211-809-585/CR – Outer Sill, Sliding Door Side
Description:
Outer sill panel for under the sliding door when used on a left or right hand drive model.
Probably one of the more common areas on a Baywindow to rust is the outer sills. This replacement provides an economic repair to get you bus back on the road without breaking the bank, Being a reproduction labelled part it is suited for a budget restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-809-585/CR/BQ – Outer Sill, Sliding Door Side
Description:
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-809-586/R – Outer Sill, Non Sliding Door Side
Description:
Outer sill including drainage holes for non sliding door side to fit left or right hand drive.
Probably one of the more common areas on a Baywindow to rust is the outer sills. This replacement provides an economic repair to get you bus back on the road without breaking the bank, Being a reproduction labelled part it is suited for a budget restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-809-599/D – Front Wheel Arch, Left
Description:
- Targets common rust-prone areas
- Cost-effective repair solution
- Ideal for budget rebuilds and restorations
The front wheel arches on a Baywindow, especially the lower section near the step, are prone to rust. This left-hand side front wheel arch repair panel offers a practical and affordable solution to address the issue without the expense of replacing the entire arch.
As a reproduction quality labelled part, this panel is perfect for budget-friendly rebuilds and restorations. It provides a reliable fix, ensuring your vehicle is restored to its original condition without breaking the bank.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-809-600/B – Outer Front Wheel Arch Right
Description:
Front right wheel arch outer skin repair for 63>67 year vehicles, also often referred to as 'Thin Lip Dog Legs'. Laser cut and formed from 1mm steel.
Compatible Vehicles: - T2 Split Bus (1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-809-600/D – Front Wheel Arch, Right
Description:
- Targets common rust-prone areas
- Cost-effective repair solution
- Ideal for budget rebuilds and restorations
The front wheel arches on a Baywindow, especially the lower section near the step, are prone to rust. This right-hand side front wheel arch repair panel offers a practical and affordable solution to address the issue without the expense of replacing the entire arch.
As a reproduction quality labelled part, this panel is perfect for budget-friendly rebuilds and restorations. It provides a reliable fix, ensuring your vehicle is restored to its original condition without breaking the bank.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-809-673/A – Blanking Grommet
Description:
This blanking grommet is used to blank unwanted drain holes in inner front wheel arches.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)
Additional Vehicle Info: T25,T2 Bay
211-813-133/R – Engine Hatch Seal for 1700-2000 Type 4 Engines
Description:
Engine hatch rubber seal to fit vans fitted with 1700-2000 type 4 engines.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-161/M – Battery Tray Left
Description:
Battery tray for leisure battery installation on the left hand side
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine bay side trays. This replacement tray contours the body perfectly and provides a seam, and finish equal to that of the original. Being a top quality labelled part, it is ideal for a high-end restoration, repairs or in this case a leisure battery install.
Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-162/BK1 – Battery Tray Bracket, Top
Description: Replacement battery securing bracket for the top side of all Bay window battery trays.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-162/BK2 – Battery Tray Bracket, Bottom
Description: Replacement battery securing bracket for the bottom side of all Bay window battery trays.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-162/M – Battery Tray Right
Description:
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-162/MR – Battery Tray, Right
Description:
- Economical solution for rust or damage
- Ideal for budget-friendly repairs
- Reproduction quality for cost-effective restorations
The engine bay side trays on a Baywindow are often susceptible to rust or damage from rear-end accidents. Our right side battery tray offers an affordable repair option to restore your vehicle without the expense of more extensive replacements.
This replacement tray is a reproduction-quality part, making it perfect for budget restorations and repairs. Get your Baywindow back in top shape and on the road quickly with this cost-effective and reliable solution.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-162/NA – Battery Tray Right
Description:
Battery tray for the right hand side
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine bay side trays. This replacement tray with its OE spec pressings contours the body perfectly and provides a seam, and finish equal to that of the original. Being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-163 – Left Hand Battery Tray 12V
Description:
Battery tray for the left side 12v
Featuring top and bottom brackets to secure battery. Laser cut, pressed and hand finished. The main body is 1mm steel, the top and lower brackets are 2.5mm steel
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-163/A – Gas Bottle Tray Left
Description:
Platform gas bottle tray for the left side on Splitscreen buses 1955-1967
Laser cut, pressed and hand finished. The main body is 1mm steel
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-164 – Right Hand Battery Tray 12V
Description:
Right hand side battery tray in the engine bay.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-164/6V – Right Hand Battery Tray 6V
Description: Battery tray for the right side of the engine bay - 6V only
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-164/AX/BQ – Right Hand Battery Tray
Description:
Battery tray right hand side (Part may come with raised plinth for battery) Red heavy duty
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-165/H – Battery Tray - Left
Description:
Battery tray - left
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine bay side trays. This replacement tray with its OE spec pressings contours the body perfectly and provides a seam, and finish equal to that of the original. Being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-165/NA – Battery Tray - Left
Description:
Battery tray - left
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine bay side trays. This replacement tray with its OE spec pressings contours the body perfectly and provides a seam, and finish equal to that of the original. Being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-167 – Left Hand Engine Bay Side Plate
Description:
Left hand side, engine bay side plate, Includes Seal retaining channel.
