Fitment #110

616-100-184-03 – Cylinder Head Gasket Set

Description:

Engine cylinder head gasket set.

To fit:
912 01/1965-02/1970
356 A/B/C 01/1950-12/1965

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-100-906-01 – Float for Carburettor, Solex 40 PII-4 and 44 PII-4

Description:

Manufactured to OE standards
High quality materials

To fit:

356 B, C 1.6 01/1959-12/1965

912 1.6 01/1965-07/1968

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 356,912

616-100-927-01 – Carburettor Adjusting Screw with Spring, Solex 40 & 44 PII-4

Description:

Used to adjust the idle speed on the carburettor
Kit includes 1x screw and 1x spring
Suitable for Solex 40 PII-4 and 44 PII-4 carburettors

To fit:

356 B, C 1.6 01/1959-12/1965

912 1.6 01/1965-07/1968

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 356,912

616-101-123-00 – Oil Cooler Seal

Description:

Oil cooler seal, 2 required per vehicle.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-101-380-00 – Oil Sump Strainer

Description:

Oil sump strainer with 16mm hole.

To fit:
356 1950-1965 all models
912 1.6 1965-1969

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-101-901-01 – Engine Crankcase Gasket Set

Description:

Engine crankcase gasket set, includes all of the sealing rings, washers, and gaskets needed to rebuild your crankcase.

To fit:
912 1.6 1965-1969
356 1.5-1.6 1950-1965

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-102-025-01 – Flywheel Gland Nut & Washer, Chromoly

Description:

36mm flywheel gland nut and washer, made from super strong chromoly steel. Includes OEM style pilot shaft bearing for long life.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-104-301-03 – Cylinder Head 912 for 38x34mm Valves, Bare with Seats & Guides

Description:

Brand new Porsche 912 stock head with valve guides and seats, supplied each.

This casting is set up as an exact copy of the stock head with standard plugs, and accepts standard size 38mm intake and 34mm exhaust valves. Intake valve guides have slot for seal, no seal is required on exhaust valve guides.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-104-301-03/AA – Cylinder Head 912 Complete with 38x34mm Valves

Description:

Brand-new stock replacement head
Includes valves, springs & seals
Precision 3-angle valve seats

This Porsche 912 stock head is a perfect replacement for your classic Porsche engine. It comes fully assembled with 38mm intake and 34mm exhaust valves, plus a precision 3-angle valve job for optimal performance. Built with new AA springs, retainers, keepers, and seals, this head ensures durability and reliability.

Designed as an exact replica of the original, it features 14mm 1/2-inch plugs, making it a seamless stock replacement. Whether you need to replace just one head or restore your engine to factory specs, this high-quality component delivers OEM fit and function. Sold individually.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-104-381-01 – Cylinder Head Nut, Large Head

Description:

Cylinder head nut, large head type. 6 required per engine.

To fit:
356 B, C 1960-1965
912 1965-1969

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-104-383-00 – Cylinder Head Nut, Small Head

Description:

Cylinder head nut, small head type. 2 required per engine.

To fit:
356 B, C 1960-1965
912 1965-1969

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-104-951-00 – Rocker Cover Gasket

Description:

Rocker cover gasket (rubber/cork mixture). 2 required per vehicle.

To fit:
356 1950-1965
912 1965-1969

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-104-951-00/HD – Rocker Cover Gasket, Heavy Duty, Pair

Description:

Heavy duty rocker cover gasket set. Improved design of cork/rubber composite with a steel core. No adhesive required when fitting.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-105-402-00 – Inlet Valve, 38x10mm

Description:

Fits Porsche 356 and 912 engines
Durable 38x10mm standard replacement
Built to OEM quality standards

This high-quality inlet valve is a direct-fit replacement for Porsche 356 and 912 engines. Precision-engineered to 38x10mm dimensions, it ensures reliable performance and long service life under demanding conditions. Ideal for restoring engine efficiency and maintaining factory specifications.

