Fitment #33

113-501-291/A – Drive Flange Cover O-Ring Seal for Swing Axle Suspension

Description:

O-ring oil seal for the drive flange covers on swing axle suspension models

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-501-291/B – Outer O-Ring Seal on Bearing Cap for IRS

Description:

Seals the outer edge of the IRS bearing cap
Prevents grease leaks and protects wheel bearings
Made from durable, oil-resistant rubber

This outer O-ring seal is designed to fit around the bearing cap on IRS (Independent Rear Suspension) rear axles. It ensures a tight seal between the cap and the trailing arm, helping to retain grease and keep out dirt and moisture.

Sold individually, this high-quality rubber O-ring is essential for maintaining the integrity of your rear suspension and drivetrain. Ideal for servicing or restoring classic VW IRS setups.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985) - Type 3 (1969,1970,1971,1972,1973)

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-303 – Outer Spacer for IRS

Description:

Outer IRS rear axle spacer.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-501-315/H – Rear Hub Seal for IRS or Swingaxle

Description:

German quality rear axle hub oil seal
Fits VW Beetle, Ghia, Type 3, Split, and Porsche 924/944/356
Keeps grease in and dirt/moisture out

This high-quality German rear axle hub seal is designed to provide years of reliable service, keeping your rear wheel bearings properly lubricated and protected. It’s an essential component for maintaining the performance and longevity of your classic vehicle’s drivetrain.

Suitable for a wide range of models—including the Volkswagen Beetle, Karmann Ghia, Type 3, Split Screen Van, and Porsche 924, 944, and 356—this seal prevents oil or grease from leaking out while keeping dirt and moisture from getting in. Always replace the hub seal when servicing your rear wheel bearings to ensure optimal protection and performance.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 356,924,944,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-501-327 – Inner CV Joint Concave Washer

Description:

Concave washer, inner CV joint.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1960,1968,1969,1970,1971,1972,1973,1974) - 914 (1970,1971,1972,1973,1974,1975,1976) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T4 (1991,1992,1993,1994) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 914,Beetle,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Jetta,Karmann Ghia,Polo Mk1/Mk2,Scirocco,Transporter T4,T2 Bay,Type 3

113-501-329 – CV Joint Spreader Plate for IRS

Description:

Fits under 6 CV joint securing bolts
3 plates required per joint
Sold individually for flexible ordering

This spreader plate is designed for use with IRS CV joints, fitting neatly under the six securing bolts of each joint. It helps distribute the load evenly, ensuring a secure and long-lasting connection. Each CV joint requires three plates, and they are sold individually to suit your specific needs.

Compatible with a range of classic VW models, including Beetle IRS, Type 3 IRS, Ghia IRS, Golf Mk1 (1975–1984), and Golf Mk2 (1984–1992) with 90mm drive shafts. Ideal for restorations or maintenance where durability and precision matter.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1971,1972,1973,1974) - Type 3 (1971,1972,1973)

Notes:Superseded by: 171-407-357\/C 1J0-407-357 1K0-407-357\/A 1K0-407-357\/B

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Type 3

113-501-331/D – CV Joint Kit for 1302 & 1303

Description:

Complete kit with CV boot, bolts, and clips
Includes spreader plates for easy installation
High-quality grease for optimal performance

Revitalise your 1302 or 1303 Beetle with our comprehensive CV Joint Kit. This all-in-one package includes everything you need: a durable CV boot, essential bolts and clips, spreader plates for hassle-free installation, and high-quality grease to ensure smooth operation. Each component is designed to provide reliable performance and longevity, making this kit an essential addition to your restoration or repair project.

Don't let worn-out CV joints compromise your Beetle's performance. This kit is specifically engineered for a perfect fit in 1302 and 1303 models, ensuring a seamless integration with your vehicle's existing components. Upgrade your ride today and enjoy the smooth, reliable handling you deserve on the road!

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-331/D/J – CV Joint for IRS, LÖBRO

Description:

OE-quality CV joint by Lobro for reliable performance.
Compatible with IRS Beetles & Type 3 models.
Essential components sold separately.

Renew your drivetrain with this premium OE-quality CV joint, crafted by Lobro for superior durability and precision. Designed specifically for IRS Beetles and Type 3 vehicles, this CV joint ensures smooth and efficient power transfer to your wheels, making it a dependable choice for enthusiasts and daily drivers alike.

For optimal results, replace the CV joint rubber boot during installation to protect the joint from dirt and wear. Additional components such as grease, bolts, spreader plates, and CV boot kits are available separately, providing flexibility and convenience. If you notice clicking or clonking sounds from your rear axle—especially during turns—it’s a sign your CV joints may need replacement.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1957,1968,1969,1970,1971,1972,1973,1974,1975,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker,Type 3

113-501-331/DF – CV Joint with Boot,Bolts & Grease, 1302/03, Ghia

Description:

Complete CV Joint Kit: Everything you need for your classic VW 1302/3 Beetle or Type 3 in one package.
High-Quality Components: Durable CV joint, boot, bolts, clips, plates, and grease included.
Perfect Fit: Designed specifically for classic VW Beetle models.

Repair your classic VW with this comprehensive CV joint kit. Engineered for reliability and performance, this kit includes a high-quality CV joint, a sturdy CV boot, bolts, clips, spreader plates, and premium grease, ensuring a hassle-free installation. It's an all-in-one solution to keep your vehicle running smoothly and safely.

Whether you're restoring a vintage Beetle or performing regular maintenance, this CV joint kit provides the durability and precision you need. Each component is crafted to fit seamlessly with your vehicle, delivering exceptional value and peace of mind for Beetle enthusiasts.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Notes:

For vehicles with IRS rear axles

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-533 – Washer for IRS A-arm bolt

Description:

Washer for IRS A-arm pivot mount bolt. Sold individually. Two required per bolt.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

113-501-535/A – Suspension Arm Bolt with Washers for IRS

Description:

Rear IRS A arm bolt. Comes with the Washers. These are sold as a single bolt with two washers each.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-541/C – Rear Trailing Arm Bush IRS

Description:

Rear A-Arm / Trailing Arm Bush.