Compatible Vehicles: - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-168 – Right Hand Engine Bay Side Plate
Description:
Right hand side engine bay side plate, includes seal retaining channel.
Compatible Vehicles: - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-175/A – Rear Valance for Church Key
Description:
Rear valance for church key, supplied with recessed engine lid latch plate, crank handle hole and no exhaust cut out as per the original.
Fitments:
Splitscreen vans 55-59
Pick up models 50-55
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958)
Additional Vehicle Info: T2 Split
211-813-175/B – Rear Valance for Church Key Engine Lid
Description:
- High-quality rear valance for VW T2 Splits (1959-1965)
- Complete with catch for the engine lid latch
- Designed for Church Key style engine lids
- Perfect fit for restoring the rear end of your classic VW
This premium rear valance is designed specifically for VW T2 Splits from 1959 to 1965, featuring a complete catch for the engine lid latch. It is the perfect solution for restoring your vehicle's rear end, offering a precise fit for Church Key style engine lids.
Crafted for durability and authenticity, this rear valance ensures a seamless integration with your classic van. Whether you are restoring your T2 or replacing a damaged or worn part, this valance will help maintain the original look and functionality of your VW.
Compatible Vehicles: - T2 Split Bus (1958,1959,1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: T2 Split
211-813-175/C – Rear Panel Valance for Push Button Engine Lid
Description:
- Precision fit for push-button/lock engine lids
- Restores OEM look and function
- High-quality, durable construction
This replacement rear panel valance is designed to seamlessly fit vehicles equipped with push-button or lock-style engine lids, restoring the original look and functionality of your vehicle’s rear section. Crafted from high-quality materials, this panel ensures long-lasting durability and resistance to wear.
Easy to install, the panel aligns perfectly with OEM specifications for a secure, hassle-free replacement. Whether upgrading a damaged part or restoring your vehicle’s factory aesthetic, this valance provides the quality and fit you need.
Compatible Vehicles: - T2 Split Bus (1966,1967)
Additional Vehicle Info: T2 Split
211-813-175/CR – Rear Valance
Description:
Rear apron
Compatible Vehicles: - T2 Split Bus (1966,1967)
Additional Vehicle Info: T2 Split
211-813-175/D – Rear Valance, 4 Hole
Description:
Rear valance
Complete rear valance with four mounting holes for early bay window bus from 1968 to 1971.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - Baywindow USA (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-176 – Rear Valance Fitting Kit
Description:
Complete stainless steel fitting kit for the rear valance on all splitscreen vans. Supplied with two washers per main mounting bolt, a penny washer to protect the paint, and a serrated washer to avoid engine vibration loosening the mounting bolts.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-216 – Engine Lid Hinge Panel Inner
Description:
Inner engine lid hinge panel cross support.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962)
Additional Vehicle Info: T2 Split
211-813-217 – Inner Engine Lid Hinge Panel Red HD
Description:
Inner engine lid hinge panel cross support.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-227 – Engine Lid Hinge Panel Carrier
Description:
Engine lid hinge panel carrier.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-813-227/AA – Engine Lid Hinge Panel
Description:
Engine lid hinge panel
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962)
Additional Vehicle Info: T2 Split
211-813-227/AB – Engine Lid Hinge Panel
Description:
Engine lid hinge panel
Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966)
Additional Vehicle Info: T2 Split
211-813-227/AC – Engine Lid Hinge Panel
Description:
Engine lid hinge panel.
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine lid hinge panel. This replacement with its OE spec pressings contours the body perfectly and provides a seam, and finish equal to that of the original. Being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - T2 Split Bus (1967)
Additional Vehicle Info: T2 Bay,T2 Split
211-813-227/C – Engine Lid Hinge Panel
Description:
Engine lid hinge panel
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine lid hinge panel. This replacement provides a good cost effective repair to get you bus back on the road without breaking the bank, Being a good quality labelled part it is suited for a mid-budget restoration or repair.