Manufactured to meet or exceed OEM standards, this valve offers excellent heat resistance and durability. Whether you're rebuilding or maintaining your classic engine, it's a dependable choice for consistent inlet flow and optimal combustion.

To fit:

356 C/SC 1964-1965 engine 616/15, 616/16

912 1965-1969

Compatible Vehicles: - 356 (1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-105-406-50 – Exhaust Valve, 34x10mm

Description:

Fits Porsche 356 and 912 engines
Durable 34x10mm standard replacement
Built to OEM quality standards

This high-quality exhaust valve is a direct-fit replacement for Porsche 356 and 912 engines. Precision-engineered to 34x10mm dimensions, it ensures reliable performance and long service life under demanding conditions. Ideal for restoring engine efficiency and maintaining factory specifications.

To fit:

356 C/SC 1964-1965 engine 616/15, 616/16

912 1965-1969

Compatible Vehicles: - 356 (1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-105-491-02 – Valve Stem Seal

Description:

Valve stem seal. Used on the inlet valves only.
Sold in singles.

To fit:
356 1950-1965
912 1965-1969

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-107-015-02 – Oil Pump Gear with Tachometer Drive, Lower

Description:

Manufactured to OE standards
High quality materials

To fit:

356 B/C 1.6 01/1959-12/1965

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

616-107-016-01 – Oil Pump Gear, Upper

Description:

Manufactured to OE standards
High quality materials

To fit:

356 B/C 1.6 01/1959-12/1965

912 1.6 1965-1969

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-107-017-01 – Oil Pump Gear without Tachometer Drive, Lower

Description:

Manufactured to OE standards
High quality materials

To fit:

356 B/C 1.6 01/1959-12/1965

912 1.6 1965-1969

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-107-079-00 – Oil Filler and Breather

Description:

Steel construction
Black OE looking painted finish
Manufactured to OE standards

This oil filler tank for the Porsche 356 B T6 and C models is made from steel and finished in black paint. It also serves as a breather mechanism to help relieve internal engine pressure, which can reduce oil leaks and support consistent engine performance.

Compatible Vehicles: - 356 (1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

616-107-079-00/SS – Oil Filler and Breather, Stainless Steel

Description:

Stainless steel for durability
Black OE looking painted finish
Manufactured to OE standards

This oil filler tank for the Porsche 356 B T6 and C models is made from stainless steel and finished in black paint. It also serves as a breather mechanism to help relieve internal engine pressure, which can reduce oil leaks and support consistent engine performance.

Compatible Vehicles: - 356 (1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

616-107-079-03 – Oil Filler and Breather

Description:

Steel construction
Black OE looking painted finish
Manufactured to OE standards

This oil filler tank for the Porsche 912 is made from steel and finished in black paint. It also serves as a breather mechanism to help relieve internal engine pressure, which can reduce oil leaks and support consistent engine performance.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-107-079-03/SS – Oil Filler and Breather, Stainless Steel

Description:

Stainless steel for durability
Black OE looking painted finish
Manufactured to OE standards

This oil filler tank for the Porsche 912 is made from stainless steel and finished in black paint. It also serves as a breather mechanism to help relieve internal engine pressure, which can reduce oil leaks and support consistent engine performance.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-107-792-01 – Gasket, Oil Filler and Breather

Description:

Located at the base of the oil bleeder/breather
German OE quality

To fit:

356 B T6 1960-1963 with European heater systems

356 C 1964-1965

912 1965-1969

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-107-902-01 – Oil Pump Cover Gasket

Description:

Manufactured to OE standards
High quality materials

To fit:

356 B/C 1.6 01/1959-12/1965

912 1.6 1965-1969

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-108-401-00 – Fuel Pump, Late Version, Pierburg Style

Description:

Supplied with gasket
Manufactured to OE standards
Ensures consistent power

A failing mechanical fuel pump can lead to various issues such as difficulty starting, engine sputtering, power loss, and even stalling or surging. This late version Pierburg style mechanical fuel pump, supplied with a gasket, is designed to prevent these problems, ensuring your engine runs smoothly and efficiently.