For vehicles with IRS rear suspension.

x4 required per vehicle.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Notes:For vehicles fitted with IRS.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-615/D – Rear Brake Drum, 5x205 Stud Pattern, Single

Description:

Supplied individually, replace in pairs
5x205 PCD stud pattern for secure fit
Ensures smooth braking performance

This rear brake drum, featuring a 5x205 PCD stud pattern, is a vital component for your vehicle’s braking system. Supplied as a single unit, it is strongly recommended to replace brake drums in pairs for balanced and efficient braking performance.

Designed to deliver reliable stopping power, this brake drum ensures optimal fit and function. Whether you're maintaining or upgrading your vehicle, this high-quality part will keep your braking system performing at its best.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-615/D/PR – Rear Brake Drum, 5x205 Stud Pattern, Pair

Description:

Supplied as a pair
5x205 PCD stud pattern
Durable construction for reliable braking

Restore your vehicle's braking system with our rear brake drums, featuring a 5x205 PCD stud pattern. Supplied as a pair, these drums ensure a comprehensive solution for rear brake restoration. Crafted for durability and reliability, they provide consistent braking performance.

Perfect for maintaining or restoring your vehicle’s braking system, these drums offer a precise fit and long-lasting durability. Ideal for both daily use and restoration projects, they deliver dependable performance and enhance overall safety on the road.

Compatible Vehicles: - Beetle (1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Karmann Ghia

113-501-615/DBQ – Rear Brake Drum 5x205 PCD Best Quality

Description:

Rear brake drum. This drum features a 5x205 PCD. Supplied each

Whilst we sell brake drums individually we would recommend that you change them in pairs.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1956,1958,1959,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-615/J / – Rear Brake Drum, 4x130 Stud Pattern

Description:

Supplied as singles; recommended to replace in pairs
High-quality, durable construction
Ensures smooth and safe braking performance

This rear brake drum features a 4x130 PCD stud pattern and is supplied individually, though it’s advised to replace them in pairs for balanced performance. Designed for durability, it ensures reliable braking and a smooth ride.

Replacing brake drums in pairs helps maintain optimal safety and performance, preventing uneven wear. Whether for routine maintenance or restoring your vehicle, this brake drum offers high-quality construction you can trust.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-615/JBQ – Rear Brake Drum 4x130 PCD Best Quality

Description:

Rear brake drum. This drum features a 4x130 PCD.

Supplied as a pair

Notes:

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-615/JO – Rear Brake Drum, 4x130, Beetle 68-79 SEBRO

Description:

Rear brake drum. This drum features a 4x130 stud pattern. Supplied each

Whilst we sell brake drums individually we would recommend that you change them in pairs.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

113-501-737/A / – Rear Anti-Roll Bar Rubber Stop for Swing Axle

Description:

Rear anti-roll bar rubber stop for Swing axle suspension.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:2 Required.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-501-753 – Rear Anti Roll Bar / Z-Bar Guide Ring

Description:

Rubber guide ring for anti-roll bar (Z bar)
Fits lower part of the anti-roll bar drop link
Ensures secure fit on suspension mount

This rubber guide ring is designed for the anti-roll bar, sometimes referred to as a Z bar. It fits the lower part of the anti-roll bar drop link, providing a secure and stable connection where it meets the suspension mounting point.

Made from durable rubber, this guide ring helps prevent wear and ensures smooth operation of your vehicle’s suspension system. It’s an essential component for maintaining the proper alignment and function of the anti-roll bar.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-501-809 – Cover for Z-bar bushing, inner, year 8/66 Beetle, Ghia.

Description:

This bracket is located at the top of the rear anti-roll bar z-bar on all VW Beetles and Karmann Ghias, from August 1966 onwards.

Two required per vehicle

Sold individually

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:2 Per car sold each

Additional Vehicle Info: Beetle,Karmann Ghia

113-501-811 – Cover for Z-bar bushing, outer, year 8/66 Beetle, Ghia.

Description:

Anti roll bar bracket at the top of the antiroll bar link.
Two required per vehicle
Sold individually

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Karmann Ghia

113-501-813 – Rear Anti-Roll Bar Rubber Bush Mount

Description:

The rear anti roll bar/ Z-bar rubber mounting bush/block. Sold individually.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-501-819/A – Equaliser rod Long 8/66-79

Description:

Rear anti roll bar equaliser rod for the left side.
Not suitable for 1302/3

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Karmann Ghia

113-501-820/A – Rear Anti-Roll Bar Equaliser Rod

Description:

Rear anti roll bar short equaliser rod.
For the right side.
Not suitable for 1302 & 1303 models

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Karmann Ghia

113-501-831 – Rear Anti-Roll Bar Compensator Sleeve Long

Description:

Compensator Plastic Sleeve (Long) for anti roll bar/Z bar vertical linkage.
Suitable for swing axle beetles 66-67.

Compatible Vehicles: - Beetle (1966,1967) - Beetle Cabrio (1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-501-832 – Rear Anti-Roll Bar Compensator Sleeve Short

Description:

Compensator Plastic Sleeve (Short) for rear anti Roll bar vertical link bar.
Fits Beetle Swing Axle Suspension 66-67

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-501-835 – Rear Anti-Roll Bar Upper Compensator Bush

Description:

Fits between anti-roll bar link and arm
Sold individually – 4 bushes required per vehicle
Durable rubber compound for long-lasting performance

This upper bush is designed for the rear anti-roll (Z) bar, fitting between the link and the arm. It plays a crucial role in maintaining stability and reducing body roll during cornering.

Manufactured from high-quality materials, it ensures a snug fit and reliable performance under load. Ideal for suspension maintenance or full restoration projects.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-501-899 – Bolt for Z-Bar Link

Description:

Z-bar link bolt. Secures vertical link rod to Z-bar arm

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-511-116 – Torsion Bar Right Side 21 3/4'' 21mm Std Swing Axle

Description:

Torsion bar for right side for standard swing axle suspension.

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-511-227/A / – Rear Torsion Bar Cover

Description:

Torsion bar cover protects the suspension components
Without hole for swing axle suspension.
Sold individually; two required per car

This Rear Torsion Bar Cover is designed for swing axle suspension systems, providing a high-quality replacement for your vehicle. The cover comes without a hole, offering flexibility for different suspension setups and installations. It is sold individually, and two covers are required per car to fully restore the suspension system.

