Fitment #20

111-201-557/C – Fuel Filler Cap Seal 80mm

Description:

Replacement fuel cap to filler neck seal, 80mm diameter.

Compatible Vehicles: - Beetle (1956,1957,1958,1959,1960)

Notes:Please ensure that the seal is properly seated in the filler cap before screwing the cap back onto the neck.

Additional Vehicle Info: Beetle

111-209-021/F – Fuel Reserve Tap

Description:

Fuel Tank Reserve Tap (Does not include filter gauze - order separately 111-209-147/A)

Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-209-147/A – Brass Fuel Tank Filter

Description:

Filters fuel at the exit pipe inside the fuel tank
Size: 96x16mm, perfect for most petrol tanks
Sold individually for easy replacement

This fuel tank exit tube filter is designed to be located on the exit pipe inside your fuel tank, ensuring that only clean fuel flows to the engine. The 96x16mm size makes it compatible with most petrol tanks, offering reliable filtration to prevent debris from entering the fuel system.

Sold individually, this filter is essential for maintaining the health of your engine and fuel system, providing clean fuel for smooth and efficient performance.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 914 (1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 914,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-209-147/A/R – Plastic Fuel Tank Filter

Description:

Fuel tank exit tube filter.

Length - 50mm

Hole ID - 10mm

Collar size under flange - 11.5mm

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-209-189/A – Grommet for Fuel Pipe Through Chassis

Description:

Fits fuel line through chassis spine
Durable rubber for long-lasting seal
Sold individually (each)

This rubber grommet is designed to protect and seal the fuel line as it passes through the spine of the floor pan. It helps prevent chafing and reduces the risk of fuel line damage from vibration or movement.

Made from high-quality rubber, it ensures a snug fit and long-lasting durability. Ideal for Beetle and other classic VW models using a central spine fuel line layout. Sold individually.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-251-051/G – Exhaust Silencer

Description:

Perfectly designed for 30HP engine compatibility
Reduces noise while enhancing engine performance
Durable construction for long-lasting reliability

Enhance your engine's performance with our Exhaust Silencer specifically designed for 30HP engines. This silencer effectively minimizes noise without compromising power, allowing for a smoother driving experience. Its precise engineering ensures a perfect fit and optimal exhaust flow.

Crafted from high-quality materials, this exhaust silencer is built to withstand the demands of the road. Whether you're restoring a classic or upgrading your current setup, this product offers both reliability and efficiency, making it an essential addition to your engine system.

Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960) - Beetle Cabrio (1955,1956,1957,1958,1959,1960)

Notes:This is just the silencer, the gaskets and fixing kits are also available separately. On the heater pods, there will be manufacturing inserts, these need to be removed before fitting.

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-251-051/H / – Exhaust Silencer 1200cc

Description:

Designed specifically for 1200cc engines with fresh air heat exchangers
Features a stylish twin tailpipe for a distinctive look
Enhances performance while reducing noise levels

Revitalise your exhaust system with our exhaust silencer, tailored for 1200cc engines equipped with fresh air heat exchangers. This silencer not only boosts engine efficiency but also features a sleek twin tailpipe design that adds a touch of style to your vehicle.

Constructed from high-quality materials, this exhaust silencer ensures durability and long-lasting performance. Enjoy a quieter ride without sacrificing power, making it an ideal choice for both everyday driving and special occasions.

Notes:Requires tailpipes and fitting kit to fit. Unsure if you have a 1200? Exhaust ports centre to centre are approx. 595mm apart.

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-251-051/H/SS – Stainless Steel Exhaust Silencer 1200cc

Description:

High-quality stainless steel construction for lasting durability
Polished finish enhances the look under your Beetle
No more rust, exhaust blowing, or struggle with rusty nuts
Complete with-TÜV-EEC-approval

This stainless steel 1200cc Beetle exhaust is designed to deliver both performance and style. Constructed from premium stainless steel, it offers superior resistance to rust and wear, meaning no more worrying about holes, exhaust blowouts, or dealing with the frustration of corroded bolts. The sleek, polished finish not only complements the look of your Beetle but also ensures it stands the test of time.

By upgrading to this high-quality exhaust, you're making a smart investment in both the longevity of your car and your own peace of mind. Say goodbye to the headaches of rusty exhaust systems and treat yourself and your Beetle to an exhaust that not only sounds great but will keep performing for years to come.

Notes:Unsure if you have a 1200? Exhaust ports centre to centre are approximately 51cm apart.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-251-051/L – Exhaust Silencer for Stale Air Heater System

Description:

Exhaust silencer for 1200cc 34hp engine with stale air heat exchangers. (No pods, longer pipe work)

Compatible Vehicles: - Beetle (1960,1961,1962) - Beetle Cabrio (1960,1961,1962)

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-251-165/B – Tail Pipe

Description:

Tail pipe, painted grey for a 1200cc 25HP early engine.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955) - Beetle Cabrio (1950,1951,1952,1953,1954,1955)

Notes:This is just the tail pipe, fixings and fixtures involved with the exhaust and tail pipe are available separately. Please note, this is a special order item.

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-251-261/B / – Cylinder Head to Exhaust Gasket

Description:

Durable gasket for high-temperature performance
Perfect fit between cylinder head and exhaust components
Compatible with heat exchangers for efficient sealing

This high-quality gasket is designed to ensure a tight seal between the cylinder head, exhaust box, and heat exchanger. Built to withstand extreme temperatures, it prevents leaks and maintains optimal engine performance. Its robust construction guarantees durability, making it a reliable choice for demanding environments.