Compatible Vehicles: - T2 Bay (1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-227/H – Engine Lid Hinge Panel
Description:
Engine lid hinge panel.
Probably one of the more common areas on a Baywindow to rust or to suffer from rear-end accident damage is the engine lid hinge panel. This replacement with its OE spec pressings contours the body perfectly and provides a seam, and finish equal to that of the original. Being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975)
Additional Vehicle Info: T2 Bay
211-813-239/A – Inner Wall, Rear Cargo Area Left
Description:
Inner Wall, Rear Cargo Area Left
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962)
Additional Vehicle Info: T2 Split
211-813-239/B – Inner Wall, Rear Cargo Area Left
Description:
Inner Wall, Rear Cargo Area Left
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1963)
Additional Vehicle Info: T2 Split
211-813-239/C – Inner Wall, Rear Cargo Area Left
Description:
Inner Wall, Rear Cargo Area Left
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-240/A – Inner Wall, Rear Cargo Area Right
Description:
Inner Wall, Rear Cargo Area Right
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962)
Additional Vehicle Info: T2 Split
211-813-240/B – Inner Wall, Rear Cargo Area Right
Description:
Inner Wall, Rear Cargo Area Right
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1963)
Additional Vehicle Info: T2 Split
211-813-240/C – Inner Wall, Rear Cargo Area Right
Description:
Inner Wall, Rear Cargo Area Right
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-243/B – Rear Shelf Over Engine Bay
Description:
- Premium SSP panel for optimal fit and finish
- Finished in silver weld-through primer for easy installation
- Includes strengthening braces for added durability
Upgrade your vehicle's rear shelf over the engine bay with this top-quality SSP panel, designed for the best fit possible. Finished in silver weld-through primer, this panel eliminates the extra prep time required for standard painted panels—simply align, clamp, and weld for a seamless installation.
This complete rear shelf not only enhances the appearance of your engine bay but also features strengthening braces that provide additional support and durability. Ideal for restorations or upgrades, this panel ensures your vehicle maintains its structural integrity while delivering a clean, professional look. Make your installation process easier and your ride more robust with this essential component.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-247 – Spare Wheel Well
Description:
Spare wheel well for the floor above the engine bay, usually on walk through models from 1955 to 1967 but is used on some other models also.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-259/B – Engine Lid Catch Plate
Description:
Engine lid catch plate.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - T2 Split Bus (1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
211-813-259/C – Engine Lid Catch Plate
Description:
Engine lid catch plate
To fit Baywindow 1972 to 1979 and T25 pickup models from 1980-1992
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Additional Vehicle Info: T25,T2 Bay
211-813-273/D – Rear Valance Outer
Description:
Outer rear valance.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-343/B – Complete Rear Corner Left
Description:
- Designed to replace rusted or damaged rear corner panels
- Includes light recess and air intake vent for easy installation
- Ideal for high-end restorations or repairs
- Top quality construction ensures durability and fit
Revitalise your vehicle with this rear corner panel designed for the left-hand side, featuring both a light recess and an air intake vent. One of the most common areas for rust or damage from rear-end accidents, replacing your old panel is essential for restoring both function and aesthetics.
This high-quality replacement panel is perfect for those looking to undertake a meticulous restoration or repair. Its robust construction ensures it will stand up to the rigours of the road while seamlessly integrating into your bus. Get your vehicle back on the road with confidence using this reliable rear corner panel.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-343/R – Complete Rear Corner Brazilian Specification Left
Description:
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Bay,T2 Split
211-813-344/B – Complete Rear Corner Right
Description:
- Designed to replace rusted or damaged rear corner panels
- Includes light recess and air intake vent for easy installation
- Ideal for high-end restorations or repairs
- Top quality construction ensures durability and fit
Revitalise your vehicle with this rear corner panel designed for the right-hand side, featuring both a light recess and an air intake vent. One of the most common areas for rust or damage from rear-end accidents, replacing your old panel is essential for restoring both function and aesthetics.
This high-quality replacement panel is perfect for those looking to undertake a meticulous restoration or repair. Its robust construction ensures it will stand up to the rigours of the road while seamlessly integrating into your bus. Get your vehicle back on the road with confidence using this reliable rear corner panel.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-344/R – Complete Rear Corner Brazilian Specification Right
Description:
Rear corner panel including the rear light recess and samba corner window to fit the right hand side.
