Fitment #69

211-415-939 – Washer for use on Various Applications

Description:

Retaining Washer, used on various applications across the VW range

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-425-021/A / – Steering Damper for Front Beam

Description:

High-quality SSP reproduction of the original design
Improves steering control and reduces vibrations
Perfect replacement for enhanced driving comfort

This original style steering damper from SSP is an excellent reproduction of the factory part, designed to fit both left and right-hand drive vehicles. A perfect replacement at a great price, it helps to significantly improve steering control by reducing unwanted vibrations.

By replacing your old, worn-out damper, you'll experience a smoother, more enjoyable driving experience. This damper plays a key role in enhancing vehicle handling and stability, making your ride safer and more comfortable.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:May not be suitable for some narrowed beams.

Additional Vehicle Info: T2 Bay,T2 Split

211-425-021/AG – Steering Damper for Front Beam

Description:

Steering damper for front beam.
May not be suitable for some narrowed beams.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:M10X40 bolt required for fitting N01-044-03

Additional Vehicle Info: T2 Bay,T2 Split

211-498-041 – Link Pin Kit

Description:

Link pin kit for Splitscreen models from 1955 to July 1962. This is a complete kit and includes everything you will require.

Kit Includes:
4x 20mm Link pins
4x Needle Bearings
4x Caps
4x Spacers
4x Rubber Washers
4x Seals
4x Washers
Shims

Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962)

Notes:

Fits Splitscreen up to chassis 999 304 (July 1962)

**PLEASE NOTE 1963 MODELS (August 1962 - July 1963) USE A ONE YEAR ONLY KING PIN THAT IS NO LONGER AVAILABLE**

Additional Vehicle Info: T2 Split

211-498-041/B – Link Pin Kit

Description:

Complete 22mm link pin kit with all essential components
Includes pins, bearings, seals, shims, and caps
1 kit required per van for easy installation

This comprehensive 22mm link pin kit provides everything you need for seamless installation. Each kit includes pins, bearings, seals, shims, and caps, ensuring a complete solution. Designed for convenience, it only takes one kit to fit a van, making your repair process faster and easier.

Heritage kits are crafted to save you both time and money. With all necessary parts included, you eliminate the hassle of sourcing individual components, ensuring a smooth, efficient installation.

Compatible Vehicles: - Brazil Kombi (2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1964,1965,1966,1967)

Notes:

Fits Splitscreen from chassis 1 144 282 (July 1963)

**PLEASE NOTE 1963 MODELS (August 1962 - July 1963) USE A ONE YEAR ONLY KING PIN THAT IS NO LONGER AVAILABLE**

Additional Vehicle Info: Brazil Kombi,T2 Split

211-498-071 – Front Wheel Bearing Kit

Description:

Includes inner and outer bearings
Comes with hub seal
2-year guarantee

Meyle front wheel bearing kit ensures top-notch performance with their true-to-OE quality. This kit includes inner and outer bearings and a hub seal, providing all the necessary components for a straightforward installation.

Designed for durability and reliability, this bearing kit comes with a 2-year guarantee, offering peace of mind and long-lasting performance. Invest in our high-quality kit to keep your vehicle running smoothly and safely.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-071/BQ – Front Wheel Bearing Kit

Description:

Top-quality parts
Ensures smooth wheel operation
Durable and reliable performance

This convenient front wheel bearing kit contains all the top-quality parts required to service one front wheel. Designed for ease of use, it includes everything you need to ensure smooth and reliable wheel operation.

All parts used in this kit are top-quality to guarantee durability and optimal performance, making it an essential choice for maintaining your vehicle's safety and efficiency. Trust our front wheel bearing kit to keep your vehicle running smoothly and securely.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-071/F – Wheel Bearing Kit, Front

Description:

Complete kit for servicing one front wheel
Includes all necessary parts for easy installation
Helps extend wheel life and performance

This front wheel bearing kit provides everything needed to maintain one front wheel, ensuring smooth operation and durability. Designed for convenience, it simplifies the repair process by including all essential components in one package.

Heritage kits offer a cost-effective solution, helping you save both time and money. With quality parts made to fit, this kit makes wheel maintenance straightforward and hassle-free.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-101/A – Anti Roll Bar Front Mounting Kit

Description:

Complete front anti-roll bar overhaul kit for both sides
Thicker metal clamps for enhanced durability
Improves stability and reduces body roll

This front anti-roll bar mounting kit provides everything needed to overhaul both sides of your anti-roll bar system. Designed to improve handling and reduce body roll, the kit includes durable components that ensure a secure fit and long-lasting performance.

The clamps in this kit are made from thicker metal than many other reproduction options, offering superior strength and durability. This makes the kit ideal for anyone looking to upgrade their suspension system with high-quality, long-lasting parts that enhance both stability and control.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-101/A/SS – Anti Roll Bar Front Mounting Kit

Description:

Complete front anti-roll bar mounting kit for both sides.
Black powder-coated clamps for enhanced durability.
Includes all parts for a full anti-roll bar overhaul.

This front sway bar mounting kit is designed for a complete overhaul of both sides of your Anti-Roll Bar system. It includes durable, black powder-coated clamps, ensuring both superior corrosion resistance and a sleek appearance, along with all necessary components for a secure and lasting installation.