The gasket offers precision fitting, reducing the risk of exhaust gas leakage and enhancing the overall efficiency of the engine system. Whether for automotive or industrial use, this gasket provides a long-lasting solution for your exhaust and heat exchange needs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-251-263/A – Pre-Heat Gasket 25-30hp

Description:

Carburettor, inlet manifold pre heat gasket. Sold as each. For T1 & T2 fitted with an early 25/30HP 1200cc engine.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Split

111-255-355 – Heat Exchanger to Body Metal Heater Tubes

Description:

Heater tube for heat exchanger to body, 50mm diameter to heat exchanger 50mm diameter to body.

Fits 1964 and earlier Beetles equipped with stock engine and heat exchangers.

Measure your car and heat exchangers before ordering to ensure tubes are correct size.

Articulated metal, pair

For T1 -7/64 25/30hp 34hp Stale Air

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964)

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-255-355/R – Heat Exchanger to Body Heater Tube

Description:

Heater tube for heat exchanger to body

Measure your car and heat exchangers before ordering to ensure tubes are correct size.

Made of corrugated plastic,

For Beetle up to 7/64 25/30hp 34hp Stale Air

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-255-415/F / – Left Side Bakelite Heater Tube

Description:

Left hand side Bakelite heater tube fitted under the rear seat.

This tube direct the warm air from the heat exchangers into the vehicle.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-255-416/F / – Right Side Bakelite Heater Tube

Description:

Right hand side Bakelite heater tube fitted under the rear seat.

This tube direct the warm air from the heat exchangers into the vehicle.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-255-419/B / – Foam Gasket – Heater Tube to Rear Cross Member

Description:

Seals heater tube to rear cross member
Fits under boot floor area
Sold individually – 2 needed per car

This foam gasket is designed to seal the Bakelite heater tube to the rear cross member beneath the boot floor. It helps prevent air leaks and ensures efficient airflow through the heating system.

Sold individually, two gaskets are required per vehicle. Ideal for restoration or maintenance work to keep your heating system performing as it should.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-255-483/ / – Dashboard Vent Trim, Centre

Description:

Fits vehicles with factory metal dashboards
Restores clean, original dash appearance
Easy to install and durable finish

This centre dash trim is designed for vehicles equipped with a factory metal dashboard, offering a neat and tidy finish to the central dash area. It helps restore the original look of classic interiors and covers any wear or gaps around the dash components.

Made from quality materials with a durable finish, it’s a great choice for restorations or replacements. Simple to fit and built to last, it adds a clean, factory-style touch to your dashboard.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - Beetle Cabrio (1965,1966,1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-298-003 – Exhaust Fitting Kit 25-30hp

Description:

Exhaust fitting kit. For 25/30HP twin tailpipe exhaust system. The kit includes head to silencer gaskets, pre-heat tube gaskets. Mounting nuts, tinware screws and heat exchanger to silencer gaskets and clamps.

Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - T2 Split Bus (1955,1956,1957,1958,1959)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Split

111-298-007 – Exhaust fitting kit T1/T2 60-62 1.2-1.5 Stale Air

Description:

Exhaust fitting kit. For stale air exhaust system. The kit includes head to silencer gaskets, pre-heat tube gaskets. Mounting nuts, tinware screws and heat exchanger to silencer gaskets and clamps. HJS Made in Germany.

Compatible Vehicles: - Beetle (1960,1961,1962) - Beetle Cabrio (1960,1961,1962) - Karmann Ghia (1960,1961,1962) - T2 Split Bus (1960,1961,1962)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-298-009/A / – Exhaust fitting kit

Description:

German manufacture
Comes with mounting nuts, tinware screws, and heat exchanger to silencer gaskets
Complete with clamps for secure installation

This German exhaust fitting kit provides everything you need for a comprehensive exhaust system installation. The kit includes essential gaskets for the head-to-silencer connection, pre-heat tube, and heat exchanger to silencer, as well as mounting nuts, tinware screws, and clamps.

If you're installing a Twin Hot Spot exhaust, don't forget to purchase 2x 113-251-263/D for a complete setup. This kit ensures a secure and efficient exhaust system fitment for your vehicle.

Compatible Vehicles: - Beetle (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-298-051/ / – Fitting Kit Tail Pipe 8/55>

Description:

Complete kit for easy installation of tail pipes
Includes all necessary components for a secure fit
Durable materials ensure long-lasting performance

Revitalise your exhaust system with our Tail Pipe Fitting Kit, designed for easy and secure installation of tail pipes. Each kit contains all the essential components you need for a hassle-free setup.

Crafted from high-quality materials, this fitting kit ensures durability and reliability. Enjoy a smooth and efficient exhaust system with the confidence that your tail pipe is securely attached. Perfect for enthusiasts and professional mechanics alike!

Compatible Vehicles: - Beetle (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-298-051/A – Vintage Speed Mounting Kit Tail Pipe or Heat Exchanger Clamp

Description:

100% stainless steel construction for durability
Designed for tail pipe or heater box mounting
Manufactured by Vintage Speed for quality and fit

This Vintage Speed mounting kit is crafted from 100% stainless steel, providing a strong and corrosion-resistant solution for securing your tailpipe or heater box. Perfect for maintaining a reliable and long-lasting connection, this kit is built to handle the demands of daily driving and harsh conditions.

Whether you're working on a restoration project or upgrading your exhaust system, this mounting kit ensures a secure fit and enhances the overall performance of your vehicle. Trust Vintage Speed for top-quality craftsmanship and materials that stand the test of time.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Australia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle Mexico (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split

111-298-101/A / – Heater Control Cable to Heat Exchanger Mount Kit

Description:

Complete kit to connect heater cables to heat exchangers
Sold individually; two kits required for both sides
High-quality replacement part by Forst

This heater cable fitting kit includes everything you need to connect your heater cables to the heat exchangers, ensuring efficient operation of your vehicle's heating system. Manufactured by Forst, this kit is a durable and reliable replacement part.