To fit:

356 B T5 T6 1.6 1959-1963

356 C 1.6 1964-1965

912 1.6 1965-1969

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-108-902-03 – Gasket Set for Carburetor, Solex 40 PII-4

Description:

Suitable for Solex 40PII-4 with split shaft
One kit required per carburettor

To fit:

356 B, C 1.6 01/1959-12/1965

912 1.6 01/1965-07/1968

Compatible Vehicles: - 356 (1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 356,912

616-108-932-00 – Air Filter

Description:

Air filter element, 2 required per vehicle.

To fit:
912 1965-1969

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-109-952-00 – Ignition HT Lead Set

Description:

Strong, consistent spark for better performance
Reduces misfires and improves fuel economy
100% made in Germany to OE standards

Upgrade your engine's performance with this premium Ignition HT Lead Set. Designed to deliver a strong and consistent spark, these high-quality copper cables help reduce misfires and enhance fuel efficiency. Manufactured in Germany to meet OE standards, they ensure reliability and durability for long-lasting performance.

Perfect as a replacement for standard ignition leads, this set offers superior conductivity and improved ignition timing. Whether you're maintaining your vehicle or upgrading components, these leads provide a seamless fit and enhanced engine efficiency.

To fit:

356 A, B, C 1956-1965

912 1.6 1965-1969

914 2.0 1973-1976

Compatible Vehicles: - 356 (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969) - 914 (1973,1974,1975,1976)

Additional Vehicle Info: 356,912,914

616-111-007-00 – Exhaust Tail Pipe Kit

Description:

Exhaust tail pipe kit with clamps.

Painted aluminized mild steel.

To fit:
356 B/C 1960-1965 ''New version''

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

616-111-010-05 – Exhaust Rear Silencer

Description:

Standard replacement exhaust rear silencer.

Painted aluminized mild steel (heat resistant paint).

To fit:
356 B T5 09/1959-12/1961 Europe
356 B/C 01/1959-12/1965 export USA
912 1965-1969 export USA

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-111-010-05/SS – Exhaust Rear Silencer, Stainless Steel

Description:

Standard replacement exhaust rear silencer.

Stainless steel 304/4301 with glas-blown matt surface.

To fit:
356 B T5 09/1959-12/1961 Europe
356 B/C 01/1959-12/1965 export USA
912 1965-1969 export USA

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-111-016-05 – Exhaust Rear Silencer

Description:

Standard replacement exhaust rear silencer.

Painted aluminized mild steel (heat resistant paint).

To fit:
356 B T6 09/1961-12/1963 Europe
356 C 01/1963-12/1965 Europe
912 1965-1969 Europe

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-111-291-00 – Exhaust Gasket

Description:

Exhaust gasket, heat exchanger or rear silencer to cylinder head. Supplied in singles, 4 required.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

616-111-298-00 – Exhaust Tail Pipe Kit

Description:

Exhaust tail pipe kit with clamps.

Painted aluminized mild steel.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-111-298-00/SS – Exhaust Tail Pipe Kit, Stainless Steel

Description:

Exhaust tail pipe kit with clamps.

Stainless steel.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-116-019-00 – Clutch Pressure Plate

Description:

Clutch pressure plate, 200mm.

To fit:
912 1.6 1965-1969

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-116-912-00 – Clutch Kit

Description:

Complete kit: plate, pressure plate, bearing
Sachs OEM quality with 2 year warranty
Ensures smooth, reliable performance

This 200mm clutch kit, manufactured by Sachs, includes everything you need for a complete clutch replacement. The kit comes with a pressure plate, clutch plate, release bearing and special grease for assembly, ensuring all critical components are covered.

Designed for durability and precision, this Sachs clutch kit delivers reliable performance and smooth operation. Whether you're upgrading or replacing a worn-out clutch, trust this high-quality kit to restore your vehicle's driving experience to optimal levels.