Made to last, this torsion bar cover protects the suspension components, keeping them free from dirt, moisture, and debris. Whether you're restoring a classic VW or simply replacing worn parts, this cover ensures the proper functioning and longevity of your suspension system.

Notes:For vehicles with swing axle rear suspension.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-511-227/BR – Rear Torsion Bar Cover for IRS

Description:

Torsion bar cover protects the suspension components
Durable design with hole for IRS suspension
Sold individually; two required per car

This Rear Torsion Bar Cover is designed for IRS suspension systems, providing a high-quality replacement for your vehicle. The cover comes with a hole, offering flexibility for different suspension setups and installations. It is sold individually, and two covers are required per car to fully restore the suspension system.

Notes:For use with IRS rear suspension

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia

113-513-031/BQ – Bilstein B6 Gas Shock Absorber Rear

Description:

With over 60 Years of OEM Experience Bilstein Shock Absorbers Lead the Way in Performance and Durability
Performance Level: B6 – an upgrade over stock
Gas Pressurised to fit Swing axle models rear

Bilstein shock absorbers, with their long-standing legacy in OEM quality and racing performance, lead the way in durability and reliability. The B6 model provides an enhanced upgrade in performance over stock, offering superior handling, stability, and comfort for a range of classic VW models, including the Beetle, Ghia, Squareback, and Split Screen.

With a collapsed length of 261mm and an extended length of 387mm, these shocks deliver the ideal balance of travel and control, making them perfect for everyday driving or more performance-oriented applications.

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

113-513-031/G / – Shock Absorber, Gas, Front and Rear, 385-255mm

Description:

High-quality Boge shock for front or rear suspension
385mm extended, 255mm compressed for perfect fit
Sold individually, always recommended to replace in pairs

This Original Style Gas Filled Shock Absorber with double eye fittings is a top-quality reproduction designed for various classic VW models. Offering a smooth, controlled ride, it fits the front suspension of Beetles and Ghias from 1950 to 1965, the rear swing axle suspension on Beetles, Ghias, and Type 3s, and front and rear suspension of Splitscreen and Baywindow models 68-69 front. It’s a perfect replacement at a great price for anyone restoring or maintaining their classic VW.

With an extended length of 385mm and a compressed length of 255mm, this shock absorber ensures optimal suspension performance. Sold individually, it’s always recommended to replace shock absorbers in pairs for balanced performance and handling. Ideal for restoring comfort and stability to your vehicle, this shock absorber delivers the perfect combination of durability and value.

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

To fit
Beetle 50-65 (front)
Beetle swing axle (rear)
Ghia 56-74 swing axle (rear)
Splitscreen 55-67 (front or rear)
Baywindow 68-69 (front)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

113-513-031/G/S – Front and Rear Oil Shock Absorber, 385-255mm

Description:

Perfect replacement for front or rear suspension
385mm extended, 255mm compressed for optimal fit
Sold individually, but replacement in pairs recommended

This Original Style Oil Filled Shock Absorber with a double eye fitting is a high-quality SSP reproduction designed for various classic Volkswagen models. It fits the front suspension of Beetles and Ghias from 1950 to 1965, rear swing axle suspensions on Beetles (1950-1979), Ghia (1956-1974), and even the Splitscreen (1955-1967), Type 3 swing axle rear. Whether you're restoring your car or replacing worn shocks, this damper provides the perfect balance of comfort and durability.

With an extended length of 385mm and compressed length of 255mm, this shock absorber delivers optimal performance for your vehicle's suspension system. Sold individually, it’s always best to replace shock absorbers in pairs for balanced performance and handling. Offering a great price for top-quality reproduction, this shock absorber will keep your vehicle’s ride smooth and controlled.

Compatible Vehicles: - T2 Bay (1968,1969) - Baywindow USA (1968,1969) - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Fits: Beetle 1950-1965 (front) Beetle 1950-1979 swing axle (rear) Ghia 1956-1974 swing axle (rear) Splitscreen 1955-1967 (front or rear) Type 3 front all years Type 3 swing axle rear

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

113-513-031/GB – Front and Rear Gas Shock Absorber 385-255mm

Description:

High-quality SSP reproduction for front or rear suspension
385mm extended, 255mm compressed for perfect fit
Sold individually, always recommended to replace in pairs

Compatible Vehicles: - T2 Bay (1968,1969) - Baywindow USA (1968,1969) - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Front or rear application depending on vehicle. Beetle and Ghia 50-65 (front) Beetle and Ghia swing axle (rear) Splitscreen 55-67 (front or rear) Baywindow 68-69 (front) Type 3 all years (front) Type 3 swing axle (rear) Supplied in singles but recommended to replace in pairs

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

113-513-031/N – Rear Shock Absorber Oil Filled for IRS, 415-265mm

Description:

Standard oil filled rear shock absorber to fit vehicles with IRS only.

Compressed 265mm / Extended 415mm

Compatible Vehicles: - Beetle Australia (1971,1972,1973,1974,1975,1976) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996) - Beetle Mexico (1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004) - Beetle USA (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3

113-513-031/N/BQ – Bilstein B6 Gas Shock Absorber Rear IRS Models

Description:

With over 60 Years of OEM Experience Bilstein Shock Absorbers Lead the Way in Performance and Durability
Performance Level: B6 – an upgrade over stock
Gas Pressurised to fit IRS models rear

With a collapsed length of 276mm and an extended length of 411mm, these shocks deliver the ideal balance of travel and control, making them perfect for everyday driving or more performance-oriented applications.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-513-031/N/S – Shock Absorber Oil Filled for IRS, Rear 415-265mm

Description:

Ideal for IRS suspension systems
265mm compressed, 415mm extended for optimal fit
Sold individually, replacement in pairs recommended

This Original Style Oil Filled Shock Absorber with double eye fittings is a high-quality SSP reproduction designed to fit IRS (Independent Rear Suspension) systems. Offering excellent performance and comfort, it’s a perfect replacement for your vehicle’s worn-out shock absorbers. With a compressed length of 265mm and an extended length of 415mm, it delivers the ideal suspension support for your classic VW.