Engineered for optimal performance, this kit provides the essential parts to improve handling and stability by reducing sway and body roll. With its tough, long-lasting construction, this mounting kit is the perfect solution for maintaining or upgrading your suspension system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-101/AR – Anti-Roll Bar Front Mounting Kit

Description:

Complete front anti-roll bar mounting kit for one side.
Includes bush, large/small brackets, and hardware.
Ensures secure fitment and improved handling.

This front anti-roll bar mounting kit includes everything needed to restore or upgrade one side of your anti-roll bar system. The kit comes with a high-quality bush, large and small brackets, and all necessary fitting hardware for a straightforward installation.

Designed for durability, this kit ensures a secure and reliable fit, reducing body roll and enhancing vehicle stability. Perfect for maintaining or improving suspension performance, it provides the essential components to keep your front anti-roll bar functioning at its best.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-101/L – Front Anti-Roll Bar Mounting Kit

Description:

Front anti roll bar mounting kit, including the rubber bush and ARB clamp, left.

Compatible Vehicles: - T2 Split Bus (1965,1966,1967)

Additional Vehicle Info: T2 Split

211-498-101/SET – Front Anti-Roll Bar Mounting Kit

Description:

Anti Roll bar mounting kit. Complete for left and right hand side

Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-498-102. – Front Anti-Roll Bar Mounting Kit right

Description:

Right hand side Anti roll bar mounting kit. Clamp and bush included.

Compatible Vehicles: - T2 Split Bus (1965,1966,1967)

Additional Vehicle Info: T2 Split

211-498-171. – Steering Idler Pin Kit

Description:

Complete kit for effective steering idler arm repairs
Includes pin, bushes, shims, and seals for lasting quality
Simplifies your steering system maintenance

Keep your vehicle's steering system in top shape with our Steering Idler Arm Repair Kit. This comprehensive kit includes all the essential components: a sturdy pin, durable bushes, precision shims, and reliable seals.

Designed for easy installation, this kit helps you maintain smooth steering performance. Ensure your vehicle handles well and stays safe on the road with these high-quality replacement parts.

Compatible Vehicles: - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:The bushes need pressing into beam and reamed when fitting.

Additional Vehicle Info: Brazil Kombi,T2 Split

211-498-171/A – Steering Idler Pin Kit

Description:

Complete kit for effective steering idler arm repairs
Includes pin, bushes, shims, and seals for lasting quality
Simplifies your steering system maintenance

Designed for easy installation, this kit helps you maintain smooth steering performance. Ensure your vehicle handles well and stays safe on the road with these high-quality replacement parts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-371 – Front Trailing Arms & Anti Roll Bar Overhaul Kit

Description:

Front suspension overhaul kit for trailing arms & anti-roll bar
Includes ball joints, seals, clamp kits, and hardware
Heritage kits: save time and money on repairs

Restore your vehicle’s front suspension with our comprehensive overhaul kit, designed specifically for front trailing arms and the anti-roll bar. This kit includes everything you need: four ball joints, four torsion arm seals, two anti-roll bar clamp kits, and all necessary grub screws and nuts.

Our heritage kits are crafted to streamline your repair process, offering a cost-effective solution without compromising on quality. Trust in these reliable components to enhance your vehicle's performance and longevity.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-498-373 – King and Link Pin Set

Description:

Includes all necessary parts for a full overhaul
Fits Splitscreen models with chassis 999 305 >> 1 144 281
22mm specification

This comprehensive king and link pin set is designed to overhaul the suspension system of Splitscreen models from August 1962 to July 1963. It includes all the components required to refresh and maintain the integrity of your king and link pins, ensuring smooth and reliable steering performance.

With a 22mm specification, this set is tailored for specific chassis numbers starting from 999 305 >> 1 144 281, providing a precise fit for your vehicle. Ideal for restoring your Splitscreen’s front suspension to its original condition.

Compatible Vehicles: - T2 Split Bus (1962,1963) - T2 Split USA (1962,1963)

Additional Vehicle Info: T2 Split

211-498-374 – King and Link Pin Set

Description:

Includes all necessary parts for a full overhaul
Fits Splitscreen models with chassis 1 144 282 >>
22mm specification

This comprehensive king and link pin set is designed to overhaul the suspension system of Splitscreen models from August 1963 to July 1967. It includes all the components required to refresh and maintain the integrity of your king and link pins, ensuring smooth and reliable steering performance.

With a 22mm specification, this set is tailored for specific chassis numbers starting from 1 144 282 onwards, providing a precise fit for your vehicle. Ideal for restoring your Splitscreen’s front suspension to its original condition.

Compatible Vehicles: - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1964,1965,1966,1967) - T2 Split USA (1963,1964,1965,1966,1967)

Additional Vehicle Info: Brazil Kombi,T2 Split

211-498-625/BQ – Front Wheel Bearing Kit

Description:

Best Quality front wheel bearing kit.

This convenient kit contains all the top quality parts required to service one front wheel.

Two kits required per axle.

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967) - T2 Split USA (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-498-625/F – Front Wheel Bearing Kit

Description:

Front wheel bearing kit.

This convenient kit contains all the parts required to service one front wheel.

Two kits required per axle.

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-498-627/BQ – Front Wheel Bearing Kit

Description:

Best quality front wheel bearing kit.

This convenient kit contains all the top quality parts required to service one front wheel.