Sold individually, you will need two kits to repair both sides of your vehicle's heating system. Ideal for restoring or upgrading your heater cable connections, this kit provides a perfect fit for a smooth and functional heating experience.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Does not fit T25

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-298-101/A/G – Heater Cable Clamp Kit

Description:

Securely connects cable to heat exchanger
Fits all air-cooled VW models
Complete kit – 2 required per vehicle

This clamp kit is designed to connect the rear end of the heater cable to the heat exchanger on all air-cooled Volkswagen applications. It ensures a secure and reliable fit, helping restore proper heater function.

Each kit includes all the necessary components for a complete installation. Sold individually—two kits are required per vehicle (one per side). Perfect for maintenance, restoration, or repairs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Does not fit T25

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-301-155/ / – Gearbox Armature Bush 6V Starter Motor

Description:

Designed for original 6V gearbox applications
Supports 6V starter motor armature shaft
Precision fit for smooth starter engagement

This gearbox armature bush is specifically made to accommodate the armature shaft of a 6V starter motor in its correct 6V gearbox housing. It ensures proper alignment and smooth operation of the starter, maintaining reliable engine starts in vintage VW models.

Manufactured to exacting standards, this bush is ideal for restorers and enthusiasts keeping their classic VW T1 or T2 running with original 6V electrical systems. Not suitable for use in 12V gearboxes or conversion setups.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Notes:It is advisable to replace this bush when replacing the starter motor

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-301-207 – Guide Bush for Gearbox Nose Cone

Description:

Guide bush for the gear selector rod located in the gearbox selector nose cone

Compatible Vehicles: - Beetle (1947,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Notes:Please make sure the bushes are seated properly in the nose cone before reassembly.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,T2 Split,Type 3

111-301-255 – Gearbox Rear Cradle Support

Description:

Ensures a secure gearbox fit
Durable construction for long-lasting support
Keeps the gearbox stable during operation

This gearbox rear cradle support is a crucial component designed to keep your gearbox securely in place. Built to withstand the rigours of daily use, it provides reliable stability and prevents unnecessary movement, ensuring smooth performance and longevity.

Made from high-quality materials, this support guarantees durability and resistance to wear. It helps maintain the integrity of your gearbox by minimising the risk of misalignment or damage, making it an essential part of your vehicle’s drive-train system.

Compatible Vehicles: - Beetle (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle Cabrio (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Can be fitted to 72- Beetle if 113-301-263\/A mounts are used

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-301-265 – Front Gearbox Mount

Description:

Front gearbox mount, locates between the front of the gearbox nosecone and vehicle chassis

To fit
Beetle and Karmann Ghia models from October 1952 to 1959 and 1961 models.
Splitscreen buses from 1960 to 1962.

Compatible Vehicles: - Beetle (1952,1953,1954,1955,1956,1957,1958,1959,1961) - Karmann Ghia (1961) - T2 Split Bus (1960,1961,1962)

Notes:For 1960 Beetle models use 111-301-265\/C

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Split

111-301-289 – Rubber Seal for Gearbox Nose Cone

Description:

Rubber seal for gearbox nose cone.
Locates between the end of the nose cone and the body of the vehicle

Compatible Vehicles: - Beetle (1952,1953,1954,1955,1956,1957,1958,1959,1960) - Beetle Cabrio (1952,1953,1954,1955,1956,1957,1958,1959,1960)

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-301-289/B – Gearbox Nose Cone to Chassis Seal

Description:

Prevents dirt and dust from entering the gear linkage
Quality German part, designed for durability
Located between the gearbox nose cone and the chassis

This gearbox nose cone to chassis seal is a high-quality German product designed to protect the gear linkage and body pan from dirt and dust. Located between the gearbox nose cone and the chassis, it ensures a clean and well-maintained shift rod system.

Compatible with all VW Beetles, Ghia and Type 3 from 1961 onward, this seal is an essential component for maintaining the efficiency of your vehicle's gear shifting mechanism and protecting it from contaminants. Easy to install, this part helps ensure smooth and reliable performance.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:If out of stock 111-301-289\/BR can be used as an alternative

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-301-289/BR – Gearbox Nose Cone to Chassis Seal

Description:

Prevents dirt and dust from entering the gear linkage
Quality reproduction part, designed for durability
Located between the gearbox nose cone and the chassis

This gearbox nose cone to chassis seal is a high-quality reproduction product designed to protect the gear linkage and body pan from dirt and dust. Located between the gearbox nose cone and the chassis, it ensures a clean and well-maintained shift rod system.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-398-001 – Oil Change Kit for Swing Axle Gearbox

Description:

Oil change kit for gearbox swing axle

Kit contents
Gearbox oil
1 Gearbox input shaft seal
2 hub seal kits
2 axle gaiters

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-398-005/A / – Gearbox Gasket Set

Description:

Gearbox gasket set ideal for when carrying out a full overhaul of your gearbox
To fit IRS and swing axle gearbox

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Extra gaskets for setting axle tube float and for IRS gearboxes maybe required.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-398-005/A/G – Gearbox Gasket Set

Description:

Gearbox gasket set ideal for when carrying out a full overhaul of your gearbox

Kit contents
1x Nose cone gasket
1x Gear Carrier gasket
2x O-rings for final drive cover
2x O-rings for axle flange
1x Input shaft gasket
8x Axle tube flange gaskets
1x Seal for reverse light switch
1x seal for nose cone

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Split

111-398-005/AD – Gearbox Gasket Set including Metal Lock Tabs

Description:

High-quality gearbox gasket set
Includes metal lock tabs for secure installation
Perfect for maintaining gearbox performance

This gearbox gasket set is designed to provide a reliable seal for your gearbox, ensuring smooth operation and durability. It includes metal lock tabs that enhance the security of the installation, preventing leaks and potential damage.

