joints
- Ideal for Type 2 gearbox into Type 1 conversion
- Supplied as a pair for both sides
Upgrade your drivetrain with these high-performance 4340 Chromoly Heavy Duty Race Axles, designed for extreme durability and strength. Measuring 15 5/8" in length, these axles feature 33 splines, making them compatible with both Type 1 and Type 2 CV joints, ensuring a reliable fit for your conversion project. Perfect for those swapping a Type 2 gearbox into a Type 1, these axles can handle the added torque and stress of high-performance applications, giving you peace of mind on and off the track.
Crafted from 4340 Chromoly steel, these axles are built to withstand the rigours of racing and heavy-duty use, offering superior strength and resistance to wear. They’re supplied as a pair, providing everything you need to complete the installation and enjoy the benefits of a high-performance, long-lasting axle solution for your VW. Whether you're upgrading or converting, these axles are the perfect choice for tackling tough driving conditions.
Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC5011624150 – CV Bolt for 930 CV Joint 3/8" x 24, Each
Description:
- 3/8" x 24 size for precise fit and secure fastening
- Hardened aircraft-quality bolts for maximum strength
- Designed for use with high-performance CV joint AC501879470
These CV bolts are specifically designed for use with the 930 CV joint and are crafted from hardened aircraft-quality steel to ensure maximum strength and durability. The 3/8" x 24 size guarantees a precise fit, providing secure fastening for your CV joint and preventing loosening under high-performance conditions. The bolts are ideal for use with the AC501879470 high-performance CV joint, ensuring reliable and long-lasting performance even in demanding environments.
Built to withstand extreme loads and high-stress situations, these CV bolts hold everything together, making them an essential component for anyone looking to optimize their vehicle's drivetrain. Whether you're upgrading to high-performance parts or replacing old hardware, these bolts offer the quality and strength needed for the job.
AC50117-2707 – Custom Axle Bearing Housing IRS
Description:
For fabricating IRS trailing arms
Compatible Vehicles: - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Buggy/Baja
AC501201 – Chrome Wheel Bearing Cap for Swing Axle Suspension
Description:
Wheel bearing cap for rear axle. Finished in chrome. Supplied individually
Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964) - Karmann Ghia (1958,1959,1960,1961,1962,1963,1964) - Type 3 (1961,1962)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC501202 – Chrome Wheel Bearing Cap for Swing Axle Suspension
Description:
Wheel bearing cap for rear axle. Finished in chrome. Supplied individually
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC501205 – Billet Wheel Bearing Cap for IRS
Description:
Billet aluminium bearing cap for T1 with IRS.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC5012400 – Axle Spacer Kit for IRS
Description:
- Designed for Beetle IRS and Porsche 924/944
- Durable and reliable for high performance or off-road use
- Complete rear axle 6 piece kit
Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985)
Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia
AC5012401 – Axle Spacer Kit for Swing Axle Suspension
Description: Complete axle spacer set, suitable for a Beetle with Swingaxle rear suspension. Supplied as a 4 piece set, when replacing the wheel bearings you might as well up grade at the same time.
Wide Spacer Dimensions 15.40mm Wide
Thin Spacer Dimensions 6.35mm Wide
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC5012930 – EMPI CV Flange Seals
Description:
EMPI urethane CV flange seals, supplied as a pair.
Compatible Vehicles: - Beetle Australia (1971,1972,1973,1974,1975,1976) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet
AC5012931 – EMPI CV Flange Seals
Description: EMPI urethane CV flange seals, supplied as a pair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC501300/26 – Rear Torsion Bars 21 3/4in -26mm Pair
Description:
- 21 3/4" long, 26mm diameter Chromoly torsion bars
- Suitable for use with adjustable or stock spring plates
- Stronger than factory torsion bars for enhanced performance
- Made from durable Chromoly steel for long-lasting reliability
These 21 3/4" long, 26mm diameter Chromoly torsion bars are ideal for off-road and racing applications where a stiffer spring rate is required. The larger diameter provides greater strength compared to the thin factory torsion bars, offering improved handling and performance under extreme conditions. Made from Chromoly steel, these torsion bars are inherently more durable than the original, ensuring they can withstand the rigours of high-performance use while providing long-lasting reliability. Perfect for upgrading your suspension system for better control and durability.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC501300/28 – Rear Torsion Bars 21 3/4in -28mm Pair
Description:
- 21 3/4" long, 28mm diameter for increased strength
- Made from durable Chromoly steel for superior performance
- Ideal for off-road and racing applications with stiffer spring rate
- Stronger than factory torsion bars for enhanced durability
These heavy-duty rear torsion bars are designed for Swingaxle vehicles, measuring 21 3/4" in length and 28mm in diameter. Made from Chromoly steel, these torsion bars offer superior strength and durability, making them perfect for off-road and racing applications that require a stiffer spring rate. Compared to the thin factory torsion bars, the larger diameter and high-quality Chromoly construction ensure better resistance to wear and tear, providing reliable performance in demanding environments.
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC501311 – 2 Inch Dropped Spring Plates for Swing Axle
Description:
- Correct toe-in issues for lowered vehicles
- Extended slots for precise rear laser alignment
- Satin black powder-coated finish for durability
These 2-inch dropped spring plates are designed for vehicles with a swing axle suspension and a standard-length torsion bar measuring 21 3/4 inches. They offer a solution to correct toe-in problems that often arise when lowering the rear end of your vehicle. By providing extended slots, these plates enable proper laser alignment of the rear suspension, which improves handling and reduces premature tire wear.
In addition to enhanced alignment, the plates help eliminate the loose feeling typically experienced when using stock spring plates on lowered vehicles. The satin black powder coating provides an attractive, durable finish, ensuring long-lasting performance. Each pair requires 1 7/8-inch inner and outer bushes, and 1 pair is needed for each side of the vehicle.
Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1994,1995,1996,1997,1998,1999) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC501313 – 2 Inch Adjustable Dropped Spring Plates, Swing Axle
Description:
- Corrects rear toe-in issues for better alignment
- Reduces tyre wear and rear-end looseness
- Powder-coated satin black for durability
These 2-inch adjustable dropped spring plates are specifically designed for swing axle suspensions and standard-length torsion bars (21 ¾ inches). The slotted driveshaft mounting holes allow precise laser alignment of the rear suspension, which effectively reduces tire wear and rear-end instability common with stock plates. Perfect for those lowering their vehicle, these plates ensure smooth and secure adjustments, improving both handling and ride quality.
Each kit includes two adjustable spring plates and spacer plates to ensure optimal fit and secure movement, providing easy lift or drop based on your desired ride height. Finished in a satin black powder coating for enhanced durability, this kit requires 1 7/8" inner and outer bushings (one pair per side) for installation.
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC501314 – 4 Inch Adjustable Dropped Spring Plates, Swing Axle
Description:
- 4-inch adjustable spring plates for swing axle suspension.
- Corrects rear toe-in and improves alignment for better handling.
- Satin black powder-coated finish, includes spacer plates.
These 4-inch adjustable dropped spring plates are engineered for swing axle suspensions with standard-length torsion bars (21 3/4 inches). Ideal for lowering your vehicle, they correct rear toe-in issues by using slotted driveshaft mounting holes, allowing for precise laser alignment. This results in reduced tire wear and a firmer, more stable rear-end feel compared to stock spring plates.
Finished in satin black powder coat, the kit includes two adjustable spring plates and spacer plates, ensuring proper lift and drop for smooth movement. The required bush sizes are 1 7/8" inner and 2" outer, and one pair per side is needed for optimal fit and function.
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1994,1995,1996,1997,1998,1999) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC501316 – 2 Inch Dropped Spring Plates for Swing Axle, Pair
Description:
- -2" rear drop while maintaining correct spring plate angle and shock travel.
- Elongated axle tube holes for better toe-in adjustment.
- Durable satin black powder-coated finish for longevity.
Compatible Vehicles: - Beetle (1953,1954,1955,1956,1957,1958,1959) - Beetle Cabrio (1953,1954,1955,1956,1957,1958,1959) - Buggy/Baja (1953,1954,1955,1956,1957,1958,1959) - Karmann Ghia (1955,1956,1957,1958,1959) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968)
Notes:
To be fitted in conjunction with 1 7/8" i/d spring plate grommets, please check your old grommet design, they came as either a smooth donut or as a knobbly donut with four locating lugs.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC501320 – Adjustable Rear Spring Plates for Swing Axle Suspension
Description:
- Adjustable rear spring plates
- Designed for 21 3/4" torsion bars (standard on most late swing axle cars)
- Requires 2" inner and 1 7/8" outer torsion arm grommets
These adjustable rear spring plates are designed to ease the adjustment of rear torsion bars on swing-axle suspensions. They are compatible with 21 3/4" torsion bars, which were standard on most late swing axle vehicles. If your car doesn't have these torsion bars, they can be sourced from a donor vehicle or purchased separately.
To complete the installation, you'll need 2" inner and 1 7/8" outer torsion arm grommets. These plates streamline the adjustment process, offering precision and ease for your suspension setup.
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968)
Notes:Requires Urethane Torsion Arm Grommets AC510003 (inner) and AC510002 (Outer) to fit.To be used with 21 3\/4'' torsion bars
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja
AC501321 – Adjustable Rear Spring Plates for IRS Suspension
Description:
- Adjustable rear spring plates for easy suspension adjustment
- Designed for 26 9/16" rear torsion bars (IRS, 1973-1979 Beetles)
- Heavy-duty construction for long-lasting durability
- 6 1/8" collar fits 26 9/16" torsion bars
These adjustable rear spring plates are designed to enhance the suspension system of VW Beetles with IRS built from 1973 to 1979. Once installed, they allow for easy adjustment of the rear suspension, giving you greater control over your vehicle’s handling and ride quality. The heavy-duty construction ensures long-lasting durability and performance.
With a 6 1/8" collar specifically designed to fit 26 9/16" torsion bars, these swing plates provide a perfect fit for your Beetle’s IRS suspension. Ideal for both street and performance applications, these adjustable plates help you fine-tune your rear suspension setup for the optimal driving experience. Whether you're restoring your classic Beetle or upgrading its suspension, these plates are a must-have for any enthusiast.
Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - 924 (1976,1977,1978,1979)
Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC501325 – Adjustable Rear Spring Plates for IRS Suspension
Description:
- Adjustable rear spring plates for IRS rear suspension
- Simplifies rear torsion bar adjustment for ease of use
- Compatible with 21 3/4 inch torsion bars (late swing axle)
- Requires 2" inner and 1 7/8" outer torsion arm grommets
These adjustable rear spring plates are designed to make rear torsion bar adjustments a breeze. Ideal for IRS rear suspension, they eliminate the hassle of manual adjustments, allowing you to fine-tune your ride height and suspension setup with ease. They are specifically made to work with 21 3/4 inch torsion bars, which were commonly fitted to most late swing axle VW Beetles.
If your Beetle does not currently have these torsion bars, they can be sourced from a donor vehicle or purchased separately. In addition, the plates require 2-inch inner torsion arm grommets and 1 7/8-inch outer grommets for proper fitment. Perfect for enthusiasts looking to enhance their suspension system, these adjustable spring plates provide durability and reliability for both restoration and performance upgrades.