A bit of an odd one this panel but these are fitted to some standard Brazilian Kombi’s.
Not correct for German Splitscreens or German Bay windows but can be used as a partial repair section.
Lower section can be used for repairing a standard late Bay window around the taillight area only, upper section can be used on a split screen samba. Lower corner section (not including lamp area) can be used on a split screen or an early Bay.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Bay,T2 Split
211-813-355/A – Rear Corner Complete Left
Description:
- High-quality SSP panel for perfect fit
- Finished in silver weld-through primer for easy installation
- No need for additional prep time—just align, clamp, and weld
- Designed for seamless repair of left rear corner up to the gutter
This complete left rear corner panel is designed to offer a perfect fit and easy installation for your vehicle. Manufactured by SSP, it comes finished in silver weld-through primer, eliminating the need for additional prep work that is typically required with painted panels. Simply align, clamp, and weld for a smooth, efficient repair. Ideal for restoring the left rear corner up to the gutter, this top-quality panel ensures durability and a seamless repair process.
For 5/57-12/58 Busses
<!--StartFragment--><!--EndFragment-->Compatible Vehicles: - T2 Split Bus (1957,1958,1959)
Notes:From 04/1958 through to 12/1958. From chassis number 351736 to 421019. This panel has the light cut out in the higher factory position.
Additional Vehicle Info: T2 Split
211-813-355/B – Rear Corner Complete Left
Description:
- High-quality SSP panel for perfect fit and finish
- Silver weld-through primer for quick and easy installation
- Designed for Split Bus models (01/1959 to 06/1961)
- Includes light cut-out in the lower factory position
This complete left rear corner panel from SSP is designed for Split Bus models manufactured between 01/1959 and 06/1961 (chassis numbers 421020 to 802985). Finished in silver weld-through primer, it provides a flawless fit while eliminating the need for additional surface preparation before welding. Simply align, clamp, and weld for a seamless installation.
The panel features the light cut-out in the lower factory position, maintaining the authenticity and accuracy of your vehicle's restoration. Whether you're replacing a damaged section or restoring your Split Bus to its original condition, this top-quality panel offers both ease of installation and durability.
Compatible Vehicles: - T2 Split Bus (1959,1960,1961)
Notes:From 01/1959 through to 06/1961. From chassis number 421020 to 802985. This panel has the light cut out in the lower factory position.
Additional Vehicle Info: T2 Split
211-813-355/C – Rear Corner Complete Left
Description:
- Top-quality SSP panel for perfect fit and finish
- Finished in silver weld-through primer for easy installation
- Designed for Split Bus models (06/1961 to 07/1963)
- Includes oval light cut-out in factory position
This complete left rear corner panel is crafted by SSP for Split Bus models manufactured between 06/1961 and 07/1963 (chassis numbers 809286 to 1144281). The panel is finished in silver weld-through primer, eliminating the need for additional prep work, allowing for a quick and easy installation. Simply align, clamp, and weld for a seamless fit.
Designed to match the factory specifications, this panel features the oval light cut-out in the correct position, ensuring authenticity and precision. Whether you're restoring or repairing your Split Bus, this high-quality replacement part offers both ease of use and a perfect fit.
Compatible Vehicles: - T2 Split Bus (1962,1963)
Notes:From 06/1961 through to 07/1963. From chassis number 809286 to 1144281. This panel has the oval light cut out in the factory position.
Additional Vehicle Info: T2 Split
211-813-355/D – Rear Corner Repair Panel up to Swage Line, Left
Description:
- Precision-fit left rear corner panel for seamless repairs
- Welds securely in place, restoring original strength
- Covers up to the swage line, ensuring complete coverage
This left rear corner repair panel is designed for straightforward, professional-quality vehicle restorations. It fits precisely on the left rear section, providing a secure repair option that welds into place up to the swage line. Engineered for a smooth installation, it blends in seamlessly with the vehicle's original lines.
Ideal for body shops and DIY enthusiasts, this panel offers the strength and durability required for long-lasting repairs. it provides a perfect match to restore both the appearance and integrity of your vehicle.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)
Additional Vehicle Info: T2 Split
211-813-355/E – Rear Corner up to Swage Line Left
Description:
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - T2 Split Bus (1963,1964,1965,1966,1967)
Notes:Can be modified to fit Baywindow but doesn't have the dimple for the splash guard
Additional Vehicle Info: T2 Bay,T2 Split
211-813-355/F – Rear Corner Complete Left
Description:
Complete left rear corner up to gutter with no taillight cut out.