Two kits required per axle.

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-498-627/F – Front Wheel Bearing Kit

Description:

Front wheel bearing kit.

This convenient kit contains all the parts required to service one front wheel.

Two kits required per axle.

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-499-121/B – Front Axle Mounting Bolt

Description:

Front axle mounting bolt. 8 required to fit the axle. Sold individually.
May not be suitable for all later Bays.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Brazil Kombi,T2 Bay,T2 Split

211-501-121 – Rear Trailing Arm Inner Pivot Bush - IRS

Description:

Maintains correct rear suspension geometry
Reduces knocking and uneven tyre wear
Essential for safe, stable handling

This rubber bush fits the inner pivot of the IRS trailing or radius arm on your T2. Often overlooked, it plays a crucial role in maintaining proper suspension alignment and ride quality. A worn bush can lead to rear-end knocking, poor camber alignment, and accelerated tyre wear.

Replacing this bush restores stability and handling, ensuring your T2 drives as it should. It's a small part with a big impact on comfort, safety, and long-term suspension health.

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-501-137 – Wavy Washer M14, For spring plate bolts

Description:

Blackened stainless steel for superior durability
Secures spring plate to A-arm bolts reliably
Essential for VW T2 Bay rear suspension restoration

Upgrade your rear suspension setup with the M14 Wavy Washer — a premium replacement for the standard part. Crafted from blackened stainless steel, these washers are built to resist corrosion and wear, ensuring long-term performance even under demanding conditions.

Perfect for full or partial restorations of VW T2 Bay Window vans and buses, this washer plays a critical role in keeping the spring plate to A-arm bolts firmly in place. Whether you're maintaining originality or enhancing reliability, this component is a must-have for any serious VW enthusiast.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-501-149 – CV Boot

Description:

Protects CV joint from dirt and moisture
Flexible, durable rubber construction
Fits a wide range of vehicle models

This CV joint boot is designed to shield your constant velocity joint from contaminants and retain essential lubrication. Made from high-quality rubber, it offers flexibility and durability under demanding driving conditions, helping to extend the life of your drivetrain components.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:

We recommend replacing your spreader plates to ensure compatibility with these boots. New plates can be found under part number 211-501-357. 3 required per boot to fit.

You may also wish to replace the bolts as they can be difficult to remove intact. These can be found under part number 893-407-237. 6 bolts are used per joint.

Additional Vehicle Info: T25,T2 Bay

211-501-149/BQ – CV Boot

Description:

Durable CV boot for reliable axle protection
High-quality Meyle product with 2-year guarantee
Grease and fittings sold separately

This top-quality CV boot, manufactured by Meyle, provides long-lasting protection for your vehicle's constant velocity (CV) joint. Built to handle tough conditions, it ensures your axle stays safe from dirt, moisture, and debris. Designed for durability, this CV boot is backed by Meyle's 2-year guarantee, offering peace of mind and confidence in its performance.

Please note, grease and fittings are not included, allowing you to select the ideal components to suit your specific needs. Perfect for both DIY repairs and professional installations, this CV boot delivers exceptional quality at an affordable price.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

211-501-191 – Bump Stop Rear

Description:

Sold individually; two required per vehicle
Restores suspension performance
Designed to absorb shock and prevent suspension over-compression

This rear suspension bump stop is sold individually, with two required per car for full replacement. It is designed to absorb shock and prevent suspension over-compression, ensuring a smooth ride and protecting your vehicle’s components.

Made from high-quality materials, this bump stop is built for durability and long-term performance. It helps maintain proper suspension function by providing critical damping, reducing wear on your suspension system, and enhancing overall ride comfort.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Brazil Kombi,T2 Bay,T2 Split

211-501-203/V – Driveshaft Complete with CV Joints

Description:

Includes CV joints, gaiters, mounting bolts, spreader plates, and grease.
High-quality components for reliable performance.
Sold individually; 2 required per vehicle.

Revamp your vehicle's drivetrain with this complete driveshaft assembly, featuring all essential components: CV joints, gaiters, mounting bolts, spreader plates, and grease. Each part is crafted for durability and optimal performance.

Sold individually, you’ll need two per vehicle. This comprehensive kit ensures a hassle-free installation and dependable function, maintaining your vehicle’s smooth and efficient operation.

Notes:Not suitable for automatic gearbox models. If using these parts to complete an IRS conversion on a Splitscreen, the inner CV must be changed to 113-501-331/D.

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-501-221/1 – Rear Hub Castellated Nut 41mm Head

Description:

Rear hub castle nut. Each.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Brazil Kombi,T25,T2 Bay,T2 Split

211-501-221/A – Castle Nut - 46mm Head for Rear Hub

Description:

Heavy-duty rear hub fastener
46mm head for secure fitment
Ideal for classic vehicle restorations

This 46mm head castle nut is designed for securing rear hubs with strength and reliability. Perfect for classic car restorations or maintenance, it ensures proper torque retention and safety where it matters most.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:Supersedes N90-149-601 Can also use 211-501-221\/1

Additional Vehicle Info: T25,T2 Bay,T2 Split

211-501-249 – Reduction Box Housing Plug

Description:

Reduction box housing plug
(Now plastic, to replace original Metal plug)

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-253/E – Rear Axle Housing, Left

Description:

Fits left-hand side of the rear axle housing.
Built for durability and reliable performance.
Compatible with multiple vehicle models.