Compatible Vehicles: - Beetle (1968,1969,1970) - Beetle Cabrio (1968,1969,1970) - Buggy/Baja (1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)
Notes:
Requires Urethane Torsion Arm Grommets AC510003 (inner) and AC510002 (Outer) to fit. For 21 3\/4'' Torsion Bars
The spring plate is a universal aftermarket replacement. The two holes closest to the end fit both the three bolt and four bolt trailing arms. The centre hole lines up with the centre hole on the four bolt trailing arms. It is expected that you drills/slots the spring plate for the remaining bolt closest to the torsion bar. This is because the holes in the trailing arms are opposite each other on the mounting tab. The 4 bolt is at the top while the three bolt is at the bottom.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC501331 – 2 Inch Adjustable Dropped Spring Plates, Pair
Description:
- Easy ride height adjustment with grub screw block
- CNC robot welded with bespoke 48 spline broach
- Slotted mounts allow laser alignment and reduce tyre wear
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
AC501332 – 2 Inch Adjustable Dropped Spring Plates, Pair
Description:
- Easy ride height adjustment with grub screw block
- CNC robot welded with bespoke 50 spline broach
- Slotted mounts allow laser alignment and reduce tyre wear
Upgrade your suspension setup with this 2" Adjustable Dropped Rear Spring Plate Kit, designed for VW T2 Bay Window models from 1972–1979. Each kit includes two adjustable spring plates and a pair of spacer plates to maintain proper clearance to the rear spring plate grommet. Ride height is easily adjusted via the side-mounted grub screw block—no need to dismantle the rear axle.
Manufactured in the UK, these plates feature a custom 50 spline broach for precise torsion bar fitment, CNC robot welded for consistent quality, and finished in a smooth satin black powder coat. Slotted driveshaft mounting holes allow for laser alignment, correcting rear tow-in issues and dramatically improving tyre wear and handling.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC501333 – 2 Inch Adjustable Dropped Spring Plates, For Vehicles with Straight Axle, Pair
Description:
- Easy ride height adjustment with grub screw block
- CNC robot welded with bespoke 48 spline broach
- Slotted mounts allow laser alignment and reduce tyre wear
Upgrade your suspension setup with this 2" Adjustable Dropped Rear Spring Plate Kit, designed for VW T2 Split models from 1955–1967 with a straight axle conversion. Each kit includes two adjustable spring plates and a pair of spacer plates to maintain proper clearance to the rear spring plate grommet. Ride height is easily adjusted via the side-mounted grub screw block—no need to dismantle the rear axle.
Manufactured in the UK, these plates feature a custom 48 spline broach for precise torsion bar fitment, CNC robot welded for consistent quality, and finished in a smooth satin black powder coat. Slotted driveshaft mounting holes allow for laser alignment, correcting rear tow-in issues and dramatically improving tyre wear and handling.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC501356 – Handbrake Cable Extension Tubes
Description:
Handbrake cable extension tubes (pair) for VW Splitscreen. These are required when converting to straight axle.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
overall length 65mm
length to shoulder 57mm
overall diameter 12mm
internal diameter large end 10mm
internal diameter small end 6.9mm
Additional Vehicle Info: T2 Split
AC5015040-12 – Super Axle Long
Description:
- Ground smooth for a high-quality, smooth finish
- Non-tapered middle diameter for added strength
- Designed to twist under heavy load, preventing transaxle breakage
These high-performance axles are crafted to withstand extreme conditions, making them essential for racing or other high-performance applications. Unlike stock axles, the middle diameter is not tapered; it remains consistent all the way to the spline, allowing the axle to "twist" under heavy load. This unique design helps absorb stress and prevent transaxle breakage, offering enhanced reliability under high torque and stress.
Precision machined and heat-treated for maximum strength, these axles are ground smooth for a flawless finish. Whether you're upgrading for better durability or building a racing machine, these axles provide the necessary performance and toughness to handle the demands of high-speed driving.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle
AC5015084 – Off Road CV Joint
Description:
Empi high performance off-road CV joint for running increased loads and axle angles.
Features:
- 100mm O.D
-.750" Balls
- Each 33 spline inner race
- Solid outer race with chromoly cage
- 8.8mm I.D mounting holes x6
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Buggy/Baja,T2 Bay
AC501535A – Bolt for IRS Rear Suspension - Washers not Included
Description: IRS A arm bolt supplied in singles without washers, Replace your worn or stripped Pivot Mount Bolts with new. 17mm Head. Fits all I.R.S. pans.
Compatible Vehicles: - Beetle Australia (1971,1972,1973,1974,1975,1976) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Karmann Ghia,Type 3
AC5019597 – Anti Roll Bar Kit Rear for IRS
Description:
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
ac5019598 – Rear Anti Roll Bar Kit for Swing Axle Suspension
Description:
Rear anti roll bar kit, supplied with mounting hardware.
For Swingaxle suspension.
This must be used in conjunction with an uprated front anti roll bar.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC5019610 – Anti Roll Bar Kit Rear
Description:
- Easy installation with no vehicle modification required
- 7/8" heavy-duty rear anti roll bar for improved handling and control.
- Zinc-plated steel components with red urethane bushings.
This 7/8" heavy-duty rear anti-roll bar is designed to enhance handling, control body sway, and prevent wheel hop during hard cornering. The anti-roll bar features durable zinc-plated steel components and hardware for corrosion resistance, paired with high-performance red urethane bushings for a secure and smooth operation.
Installation is straightforward, with no vehicle modifications needed. The steel clamps hold the bushings firmly against the torsion tube, while the brackets bolt securely between the spring plate and trailing arm, ensuring a tight and reliable fit. This anti-roll bar is an essential upgrade for those looking to improve their suspension performance.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC5019615 – CB Performance Camber Compensator Rear
Description:
- Essential rear camber compensator for swing axle cars.
- Requires longer mounting studs; may interfere with original Z bar.
- Reduces roll, prevents wheel tuck, and enhances steering control.