The panel is coated in silver weld through primer so there is no need for panel preparation before welding to the vehicle.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Notes:From March 1955 through to July 1963. This panel does not have the rear light cut out so can be used across this year range.
Additional Vehicle Info: T2 Split
211-813-355/G – Rear Corner Complete Left
Description:
- High-quality SSP panel for perfect fit and easy installation
- Finished in silver weld-through primer for quicker prep
- Designed to fit the left rear corner up to the gutter
- No need for additional prep—align, clamp, and weld
This Complete Left Rear Corner Panel is a top-quality SSP product, designed to fit the left rear corner of your VW up to the gutter. Manufactured for the best possible fit, it comes pre-finished in silver weld-through primer, eliminating the need for additional preparation work. Simply align the panel, clamp it into place, and weld—saving you valuable time during your restoration or repair project.
Perfect for restoring or repairing rusted or damaged corners, this panel offers a durable, factory-like finish with minimal effort. Whether you're working on a full restoration or tackling specific bodywork issues, this panel ensures both convenience and precision in your project.
Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966,1967)
Notes:From August 1963 through to 1967.
Additional Vehicle Info: T2 Split
211-813-355/XX – Rear Corner Repair Panel, Left or Right
Description:
Rear lower corner repair panel.
Not sided and will fit both left and right side corners.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-356/A – Rear Corner Complete Right
Description:
- High-quality SSP panel for perfect fit
- Finished in silver weld-through primer for easy installation
- No need for additional prep time—just align, clamp, and weld
- Designed for seamless repair of right rear corner up to the gutter
This complete right rear corner panel is designed to offer a perfect fit and easy installation for your vehicle. Manufactured by SSP, it comes finished in silver weld-through primer, eliminating the need for additional prep work that is typically required with painted panels. Simply align, clamp, and weld for a smooth, efficient repair. Ideal for restoring the right rear corner up to the gutter, this top-quality panel ensures durability and a seamless repair process.
Compatible Vehicles: - T2 Split Bus (1957,1958,1959)
Notes:From 04/1958 through to 12/1958. From chassis number 351736 to 421019. This panel has the light cut out in the higher factory position.
Additional Vehicle Info: T2 Split
211-813-356/B – Rear Corner Complete Right
Description:
- High-quality SSP panel for perfect fit and finish
- Silver weld-through primer for quick and easy installation
- Designed for Split Bus models (01/1959 to 06/1961)
- Includes light cut-out in the lower factory position
This complete right rear corner panel from SSP is designed for Split Bus models manufactured between 01/1959 and 06/1961 (chassis numbers 421020 to 802985). Finished in silver weld-through primer, it provides a flawless fit while eliminating the need for additional surface preparation before welding. Simply align, clamp, and weld for a seamless installation.
The panel features the light cut-out in the lower factory position, maintaining the authenticity and accuracy of your vehicle's restoration. Whether you're replacing a damaged section or restoring your Split Bus to its original condition, this top-quality panel offers both ease of installation and durability.
Compatible Vehicles: - T2 Split Bus (1959,1960,1961)
Notes:From 01/1959 through to 06/1961. From chassis number 421020 to 802985. This panel has the light cut out in the lower factory position.
Additional Vehicle Info: T2 Split
211-813-356/C – Rear Corner Complete Right
Description:
- Top-quality SSP panel for perfect fit and finish
- Finished in silver weld-through primer for easy installation
- Designed for Split Bus models (06/1961 to 07/1963)
- Includes oval light cut-out in factory position
This complete right rear corner panel is crafted by SSP for Split Bus models manufactured between 06/1961 and 07/1963 (chassis numbers 809286 to 1144281). The panel is finished in silver weld-through primer, eliminating the need for additional prep work, allowing for a quick and easy installation. Simply align, clamp, and weld for a seamless fit.
Designed to match the factory specifications, this panel features the oval light cut-out in the correct position, ensuring authenticity and precision. Whether you're restoring or repairing your Split Bus, this high-quality replacement part offers both ease of use and a perfect fit.
Compatible Vehicles: - T2 Split Bus (1962,1963)
Notes:From 06/1961 through to 07/1963. From chassis number 809286 to 1144281. This panel has the oval light cut out in the factory position.
Additional Vehicle Info: T2 Split
211-813-356/D – Rear Corner Repair Panel up to Swage Line, Right
Description:
- Precision-fit right rear corner panel for seamless repairs
- Welds securely in place, restoring original strength
- Covers up to the swage line, ensuring complete coverage
This right rear corner repair panel is designed for straightforward, professional-quality vehicle restorations. It fits precisely on the right rear section, providing a secure repair option that welds into place up to the swage line. Engineered for a smooth installation, it blends in seamlessly with the vehicle's original lines.