This rear axle housing is designed to fit the left-hand side of your vehicle. Made with durability in mind, it provides reliable performance under regular driving conditions. It’s a practical replacement or upgrade option for your vehicle's rear axle.

Compatible with a range of vehicle models, this part ensures an easy installation process. Whether you're addressing a repair or looking to maintain your vehicle's performance, this rear axle housing offers a solid and dependable solution.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-501-265 – Rear Stub Axle

Description:

Rear stub axle

Compatible Vehicles: - T2 Bay (1968,1969,1970)

Additional Vehicle Info: T2 Bay

211-501-265/C – Stub Axle, Rear

Description:

Perfect fit for Baywindow models from 08/1970-79.
Compatible with T25 1980-1992 vehicles.
Built to withstand rigorous driving conditions.

Enhance your vehicle's performance with our premium rear stub axle, specifically crafted for Baywindow models from chassis F 211 2000 001 and onwards (08/1970-79) and T25 1980-1992. This essential component ensures a reliable fit, helping you maintain the integrity of your vehicle’s suspension system.

Constructed with durability in mind, our rear stub axle is designed to endure various driving conditions, providing the strength and reliability you need. Upgrade your vehicle today for smoother handling and improved safety on the road.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

211-501-273. – Reduction Box Gasket

Description:

Reduction box gasket, sold separately

Compatible Vehicles: - T2 Split Bus (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-501-273/A – Reduction Box Gasket

Description:

Gasket for Reduction Box.

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-281/E – Spacer Sleeve for Rear Axle Housing

Description:

Fits inside rear axle housing between bearings.
Updated design with 5.4mm wall thickness.
Enhances bearing alignment and durability.

The Rear Axle Spacer Sleeve is an essential component for ensuring proper alignment and spacing between the inner and outer wheel bearings within the rear axle housing. This updated version features a robust 5.4mm wall thickness, providing enhanced durability and support for your vehicle's axle assembly.

Designed for precision fitment and long-lasting performance, this spacer sleeve helps maintain optimal bearing function and reduces wear and tear. Trust in our high-quality Rear Axle Spacer Sleeve to improve the reliability and longevity of your vehicle's rear axle system.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Brazil Kombi,T25,T2 Bay

211-501-283 – Wheel Bearing Rear Outer

Description:

Essential for vehicle safety
Smooth and reliable performance
Quality FORST manufacturing

The FORST outer rear wheel bearing is a vital component for your vehicle's rear wheel assembly, ensuring smooth and reliable performance. Proper functioning of the wheel bearings is crucial for maintaining overall vehicle safety and handling. If you experience unusual noises or vibrations from the rear wheels, it may be a sign that your wheel bearings need replacing.

Made with good quality materials, the FORST outer rear wheel bearing provides dependable durability and performance. Trust FORST to deliver exceptional parts that keep your vehicle running safely and efficiently on the road.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1964,1965,1966,1967)

Notes:Rear wheel bearing on the stub axle on Splitscreen vans. Rear outer axle bearing on Baywindow vans.

Additional Vehicle Info: Brazil Kombi,T2 Bay,T2 Split

211-501-283/BQ – Wheel Bearing, Rear Outer

Description:

Rear outer wheel bearing,

Used on the stub axle on Splitscreen models and the outer axle bearing on Baywindows.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Baywindow USA (1968,1969,1970) - T2 Split Bus (1964,1965,1966,1967) - T2 Split USA (1964,1965,1966,1967)

Additional Vehicle Info: T2 Bay,T2 Split

211-501-283/D – Wheel Bearing, Rear, Outer

Description:

Rear outer wheel bearing
Supplied individually
Designed for durability and performance

This rear outer wheel bearing is built for reliable performance and smooth operation. It helps maintain proper wheel function, reducing friction and wear over time.

Sold as a single unit, this bearing is ideal for replacements or repairs. It fits securely and supports consistent vehicle handling.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

211-501-283/D/BQ – Wheel Bearing Rear Outer

Description:

Rear outer wheel bearing

When wheel bearings become worn they will make a noticeable rumbling sound and the alignment of the wheel can be affected. It is essential to replace a worn wheel bearing before it is too late and cause damage to other components.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

211-501-285 – Reduction Box Upper Outer Bearing

Description:

The upper, outer bearing for the reduction box. 2 required per car.

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-285/BQ – Wheel Bearing, Reduction Box Best Quality

Description:

Upper/outer rear wheel bearing for the reduction box gear.

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-287 – Wheel Bearing, Rear, Inner

Description:

Rear inner wheel bearing
Supplied individually
Designed for durability and performance

This rear inner wheel bearing is built for reliable performance and smooth operation. It helps maintain proper wheel function, reducing friction and wear over time.

Sold as a single unit, this bearing is ideal for replacements or repairs. It fits securely and supports consistent vehicle handling.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Brazil Kombi,T25,T2 Bay

211-501-287/BQ – Wheel Bearing, Rear Inner Best Quality

Description:

Inner rear wheel bearing.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Brazil Kombi,T25,T2 Bay

211-501-293/A – Reduction Gear Locknut

Description:

Reduction box gear lock nut. 1 needed per side

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-303 – Rear Wheel Bearing Spacer Between Outer Bearing and Cover

Description:

Spacer between outer rear wheel bearing and bearing cover. For Splitscreen vans from 1964 to 1967. One required per side.