Ideal for those seeking a dependable solution for gearbox maintenance, this gasket set helps extend the life of your vehicle's transmission system. With precision engineering, it offers a perfect fit and long-lasting performance.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-401-273 – Bump Stop for Front Axle Beam

Description:

Essential for cushioning and protecting the front axle
Sold individually; 2 required per vehicle
Durable construction for reliable performance

This front axle beam bump stop is designed to protect your vehicle's suspension system by cushioning the front axle during travel. It helps absorb shocks and prevent damage to the suspension components, ensuring smoother handling and a more comfortable ride.

Sold individually, you will need two of these bump stops for a complete installation. A durable and reliable replacement part, perfect for maintaining the integrity and function of your vehicle's front axle.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-401-301 – Front Axle Beam Needle Bearing Upper and Lower

Description:

Fits the upper tube 66-79 and both upper and lower 60-65.
Sold individually; 4 required per axle for 1960-1965, 2 for 1965 onwards
Ideal replacement for smooth front axle function

This needle bearing is designed for use in the front axle of VW Beetles. It fits both the upper and lower tubes on 1960-1965 models, and the upper tube only on 1966-1979 models. The high-quality roller bearing ensures smooth rotation and efficient axle movement.

Sold individually, you will need 4 of these bearings for each axle on 1960-1965 models and 2 for 1965 and onwards. A vital component for restoring or maintaining the front axle, it ensures optimal performance and durability.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Trekker (1969,1970,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker

111-401-315 – Torsion Arm Bush Front Axle Beam

Description:

Torsion arm bush for the front beam
Fits Beetle up to 1965

Notes:To install this bush you must have a reaming tool to ensure perfect fitment

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-401-315/R – Torsion Arm Bush Front Axle Beam Nylon

Description:

Nylon Torsion arm bush for the front beam
Fits Beetle up to 1965

Notes:

To install this bush you must have a reaming tool to ensure perfect fitment

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-405-129 – Trailing Arm Grease Seal for Front Axle

Description:

Designed for front axle beam torsion arm seal
Sold individually; 4 required per axle
Fits VW Beetles and Karmann Ghia up to 1965

This trailing arm grease seal is specifically made for the front axle beam, providing a secure seal for the torsion arms and preventing grease leakage. Essential for maintaining proper lubrication and performance, it ensures smooth movement of the axle components.

Sold individually, four seals are required per axle for VW Beetles and Karmann Ghia models up to 1965. A durable, high-quality replacement part that helps maintain the integrity and function of the front suspension system.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

111-405-527 – Link Pin Shim

Description:

OE-spec German-made camber adjustment shim
Fits VW Beetle (up to chassis 115 999 000)
Also suits all Porsche 356 A/B/C models

This Link Pin Shim is a precision-made component used to adjust camber in the front suspension of classic vehicles. Manufactured in Germany to original equipment specifications, it ensures accurate alignment and long-lasting performance.

Suitable for VW Beetles up to chassis number 115 999 000 (1961–1965: 16 per side, pre-1960: 20 per side) and all Porsche 356 A/B/C models (18 per side), these shims are essential for proper suspension setup and handling. Ideal for restorations or routine maintenance.

34mm x 18mm x 0.5mm

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356,Beetle,Beetle Cabriolet,Caddy,Jetta,Karmann Ghia

111-405-615/B – Front Brake Drum, 4x130 Stud Pattern, Single

Description:

Sold individually; replace in pairs for best results
4x130 PCD stud pattern; not for 1302 & 1303 models
Ensures reliable braking performance

Restore your vehicle’s braking system with this front brake drum featuring a 4x130 PCD stud pattern. Sold individually, it is recommended to replace brake drums in pairs to ensure balanced performance and safety. This drum is not suitable for 1302 and 1303 models.

Designed to provide reliable braking performance, this drum ensures your vehicle remains safe and responsive on the road. Choose this high-quality replacement part to maintain optimal braking efficiency and vehicle safety.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970)

Notes:A front wheel bearing kit 311-498-017\/B is required when fitting. It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-405-625/A – Front Wheel Bearing, Inner, Outer

Description:

Front wheel bearing for Beetle and Karmann Ghia
Fits to the inner side of Beetle and Karmann Ghia
Outer side fitment for Splitscreen models

This front wheel bearing is designed to provide a precise fit for classic Volkswagen models, ensuring smooth and efficient operation of your vehicle's wheel assembly. Specifically, it fits the inner side for Beetle and Karmann Ghia, providing optimal performance for these iconic cars.

For Splitscreen models, this bearing is designed to fit on the outer side, delivering a secure and stable connection for reliable handling. Whether you're restoring a classic or maintaining your vehicle, this front wheel bearing offers the quality and durability you need

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-405-625/A/BQ – Front Wheel Bearing, Inner, Outer

Description:

Front wheel bearing for Beetle and Karmann Ghia
Fits to the inner side of Beetle and Karmann Ghia
Outer side fitment for Splitscreen models

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-405-631/B – Spacer for Front Inner Wheel Bearing

Description: Spacer for front inner wheel bearing on king and link pin models.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-405-641/A – Hub Seal for Front Brake Drum Inner Wheel Bearing

Description:

Fits the inner side of the front brake drum
Helps seal the inner wheel bearing
Supports the performance of the braking system

This hub seal is designed to fit the inner side of the front brake drum, providing a reliable seal for the inner wheel bearing. It helps keep out dirt and debris, which can extend the life of the bearing and support smooth operation.