To fit:

912 1.6 1965-1969

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-211-003-01 – Heat Exchanger, Left

Description:

Heat exchanger, left.

To fit:
912 1965-1969 export USA

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-211-004-01 – Heat Exchanger, Right

Description:

Heat exchanger, right.

To fit:
912 1965-1969 export USA

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

616-602-108-99 – Ignition Coil Clamp, Bosch Coil Style

Description:

Bracket for ignition coil (Bosch coil style), zinc galvanised.

To fit:
356 A, B, C 1955-1965
911 1965-1968
912 1965-1968
914-4 1970-1976

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 356,911,912,914

616-602-221-05 – Rotor Arm

Description:

Delivers precise spark timing
Built for heat and wear resistance
Manufactured to OE standards

This rotor arm ensures efficient ignition timing by delivering high-voltage current from the distributor to the spark plugs. Made from durable, heat-resistant materials, it offers reliable performance and long service life. Ideal for routine maintenance or replacement, it’s compatible with the vehicle models below.

To fit:

356 1950-1965

912 1965-1969

912 E 1976

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968,1969,1976)

Additional Vehicle Info: 356,911,912

616-602-226-02 – Contact Breaker Points, for BOSCH Distributors

Description:

Contact breaker points for Bosch distributors.

To fit:
911 1968-1971
912 1965-1969
912 E 1976
924 2.0 1976-1979
914 1970-1976
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979)

Additional Vehicle Info: 911,912,912E,914,924

616-602-226-03 – Contact Breaker Points, 2 Piece

Description:

Contact breaker points, 2 piece type.

To fit:
356 1950-1965
911 1965-1969

This part number supersedes older part numbers:
61660222600, 61660222601

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,911

616-602-227-00 – Condenser for Distributor

Description:

Ignition condenser for BOSCH distributors.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968)

Additional Vehicle Info: 356,911

616-602-907-01 – Condenser for Aluminium Distributor

Description:

Ignition condenser for die cast aluminium distributor with vacuum advance.

Compatible Vehicles: - 912 (1968,1969)

Additional Vehicle Info: 912

616-604-102-00/HD – SSP High Torque Starter Motor 6 Volt

Description:

High torque starter motor for 356 6v models.

Strong, powerful, offset gear-reduced starter motor, delivering huge cranking torque through a set of steel internal gears. Lightweight, compact and durable this unit starts the engine faster with immense power, whilst drawing less current from the battery.

3 year/20,000 mile warranty included as standard. Assembled in the UK.

To fit:
356 1950-1965 6v

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

616-604-102-02/HD – SSP High Torque Starter Motor

Description:

High torque starter motor for 356 12v models.

Strong, powerful, offset gear-reduced starter motor, delivering huge cranking torque through a set of steel internal gears. Lightweight, compact and durable this unit starts the engine faster with immense power, whilst drawing less current from the battery.

3 year/20,000 mile warranty included as standard. Assembled in the UK.

To fit:
356 1960-1965 12v

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

622047 – Gasket

Description: GASKET

Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002)

Additional Vehicle Info: Defender 1983-2016

622538 – Sleeve Mainshaft Lt95 Gearbox

Description:

SLEEVE MAINSHAFT LT95 GEARBOX

Fits:-

Defender V8
Range Rover Classic
101 Forward Control

Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002) - Range Rover Classic (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: Defender 1983-2016,Range Rover Classic 1971-1994

6397 – Bearing

Description: NEEDLE ROLLER BEARING REAR PINION

Needle Roller Bearing for rear of Primary Pinion (1st Motion shaft)

Fits+-

LT76 4 Speed Gearbox Series 2 & 3
LT85 5 Speed Geabox

6397

Compatible Vehicles: - Defender (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016) - Series 1,2,3 (1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)

Additional Vehicle Info: Defender 1983-2016,Series 1,2,3

644-201-001-07/OE – Fuel Tank, 52 Litre, OE Grey Painted

Description:

OE-style tank with original details
Fits 356 B T6 and C models
Top-mounted fuel gauge sender

This 52-litre fuel tank is designed for Porsche 356 B T6 and C models. Painted grey and manufactured to OE standards, it features all original stamped impressions, welds, and brackets. The fuel gauge sender is positioned at the top, ensuring compatibility and authenticity for classic restorations.