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-315 – Rear Wheel Bearing Housing Gasket

Description:

Gasket paper for rear wheel bearing housing, T1 swing axle or split van IRS

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

211-501-317 – Rear Hub Seal

Description:

Used for both inner and outer axle bearing seals
Sold individually, 2 seals required per hub
Essential for maintaining your vehicle’s axle bearings, preventing leaks

This rear radial hub shaft seal serves as a rear wheel bearing seal, designed to fit both the inner and outer axle bearings. Each hub requires two seals, one for the inboard and one for the outboard. It's also used on Split buses with IRS conversions, ensuring proper sealing and protection of the axle bearings.

To replace the inner seal, the stub axle must be removed, so it’s recommended to do this when servicing the CV joints. This durable seal is essential for maintaining your vehicle’s axle bearings, preventing leaks and ensuring the longevity of the rear suspension system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

211-501-331/B – CV Joint Kit

Description:

Complete with rubber boot and all fixings
Includes high-quality grease for smooth operation
Durable and easy to install

This CV joint kit is designed for optimal performance and durability, ensuring a smooth and reliable ride. It comes with a sturdy rubber boot, quality grease, and all the necessary fixings, making installation straightforward and hassle-free.

Perfect for DIY enthusiasts or professional mechanics, this kit provides everything needed to repair or replace your vehicle’s CV joint. The included grease helps reduce wear, extending the lifespan of your drive-train.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Same as 251-598-201

Additional Vehicle Info: T25,T2 Bay

211-501-331/B/JR – CV Joint

Description:

CV joint only, supplied without grease or boot. Sold individually, 4 required per car.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990)

Additional Vehicle Info: T25,T2 Bay

211-501-331/BF – CV Joint T2 Bay and T25 FORST

Description:

CV joint only, supplied without grease or boot. Sold individually, 4 required per car.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

211-501-331/BR – CV Joint Kit

Description:

This CV joint kit contains a gaiter, grease, clips and bolts required to replace one joint.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

211-501-357/F – CV Bolt Spreader Plate, each, 3 per joint, Bay 68-79 T25 80-92

Description:

CV joint bolt lock plate, each, 3 per CV joint, Bay 68-79 & T25 80-92.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

211-501-505 – Rear Bump Stop Mount

Description:

Rear bump stop mount situated on the rear axles.

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967) - T2 Split USA (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-615 – Rear Brake Drum, 5x112 Stud Pattern, Single

Description:

Supplied individually, replace in pairs
5x205 PCD stud pattern for secure fit
Ensures smooth braking performance

This rear brake drum, featuring a 5x112 PCD stud pattern, is a vital component for your vehicle’s braking system. Supplied as a single unit, it is strongly recommended to replace brake drums in pairs for balanced and efficient braking performance.

Designed to deliver reliable stopping power, this brake drum ensures optimal fit and function. Whether you're maintaining or upgrading your vehicle, this high-quality part will keep your braking system performing at its best.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: T2 Bay

211-501-615/A – Rear Brake Drum 5x205 Stud Pattern

Description:

Rear brake drum. Each

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Notes:Some 1963 Buses, Particularly those originally supplied to USA, were fitted with M code 216, 1500cc engine. These have small axles (36mm nut) but with large brakes (45mm Shoes). This drum was part number 211-501-615\/D

Additional Vehicle Info: T2 Split

211-501-615/BQ – Rear Brake Drum with 5x112 PCD Best Quality, Pair

Description:

Rear brake drum with 5x112 PCD, supplied as a pair

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:

It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: T2 Bay

211-501-615/BR – Rear Brake Drum, 5x112 Stud Pattern, Single

Description:

Heavy-duty Brazilian spec with thicker bolt face
Supplied individually; replace in pairs for best results
Designed for enhanced durability and performance

Upgrade your vehicle’s braking system with our rear brake drum featuring a 5x112 PCD stud pattern. These heavy-duty drums are Brazilian-spec, offering extra thickness across the bolt face area for improved strength and longevity.

Supplied individually, we recommend replacing brake drums in pairs to ensure balanced braking performance. Ideal for those seeking enhanced durability and reliability, these drums are built to withstand demanding conditions and provide a high level of performance.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)

Notes:Same as 211-501-615

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-501-615/E – Rear Brake Drum, 5x205 Stud Pattern, Single

Description:

For use with 46mm castle nut, 45mm brake shoes
Supplied individually, replace in pairs
Ensures reliable braking performance

This rear brake drum, featuring a 5x205 PCD stud pattern, is designed for use with a 46mm castle nut and 45mm brake shoes. Supplied individually, it’s recommended to replace these drums in pairs for balanced braking and optimal performance.

Ideal for vehicle maintenance, this high-quality brake drum provides reliable and efficient braking. Whether you're completing a full brake overhaul or addressing wear, this part ensures your vehicle remains safe and road-ready.