Built with durable materials, this hub seal contributes to the steady performance of your vehicle’s braking system. It’s a practical choice for those looking to maintain their vehicle’s reliability.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-405-645/A – Front Outer Wheel Bearing

Description:

Front outer wheel bearing.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-405-645/A/BQ – Front Outer Wheel Bearing

Description:

Precision-engineered for durability
Reduces friction for smoother rides
Easy installation for various vehicles

The outer front wheel bearing is designed to enhance your vehicle’s performance by minimising friction and ensuring smooth wheel rotation. Made from high-quality materials, it offers long-lasting reliability and a quiet ride. Perfect for maintaining optimal wheel alignment and handling.

Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia

111-405-661 – Thrust Washer for Hub Nut

Description:

Thrust washer for the front wheel bearing, Locates between the wheel bearing and the hub nut.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - T2 Split Bus (1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split

111-405-661/BQ – Thrust Washer for Hub Nut Best Quality

Description:

Thrust washer for the front wheel bearing, Locates between the wheel bearing and the hub nut.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split

111-405-671 – Hub Nut with Left Hand Thread

Description:

Hub nut with left hand thread to fit the front spindle
Supplied in singles x2 required per hub

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-405-672 – Hexagon Nut for Front Hub or Steering Wheel

Description:

Hexagon nut M18x1.5. Used to secure the front hub or as steering wheel retaining nut.

To fit:
Beetle -1965 Front hub nut
Beetle 8/1959-12/1973 Steering wheel nut
Karmann Ghia -1965 Front hub nut
Karmann Ghia 8/1959-12/1973 Steering wheel nut
Type 3 -1965 Front hub nut
Type 3 1962-1973 Steering wheel nut
356 1960-1965 Steering wheel nut
911 1965-1989 Steering wheel nut
914 1970-1976 Steering wheel nut
914 1970-1976 Rear shock absorber lower securing nut
928 1978-1995 Steering wheel nut

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965) - 356 (1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:A Mexican Beetle may use twin hub nuts but we can only replace them with a clamping nut.

Additional Vehicle Info: 356,911,912,914,928,930,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-405-681 – Retaining Plate for Front Hub Nut

Description:

Retaining plate for front hub nut
Supplied in singles x2 required per vehicle

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-405-691. – Grease Cap Left Front Hub with Speedo Cable Hole

Description:

Grease cap left front hub with speedo cable hole.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-405-691/B / – Grease Cap, Left, Front Hub with Speedo Cable Hole

Description:

Fits left-hand front hub with speedo cable
Includes hole for speedometer cable entry
Protects hub from dirt and moisture

This front hub grease cap is designed for the left-hand side and features a hole to accommodate the speedometer cable. It helps keep grease in and contaminants out, ensuring smooth hub operation while maintaining accurate speedo function. Ideal for classic VW models with cable-driven speedometers.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-405-692. – Grease Cap Right Front Hub

Description:

Grease cap right front hub.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-405-692/B – Grease Cap Right Front Hub

Description: Grease cap right front hub.

Notes:Slightly different design from original but fits\/works just the same.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-411-027 – Torsion Leaves for Axle Beam

Description:

Standard length axle beam leaves
1 pack (2 required per axle) to fit king and link pin beam.

Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Buggy/Baja (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

111-411-027/F – Torsion Leaves for Link Pin Axle Beam

Description:

Standard-length axle beam leaves for king and link pin setups
Comes in a single pack (2 packs needed per axle)
Durable and precise fit for enhanced suspension performance

Upgrade your vehicle’s suspension with these standard-length axle beam leaves, designed to fit king and link pin axle beams. This product comes in a single pack, and you will need two packs for each axle. Engineered for durability, these leaves help provide a smooth and stable ride.

Built to exact specifications, they ensure a precise fit and long-lasting performance. Whether you're restoring or maintaining your vehicle, these axle beam leaves deliver the reliability and strength you need.

Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-411-151/R – Threaded Pin for Torsion Bar Leaves

Description:

Secure fit
High strength
Reliable performance

This threaded pin is designed to secure the torsion leaves and arms to the front beam. Its high strength and secure fit ensure reliable performance, making it a crucial component for maintaining the stability and functionality of your vehicle's suspension system.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-411-155 – Locknut for Torsion Leaves Grub Screw

Description:

Suitable for all torsion bar VW Beetles
Provides a secure, long-lasting fit
Secures trailing arm to torsion leaves

This upgraded lock nut is designed for the front torsion bar retaining grub screw, offering a sturdier build over the standard version. It ensures a tighter, more reliable way of retaining your front suspension trailing arms. On VW Busses the same nut is also used to secure the torsion bar centre retaining sleeve.

For the Grub screw see part number 111-411-151/R

Beetles - x4 are required

VW Busses - x6 are required

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:6 required to replace all

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,T2 Bay,T2 Split,Type 3

111-411-155/R – Lock Nut for Front Torsion Bar Retaining Screw Pin

Description:

Lock nut for front torsion bar retaining screw pin, thicker than standard.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1970,1971) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:6 required to replace all

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

111-413-031/BQ – Bilstein B6 Gas Shock Absorber Front Link Pin Suspension

Description:

Ideal for Stock or Lowered Beetles and Lowered Split Screen Vans
Performance Level: B6 – an upgrade over stock
Gas Pressurised to fit Link Pin front suspension

Bilstein shock absorbers, with their long-standing legacy in OEM quality and racing performance, lead the way in durability and reliability. The B6 model provides an enhanced upgrade in performance over stock, offering superior handling, stability, and comfort for VW Beetle, Ghia and Lowered Split Screen Vans.