Ideal for body shops and DIY enthusiasts, this panel offers the strength and durability required for long-lasting repairs. it provides a perfect match to restore both the appearance and integrity of your vehicle.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)
Additional Vehicle Info: T2 Split
211-813-356/E – Rear Corner up to Swage Line Right
Description:
- Fits right side from rear corner to swage line
- Top-quality panel, produced by Wolfsburg West
- Can be modified for Bay Window fitment
This high-quality rear corner panel is designed for the right side of the T2 Split from the rear corner to the swage line. Produced by Wolfsburg West, ensuring excellent craftsmanship and durability. While it is made to fit the T2 Split, it can also be modified to suit Bay Window models but doesn't have the dimple for the splash guard, offering flexibility for restoration projects.
Providing a clean, accurate replacement for your bus's rear corner. With its top-tier construction, this panel is ideal for anyone looking to restore or repair their vehicle with a reliable, long-lasting part.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - T2 Split Bus (1963,1964,1965,1966,1967)
Notes:Can be modified to fit Baywindow but doesn't have the dimple for the splash guard.
Additional Vehicle Info: T2 Bay,T2 Split
211-813-356/F – Rear Corner Complete Right
Description:
Complete right rear corner up to gutter with no taillight cut out.
The panel is coated in silver weld through primer so there is no need for panel preparation before welding to the vehicle.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Notes:From March 1955 through to July 1963. This panel does not have the rear light cut out so can be used across this year range.
Additional Vehicle Info: T2 Split
211-813-356/G – Rear Corner Complete Right
Description:
- High-quality SSP panel for perfect fit and easy installation
- Finished in silver weld-through primer for quicker prep
- Designed to fit the left rear corner up to the gutter
- No need for additional prep—align, clamp, and weld
This Complete Left Rear Corner Panel is a top-quality SSP product, designed to fit the left rear corner of your VW up to the gutter. Manufactured for the best possible fit, it comes pre-finished in silver weld-through primer, eliminating the need for additional preparation work. Simply align the panel, clamp it into place, and weld—saving you valuable time during your restoration or repair project.
Perfect for restoring or repairing rusted or damaged corners, this panel offers a durable, factory-like finish with minimal effort. Whether you're working on a full restoration or tackling specific bodywork issues, this panel ensures both convenience and precision in your project.
Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966,1967)
Notes:From August 1963 through to 1967.
Additional Vehicle Info: T2 Split
211-813-356/X – Left or Right Hand Rear Corner Repair
Description:
Rear lower corner repair Left or Right.
Compatible Vehicles: - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-357/B – Lower Rear Corner Repair Panel, Left
Description:
- Ideal for rust or accident damage repairs
- Cost-effective solution for a full corner panel replacement
- Perfect for budget rebuilds and restorations
Address common rust or rear-end damage with our lower rear corner repair panel for the left side. This part offers a practical solution for fixing damaged or rusted areas without the need to replace the entire corner panel. As a reproduction-labelled part, it’s designed for budget-friendly rebuilds and restorations.
This repair section is crafted to seamlessly fit and restore the affected area, providing a cost-effective way to achieve a high-quality repair. Its design ensures a precise fit, making it an excellent choice for maintaining your vehicle’s appearance and structural integrity.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-357/R – Lower Rear Corner Repair Panel, Left
Description:
- Ideal for rust or accident damage repairs
- Cost-effective solution for a full corner panel replacement
- Perfect for budget rebuilds and restorations
Address common rust or rear-end damage with our lower rear corner repair panel for the left side. This part offers a practical solution for fixing damaged or rusted areas without the need to replace the entire corner panel. As a reproduction-labelled part, it’s designed for budget-friendly rebuilds and restorations.
This repair section is crafted to seamlessly fit and restore the affected area, providing a cost-effective way to achieve a high-quality repair. Its design ensures a precise fit, making it an excellent choice for maintaining your vehicle’s appearance and structural integrity.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-358/B – Lower Rear Corner Repair Panel, Right
Description:
- Ideal for rust or accident damage repairs
- Cost-effective solution for a full corner panel replacement
- Perfect for budget rebuilds and restorations
Address common rust or rear-end damage with our lower rear corner repair panel for the right side. This part offers a practical solution for fixing damaged or rusted areas without the need to replace the entire corner panel. As a reproduction-labelled part, it’s designed for budget-friendly rebuilds and restorations.