Compatible Vehicles: - 356 (1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-201-801-06 – Fuel Gauge Sender Unit, Bottom Mounted

Description:

For fuel tank with bottom mounted sender
Gasket included

To fit:

356 B T6 1.6 08/1961-12/1963

Compatible Vehicles: - 356 (1961,1962,1963)

Additional Vehicle Info: 356

644-211-003-00 – Heat Exchanger, Left

Description:

Manufactured to OE standards
High quality materials
Made of steel with heat resistant black paint

To fit:

356 A 1.5-1.6 01/1955-12/1961

356 B T5 Europe 1.6 01/1959-08/1961

356 B/C export - USA 1.6 01/1959-12/1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-211-004-00 – Heat Exchanger, Right

Description:

Manufactured to OE standards
High quality materials
Made of steel with heat resistant black paint

To fit:

356 A 1.5-1.6 01/1955-12/1961

356 B T5 Europe 1.6 01/1959-08/1961

356 B/C export - USA 1.6 01/1959-12/1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-211-021-00 – Heater Control Box, Left

Description:

Manufactured to OE standards
High quality materials
Made of steel with heat resistant black paint

To fit:

356 A 1.5, 1.6 1955-1961

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-211-022-00 – Heater Control Box, Right

Description:

Manufactured to OE standards
High quality materials
Made of steel with heat resistant black paint

To fit:

356 A 1.5, 1.6 1955-1961

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-211-025-05 – Heater Control Box, Left

Description:

Manufactured to OE standards
High quality materials
Made of steel with heat resistant black paint

To fit:

356 B 1.6 1959-1962

Compatible Vehicles: - 356 (1959,1960,1961,1962)

Additional Vehicle Info: 356

644-211-026-05 – Heater Control Box, Right

Description:

Manufactured to OE standards
High quality materials
Made of steel with heat resistant black paint

To fit:

356 B 1.6 1959-1962

Compatible Vehicles: - 356 (1959,1960,1961,1962)

Additional Vehicle Info: 356

644-333-131-00 – Rubber Sleeve Rear Torsion Bar Inner

Description:

Rear torsion bar inner rubber sleeve.

Outer diameter 69mm

Inner diameter 48mm

Thickness 31mm

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967) - 912 (1965,1966,1967)

Additional Vehicle Info: 356,911,912

644-341-007-00 – Treuhaft Front Steering Knuckle/Stub Axle, Left

Description:

EMPI’s exclusive Treuhaft Porsche 356 spindle assembly is produced with 100% new forgings based on CAD modeling from original Porsche samples. Long since discontinued by Porsche these pre-loaded spindle and support bow assemblies are precision assembled on EMPI's own CNC jigs to exacting tolerances. They will return any 356 suspension to like new condition and enhance steering response.

Left & right spindles sold separately.

To fit:
356B 01/1959-12/1963

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963)

Additional Vehicle Info: 356

644-341-008-00 – Treuhaft Front Steering Knuckle/Stub Axle, Right

Description:

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963)

Additional Vehicle Info: 356

644-347-803-05 – Horn Button Backing Plate

Description:

Fits Porsche 356 B and C models
Supports horn button
Durable and easy to fit

This precision-made backing plate is designed specifically for Porsche 356 B and C models. It provides a secure and reliable mounting surface for the horn button, ensuring proper fit and function in classic restorations or repairs.