With a collapsed length of 261mm and an extended length of 387mm, these shocks deliver the ideal balance of travel and control, making them perfect for everyday driving or more performance-oriented applications.

Notes:

Split Screen - Only Rear

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed. Where OE components are unsuitable, Bilstein will supply appropriate alternatives. Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-413-381/A – Rubber Bush, Ant Roll Bar and Shock Mount

Description:

Versatile use
Easy to install
Check vehicle fitment

This replacement rubber bush is suitable for anti-roll bars or shock mounts, depending on your vehicle application. It's easy to install and versatile, ensuring a secure fit. Please refer to the fitting list below for specific vehicle compatibility. Ideal for maintaining your vehicle's stability and performance.

Fitments
Beetle 67-79 rear anti roll bar
Beetle front lower shock mount
Karmann Ghia front lower shock mount
Baywindow rear lower shock mount
Type 3 front upper shock mount

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-413-401/A – Hexagon Bolt for Front Shock Absorber Mount

Description:

Hexagon bolt for front top shock absorber mount

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962) - Karmann Ghia (1960,1961,1962)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-413-403/A – Hexagon Bolt for Shock Absorber

Description:

Hexagon bolt for shock absorber

Fitments
Beetle 63-65 (from chassis 4846836 & reproduction front beams) top shock mount front
Split 55-67 top shock mount rear
Type3 (from Chassis 64916) top shock mount front

Compatible Vehicles: - Beetle (1963,1964,1965) - Beetle Cabrio (1963,1964,1965) - Karmann Ghia (1963,1964,1965) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-415-061/AA – Steering Box Left or Right Hand Drive not 1302/3

Description:

Steering box for beam axle suspension
Compatible with left or right hand drive
Durable, high-quality construction

This steering box is designed for beam axle suspension systems, ensuring smooth and reliable handling for both left and right hand drive vehicles. It is engineered to offer consistent performance and easy installation, making it a great choice for replacing or upgrading your existing steering mechanism.

Built to withstand the demands of everyday driving, this steering box provides long-lasting durability and optimal steering precision. Whether you’re working on a restoration or a repair, this product ensures a perfect fit and reliable functionality, helping to maintain your vehicle’s performance on the road.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Buggy/Baja (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Can be used on earlier cars but you will need to source a used early 60's drop arm. Supplied ready filled with grease.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Golf Mk1,Karmann Ghia,Trekker,Type 3

111-415-385 – Retaining Plate for Steering Lever Arm

Description:

Secures front steering lever arm in place
Helps maintain proper steering alignment
Strong and durable metal construction

This retaining plate is designed to hold the front steering lever arm securely in position, ensuring stable and accurate steering performance. It's a vital component for maintaining alignment and overall steering safety.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-415-417/ / – Rubber Steering Coupling Disc

Description:

Reduces vibration between the steering column and wheel
This flexible disc connects steering box and steering column
Sold individually; 3 required for VW T25 models

This high-quality rubber steering coupling disc is designed to minimise vibration between the steering column and the steering wheel, ensuring a smoother driving experience. It fits VW Beetle, Ghia and Type 3 with a steering box from 1950 onwards and all VW T25 models.

Sold individually, you'll need three couplings for each T25 van to replace any faulty or cracked parts. A durable and essential replacement for maintaining the integrity of the steering system and reducing unwanted steering wheel vibrations.

Notes:For a complete overhaul of the T25 steering mechanism, you will require x3 of these rubber joints. An alternative reproduction version is also available part number 251-419-417\/B

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

111-415-539 – Steering Column Clamp Beetle / Karmann Ghia / Type3/ Trekker

Description:

This clamp is located on the bottom of the steering column, and is used to tighten the Column

Fits:
Beetle (except 1302 and 1303)
Karmann Ghia
Type 3

Trekker

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

When replacing the steering column clamp, the bolt with which this bracket is mounted can be very tight. If the bolt does not break by itself, it may need to be grinded, and care must be taken not to damage the bracket

Additional Vehicle Info: Beetle,Karmann Ghia,Trekker,Type 3

111-415-581/A – Plastic Bush for Steering Column

Description:

Plastic bush for the upper locating position on the steering column

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959)

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-415-603 – Upper Steering Column Seal

Description:

Upper steering column seal.

Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet

111-415-607 – Rubber Grommet for Steering Column

Description:

Rubber grommet for steering column to bulkhead installation

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet

111-415-611 – Steering Column Bracket and Bush

Description:

Steering column bracket and bushing

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle

111-415-837 – Retaining Clip for Tie Rod Boot

Description:

Retaining clip for tie rod boot

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Polo Mk1/Mk2

111-415-841/A – Tie Rod Locking Clamp

Description:

Tie rod to tie rod end locking clamp.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan.

Additional Vehicle Info: 914,Beetle,Beetle Cabriolet

111-498-021/ / – King Pin Set

Description:

Complete set to overhaul left and right pin carriers
Includes king pins, bushes, and sealing bushes
Precision-engineered for optimal durability and fit

This king pin set provides all the components needed to fully overhaul both the left and right pin carriers of your vehicle. It includes two high-quality king pins, four durable bushes, and two sealing bushes, ensuring a secure and smooth operation. The kit is designed to meet the highest standards of performance and longevity.

Perfect for automotive repairs or maintenance, this comprehensive kit offers an easy solution for restoring your pin carriers. With precision-engineered parts, you can trust in reliable performance and improved vehicle handling.