The rear camber compensator is a crucial upgrade for all swing axle cars, designed to prevent dangerous rear wheel tuck and improve overall handling. It bolts directly to the bottom of the gearbox case and helps maintain proper alignment during cornering, reducing roll and eliminating wheel lifting.
To ensure a secure fit, longer mounting studs are required, and be aware that it may interfere with the original Z bar. This compensator not only enhances ride quality and control but also improves handling in crosswinds and offers better steering response. The CB Camber Compensator is an indispensable part of any performance-focused suspension system.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC5019970 – Swing Axle Boot Kit Blue Pair
Description:
Blue Swingaxle boot kit. Supplied as a pair with hardware to fit.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Notes:
Fit with the split horizontal facing towards the rear of the vehicle.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3
AC5019971 – Swing Axle Boot Kit Red Pair
Description:
Red Swingaxle boot kit. Supplied as a pair with hardware to fit.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Notes:Fit with the split horizontal facing towards the rear of the vehicle.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3
AC5019974 – Swing Axle Boot Kit Black Pair
Description:
Black Swingaxle boot kit. Supplied as a pair with hardware to fit.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Notes:
Colóquelo con la división horizontal orientada hacia la parte trasera del vehículo.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3
AC510000 – Rear Torsion Bar Grommets 1 3/4'' Pair
Description:
Urethane rear torsion bar grommets with knobby outers.(pair)
These are stiffer than rubber for improved handling but not too hard. The outers can be smooth or knobbly in finish, the ones you pick will be dictated by which spring plate covers you are using
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC510001 – Rear Torsion Bar Grommets 1 7/8'' Pair
Description:
Urethane rear torsion bar grommets with knobby outers.
These are stiffer than rubber for improved handling but not too hard. The outers can be smooth or knobbly in finish, the ones you pick will be dictated by which spring plate covers you are using
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Split,Type 3
AC510002 – Rear Torsion Bar Grommets Smooth 1 7/8'' Pair
Description:
Outer urethane rear torsion bar grommets with smooth outers. For use when adjustable spring plates are fitted to T1/T3
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC510003 – Rear Torsion Bar Grommets 2'' Pair
Description:
Urethane rear torsion bar grommets with knobby outers. For use when adjustable spring plates are fitted to T1/T3.
Can also be used on Standard T2 if knobs are cut off
These are stiffer than rubber for improved handling but not too hard. The outers can be smooth or knobbly in finish, the ones you pick will be dictated by which spring plate covers you are using
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split
ac510004 – Rear Torsion Bar Grommets Smooth 1 3/4'' Pair
Description:
Urethane rear torsion bar grommets with smooth outers.
These are stiffer than rubber for improved handling but not too hard. The outers can be smooth or knobbly in finish, the ones you pick will be dictated by which spring plate covers you are using
Compatible Vehicles: - Beetle (1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959) - Type 3 (1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3
AC511101 – Rear Torsion Arm Covers, Chrome, Pair, Swing Axle
Description:
- Chrome plated steel for a sleek, durable finish
- Protects suspension components from dirt, moisture, and debris
- Without hole for swing axle suspension
- Sold individually, two required per car
This rear torsion bar cover is designed specifically for swing axle suspension systems. Made from chrome-plated steel, it offers a high-quality replacement that adds both protection and style to your vehicle. With no hole for flexibility, this cover suits different suspension setups and installations.
Sold individually, you'll need two of these covers to fully restore the suspension system. The cover protects vital suspension components, ensuring they stay clean and functioning optimally. Ideal for classic VW restorations or replacing worn parts, it’s perfect for sunny climates where durability and style are key.
Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC511102 – Chrome Torsion Arm Covers Pair For IRS
Description:
Torsion Arm Covers. Supplied as a Pair in a Chrome Finish for IRS suspension.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Type 3
AC511102S – Stainless Steel Torsion Arm Covers Pair For IRS
Description:
Stainless steel spring plate cover, suitable for IRS Beetle's. Supplied as a pair.
Comes with 4 spacers that allow use with Type 3 IRS.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Type 3
AC511110 – Rear Suspension Bump Stop Urethane Pair
Description:
Urethane rear bump stops. Supplied as a pair.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC513001 – Coil Over Shock Absorbers 423/272mm Pair
Description:
- Chrome plated helper spring for added durability
- 423mm extended, 272mm collapsed
- Includes C-wrenches for easy adjustments
Enhance your off-road vehicle's performance with the Forst Oil-Over Shock Absorber, featuring a sleek chrome-plated helper spring. Designed specifically for Bajas, buggies, and trikes, this shock absorber offers exceptional durability and style. The chrome-plated spring not only adds a distinctive look but also provides reliable support.
The lower spring seat is adjustable, allowing for fine-tuning of the suspension firmness to suit different driving conditions. For convenient adjustments, C-wrenches are included in the package. Optimize your ride with this versatile shock absorber and tackle rough terrains with confidence.
Compatible Vehicles: - T2 Bay (1968,1969) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:423mm extended, 272mm collapsed. It is very important to fit the correct length shocks to a lowered vehicle. There must be at least 50mm of upward and downward travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need. i.e. A normal ride height measurement of 350mm means the new shock absorber must be at least 300mm when fully compressed and 400mm when fully extended. Prior to fitting new shock absorbers always cycle it through a few strokes in the correct orientation as it will be fitted to the vehicle.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC513200Z – Shock Absorber Bush Insert Sleeve
Description:
Bush insert sleeve for GAZ adjustable shock absorbers.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC513202Z – GAZ Coilovers Double Loop, 355-240mm, Pair, Rear
Description:
- Double-loop coilovers for late Beetle rear suspension.
- Adjustable damping and rebound for tailored performance.
- Maximum extended length 355mm; compressed 240mm.