This repair section is crafted to seamlessly fit and restore the affected area, providing a cost-effective way to achieve a high-quality repair. Its design ensures a precise fit, making it an excellent choice for maintaining your vehicle’s appearance and structural integrity.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-358/R – Lower Rear Corner Repair Panel, Right
Description:
- Ideal for rust or accident damage repairs
- Cost-effective solution for a full corner panel replacement
- Perfect for budget rebuilds and restorations
Address common rust or rear-end damage with our lower rear corner repair panel for the right side. This part offers a practical solution for fixing damaged or rusted areas without the need to replace the entire corner panel. As a reproduction-labelled part, it’s designed for budget-friendly rebuilds and restorations.
This repair section is crafted to seamlessly fit and restore the affected area, providing a cost-effective way to achieve a high-quality repair. Its design ensures a precise fit, making it an excellent choice for maintaining your vehicle’s appearance and structural integrity.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-363/A – Rear Arch Closing Panel, Left
Description:
Rear arch closing panel, left hand fitment
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - Baywindow USA (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-364/A – Rear Arch Closing Panel, Right
Description:
Rear arch closing panel, right hand fitment
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - Baywindow USA (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-813-395 – Plug for Rear Valance
Description:
- Correct replacement for 72-79 Bay Window bellow rear light area
- Plug for Rear Valance
- Sold individually, with 2 required per car
This small white plastic rear corner bung is designed for Bay Window VW models from 1972 to 1979, fitting below the rear lights. While many vehicles have had these holes filled or repaired, this plug is perfect for those aiming for a true, original restoration.
Sold individually, you’ll need two per vehicle to complete the restoration. These plugs are the correct part to ensure authenticity and maintain the vehicle’s classic look.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Notes:For the rust proofing access hole into the rear chassis. Also fits rear cross members on T25 pick up.
Additional Vehicle Info: T2 Bay
211-813-417/RS – Engine Lid Treasure Chest Door Seal Retaining Strip
Description:
Engine lid treasure chest door seal retaining strip.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
211-813-421/D – D Pillar Repair Inner Left
Description:
D pillar repair, inner panel, left hand side.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-813-421/F – D Pillar Repair to Swage Line Inner Left
Description:
D pillar repair, inner panel, left hand side.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-813-421/G – D-Pillar Complete Left
Description:
D-Pillar is next to the tailgate and engine lid.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-421/H – D-Pillar Complete Left
Description:
D-Pillar is next to the tailgate and engine lid.
This panel is for Splits with the narrow tailgate
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-813-421/N – D-Pillar Lower Repair Section Left
Description:
D-pillar lower repair section including engine lid seal channel to fit the left hand side.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-813-422/D – D Pillar Repair Inner Right
Description:
D pillar repair, inner panel, right hand side.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-813-422/G – D-Pillar Complete Right
Description:
D-Pillar is next to the tailgate and engine lid.
This panel is for Splits with the wide tailgate.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-813-422/H – D-Pillar Complete Right
Description:
D-Pillar is next to the tailgate and engine lid.
This panel is for Splits with the narrow tailgate
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-813-422/N – D-Pillar Lower Repair Section Right
Description:
D-pillar lower repair section including engine lid seal channel to fit the right hand side.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-000 – Fresh Air Vent Stainless Steel Screw Kit
Description:
Screw set including washers to secure the cover, rear grill and side flaps.
Compatible Vehicles: - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-817-001 – Pop-Top Roof Seal,For Dormobile, Viking and Devon Conversions
Description:
- Perfect fit for Dormobile, Viking, or Devon pop-top roofs
- Sold by the meter, measure your roof before ordering
- High-quality seal for preventing leaks and ensuring a tight fit
This pop top roof seal is designed specifically for vehicles with Dormobile, Viking, or Devon roof conversions. Made from durable, high-quality material, it helps to create a tight, weatherproof seal, preventing leaks and keeping the interior dry.
Sold by the meter, it’s important to measure your roof carefully to ensure you order the correct amount for your needs. Ideal for replacing old, worn-out seals, this product will restore the integrity of your pop-top roof, keeping your vehicle protected from the elements.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-002 – Westfalia Bottom Edge Roof Seal
Description:
Pop top roof seal. This seal fits Westfalia roofs at the bottom edge. It is sold as an 8 meter length
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-002/A – Westfalia Bottom Edge Roof Seal
Description:
Pop top roof seal. This seal fits Westfalia roofs at the bottom edge. Supplied as a 7 metre length
Use 7 Meters for Baywindow
If you have a leaky pop top roof then save getting wet in the night whilst sleeping and replace the seals on your pop top. The last thing you want is your roof leaking and letting in water that can accelerate the rust process
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-003 – Pop-Top Roof Seal for Devon Roof
Description:
Pop top roof seal. This seal fits Devon roofs. It fits the static roof to elevating section. It is supplied in a 9 metre length which is required on most vans.