Compatible Vehicles: - 356 (1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-352-513-01 – Brake Wheel Cylinder, Rear

Description:

Manufactured to OE standards
High quality materials
Fits left or right

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: 356

644-501-017-00 – Inner Rocker Panel, Left, without jack support

Description:

Inner rocker panel, left, without jack support.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-018-00 – Inner Rocker Panel, Right, without jack support

Description:

Inner rocker panel, right, without jack support.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-033-05 – Battery Box Side with Bumper Bracket, Left

Description:

Battery box side with bumper bracket, left.

Compatible Vehicles: - 356 (1959,1960,1961)

Additional Vehicle Info: 356

644-501-034-05 – Battery Box Side with Bumper Bracket, Right

Description: Battery box side with bumper bracket, right.

Compatible Vehicles: - 356 (1959,1960,1961)

Additional Vehicle Info: 356

644-501-037-05 – Battery Floor Section with Centre Bracket

Description:

Battery floor section with centre bracket.

To fit:
356 B T5 1.6 01/1959-08/1961

Compatible Vehicles: - 356 (1959,1960,1961)

Additional Vehicle Info: 356

644-501-037-06 – Battery Floor Section with Bracket

Description:

Battery floor section with bracket.

To fit:
356 B T6 1961-07/1963
356 C 1963-1965

Compatible Vehicles: - 356 (1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-041-05 – Pedal Floor Board

Description: Pedal floor board.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-045-00 – Jack Receiver Bracket

Description:

Jack receiver bracket.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-501-052-00 – Floor Pan, Front, Without Mounts

Description: Floor pan, front, without mounts.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-053-00 – Floor Pan, Rear, Without Mounts

Description: Floor pan, rear, without mounts.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-150-00 – Jack Receiver Bracket

Description:

Jack receiver bracket.

Compatible Vehicles: - 356 (1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-221-00 – Front Inner Wheel Well Closing Panel, Left

Description:

Front inner wheel well closing panel/door cell repair panel, left.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-501-261-06 – Reinforcement for Side Member, Right Front, Left Rear

Description:

Reinforcement for side member, right front, left rear.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-501-262-06 – Reinforcement for Side Member, Left Front, Right Rear

Description: Reinforcement for side member, left front, right rear.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-501-441-06 – Cross Member, Front

Description: Cross member, front.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-502-017-00 – Wing Closing Panel, Front, 4 Rib Version, Left

Description: Wing closing panel, front, 4 rib version, left.

Compatible Vehicles: - 356 (1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-502-018-00 – Wing Closing Panel, Front, 4 Rib Version, Right

Description:

Wing closing panel, front, 4 rib version, right.

Compatible Vehicles: - 356 (1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-502-041-10 – Door Lock Striker Panel / B Pillar, Left

Description:

Door lock striker panel / B pillar for 3 hole striker plate, left.

To fit:
356 B T5 Coupe 1.6 01/1959-06/1961

Compatible Vehicles: - 356 (1959,1960,1961)

Additional Vehicle Info: 356

644-502-041-30 – Door Lock Striker Panel / B Pillar, Left

Description:

Door lock striker panel / B pillar for 3 hole striker plate, left.

To fit:
356 B T6 Coupe 1.6 09/1961-12/1963
356 C Coupe 1.6 01/1963-12/1965

Compatible Vehicles: - 356 (1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-502-042-10 – Door Lock Striker Panel / B Pillar, Right

Description:

Door lock striker panel / B pillar for 3 hole striker plate, right.

To fit:
356 B T5 Coupe 1.6 01/1959-06/1961

Compatible Vehicles: - 356 (1959,1960,1961)

Additional Vehicle Info: 356

644-502-042-30 – Door Lock Striker Panel / B Pillar, Right

Description:

Door lock striker panel / B pillar for 3 hole striker plate, right.

To fit:
356 B T6 Coupe 1.6 09/1961-12/1963
356 C Coupe 1.6 01/1963-12/1965

Compatible Vehicles: - 356 (1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-502-101-05 – Front Compartment Interior Panel, Karmann Design

Description: Front compartment interior panel, Karmann design.