Notes:Bushes require reaming to fit. 1 set required per vehicle

Additional Vehicle Info: 356,Beetle,Beetle Cabriolet,Karmann Ghia

111-498-051/A / – Link Pin Set

Description:

Complete kit for both sides of your vehicle
Includes all essential components for easy installation
Durable design ensures long-lasting performance

This link pin set provides everything you need to overhaul both sides of your vehicle with ease. Whether you're replacing worn-out parts or upgrading for better stability, the kit comes with all necessary components to ensure a smooth and secure fit.

Crafted for durability and performance, this set is designed to withstand tough driving conditions. Its high-quality materials and precise engineering offer reliable performance and long-term peace of mind.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Notes:1 set required per vehicle

Additional Vehicle Info: 356,Beetle,Beetle Cabriolet,Karmann Ghia

111-498-101/ / – Anti Roll Bar Link Pin Mounting Kit, Front

Description:

Fits king and link pin front beams only
One kit required per side, two per vehicle
Durable construction for reliable performance

This front anti-roll bar mounting kit is designed specifically for vehicles with link pin axle beams. It provides essential support for the anti-roll bar, helping to maintain stability and reduce body roll during turns. Each kit is engineered to fit king and link pin front beams, ensuring a precise and secure fit.

To complete your installation, you'll need one mounting kit per side, making two kits necessary for a full vehicle setup. Built for durability, this kit withstands the rigours of daily driving and helps improve handling and ride quality.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-498-101/A / – Mounting Kit for Front Anti Roll Bar Stainless Steel

Description:

Front anti roll bar mounting kit with stainless steel clamps to fit ball jointed axle beams.
1 kit contains parts to overhaul both sides of the anti-roll bar

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1970,1971,1972,1973,1974)

Notes:Stainless Steel

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-498-101/AR – Anti Roll Bar Mount Kit, Front, Ball Joint Beams

Description:

Fits ball-jointed axle beams for precise handling
Includes parts for one side; two kits needed for full overhaul
Enhances stability and reduces body roll

This front anti-roll bar mounting kit is designed to improve vehicle stability and handling. It ensures a secure fit for ball-jointed axle beams, reducing body roll and enhancing overall driving performance.

Each kit contains high-quality components to refresh one side of the anti-roll bar, restoring its function. For a complete overhaul, two kits are required.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-498-101/ARP – Anti Roll Bar Mounting Kit, Front, Ball Joint Beams

Description:

Fits ball-jointed axle beams for precise compatibility
Includes all components for a full anti-roll bar overhaul
Designed for durability and improved performance

This front anti-roll bar mounting kit is the perfect solution for maintaining or restoring the functionality of ball-jointed axle beams. With every component included, this kit ensures a complete overhaul, making installation straightforward and hassle-free. It's crafted to meet high standards, ensuring a long-lasting, dependable upgrade for your suspension system.

Whether you're addressing wear and tear or upgrading for better handling, this kit provides everything you need to restore your vehicle's stability and control. Tailored for an exact fit, it's an essential addition to keep your ride smooth and responsive.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-498-101/ASS – Front Anti-Roll Bar Mounting Kit Stainless Steel

Description:

Standard anti roll bar mounting kit with a stainless steel clamps.
The kit includes both the large and small rubber bushes and the clamps to fit. 2 kits required per car

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-498-625/BQ – Front Wheel Bearing Kit

Description:

Contains all necessary parts to service one wheel
Top-quality components

This convenient front wheel bearing kit contains all the top-quality parts required to service one front wheel. Designed for ease of use, it includes everything you need to ensure a smooth and reliable wheel operation.

All parts used in this kit are top-quality to guarantee durability and optimal performance, making it an essential choice for maintaining your vehicle's safety and efficiency. Trust our front wheel bearing kit to keep your vehicle running smoothly and securely

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia

111-498-625/F – Front Wheel Bearing Kit

Description:

Contains all necessary parts
Top-quality FORST components
Services one front wheel

All parts used in this kit are top-quality FORST components to guarantee durability and optimal performance, making it an essential choice for maintaining your vehicle's safety and efficiency. Trust our front wheel bearing kit to keep your vehicle running smoothly and securely.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-501-131 – Gearbox Axle Tube Retainer Gasket, 0.5mm

Description:

Durable material
Easy to install
0.5mm thickness

This axle tube retainer gasket is 0.5mm thick and made from durable material. It's easy to install and ensures a secure fit, helping to maintain the integrity of your vehicle's axle tube. Ideal for preventing leaks and ensuring smooth operation.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,T2 Split

111-501-133/A – Gearbox Axle Tube Flange Gasket 0.30mm

Description:

0.30mm thick gasket for swing axle gearbox tubes
Sold individually; ideal for precise axle tube adjustments
Provides a reliable seal to maintain proper axle alignment and prevent leaks

This red flange gasket is designed for swing axle gearbox tubes, providing a reliable seal to maintain proper axle alignment and prevent leaks. With a 0.30mm thickness, it ensures a tight fit, are required to achieve the correct gearbox adjustment.

Sold individually, this gasket is an essential component for swing axle setups, helping to maintain the integrity of the gearbox system and ensuring smooth operation when combined with the standard paper seals in the complete gearbox seal sets.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Stud centres 150mm

Stud holes 8mm

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-501-133/B – Gearbox Axle Tube Flange Gasket, 0.15mm, Swing Axles

Description:

Easy to install
0.15mm thickness
Fits swing axle models

This gearbox axle tube flange gasket is 0.15mm thick and designed for swing axle models. It's easy to install and ensures a secure fit to maintain your vehicle's axle integrity. Ideal for preventing leaks and ensuring smooth operation.