Sold individually, this shock absorber is best replaced in pairs to ensure balanced suspension performance. Whether you’re restoring your vehicle or maintaining its suspension system, this shock absorber offers a cost-effective and reliable solution to keep your ride smooth and controlled.

Notes:To fit vehicles with IRS only.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3

113-517-185. – Bearing for Gearbox Differential for Swing Axle Gearbox

Description:

Bearing for gearbox differential for all swing axle gearboxes. Not for early Split-case
Locates behind the transmission side plate

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-517-185/C – Tapered Roller Bearing

Description:

This wheel bearing fits on the VW Bus T3 on the inside front axle - not on Syncro buses.

Fits the VW Beetle & Karmann Ghia with semi-trailing arm axle in the gearbox behind the drive shaft flange and the VW Bus T2 automatic gearbox.

Compatible Vehicles: - T2 Bay (1976,1977,1978,1979) - Beetle (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk2 (1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985) - T4 (1991,1992,1993,1994) - Type 3 (1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Beetle 1969-1979 Differential bearing for IRS gearbox
T25 1980-1992 Differential bearing for auto transmission and front inner wheel bearing (not Syncro)
Mk2 Golf 1990-1992 Differential bearing for manual transmission
Mk3 Golf 1992-1998 Differential bearing for auto and manual transmission
T4 1991-1994 Differential bearing for auto transmission
Corrado 1989-1995 Differential bearing for auto and manual transmission
924 1976-1979 Differential bearing for 4 speed transmission (right) and auto transmission (left and right)
924 1980-1985 Differential bearing for manual transmission (right) and auto transmission (left and right)
924S 1986-1988 Differential bearing for manual transmission (right)and auto transmission (left and right)
944 1982-1985 Differential bearing for manual transmission (right)and auto transmission (left and right)

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Corrado,Golf Mk2,Golf Mk3,Karmann Ghia,Transporter T4,T25,T2 Bay,Type 3

113-517-191/A – Fulcrum Plate Swing Axle

Description:

Fits all swing axle vehicles from 1961 onwards
8.01mm thickness; essential for proper axle movement
Sold individually, 4 required per vehicle

This Standard Size Swing Axle Fulcrum Plate is a critical component for swing axle vehicles, providing support and allowing the axle to move smoothly within the gearbox. With a thickness of approximately 8.01mm, it sits on either side of the axle and plays a key role in maintaining proper axle alignment and movement. Over time, these plates wear down, leading to increased gearbox noise and even potential axle failure, especially in lowered vehicles where the axle angle is more extreme.

Sold individually, this Fulcrum Plate is an essential part for restoring or maintaining your vehicle's suspension system. Four plates are required per car, ensuring optimal movement and function of the swing axle. If you're hearing unusual noises or experiencing axle issues, replacing these plates is an important step in preventing further damage and maintaining your vehicle’s performance.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-517-279 – CV Joint Flange Circlip 24.5x2

Description:

Size: 24.5mm diameter x 2mm thick
Fits inner or outer CV joints (varies by vehicle)
Check fitment before ordering

This CV joint flange circlip measures 24.5mm in diameter and 2mm in thickness. It’s used to secure CV joint flanges in place and may be suitable for either inner or outer joints depending on the vehicle model.

Due to variations in fitment across different vehicles, it’s important to check the required size for your specific application before ordering. Sold individually.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998,1999,2000,2001,2002) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - 914 (1970,1971,1972,1973,1974,1975,1976) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Polo Mk3 6N (1995,1996,1997,1998,1999,2000,2001,2002) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Type 3 (1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 914,Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Golf Mk3 Cabrio,Jetta,Karmann Ghia,Polo Mk3 6N,Polo Mk1/Mk2,Scirocco,T25,T2 Bay,Type 3,Vento

113-598-071/R – Wheel Bearing Kit, Rear for IRS

Description:

Complete kit: bearings, seals, O-ring, circlip, split pin
Perfect fit for VW Beetles, Ghias, and Type-3 models from 1969 >>

This quality IRS rear wheel bearing kit is designed for optimal performance and durability, making it the ideal choice for VW enthusiasts. Compatible with VW Beetles 1302, 1303 as well as Semi-Automatic, 1302, 1303, Karmann Ghias, and Type-3 models from 1969 onwards, this kit includes everything needed for a comprehensive wheel bearing replacement. Whether you’re restoring a classic or maintaining your daily driver, this kit ensures a smooth and reliable ride.

The kit contains two bearings, two oil seals, an O-ring, a circlip, and a split pin, providing a complete solution for your vehicle's IRS rear suspension.

Compatible Vehicles: - Beetle Australia (1971,1972,1973,1974,1975,1976) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 924,944,Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3

113-598-071/R/BQ – Wheel Bearing Kit, Rear for IRS

Description:

Best quality rear wheel bearing kit, For IRS rear suspension.

Kit includes: 2x bearings, 2x oil seals, 1x O-ring, 1x circlip and 1x split pin. For IRS rear suspension.

Additional Vehicle Info: 924,944,Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3

113-598-071/RF – Wheel Bearing Kit, Rear for IRS

Description:

Rear wheel bearing kit, For IRS rear suspension.

Kit includes: 2x bearings, 2x oil seals, 1x O-ring, 1x circlip and 1x split pin. For IRS rear suspension.

Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-601-151/GEN – Domed Hubcap in Chrome, Genuine VW

Description:

Genuine VW part with stamped logo and high-quality chrome finish
Fits pre-'65 Beetles, pre-'67 Split Screens & pre-'70 VW Buses
Perfect for restorations or replacing worn original hubcaps

This genuine VW chromed hubcap is a factory-original part, now available again for classic Volkswagen enthusiasts. Designed to fit pre-1965 Beetle Saloons, pre-1967 Split Screen vans, and pre-1970 VW Buses, it features the iconic VW logo stamped into a durable, high-quality chrome finish for an authentic look.