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-615/E/BQ – Rear Brake Drum 5x205 Stud Pattern

Description:

Rear brake drum for 46mm castle nut and 45mm shoes
Supplied individually
This is a German made brake drum

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-501-615/G – Brake Drum Rear 5x205 Stud Pattern

Description:

Fits early T2 Bays (1967 to July 1970)
Wide 5 drums with internal hub
From chassis number 218 109 823 >>

Forst offers a quality, affordable rear brake drum designed for early T2 Bays from 1967 to July 1970. Featuring the classic 5x205 stud pattern, these "wide 5" drums come with an internal hub, ensuring compatibility and reliable performance for vehicles from chassis number 218 109 823

Perfect for restorations or routine replacements, these drums deliver durability and precise fitment, maintaining your vehicle’s braking system with the trusted quality of Forst.

Compatible Vehicles: - T2 Bay (1968,1969,1970)

Additional Vehicle Info: T2 Bay

211-501-615/G/BQ – Rear Brake Drum 5x205 Stud Pattern

Description:

Rear brake drum with 5x205 stud pattern
To fit Baywindow 68-70 from chassis number 218 109 823>>

Compatible Vehicles: - T2 Bay (1968,1969,1970)

Notes:Please note, you may require the use of AC601SP100 wheel spacers when running GT wheels with these brake drums due to brake drum snout clearance.

Additional Vehicle Info: T2 Bay

211-501-619 – Rear Wheel Hub with Studs

Description:

Durable rear wheel hub with studs included
Compatible with Baywindow and T25 vehicles
Ideal for repairs and replacements, ensuring smooth rides

This rear wheel hub is designed for durability and reliability. It includes all necessary studs for easy installation, making it a suitable fit for Baywindow models from chassis number F 211 2000 001 (08/1970-1979) and T25 models from 1980 to 1992.

Whether you’re restoring a classic or maintaining your daily driver, this rear wheel hub ensures optimal functionality. Its robust construction provides long-lasting service, enhancing your vehicle's performance on the road.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

211-501-627/A – Rear Wheel Stud

Description:

Standard press-in rear wheel stud for T2 Bay

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

211-511-225 – Torsion Bar Cover, Rear

Description:

Protects rear torsion bar from debris and damage
Durable material ensures long-lasting performance
Designed for easy installation and fit

This rear torsion bar cover offers essential protection to keep your vehicle's suspension system in top condition. Crafted from high-quality materials, it shields the torsion bar from road debris, corrosion, and wear, extending the lifespan of your suspension components.

Its design allows for a snug fit and easy installation, making it a practical upgrade for anyone looking to maintain their vehicle’s performance. Enhance both durability and functionality with this simple yet effective addition.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Bay,T2 Split

211-511-245/A – Rubber Bush for Rear Torsion Bar

Description:

Ensures smooth spring plate rotation
Ideal for re-indexing suspension
Supplied as singles, 4 needed per vehicle

These spring plate rubber bushes are essential for maintaining proper rear suspension function. Over time, worn or perished bushes can cause sagging, affecting the vehicle's stability. By allowing the spring plate to rotate smoothly from a fixed pivot, these bushes help keep your suspension in top shape.

When re-indexing the rear suspension spring plates, it's the perfect time to replace these often overlooked components. Supplied individually, you will need four for a complete vehicle replacement. Don't let ageing bushes compromise your suspension performance.

Additional Vehicle Info: T2 Bay,T2 Split

211-513-031/BQ – Bilstein B6 Gas Shock Absorber Rear

Description:

With over 60 Years of OEM Experience Bilstein Shock Absorbers Lead the Way in Performance and Durability
Performance Level: B6 – an upgrade over stock
Gas Pressurised rear shock

Bilstein shock absorbers, with their long-standing legacy in OEM quality and racing performance, lead the way in durability and reliability. The B6 model provides an enhanced upgrade in performance over stock, offering superior handling, stability, and comfort for VW Baywindow model.

With a collapsed length of 350mm and an extended length of 559mm, these shocks deliver the ideal balance of travel and control, making them perfect for everyday driving or more performance-oriented applications.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: T2 Bay

211-513-031/NG – Rear Shock Absorber 560-345mm

Description:

Rear shock absorber for fit Bay window from 1968-07/1971 with standard ride height suspension
Supplied in singles but advised to replace in pairs

Compressed 345mm / Extended 560mm

Although you can drive a car on worn shocks, it is not something you should scrimp on, as they are integral to everything the car does, especially braking and turning. On badly worn shocks, braking distances can increase; a car could ‘skip’ across the road mid-corner over bumps; or it may react in an unexpected manner during an emergency manoeuvre, so at the first sign of an issue, get them replaced with these top quality BOGE replacements

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)

Notes:We recommended replacing shock absorbers in pairs; having two effectively different dampers on the same axle will do nothing to improve stability or safety.

Additional Vehicle Info: T2 Bay

211-513-031/R – Rear Shock Absorber, 590-335mm, Oil Filled

Description:

Rear oil-filled shock absorber for Baywindow at standard ride height
Compressed length: 335mm, extended length: 590mm
Sold individually, but best replaced in pairs

This rear oil-filled shock absorber is designed to fit Baywindow models with standard ride height suspension. It provides smooth and reliable performance, helping to maintain a comfortable and controlled ride.

Each shock absorber is sold separately, but replacing them in pairs is recommended for even handling and stability. Built for durability, it ensures consistent performance over time.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Notes:We recommend replacing shock absorbers in pairs; having two effectively different dampers on the same axle will do nothing to improve stability or safety.