If your Devon roof has developed a leak then its best to fix it straight away to prevent further damage. This seals is the bottom rubber that fits to the lower skirt of the roof.
If you have a leaky pop top roof then save getting wet in the night whilst sleeping and replace the seals on your pop top. The last thing you want is your roof leaking and letting in water that can accelerate the rust process
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-004 – Edging Trim for Pop-Tops Doors and Windows
Description:
- Flexible trim sold by the metre
- Ideal for pop-tops, doors, and windows
- Order multiples for longer continuous lengths
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Rabbit (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983,1984) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)
Additional Vehicle Info: Caddy,Golf Mk1,Jetta,Scirocco,Transporter T4,Transporter T5,T25,T2 Bay,Type 3
211-817-004/50 – Edging Trim for Pop-Tops Doors and Windows 50m Roll
Description:
Edging trim. Supplied in 50 meter rolls
Applications:
Westfalia and Devon pop tops.
Mk1 Golf, Jetta, Scirocco, and Caddy - Inner door seal beading.
T4, T5 & T6 - Finishing trim for when side panels have been cut out for windows.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Rabbit (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983,1984) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)
Additional Vehicle Info: Caddy,Golf Mk1,Jetta,Scirocco,Transporter T4,T25,T2 Bay,Type 3
211-817-005 – Pop-Top Roof Seal for Devon Roof
Description:
Pop top roof seal with a J profile. This seal fits Devon roofs. One seal is required per vehicle.
If you have a leaky pop top roof then save getting wet in the night whilst sleeping and replace the seals on your pop top. The last thing you want is your roof leaking and letting in water that can accelerate the rust process
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-006 – Pop-Top Roof Seal for Devon Roof
Description:
Seal to fit the fibreglass skirt to aluminium centre part of a Devon pop top roof. Supplied per metre.
If you have a leaky pop top roof then save getting wet in the night whilst sleeping and replace the seals on your pop top. The last thing you want is your roof leaking and letting in water that can accelerate the rust process
We recommend x8 meters to complete 1 roof.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-007 – Dormobile Roof Window Seal, Each
Description:
Dormobile roof window seal. Sold per window in a 2.5 meter length.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-008 – Dormobile Roof Skylight Seal, Each
Description:
Dormobile roof skylight seal. Sold per skylight in a 2 meter length.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-009 – Westfalia Pop-Top Roof Seal Static to Elevating Section
Description:
Pop top roof seal. This is a Westfalia roof seal. It is for the static to elevating section. It is supplied as a 2 meter length
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-021 – Skylight, For Dormobile Roof Conversions
Description:
Replacement skylight for vehicles with a Dormobile roof conversion.
Finished in an opaque white finish and is UV stable.
The external part measures 535x315mm
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-022 – Roof Skylight for Devon Roof
Description:
Skylight for Devon roof. It is finished in white and UV stable.
It measures 470x470mm
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-817-024 – Skylight, Fiamma, 39x39, white with flyscreen
Description:
Fiamma Vent 40 rooflight in white with flyscreen.
Fiamma's range Vent 40 rooflight offers high quality and durability. Thanks to its elegant external aerodynamic profile top, it does not require the use of a Spoiler. During high-speed testing, noise and vibrations were greatly reduced. The outer cover and exclusive patented rubber seal, guarantee a watertight system and ensures that rain is displaced. ABE approved. Made with high quality UV-ray resistant materials.
Interchangeable with the old 40x40cm Fiamma Roof-lights and with rooflights from 36x36cm to 42x42cm thanks to the reinforced frame.
Supplied with permanent air flow ventilation and mosquito screen. It changes and refreshes the air inside your vehicle within seconds. The transparent grating permits maximum air circulation and filters light.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - T5 (2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Additional Vehicle Info: Transporter T4,Transporter T5,T25,T2 Bay,T2 Split
211-817-031/B/F – Front Roof Section
Description:
**COLLECTION ONLY**
Front roof section.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:For Splitscreen models from 1955 to 1967.
Additional Vehicle Info: T2 Split
Replies have been locked on this page!