Ideal for restorers aiming for a factory-fresh appearance or simply replacing tarnished hubcaps, this part delivers both style and precision. Whether you're preserving originality or enhancing your classic VW’s aesthetic, this hubcap is a must-have detail for any discerning build.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:The inside diameter is 243mm (24.3cm) Outside diameter is 280mm (28cm) Depth of the Hub Cap is 80mm (8cm)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

113-609-125/G / – Front Drum Backing Plate Left or Right

Description:

Front brake backing plate for drum brakes to fit either the left or right side. This will fit all Beetles from 1966-1979 excluding 1302 and 1303 models.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-609-163/ / – Rubber Inspection Bung for Brake Backing Plate

Description:

Allows easy access for brake adjustments and inspections
Stops brake contamination
Perfect fit for 14mm backing plate holes

This rubber inspection and adjustment bung is designed to perfectly fit 14mm brake backing plate holes on . Made from high-quality, durable rubber, this bung allows easy access for brake adjustments and inspections.

Commonly missing on most brake backing plates, and when they are, mud and dirt will get into the braking system and create big problems.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Quantities required:
Beetle - Front x 8, Rear x 8
Baywindow - Rear x 6
T25 - Rear x 2
Type 3 - Rear x 8
924 - Rear x 8

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-609-205/A – Brake Shoe Star Adjuster

Description:

Used for adjusting brake shoes
Supplied individually
Fits front or rear on all drum brakes

This brake shoe star adjuster nut is essential for the precise adjustment of brake shoes. It is supplied individually and can be used on both front and rear drum brakes across various vehicle models. For optimal performance and ease of installation, it is recommended to apply copper grease when fitting the adjuster nut.

Recommended to change with adjuster screw 211-609-209/A on T2 or 131-609-209 on all other applications.

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

113-609-439/C – Rear Brake Backing Plate Left

Description:

Rear backing plate for drum brakes to fit the left side. This is the mounting plate that the brake shoes and brake cylinders mount too.

Compatible Vehicles: - Beetle (1964,1965,1966,1967) - Beetle Cabrio (1964,1965,1966,1967) - Karmann Ghia (1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-609-439/E / – Brake Backing Plate Rear Left

Description:

Designed for left side, compatible with drum brake systems
Essential for mounting brake shoes and wheel cylinders securely
Durable construction to withstand exposure to elements

Replace your worn-out rear brake backing plate with this high-quality left-side component, specifically designed for drum brake systems. This part is crucial for securely attaching your brake shoes and wheel cylinders, ensuring optimal performance and safety.

Given that backing plates are often exposed to the elements, they tend to rust heavily over time. Our backing plate offers robust durability to resist corrosion, providing a reliable solution for your braking system. Restore your vehicle's braking efficiency with this essential part, designed to last and enhance your driving experience.

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia

113-609-440 – Rear Brake Backing Plate Right

Description:

Rear brake backing plate for the right side. This is the mounting plate that the brake shoes and brake cylinders mount too.

Compatible Vehicles: - Beetle (1954,1955,1956,1957)

Additional Vehicle Info: Beetle

113-609-440/C – Rear Brake Backing Plate Right

Description:

Rear backing plate for the right side. This is the mounting plate that the brake shoes and brake cylinders mount too.

Compatible Vehicles: - Beetle (1964,1965,1966,1967) - Beetle Cabrio (1964,1965,1966,1967) - Karmann Ghia (1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-609-440/E / – Brake Backing Plate Rear Right

Description:

Designed for right side, compatible with drum brake systems
Essential for mounting brake shoes and wheel cylinders securely
Durable construction to withstand exposure to elements

Replace your worn-out rear brake backing plate with this high-quality right-side component, specifically designed for drum brake systems. This part is crucial for securely attaching your brake shoes and wheel cylinders, ensuring optimal performance and safety.

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia

113-609-613/A – Handbrake Lever Arm, Left

Description:

Handbrake lever arm, left.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-609-614/A – Handbrake Lever Arm, Right

Description:

Handbrake lever arm, right.

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-609-625 – Rear Brake Spring Retaining Clip

Description:

Secures brake shoe spring to handbrake cross bar
Reduces noise & maintains correct spring tension
Made from spring steel – ideal for restorations

This brake spring retaining clip is a vital component in your classic VW’s rear brake setup, helping to maintain proper spring tension between the shoes and reduce unwanted noise. Often missing or corroded, it should be checked and replaced as part of any brake maintenance schedule.

Manufactured from correct-spec spring steel, this clip is an excellent reproduction for restorations or repairs. It secures the brake shoe spring to the handbrake cross bar, ensuring reliable operation and consistent brake performance. A small but essential part for keeping your braking system in top condition.

Compatible Vehicles: - Beetle (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-609-637 – Handbrake Cable Retaining Bracket, Left

Description:

Handbrake cable retaining bracket for the left side. Supplied each. This part holds the handbrake cable to the backing plate.

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-609-638 – Handbrake Cable Retaining Bracket, Right

Description:

Handbrake cable retaining bracket for the right side. Supplied each. This part holds the handbrake cable to the backing plate.

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-609-721 – Handbrake Cable

Description:

Handbrake cable to fit the left and right side. To fit models without lever shocks.

Will fit Beetle models from 1951-'55 starting with chassis number 244003.

Compatible Vehicles: - Beetle (1951,1952,1953,1954,1955) - Beetle Cabrio (1951,1952,1953,1954,1955)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-609-721/B – Handbrake Cable

Description:

Handbrake cable to fit the left and right side. Supplied individually.

Will fit Beetle models from 1956-'57.

Compatible Vehicles: - Beetle (1956,1957) - Beetle Cabrio (1956,1957)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-609-721/F / – Handbrake Cable

Description:

Handbrake cable to fit the left and right side. Supplied individually.

Will fit Beetle models from 1958-'64.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964) - Karmann Ghia (1960,1961,1962,1963,1964)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-609-721/J / – Handbrake Cable, IRS

Description:

Fits left or right side – sold individually
For IRS suspension Beetles incl. 1302 & semi-auto
530mm conduit | 1819mm overall cable length

This handbrake cable is designed to fit both the left and right sides of VW Beetles with Independent Rear Suspension (IRS), including 1302 models and semi-automatic Beetles from 1968 to 1972.