Additional Vehicle Info: T2 Bay

211-513-537 – Spring Washer for Various Applications M12x24

Description:

Suitable for Beetle, Ghia, Type 3 rear spring plates
Ideal for securing shock absorber bolts on front and rear suspensions
Compatible with T2 A-Arm bush and Jetta rear lid hinge

This M12 spring washer is a versatile and essential component across the VW range, including Beetle, Ghia, and Type 3 models. It ensures secure connections in a variety of suspension and chassis applications.

Whether you're working on rear spring plates, shock absorber bolts, or T2 A-arm bushes, this spring washer provides the necessary pressure and stability. Its robust design guarantees reliable performance and a perfect fit, making it an excellent choice for restoring or maintaining your VW.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,T2 Bay,T2 Split,Type 3

211-598-201/R – CV Boot Kit, including Grease and Installation Hardware

Description:

Complete kit for straightforward installation
Helps keep CV joints clean and functioning
Prevents costly repairs from damage

Our CV gaiter kit comes with everything needed for installation, including high-quality CV boots, grease, and necessary hardware. These boots are essential for protecting your CV axles and joints, helping them stay clean and extend their service life. If you notice any damage or splitting in your CV boot, it’s important to replace it promptly to avoid more expensive repairs.

This kit simplifies the process of maintaining your vehicle’s CV joints. With the included installation hardware, you can easily ensure your vehicle is running smoothly. Addressing CV boot issues early can save you time and money in the long run.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

211-598-201/S – CV Joint Kit including Boot Grease and Hardware

Description:

Complete kit includes rubber boot, grease, and installation hardware
Essential for maintaining smooth power transfer in your vehicle
Sold individually; 4 kits needed per car

Ensure your vehicle runs smoothly with our CV Joint Kit, which includes everything you need for a complete installation. Each kit comes with a durable rubber boot, high-quality grease, and all necessary installation hardware, making it easy to replace worn or damaged components.

Properly functioning CV joints are crucial for effective power transfer and handling. Sold individually, remember that four kits are required per car to ensure optimal performance. Don’t compromise on quality—upgrade your CV joints today for a reliable and smooth driving experience.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:4 required per vehicle.

Additional Vehicle Info: T25,T2 Bay

211-598-287/BQ – Rear Wheel Bearing Kit, IRS Suspension

Description:

Suitable for IRS axle suspension
Ensures smooth wheel operation
Top-quality, durable components

This rear wheel bearing kit is for use on vehicles with rear IRS axle suspension. It includes all the top-quality parts required to service one rear wheel, ensuring smooth and reliable wheel operation for your vehicle.

With top-quality components, this kit guarantees durability and optimal performance, making it an essential choice for maintaining your vehicle's safety and efficiency. Trust our rear wheel bearing kit to keep your vehicle running smoothly and securely.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Baywindow USA (1968,1969,1970)

Additional Vehicle Info: T2 Bay

211-598-287/F – Rear Wheel Bearing Kit, IRS

Description:

Rear wheel bearing kit suitable for models with IRS.

This convenient kit contains all the parts required to service one rear wheel.

Two kits required per axle.

Compatible Vehicles: - T2 Bay (1968,1969,1970)

Additional Vehicle Info: T2 Bay

211-599-201/A – Gearbox Mount Front

Description:

Front gearbox mount.

This gearbox mount has been obsolete for some time, resulting in having to source rare serviceable second hand units. After an overwhelming number of requests from our customers, we are pleased to offer this quality reproduction.

Copied from a NOS genuine item it is equal in fitment and quality to the original.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)

Notes:1698-1972 models up to chassis number 212 2000 000

Additional Vehicle Info: T2 Bay

211-599-227 – Gearbox Mount Yoke

Description:

Gearbox mount yoke to fit Baywindow from 08/71-1979

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Notes:Please note: this mount can only be used with retaining bracket 211-599-243\/B

Additional Vehicle Info: T2 Bay

211-599-231 – Gearbox Nose Cone Mount

Description:

Gearbox nose cone mount including installation hardware to fit Baywindow from 1968-07/1971

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)

Additional Vehicle Info: T2 Bay

211-599-243/B – Retaining Bracket for Front Gearbox Mount

Description:

Retaining bracket for the front gearbox mount.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-599-431 – Rear Gearbox Mount

Description:

Rear gearbox mount to fit Baywindow from 08/1971-1979

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-601-027/E – Slotted Steel Wheel, 4.5Jx15" 5x205 Stud Pattern ET45

Description: Brand new original style 15 inch slotted steel wheel manufactured by Wolfsburg West. These are supplied with prefitted hub cap clips and finished in an old English white paint.

Whilst these were originally fitted to late 1955 splitscreen buses to early 1964 they will fit any vehicle with a 5x205 PCD.

Perfect addition to any project!

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964)

Additional Vehicle Info: T2 Split

211-601-027/HG – Steel Wheel, Silver, 5.5x14", 5x112 PCD, ET39

Description:

Standard steel wheel with a silver finish
Dimensions: 5.5x14", 5x112 PCD, ET39
Durable and reliable for everyday driving

This steel wheel is designed for durability and practicality. With a silver finish, it offers a clean and simple look that fits a variety of vehicles.