Compatible Vehicles: - 356 (1950,1955,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-503-041-00 – Door Sill Outer Panel, Left

Description:

Door sill outer panel, left. Painted steel.

To fit:
356 A/B/C 1.5-1.6 01/1955-12/1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-503-042-00 – Door Sill Outer Panel, Right

Description:

Door sill outer panel, left. Painted steel.

To fit:
356 A/B/C 1.5-1.6 01/1955-12/1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-504-971-00/BL – Leather Strap for Spare Wheel, Black

Description:

Secures the spare wheel in the boot area
Genuine leather for lasting quality

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-504-971-00/BR – Leather Strap for Spare Wheel, Brown

Description:

Secures the spare wheel in the boot area
Genuine leather for lasting quality

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-505-011-00 – Front Bumper, Complete

Description:

Manufactured to OE standards
High quality materials

To fit:

356 1.1-1.5 01/1950-12/1955

356A 1.5-1.6 01/1955-12/1961

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-505-021-00 – Rear Bumper, Complete

Description:

Manufactured to OE standards
High quality materials

To fit:

356 1.1-1.5 01/1950-12/1955

356A 1.5-1.6 01/1955-12/1961

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-511-010-06 – Bonnet

Description:

Front bonnet/hood.

To fit:
356 B T6 1.6 09/1961-12/1963

Compatible Vehicles: - 356 (1961,1962,1963)

Additional Vehicle Info: 356

644-512-001-26 – Engine Lid Rear

Description:

Rear engine lid.

To fit:
356A 1.5-1.6 08/1955-12/1961
356B T5 1.6 01/1959-07/1961

Compatible Vehicles: - 356 (1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

644-521-061-40 – Seat Bucket, Steel, 356 Speedster

Description:

Fits Porsche 356 and Speedster models
Offered in satin black
Fits left or right

Upgrade your Porsche 356, 356 Speedster, or project car with these versatile seat buckets from Dansk. You can leave the bucket in satin black or paint it in a finish of your choice. For a more customised look, the "Reutter style" (part number 644-521-061-40/R) allows you to add seat and back foam, then upholster it to suit your preferences.

These seat buckets provide a simple and flexible seating solution. Whether you're restoring a classic or building something unique, you have the option to keep it minimal or fully upholstered for added comfort.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-521-061-40/R – Seat Bucket, Steel "Reutter style", 356 Speedster

Description:

Fits Porsche 356 and Speedster models
Can be upholstered
Fits left or right

Upgrade your Porsche 356, 356 Speedster, or project car with these versatile seat buckets from Dansk. The "Reutter style" allows you to add seat and back foam, then upholster it to suit your preferences.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

644-541-921-06 – Connecting Clip for Chrome Window Moulding

Description:

Connecting clip for the chrome window trim moulding.

To fit:
356 B-T6 1960-1965
356C 1960-1965
912 1965-1969
911 1965-1983
911 (930) Turbo 1975-1983

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 356,911,912,930

644-552-820-03 – Knob for Door Quarter Window Latch Black

Description:

Knob for the opening door quarter window latch in black.

To fit:
356 1950-1965
911 1965-1977
912 1665-1969
912E 1976
911 (930) Turbo 1975-1977

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977)

Additional Vehicle Info: 356,911,912,912E,930

644-555-515-00 – Headliner Rod Rubber End Cap

Description:

Rubber end cap for the headliner support rods. Coupe models only, 8 required per vehicle.

To fit:
356 B, C 1960-1965
911 1965-1989
912 1965-1969
911 (930) Turbo 1975-1989
911 (964) 1989-1994
911 (993) 1994-1998

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 356,911,912,930,964,993

644-572-971-00 – Hot Air Breather Hose

Description:

Hot air breather hose in original tan paper/aluminium material.

To fit:
356 1960-1965
912 1965-1969

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

644-628-311-10 – Wiper Blade, Front, Silver

Description:

Fits left or right
Silver painted finish
255mm

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356