Additional Vehicle Info: Beetle,T2 Split,Type 3

111-501-133/C – Gearbox Axle Tube Flange Gasket 0.28mm

Description:

Flange gasket for swing axle tube, 0.28mm.
Sold individually

Additional Vehicle Info: Beetle,T2 Split,Type 3

111-501-133/D – Gearbox Axle Tube Flange Gasket 0.10mm

Description:

Gasket for axle tube flange 0.004'' / 0.1mm

This CSP Products axle tube gasket matches the original gasket in every aspect, beginning with the material right up to the thickness.

You have to stick to the original VW tolerances, especially when it comes to engines and gearboxes. That's why the correct gaskets are so important

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-501-133/E – Gearbox Axle Tube Flange Gasket 0.20mm

Description:

Gasket for axle tube flange 0.008'' / 0.2mm

This CSP Products axle tube gasket matches the original gasket in every aspect, beginning with the material right up to the thickness.

You have to stick to the original VW tolerances, especially when it comes to engines and gearboxes. That's why the correct gaskets are so important

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-501-139 – Gearbox Axle Flange O-Ring

Description:

Fits in rear axle bearing housing on swing axle gearboxes
Provides a tight seal to prevent oil leaks
Sold individually – check quantity needed per side

This O-ring seal is designed to sit in the rear axle bearing housing on swing axle models, sealing the gearbox axle flange to prevent oil leakage and maintain proper lubrication.

Sold individually, this small but essential component ensures the longevity and performance of your swing axle transmission. Always check your vehicle’s setup to confirm the correct fitment and quantity required.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - 356 (1956) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: 356,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-501-151 – Gearbox Axle Boot Non-Split

Description:

Standard non-split axle boot, as fitted from the factory
Durable design for long-lasting protection
Perfect fit for standard axle applications

The Standard Non-Split Axle Boot is designed to provide optimal protection for your vehicle's axle system, just as it was originally fitted from the factory. This boot ensures a secure seal, preventing dirt, debris, and moisture from damaging the axle, helping to extend its lifespan.

Crafted from high-quality materials, the boot is built to withstand harsh driving conditions while maintaining its integrity over time. Ideal for replacing worn or damaged axle boots, this product guarantees a perfect fit and reliable function, ensuring your vehicle runs smoothly and efficiently.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Notes:You may require fitting clips 111-501-159/B and SGT80-100

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-501-159/B / – Hose Clip, Screw Type 40-60mm Stainless Steel

Description:

Adjustable from 40mm to 60mm for versatility
Durable stainless steel for long-lasting use
Ideal for axle and manifold boots

The Stainless Steel Hose Clip is the perfect solution for securing hose connections in various applications. With an adjustable range of 40-60mm, it offers flexibility and can be used universally, including for axle and manifold boots. Its durable stainless steel construction ensures reliable performance and resistance to corrosion, making it suitable for both automotive and industrial uses.

This hose clip provides a secure and tight fit, preventing leaks and ensuring that hoses stay in place under pressure.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

Popular applications:
Aircooled swing axle boots
Coolant water hoses

Additional Vehicle Info: 914,924,944,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

111-501-159/BOL – Hose Clip for Swing Axle Boot or Heater Hose

Description:

44-66mm Hose clip with VW logo.

This clip is used in the following applications:

Air cooled:

swing axle boots - 2 required
twin port inlet manifold boots - 2 required
air hose from exhaust/heat exchangers to fanshround - 4 required

Mk1 Golf, Mk1 Cabrio, Mk1 Jetta:

1977-1980 - air hose from air box to carb hat - FN, FP, FR, FT, FV, EM, GH & JB engine codes - 2 required
K-Jetronic fuel filter clamp - EG, EH & EJ engine codes - 1 required

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1977,1978,1979,1980) - Golf Mk1 Cabriolet (1979,1980) - Jetta (1979,1980) - Karmann Ghia (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1977,1978,1979,1980) - T2 Split Bus (1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Karmann Ghia,Scirocco,T2 Bay,T2 Split

111-501-160/C – IRS Axle Clip or Inlet Manifold Boot Clip 30-45mm

Description:

Small IRS axle gaiter clip / Large inlet manifold boot clip. Sold individually

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay

111-501-201/A – Axle Short Style Rear

Description:

Fits 1960-66 Swing Axle transmission. Left or right

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

111-501-221 – Rear Brake Drum Castellated Nut 36mm

Description:

Castle Nut for Brake Drum, 36mm, without shoulder

The 36 mm nut that holds the rear drums onto the rear axle, has a castellated head for the split pin.
Castle nuts are tightened to a high degree when fitting so the thread need to be in good condition.
If the head of your nuts are worn or threads are in poor condition replace them with these reproductions

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

111-501-281/A – Inner Rear Wheel Bearing Spacer for Swing Axle Suspension

Description:

Spacer for inner rear wheel bearing. For swing axle suspension.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

111-501-303/B – Swing Axle Outer Wheel Bearing Spacer

Description:

Precision fit: 30mm inner x 44.5mm outer diameter
Designed for rear swing axle applications
Essential for correct bearing preload and alignment

This outer rear axle wheel bearing spacer is specifically designed for swing axle setups. With dimensions of 30mm (inner) by 44.5mm (outer), it ensures a precise fit and proper spacing between the bearing and axle components.

Ideal for classic vehicle restorations or maintenance, this spacer plays a crucial role in maintaining correct bearing preload and axle alignment. Manufactured to meet OEM specifications, it offers reliability and durability for long-term performance.

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962) - Trekker (1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Karmann Ghia,Trekker,T2 Split,Type 3