With a 530mm conduit and a total cable length of 1819mm, it ensures a correct and secure fit for your classic VW. Manufactured to high standards for smooth operation and durability, it's an ideal replacement for worn or stretched original cables.

Compatible Vehicles: - Beetle (1970,1971,1972) - Beetle Cabrio (1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-609-721/L / – Handbrake Cable

Description:

Fits both left and right sides, sold individually
Designed for 1965–1967 model vehicles
Conduit: 535mm | Cable: 1789mm

Ensure reliable and responsive braking with this high-quality handbrake cable, engineered to match the original specifications for vehicles from 1965 to 1967. With a 535mm conduit and a total cable length of 1789mm, it offers the correct fit and function for your restoration or repair needs.

This cable is compatible with both the left and right sides of your vehicle, though each side is supplied separately. Built for durability and ease of installation, it’s a smart solution to restore your classic car's handbrake performance.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-609-721/M / – Handbrake Cable, Swing Axle

Description:

Fits both left and right sides of the vehicle
500mm conduit length for proper fitment
Sold individually; two required per car

This Handbrake Cable is designed to fit 1968-1972 VW models with swing axle suspension. Perfect for restoring your vehicle's braking system, this cable works on both the left and right side, ensuring reliable handbrake function. With a 500mm conduit length, it provides the ideal length for smooth operation and proper fitment.

Sold individually, two cables are required per car for full replacement. Please note, this cable is not compatible with 1302 models. If you're restoring or replacing handbrake cables, this high-quality part ensures the safety and reliability of your vehicle’s braking system.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972) - Beetle Cabrio (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972)

Notes:

Full length 1780mm. Conduit 520mm long.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-015/BD – Brake Master Cylinder Dual Circuit for Left Hand Drive

Description:

Designed for left-hand drive vehicles
Supplied with inlet plugs and pipes
Essential for maintaining brake system integrity

Forst offers an affordable, high-quality dual circuit master cylinder designed specifically for left-hand drive models. This master cylinder comes with all the necessary inlet plugs and pipes for easy installation, providing a reliable solution for maintaining your vehicle's braking system.

While it does not include the brake light switch, this master cylinder ensures safe and efficient brake performance, making it a perfect replacement part for restorations or routine maintenance.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974)

Notes:

12mm/24mm Inlet rubber 357-611-817

12mm inlet pipe 113-611-153/C

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker

113-611-015/BD/ATE – Brake Master Cylinder Dual Circuit for Left Hand Drive

Description:

Designed for left-hand drive vehicles
Supplied with inlet plugs and pipes
Best quality German ATE or FTE product
Essential for maintaining brake system integrity

High-quality dual circuit master cylinder designed specifically for left-hand drive models. This master cylinder comes with all the necessary inlet plugs and pipes for easy installation, providing a reliable solution for maintaining your vehicle's braking system.

While it does not include the brake light switch, this master cylinder ensures safe and efficient brake performance, making it a perfect replacement part for restorations or routine maintenance.

Notes:

12mm/22mm Inlet rubber 357-611-817

12mm inlet pipe 113-611-153/C

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-015/BH – Brake Master Cylinder Dual Circuit for Left Hand Drive 1302/3

Description:

Designed for left-hand drive 1302/1303 models
Supplied with inlet plugs and pipes
Essential for maintaining brake system integrity

While it does not include the brake light switch, this master cylinder ensures safe and efficient brake performance, making it a perfect replacement part for restorations or routine maintenance.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:For 1302 or 1303 models only.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-021/C / – Brake Master Cylinder Single Circuit

Description:

Fits both left and right-hand drive models
Top inlet plug and brake light switch not included
Affordable and high-quality replacement
Essential for maintaining brake system integrity

Forst presents a quality, affordable single circuit master cylinder suitable for both left and right-hand drive models. This master cylinder is designed to provide reliable braking performance and durability.

Please note that the top inlet plug and brake light switch are not included, so ensure you have these components or order them separately. This master cylinder is a practical solution for maintaining or restoring your vehicle's braking system.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964) - Karmann Ghia (1960,1961,1962,1963,1964)

Notes:Requires 113-611-817 plug or 211-611-817/A depending on size of pipe you are using.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-021/C/ATE – Brake Master Cylinder, Single Circuit

Description:

Includes top inlet plug; brake light switch not included
Reliable braking performance for single circuit systems
Essential for maintaining brake system integrity

Ensure optimal braking performance with our single circuit brake master cylinder. This high-quality component comes with the top inlet plug included, but please note that the brake light switch is not provided. It’s designed to meet the needs of single circuit brake systems, making it a dependable choice for your vehicle.

Perfect for maintaining or repairing your braking system, this master cylinder offers reliable functionality and ease of installation. Its durable construction ensures long-lasting performance, helping you keep your vehicle safe and road-ready.

Notes:Requires 113-611-817 plug and 113-611-153 pipes

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-023/B / – Brake Master Cylinder Single Circuit

Description:

Fits both left and right-hand drive models
Top inlet plug and brake light switch not included
Affordable and high-quality replacement
Essential for maintaining brake system integrity

Compatible Vehicles: - Beetle (1964,1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-023/B/ATE – Brake Master Cylinder, Single Circuit

Description:

Reliable single circuit brake performance
Note: Brake light switch not included
Durable construction for long-lasting use

Upgrade your braking system with our single circuit brake master cylinder. This high-quality component ensures reliable brake performance, providing the essential functionality for your vehicle’s braking needs.

Please note that the brake light switch is not included with this master cylinder. Designed for durability and long-term use, this part is a dependable choice for maintaining your vehicle’s braking efficiency and safety.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-053/B / – Brake Wheel Cylinder Rear

Description:

High-quality, affordable brake component
Sold individually, Replace in pairs for best results
Fits Beetle & Ghia 67>>

Ensure your vehicle's safety with another quality, affordable product from FORST. This rear wheel cylinder is sold individually, with two required per car. We always recommend replacing brake parts in matched pairs to maintain optimal performance.

When it comes to brake parts, we strive to stock the best quality available – parts you can trust. Regularly checking your brake cylinders is crucial; a leak can reduce braking force or, in the worst case, cause complete brake failure. By identifying a leak early, you can prevent damage to your brake shoes and save on costly repairs.