Built to standard specifications, it provides a secure fit with 5.5x14" dimensions, a 5x112 bolt pattern, and an ET39 offset. Ideal for daily use, it ensures stability and dependable performance on the road.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Baywindow from chassis F 211 2000 001>> 08\/1970

Additional Vehicle Info: T25,T2 Bay

211-609-003 – Rear Brake Shoe Return Spring Set of 8

Description:

Rear brake shoe return spring. Set of 8

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-609-070/R – Front Brake Shoe Fitting Kit

Description:

Front brake shoe fitting kit supplied with the brake shoe retaining pins, clips and springs. One kit required per.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Baywindow USA (1968,1969,1970) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Bay,T2 Split

211-609-070/RE – Rear Brake Shoe Fitting Kit

Description:

Brake shoe fitting kit. Sold per axle. All pins, clips and springs. 16 piece kit

Some years have 2 additional smaller springs which will need to be re-used

Compatible Vehicles: - T2 Bay (1968,1969,1970) - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Bay,T2 Split

211-609-071 – Brake Shoe Fitting Kit for Rear Drum Brakes

Description:

Complete kit for rear drum brake shoe installation
Includes all necessary components for fitting
One kit required per vehicle

Ensure a smooth brake shoe replacement with this comprehensive brake shoe fitting kit, specifically designed for rear drum brakes. This kit includes everything you need to fit a set of rear drum brake shoes, making the installation process straightforward and hassle-free.

Ideal for both DIY enthusiasts and professional mechanics, this kit guarantees that you have all the essential parts for a successful brake shoe installation. Remember, one kit is required per vehicle to complete the job effectively.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

211-609-139/A – Front Brake Drum Backing Plate Left

Description:

Brake backing plate front left,

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-609-139/B – Front Brake Drum Backing Plate Left

Description:

Front left brake backing plate

Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-609-139/D – Brake Drum Backing Plate for the Left Front

Description:

Brake drum backing plate for the front left hand side on early Baywindow models from March 1968 to July 1970.

Compatible Vehicles: - T2 Bay (1968,1969,1970)

Notes:For pre March 1968 Baywindow models, Volkswagen refers to workshop bulletin 14\/68 for modification to fit.

Additional Vehicle Info: T2 Bay

211-609-140/A – Front Brake Drum Backing Plate Right

Description:

Brake backing plate front Right,

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-609-140/B – Front Brake Drum Backing Plate Right

Description:

Front right brake backing plate

Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

211-609-140/D – Brake Drum Backing Plate for the Right Front

Description:

Brake drum backing plate for the front right hand side on early Baywindow models from March 1968 to July 1970.

Compatible Vehicles: - T2 Bay (1968,1969,1970)

Notes:For pre march 1968 Baywindow models Volkswagen refers to workshop bulletin 14\/68 for modification to fit.

Additional Vehicle Info: T2 Bay

211-609-185/A / – Brake Spring Clip for Star Adjuster each

Description:

Brake spring clip for retaining the star adjuster. EACH.

Compatible Vehicles: - Beetle (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - T2 Split Bus (1950,1951,1952,1953,1954,1955)

Notes:Requires welding to the backing plate

Additional Vehicle Info: 924,Beetle,Karmann Ghia,T2 Split

211-609-185/C – Leaf Spring, Brake Backing Plate

Description:

Front brake backing plate leaf spring,

Rivets on to the brake backing plate to prevent the star adjuster from rotating.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - T2 Split Bus (1963,1964,1965,1966,1967)

Additional Vehicle Info: T2 Bay,T2 Split

211-609-209/A – Brake Shoe Adjusting Screw, Front, Rear

Description:

Fits front or rear brake shoes
Ensures proper brake adjustment
Durable construction for long-term use

This brake shoe adjusting screw is designed for use on either front or rear brake shoes, making it a versatile replacement part for maintaining optimal brake performance. It helps ensure precise adjustment and secure fitment, contributing to safer, more reliable braking.

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-609-425/L – Rear Brake Drum Backing Plate Left

Description:

Designed for left side, compatible with drum brake systems
Essential for mounting brake shoes and wheel cylinders securely
Durable construction to withstand exposure to elements

Replace your worn-out rear brake backing plate with this high-quality left-side component, specifically designed for drum brake systems. This part is crucial for securely attaching your brake shoes and wheel cylinders, ensuring optimal performance and safety.

Given that backing plates are often exposed to the elements, they tend to rust heavily over time. Our backing plate offers robust durability to resist corrosion, providing a reliable solution for your braking system. Restore your vehicle's braking efficiency with this essential part, designed to last and enhance your driving experience.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-609-426/L – Rear Brake Drum Backing Plate Right

Description:

Designed for right side, compatible with drum brake systems
Essential for mounting brake shoes and wheel cylinders securely
Durable construction to withstand exposure to elements

Replace your worn-out rear brake backing plate with this high-quality right-side component, specifically designed for drum brake systems. This part is crucial for securely attaching your brake shoes and wheel cylinders, ensuring optimal performance and safety.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)

Additional Vehicle Info: Brazil Kombi,T2 Bay

211-609-439/A – Rear Brake Drum Backing Plate Left

Description:

Rear left brake back plate for models made between March 1955 and July 1963.

Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)

Additional Vehicle Info: T2 Split

211-609-439/B – Rear Brake Drum Backing Plate Left

Description:

Rear left brake backing plate

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split