Enhance the handling of your late Beetle with Gaz double-loop coilovers. Designed to fit rear suspension on late Beetles (excluding 1302 and 1303 models), these durable shock absorbers deliver precision control. The integrated adjustment knob allows you to fine-tune damping and rebound for an optimised driving experience, whether cruising or tackling corners.
Supplied as a pair, these coilovers feature a maximum extended length of 355mm and a compressed length of 240mm, offering versatility for various setups. Springs are not included but can be sourced with part number AC513302Z to complete the installation. Transform your Beetle's ride quality with this reliable and adjustable upgrade.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
- Gaz adjustable coilovers have all the benefits of GAZ shock absorbers above with the addition of a height adjustable spring set. They can be used to beef suspension up or raise cars that have been lowered too far when a complete tear town of the suspension is not desirable. The extended and collapsed lengths quoted do not include the bumpstop which is fitted. If this bump stop is left in place collapsed lengths will be 25mm longer. Springs for these shocks are supplied separately as the size depends on the application. When fitted to type 3 the adjustment knob can be tricky to get too.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,T2 Split
AC513204Z – Coilover Shock Absorber, Double Loop, 405-265mm, Pair
Description:
Gaz double loop coilover with a eye top and bottom fitting for the rear of the vehicle. suitable for late Beetle. The coilover has a maximum extended of 405mm and a maximum compressed length of 267mm. Each shock includes a knob to adjust the damping and rebound of the damper. Supplied as a pair but without springs
Can be used on the rear of late Beetle models with a ball joint front beam but not 1302 or 1303
Gaz adjustable coilovers have all the benefits of GAZ shock absorbers above with the addition of a height adjustable spring set. They can be used to beef suspension up or raise cars that have been lowered too far when a complete tear town of the suspension is not desirable. The extended and collapsed lengths quoted do not include the bumpstop which is fitted. If this bump stop is left in place collapsed lengths will be 25mm longer. Springs for these shocks are supplied separately as the size depends on the application. When fitted to type 3 the adjustment knob can be tricky to get too.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
For the springs use part number AC513303Z
" Important Fitting Notice ".
" Please thoroughly clean and lightly lubricate the threads of the shock & adjusting collar prior to turning the collar.
This will avoid galling thread damage and any dirty threads."
Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,T2 Split
AC513302Z – GAZ Coil Over Shock Absorber Spring
Description:
Gaz spring for use on AC513202Z coilover shocks. Supplied each
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC513303Z – GAZ Coil Over Shock Absorber Spring
Description:
Gaz spring for use on AC513203Z and AC513204Z coilover shocks. Supplied each
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC513KG5530 – KYB Gas-A-Just Rear Shock Absorber 565/345
Description:
KYB Gas-A-Just shock designed to fit T2 rear. Standard/moderately lowered.
KYB gas a just are a heavy duty shock with heavy duty damping. These are best suited to Type 2 buses or the rear of smaller vehicles that need beefing up. Gas pressureised with a firm ride
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against te shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)
Additional Vehicle Info: Brazil Kombi,T2 Bay
AC513KG5557 – KYB Gas-A-Just Rear Shock Absorber
Description:
KYB Gas-A-Just shock absorber for the rear of T25.
Heavy duty gas pressurised shock ideal for T25.
Sold Individually
Compatible Vehicles: - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Additional Vehicle Info: T25
AC530004 – A-Arm Conversion Brackets For IRS Pair
Description:
IRS a-arm conversion brackets for mounting IRS Beetle A-arms.
These weld to the floorpan on swing axle vehicles to convert to IRS rear suspension
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966) - Type 3 (1962,1963,1964,1965,1966)
Notes:Pivot bolts also available: 113-501-535\/A Jig to ensure correct alignment: AC000155
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC530020 – A-Arm Bushes For IRS Set
Description:
Urethane IRS A-arm bushes. Supplied with metal sleeves. 4 bushes and 2 sleeves
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC598002 – CSP Rear Disc Brake Kit For 5x205 Stud Pattern
Description:
- Complete bolt-on kit for T1 -67 short axle Beetles
- High-quality CNC machined aluminium for durability
- Maintains wide-5 stud pattern, enhancing braking performance
Upgrade your pre-1967 short axle Beetle with the CSP Rear Disc Brake Kit in a 5x205mm stud pattern. Manufactured in Germany, this high-quality kit is designed for easy installation, allowing you to enhance your braking system without compromising the classic look. CNC machined from die-cast aluminium, it offers a significant performance boost over original drum brakes, eliminating brake fade and ensuring safety in modern traffic and will not increase the rear track of your vehicle.
Designed to maintain the original rear track, this kit works seamlessly with a wide range of 5x205 stud pattern wheels, including all aftermarket options and standard 15" steel wheels. Remember, for optimal performance, you’ll need to pair the kit with the appropriate upgraded master cylinder (AC611002) and the necessary adapters (AC698012 for RHD or AC698011 for LHD). Elevate your Beetle’s braking power and reliability with this essential upgrade!
Compatible Vehicles: - Beetle (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC598002P – CSP 5x130 Rear Brake Disc Kit for Swing Axle
Description:
- Designed for swing axle rear suspension for improved performance
- High-quality German braking technology ensures reliability
- Complete kit includes discs, callipers, and pads
- Comes with handbrake cables, calliper brackets, and mounting hardware
Enhance your vehicle's braking performance with the CSP 5x130 PCD Rear Disc Brake Kit, specifically engineered for swing axle rear suspension. This comprehensive kit features top-tier German braking technology, providing the reliability and performance you need for confident driving.
Included in the kit are high-quality discs, callipers, and pads, along with handbrake cables and calliper brackets. All necessary mounting hardware is also provided, ensuring a straightforward installation process. Upgrade your braking system today for improved safety and control on the road.
Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Buggy/Baja (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:We recommend fitting a high performance master cylinder to complement this conversion
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC598005 – CSP Rear Disc Brake Kit for 5x205 Stud Pattern Straight Axle Conversion
Description:
- Designed for swing axle models up to 1967
- Compatible with 5/205 stud pattern wheels
- Complete CSP kit for enhanced rear braking performance
Enhance your classic Volkswagen Bus with this CSP Rear Disc Kit, specifically designed for swing axle models up to 1967. This high-quality kit allows you to upgrade your rear brakes to disc, providing improved stopping power and reliability.
Featuring a 5/205 stud pattern, this kit is compatible with a wide range of wheels, ensuring a seamless fit for your vehicle. With everything you need for installation included, you can easily enjoy the benefits of modern braking performance while maintaining the classic aesthetic of your Bus. Upgrade your ride and experience safer, more responsive braking with this essential disc brake kit.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC598034 – Four Stud To Wide Five Drum Spacer Kit
Description:
Used for Splitscreen vans having straight axle or Beetle IRS conversions fitted. (Will also work on Beetles converting to Wide 5 )
These spacers are for converting a 4 stud beetle gearbox into a wide 5 one.
Very simple to fit, unbolt and remove your 4 stud drum, slip 1 thin spacer onto drive shaft then fit an up to 1966 beetle drum, then fit the thick spacer and refit the 36mm hub nut, torque up and fit split pin job done.
Advantages to fitting these are you get the wide 5 stud pattern and you get to run the later wider brake shoes.
If using early pre 1966 beetle drums you will find they use smaller M12 wheel bolts.
It may be wise to get the holes opened up and taped out to M14 if running them on a Splitscreen van.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split
AC598073 – Brake Pipe Mounts Bolt-On
Description:
Axle tube brake pipe holders, early pre 60 vehicles had these then later on these plates are welded to the tubes.
The mounts can be positioned wherever you need them to go. Very easy to fit and plated to resist corrosion.
Supplied as a pair.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959)
Additional Vehicle Info: T2 Split
AC598222870 – EMPI Rear Disc Brake Kit IRS and Swing Axle (long spline) 4x130
Description:
- Complete kit: discs, calipers, brackets, pads, cables, and hardware
- Designed for easy installation and maintenance
- 4x130 stud pattern with 14mm threaded holes
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972) - Beetle Cabrio (1968,1969,1970,1971,1972) - Buggy/Baja (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972) - T2 Split Bus (1967) - Type 3 (1968,1969,1970,1971,1972)
Notes:Can be used on T2 <1967 with T1 Straight axle conversion, however handbrake cables will be too short. Replacement cables are available separately - part AC6096099 Replacement pads are available separately - AC6982891
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Split,Type 3
AC598222871 – EMPI Rear Disc Brake Kit For IRS 4x130 Stud Pattern
Description:
- Complete kit with discs, calipers, and hardware
- Includes handbrake cables and mounting brackets
- Compatible with 4x130 stud pattern and IRS suspension
Upgrade your classic VW with the EMPI Rear Brake Disc Kit, designed for vehicles with a 4x130 stud pattern and IRS (Independent Rear Suspension). This comprehensive kit includes everything needed for a smooth installation: high-quality discs, calipers, mounting brackets, pads, handbrake cables, and all necessary hardware. It's engineered for improved braking performance and reliability, making it an essential upgrade for your vehicle.
The kit also features handbrake cables with an overall length of 1727mm, ensuring a perfect fit. For ongoing maintenance, replacement handbrake cables (AC6096096) and pads (AC6982891) are available separately. Whether you're restoring a classic or enhancing your ride, this kit delivers exceptional quality and performance.
Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)
Notes:
Replacement handbrake cables are available separately - AC6096096 Replacement pads are available separately - AC6982891
Overall cable length 68 inches
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC598222905 – EMPI Rear Disc Brake Kit For 5x205 Stud Pattern
Description:
- Complete kit with rotors, calipers, and mounting hardware
- 5x205 stud pattern for compatibility with classic Volkswagens
- Includes handbrake cables and pads for easy installation
Enhance your vehicle’s braking system with the EMPI Rear Disc Brake Kit, designed for optimal performance and reliability. This comprehensive kit features everything you need for a successful installation, including rotors, calipers, mounting brackets, pads, handbrake cables, and all necessary hardware.
With a 5x205 stud pattern, this kit ensures compatibility with a range of classic Volkswagen models, allowing you to upgrade your rear brakes with ease. Experience improved stopping power and greater control on the road with this all-in-one solution from EMPI, making your driving experience safer and more enjoyable.
Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Buggy/Baja (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
Replacement handbrake cables, discs and pads are available separately - AC6096096, AC6982891
Cable length 68 inches
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC598222906 – Rear Disc Brake Kit for 5x205 Stud Pattern, Zero Offset.
Description:
- Complete kit with all necessary mounting hardware
- Zero Off-Set for perfect fit
- Suitable for 1968 to 1972 VW Beetles
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972) - Beetle Cabrio (1968,1969,1970,1971,1972) - Buggy/Baja (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972) - Type 3 (1968,1969,1970,1971,1972)
Notes:Can be used on Splitscreen >1967 with Beetle straight axle conversion, however handbrake cables will be too short. Replacement cables and pads are available separately - part AC6096099, AC6982891
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC598222907 – EMPI Rear Disc Brake Kit For 5x205 Stud Pattern
Description:
- Designed for 5x205 stud pattern for classic Volkswagens
- Complete kit includes discs, calipers, and mounting hardware
- Comes with pads and handbrake cables for straightforward installation
Enhance your vehicle's braking system with the EMPI Zero Offset Rear Disc Brake Kit, specifically designed for the 5x205 stud pattern found in classic Volkswagens. This comprehensive kit provides everything you need for a successful installation, including high-quality discs, calipers, mounting brackets, pads, handbrake cables, and all necessary hardware.