Notes:All 68- Beetle models including 1302 and 1303.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-053/B/ATE – Rear Wheel Brake Cylinder

Description:

Essential for vehicle safety
Resolves spongy brake pedal
Good quality replacement part

Wheel brake cylinders are a critical component of your vehicle's braking system, crucial for ensuring overall safety. If you notice symptoms like a spongy brake pedal, poor brake response, or fluid leaking near the wheels, it may indicate that your wheel brake cylinders are worn out and need replacing.

Replacing a faulty rear wheel brake cylinder is vital to restore optimal braking performance and maintain vehicle safety. Our good quality replacement cylinders effectively address these issues, ensuring reliable and efficient brake operation. Trust our premium parts to keep your vehicle in top condition and safe on the road.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-053/B/TRW – Rear Wheel Brake Cylinder

Description:

Essential for vehicle safety
Resolves spongy brake pedal
High-quality replacement part

Replacing a rear wheel brake cylinder is vital to restore optimal braking performance and maintain vehicle safety. Our high-quality replacement cylinders effectively address these issues, ensuring reliable and efficient brake operation. Trust our premium parts to keep your vehicle in top condition and safe on the road.

Vehicle fitments
Beetle 08/67-79 including 1302 and 1303 models
Karmann Ghia 08/67-74

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Trekker (1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker

113-611-053/R – Brake Wheel Cylinder Rear

Description:

Another quality affordable product from FORST, Rear wheel brake cylinder, left or right. Sold individually but we recommend replacing in pairs.

If your vehicle is displaying any of the following symptoms, spongy brake pedal, poor brake response, or fluid leaking underneath the car by the wheels it could be a sign that the wheel cylinders have come to the end of their life and need replacing.

Compatible Vehicles: - Beetle (1953,1954,1955,1956,1957) - Beetle Cabrio (1953,1954,1955,1956,1957)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-055. – Brake Wheel Cylinder, Front

Description:

Front wheel brake cylinder.

Wheel brake cylinders are a part of the braking system, they are important to the overall safety of the vehicle.
If your vehicle is displaying any of the following symptoms, spongy brake pedal, poor brake response, or fluid leaking underneath the car by the wheels it could be a sign that the wheel cylinders have come to the end of their life and need replacing.

Compatible Vehicles: - Beetle (1953,1954,1955,1956,1957) - Beetle Cabrio (1953,1954,1955,1956,1957)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-055/C – Brake Wheel Cylinder Rear

Description:

High-quality, affordable brake component
Includes bleed nipple and dust cap
Fits Beetle 58-64 & Ghia 60-64

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964) - Karmann Ghia (1960,1961,1962,1963,1964)

Notes:Fits models from October 1957 to July 1964.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-055/C/ATE – Rear Wheel Brake Cylinder

Description:

Essential for vehicle safety
Resolves spongy brake pedal
Good quality replacement part

Replacing a faulty rear wheel brake cylinder is vital to restore optimal braking performance and maintain vehicle safety. These good-quality replacement cylinders effectively address these issues, ensuring reliable and efficient brake operation. Trust our premium parts to keep your vehicle in top condition and safe on the road.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964) - Karmann Ghia (1960,1961,1962,1963,1964)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-055/C/TRW – Brake Wheel Cylinder, Rear

Description:

Compatible with models from 1958-1964
Direct fit for rear wheel brake system
Durable construction for reliable performance

This rear wheel brake cylinder is designed to fit vehicles manufactured between October 1958 and 1964. It ensures optimal braking performance, providing safety and durability for your vehicle.

Crafted with high-quality materials, this part is built to last. It's a perfect replacement for older, worn-out brake cylinders, keeping your vehicle's braking system functioning smoothly and efficiently.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964) - Karmann Ghia (1958,1959,1960,1961,1962,1963,1964)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-055/R – Brake Wheel Cylinder Front

Description:

Another quality affordable product from FORST, Front wheel brake cylinder, left or right. Sold individually but we recommend replacing in pairs.

Compatible Vehicles: - Beetle (1953,1954,1955,1956,1957) - Beetle Cabrio (1953,1954,1955,1956,1957)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-057/B – Brake Wheel Cylinder Front

Description:

High-quality, affordable brake component
Sold individually, Replace in pairs for best results
Fits models from October 1957-1979

Ensure your vehicle's safety with another quality, affordable product from FORST. This front wheel cylinder is sold individually, with two required per car. We always recommend replacing brake parts in matched pairs to maintain optimal performance.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-057/B/ATE – Front Brake Wheel Cylinder

Description:

Front wheel brake cylinder.

Fits models from October 1957 to 1979

Wheel brake cylinders are a part of the braking system, they are important to the overall safety of the vehicle.
If your vehicle is displaying any of the following symptoms, spongy brake pedal, poor brake response, or fluid leaking underneath the car by the wheels it could be a sign that the wheel cylinders have come to the end of their life and need replacing.

These will be supplied as an FTE, or ATE brand dependent on what the supplier has in stock at our time of ordering. All of which are a top quality item

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-057/B/TRW – Front Wheel Brake Cylinder

Description:

Essential for vehicle safety
Resolves spongy brake pedal
High-quality replacement part

Replacing a faulty front wheel brake cylinder is vital to restore optimal braking performance and maintain vehicle safety. Our high-quality replacement cylinders effectively address these issues, ensuring reliable and efficient brake operation. Trust our premium parts to keep your vehicle in top condition and safe on the road.

Compatible Vehicles: - Beetle (1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

113-611-153 – Brake Master Cylinder Feed Pipe, 7mm

Description:

7mm diameter pipe
Connects to master cylinder
Check size before ordering

This brake master cylinder feed pipe has a 7mm diameter and is designed to deliver brake fluid from the reservoir to the master cylinder. It's important to check the size of your existing pipe before ordering to ensure a proper fit. Ideal for replacements during brake system maintenance.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971) - Beetle Cabrio (1967,1968,1969,1970,1971) - Karmann Ghia (1967,1968,1969,1970,1971)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-153/C – Brake Master Cylinder Feed Pipe 12mm

Description:

12mm feed pipe
Fits top of master cylinder
Supplied individually

Ensure your braking system functions optimally with our 12mm feed pipe for the top of the master cylinder. This pipe is designed to fit precisely, but you will need to check the dimensions of your existing part to ensure compatibility. Supplied individually, this feed pipe is essential for maintaining the integrity of your vehicle's braking system.