The zero offset design ensures optimal performance while maintaining tire clearance, making it a perfect upgrade for enthusiasts looking to improve their braking capabilities. Enjoy enhanced stopping power and control with this all-in-one rear disc brake solution, delivering reliability and performance for your vintage ride.
Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)
Notes:
Can be used on Splitscreen >1967 with Beetle straight axle conversion, however handbrake cables will be too short. Replacement handbrake cables and pads are available separately - AC6096096, AC6982891
Cable length 68 inches
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC598222912 – Rear Brake Disc Kit For 5x130 or 5x4.75'' Stud Pattern
Description:
- Double drilled for 5x130 Porsche and 5x4.75" Chevy patterns
- Complete kit includes discs, calipers, and mounting hardware
- Comes with pads and handbrake cables for easy installation
Upgrade your braking system with the EMPI Rear Disc Brake Kit, featuring a versatile double-drilled design for both 5x130 Porsche and 5x4.75" Chevy patterns. This complete kit provides everything you need for a successful installation, including high-quality discs, calipers, mounting brackets, pads, handbrake cables, and all necessary hardware.
Designed for performance and reliability, this rear disc brake kit ensures improved stopping power and enhanced control for your vehicle. Whether you're customising your ride or enhancing safety, the EMPI kit delivers a straightforward installation process and exceptional braking performance, making it an excellent choice for any automotive enthusiast.
Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Buggy/Baja (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
Replacement handbrake cables, discs and pads are available separately - AC6096096, AC6982891, AC6152843 Can be used on 73> vehicle with the addition of 2 x AC6155281
Cable length 68 inches
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC598222913 – Rear Disc Brake Kit For 5x130 or 5x4.75'' Stud Pattern
Description:
- Double drilled for 5x130 Porsche and 5x4.75 Chevy patterns
- Complete kit includes everything for easy installation
- Designed for enhanced braking performance
Upgrade your vehicle’s braking system with the Empi Rear Disc Brake Kit, specifically designed for use with 15-inch wheels. This complete kit features double-drilled discs to accommodate both the 5x130 Porsche pattern for 14mm studs and the 5x4.75 inch Chevy pattern for 12mm studs, ensuring versatile compatibility.
The kit comes fully equipped with discs, calipers, mounting brackets, pads, handbrake cables, and all necessary hardware for a straightforward installation. Please note that wheel studs are not included. Enhance your vehicle's stopping power and reliability with this high-quality rear disc brake kit from Empi
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972) - Beetle Cabrio (1968,1969,1970,1971,1972) - Buggy/Baja (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
Can be used on Splitscreen >1967 with Beetle straight axle or IRS conversion, however handbrake cables will be too short. Replacement cables, discs and pads are available separately - part AC6096099, AC6982891, AC6152843
Overall cable length 72 inches
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Split,Type 3
AC598226154B – Brake Disc Kit, Rear, Wilwood Calipers, 5x130
Description:
High Performance Front disc brake kit with hand brake cables. Engineered in partnership with Wilwood for maximum performance and easy bolt on installation, no modifications required to fit this kit.
Complete Kit Includes:
High Performance Wilwood Calipers
High Performance Wilwood Brake Pads
Zinc Plated Cross Drilled and Slotted Brake Rotors
Caliper Brackets
DOT Approved Stainless Steel Brake Lines
E-Brake Cables
Hardware and Seals
Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1956,1958,1959,1960,1961,1962,1963,1964,1965,1966)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC598226155B – Rear Disc Kit, Wilwood, 5x130, Drilled, Black Calipers
Description:
High Performance rear disc brake kit with hand brake cables. Engineered in partnership with Wilwood for maximum performance and easy bolt on installation, kits feature Wilwood calipers and brake pads. No modifications required to fit this kit.
Complete Kit Includes:
High Performance Wilwood Calipers
High Performance Wilwood Brake Pads
Zinc Plated Cross Drilled and Slotted Brake Rotors
Caliper Brackets
DOT Approved Stainless Steel Brake Lines
E-Brake Cables
Hardware and Seals
Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC5982863 – nan
AC5989303 – CV Boot Kit, Off Road
Description:
100mm Off road CV boot kit including flange seal. Sold individually.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC601002BM – SSP BRM Alloy Wheel Matt Black 5Jx15'', 5x205 PCD, ET14
Description:
SSP BRM alloy wheel with a matt black and silver finish.
Originally made as 5/205 PCD by Speedwell, the SSP BRM has improved on the offsets making this a far more versatile wheel. Now also available as a 5/112 PCD for fitment on 71 onwards Type 2’s. Original style centre cap features a stainless steel spring clip to ensure the best fit possible.
Stud pattern - 5 x 205
Wheel width - 5j
Wheel diameter - 15"
Offset – ET14
Load rating – 695kg
Beetle / Ghia fitment requires 12mm wheel bolts AC601SB05.
T2 Split / Bay fitment requires 14mm wheel bolts AC601SB32
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
Flat centre cap is included, but deep centre cap is also available for clearing T2 hub nut or grease cap, see part number AC601C003.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Notes:To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC601002BP – SSP BRM Alloy Wheel Gloss Black 5x15", 5x205 PCD, ET14
Description:
SSP BRM alloy wheel with a gloss black finish and polished edges.
Originally made as 5/205 PCD by Speedwell, the SSP BRM has improved on the offsets making this a far more versatile wheel. Now also available as a 5/112 PCD for fitment on 71 onwards Type 2’s. Original style centre cap features a stainless steel spring clip to ensure the best fit possible.
Stud pattern - 5 x 205
Wheel width - 5j
Wheel diameter - 15"
Offset – ET14
Load rating – 695kg
Beetle / Ghia fitment requires 12mm wheel bolts AC601SB05.
T2 Split / Bay fitment requires 14mm wheel bolts AC601SB32
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
Flat centre cap is included, but deep centre cap is also available for clearing T2 hub nut or grease cap, see part number AC601C003.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)
Notes:To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC601003BP – SSP BRM Alloy Wheel Gloss Black 5.5x15'', 5x112 PCD, ET12
Description:
SSP BRM alloy wheel with a gloss black finish and polished edges.
Originally made as 5/205 PCD by Speedwell, the SSP BRM has improved on the offsets making this a far more versatile wheel. Now available as a 5/112 PCD for fitment on 71 onwards Type 2’s. Original style centre cap features a stainless steel spring clip to ensure the best fit possible.
Stud pattern - 5 x 112
Wheel width - 5.5j
Wheel diameter - 15"
Offset – ET12
Load rating – 695kg
T2 Bay fitment requires 14mm wheel nuts AC601SN001A and the tool AC601T001A.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
Flat centre cap is included, but deep centre cap is also available for clearing T2 hub nut or grease cap, see part number AC601C003.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Notes:To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: Brazil Kombi,T25,T2 Bay
AC601004BP – Fooks Alloy Wheel, Black & Polished, 4.5x15, 5x130, ET45
Description:
SSP Fooks alloy wheel with black detailing and polished spokes.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 130
Wheel width - 4.5j
Wheel diameter - 15"
Offset – ET45
Load rating – 695kg
Requires 14mm wheel bolts AC601SB34R or wheel nuts AC601SN17BR.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1963,1964,1965) - 912 (1965,1966,1967,1968,1969) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: 356,912,Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC601004C – SSP Fooks Alloy Wheel Chrome 4.5x15", 5x130 PCD, ET45
Description:
SSP Fooks alloy wheel with a chrome plated finish.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 130
Wheel width - 4.5j
Wheel diameter - 15"
Offset – ET45
Load rating – 695kg
Requires 14mm wheel bolts AC601SB34R or wheel nuts AC601SN17BR.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Split,Type 3
AC601004P – SSP Fooks Alloy Wheel Polished 4.5x15", 5x130 PCD, ET45
Description:
SSP Fooks alloy wheel with a fully polished finish.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 130
Wheel width - 4.5j
Wheel diameter - 15"
Offset – ET45
Load rating – 695kg
Requires 14mm wheel bolts AC601SB34R or wheel nuts AC601SN17BR.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Type 4 (1968,1969,1970,1971,1972,1973,1974)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Brazil Kombi,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3
AC601005BP – Fooks Alloy Wheel, Black and Polished, 5.5x15, 5x130, ET45
Description:
SSP Fooks alloy wheel with black detailing and polished spokes.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 130
Wheel width - 5.5j
Wheel diameter - 15"
Offset – ET45
Load rating – 695kg
Requires 14mm wheel bolts AC601SB34R or wheel nuts AC601SN17BR.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1964,1965) - 911 (1968,1969,1970,1971,1972,1973) - 912 (1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: 356,911,912,912E,914,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split
AC601005C – SSP Fooks Alloy Wheel Chrome 5.5x15", 5x130 PCD, ET45
Description:
SSP Fooks alloy wheel with a chrome plated finish.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 130
Wheel width - 5.5j
Wheel diameter - 15"
Offset – ET45
Load rating – 695kg
Requires 14mm wheel bolts AC601SB34R or wheel nuts AC601SN17BR.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991) - 911 (1968,1969,1970,1971,1972,1973) - 912 (1968,1969) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: 356,911,912,914,Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,T2 Split,Type 3
AC601005P – SSP Fooks Alloy Wheel Polished 5.5x15'', 5x130 PCD, ET45
Description:
SSP Fooks alloy wheel with a fully polished finish.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 130
Wheel width - 5.5j
Wheel diameter - 15"
Offset – ET45
Load rating – 695kg
Requires 14mm wheel bolts AC601SB34R or wheel nuts AC601SN17BR.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991) - 911 (1968,1969,1970,1971,1972,1973) - 912 (1968,1969) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: 356,911,912,914,Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,T2 Split,Type 3
AC601006BP – SSP Fooks Alloy Wheel Black and Polished 5.5x15", 5x112 PCD, ET20
Description:
SSP Fooks alloy wheel with black detailing and polished spokes.
Created in 1967 for the Porsche 911, these wheels have long been popular with aircooled enthusiasts. SSP Fooks offer a choice of stud pattern for Porsche, Late Bay and T25, and a choice of widths to get your car sitting just right. We have even included the original heart shape around the valve cap to ensure these are the best on the market.
Stud pattern - 5 x 112
Wheel width - 5.5j
Wheel diameter - 15"
Offset – ET20
Load rating – 695kg
T2 Bay requires 14mm wheel nuts AC601SN17B.
T25 requires wheel bolts AC601SB32 for the front and wheel nuts AC601SN17B for the rear.
** Wheel nuts or bolts supplied free of charge when you purchase a set of 4 wheels, please add a note on the order with your vehicle model, year and whether you have standard or aftermarket brakes fitted.
*All wheels have a 2 year structural warranty, painted wheels carry a 2 year warranty on finish, chrome wheels have a 1 year warranty on finish, and polished wheels will require regular polishing to maintain the finish.
These wheels are not TÜV certified.
Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Notes:
On certain vehicle models, the grease cap may protrude too far, preventing the supplied centre cap from fitting correctly. This issue can be resolved by either installing wheel spacers to create additional clearance between the wheel and hub, or by using taller centre caps (part number AC601C911A) to accommodate the grease cap.
To maintain the finish and comply with warranty these wheels should be treated regularly with a quality wheel wax or sealant.
Additional Vehicle Info: Brazil Kombi,T25,T2 Bay
Replies have been locked on this page!