For best results, use this feed pipe with the 7mm pressure hose N02-035-01. This combination ensures a secure and reliable connection, providing the performance you need for safe driving. Upgrade your vehicle with this high-quality feed pipe for enhanced braking efficiency.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-611-195/B – Brake Master Cylinder Rubber Boot

Description:

Shields against dust and debris
Flexible rubber construction
Helps extend component life

This protective rubber boot fits over the brake master cylinder to help keep out dirt, moisture, and debris. Made from flexible, durable rubber, it helps protect internal components and maintain smooth operation. Ideal for replacements during brake system servicing.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Part number for this boot is correct for model year 1967 but Can also be made to fit on the earlier master cylinder as this part is not available.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

113-611-301/B – Brake Fluid Reservoir

Description:

Another quality affordable product from FORST, Brake fluid reservoir. This is the 1 bolt style reservoir. It is not supplied with the reservoir rubber cap.

Compatible Vehicles: - Beetle (1957,1958,1959,1960) - Beetle Cabrio (1957,1958,1959,1960)

Notes:Rubber cap sold separately: 113-611-373

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-301/G / – Brake Fluid Reservoir

Description:

Square reservoir fits in spare wheel well
Located under the front bonnet
Supplied complete with cap

This square-type brake fluid reservoir is designed to fit under the front bonnet in the spare wheel well of classic VW models. It serves as a direct replacement for the original unit and maintains correct fluid levels for safe braking performance.

Supplied with a matching cap, this reservoir is ready to install and ideal for restorations or brake system maintenance. Clean, functional, and true to original fitment.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966) - Beetle Cabrio (1961,1962,1963,1964,1965,1966) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-301/H – Brake Fluid Reservoir

Description:

Brake fluid reservoir. This is for 1967 models only. It includes a vented cap and metal outlet.

This reservoir can also be fitted to pre 1967 models when upgrading to dual circuit brakes. The mounting strap/bracket will need to be fabricated as we do not supply one and the hole in front panel enlarging.

Compatible Vehicles: - Beetle (1967)

Additional Vehicle Info: Beetle

113-611-301/L / – Brake Fluid Reservoir

Description:

Designed for dual circuit brake systems
Supplied with a cap for convenience
Quality and affordable replacement

Forst delivers another reliable, affordable solution with this brake fluid reservoir designed for dual circuit brake systems. Supplied with a cap, it offers a complete package to ensure easy installation and optimal performance.

This reservoir is a perfect replacement part for maintaining your vehicle’s braking system, providing durability and compatibility for dual circuit setups. Ideal for restorations and upgrades, trust Forst for quality you can count on.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-611-373 – Cap for Brake Fluid Reservoir

Description:

Another quality product from SSP,Rubber cap for the early metal brake fluid reservoir.

Compatible Vehicles: - Beetle (1953,1954,1955,1956,1957,1958,1959,1960) - Beetle Cabrio (1953,1954,1955,1956,1957,1958,1959,1960) - Karmann Ghia (1960) - T2 Split Bus (1955,1956,1957,1958,1959,1960)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split

113-611-381 – Filter for the Brake Fluid Reservoir

Description:

Filter for the top of the brake fluid reservoir. This filter is to prevent dirt entering the brake system. It fits under the brake fluid reservoir cap.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

113-611-399/A – Pad for Brake Fluid Reservoir

Description:

Brake fluid reservoir pad. This locates below the below the reservoir. It cushions the pot and catches any accidental spills.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle

113-611-475 – Bleed Nipple for Brake Cylinder M6

Description:

Bleed Nipple for Wheel Cylinders M6X1 38mm

Additional Vehicle Info: Beetle,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Scirocco

113-611-701 – Brake Hose, Drum Brakes, 470mm, Front

Description:

470mm length for a precise fit
Male and female end fittings for drum brakes

Rejuvenate your drum brake system with our 470mm front brake hose. Featuring secure male and female end fittings, it provides a reliable and efficient connection specifically for drum brakes.

Constructed from quality materials, this brake hose ensures optimal brake fluid transfer and durability. rejuvenate your vehicle’s braking performance and safety with this essential component.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

113-611-701/D – Brake Hose, Drum Brakes, 380mm, Front

Description:

380mm length for precise fit
For drum brakes with male and female fittings

Optimize your drum brake system with our 380mm front brake hose. Designed with both male and female end fittings, it ensures a secure and efficient connection, providing reliable performance.

Crafted for durability, this brake hose enhances the safety and responsiveness of your drum brakes. Trust it to deliver consistent brake fluid transfer, keeping your vehicle's braking system in top condition.

Additional Vehicle Info: 356,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

113-611-701/DF – Brake Hose 380mm for Drum Brakes - Front

Description:

Another quality affordable product from FORST, Front brake hose with male and female ends for drum brakes.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-701/F – Brake Hose 470mm for Drum Brakes - Front

Description:

Another quality affordable product from FORST, Front brake hose with male and female ends for drum brakes.

Additional Vehicle Info: Beetle,Beetle Cabriolet

113-611-715/A / – Brake Hose Retaining Clip

Description:

Secures flexi brake hose to mounting bracket
Supplied individually, 6 required
Ensures a secure, stable brake hose connection

This brake hose retaining clip is designed to securely mount the flexible brake hose to its bracket, ensuring a firm and reliable connection. Sold individually, it's an essential component for maintaining proper brake hose alignment and preventing movement that could cause wear or damage.

Ideal for brake system maintenance or repairs, this clip is a simple yet crucial part of ensuring safe and effective braking performance.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995) - 993 (1994,1995,1996,1997,1998) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Beetle - 6 required
Karmann Ghia - 6 required

Additional Vehicle Info: 356,911,912,914,924,928,930,944,964,968,993,Beetle,Beetle Cabriolet,Golf Mk1,Karmann Ghia,T2 Bay,T2 Split,Type 3