yuliiatest
yuliiatestKnowledge BaseFitment
FAQs Knowledge Base
oranges Fitment
Related Articles
Properties
Tags imported-from-json
Table of Contents

Fitment #125

901-101-161-02 – Engine Case Washer

Description:

Washer for the engine crank case, 24 required per engine.

To fit:
911 1965-1989
911 (930) Turbo 1975-1989
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,914,930

901-101-380-02 – Oil Sump Strainer, Original Style

Description:

  • Fine gauze traps harmful debris and particles
  • Helps extend engine life and performance
  • Requires 2x gaskets when replacing
Keep your engine running smoothly with this high-quality original style oil sump strainer. Designed to trap debris and particles before they reach the oil pump, the strainer helps prevent internal damage and extends engine life. Its durable gauze filter ensures reliable performance and should be cleaned or replaced during every oil change for optimal protection.

When removing the strainer, be sure to order 2x gaskets (part number: 930-101-391-01) to ensure a proper seal. Regular maintenance of the strainer is a simple yet essential step in preserving your engine’s health and performance.

To fit:
911 1965-1977
911 (930) Turbo 1975-1977
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972) - 930 (1975,1976,1977)

Additional Vehicle Info: 911,914,930

901-101-386-00 – Engine Sump Plate, Early Style, Stainless Steel

Description:

  • Durable stainless steel resists rust and corrosion
  • Direct-fit replacement for easy installation
  • Painted finish for an OE look
Upgrade your engine’s reliability with this high-quality stainless steel sump plate, designed in the original early style with a threaded drain hole. Unlike the OE mild steel version, this plate won’t rust or weaken over time, ensuring long-term durability and performance.

Built for a precise fit, this sump plate installs easily and provides a secure seal to prevent leaks. Backed by a Limited Lifetime / Unlimited Mileage Warranty, it's a dependable upgrade that enhances your engine’s longevity and efficiency.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911,914,930

901-102-026-02 – Forged Flywheel, 215mm

Description:

  • Forged chromoly construction for superior strength
  • Heat-treated 12V ring gear for durability
  • Precision-machined to OEM specifications
Upgrade your early Porsche 911 or 914-6 with this brand-new forged chromoly flywheel, precision-engineered as a direct replacement for 215mm applications. Manufactured to exact specifications, it ensures optimal fitment and performance. The flywheel features a heat-treated 12V ring gear for enhanced durability and long-lasting reliability under demanding conditions. Weight is 5.7kg.

Ideal for restoration or performance builds, this flywheel offers the strength and resilience of forged chromoly construction, making it a dependable choice for enthusiasts and professionals alike. Whether you're refreshing your drivetrain or building for longevity, this component delivers OEM compatibility with modern manufacturing quality.

To fit:
911 1965-1968
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-104-191-00 – Cylinder Base Gasket, 0.25mm

Description:

Engine cylinder base gasket, cylinder to engine case. Standard 0.25mm.

To fit:
911 1965-1973
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-104-382-03 – Cylinder Head Nut

Description:

Cylinder head nut, original HD style.

6 cylinder engines: 24 required
4 cylinder engines: 16 required

To fit:
356 1960-1965
912 1965-1969
911 1965-1989
911 (930) Turbo 1975-1989
914-6 1970-1972
911 (964) 1989-1994 - Used in the transmission case and starter motor assembly
911 (993) 1994-1998 - Used in the starter motor assembly 2 required

Compatible Vehicles: - 356 (1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 356,911,912,914,930,964,993

901-104-382-99 – Cylinder Head Nut and Washer Kit

Description:

Cylinder head nut and washer kit. This kit contains a complete engine set of 24 nuts and large style washers used for 3.0 SC, 3.2 and 3.3 Turbo engines.

Precisely manufactured to OE head nut washer dimensions for easy installation and proper function. Durable high-quality material withstands oil exposure and intense engine heat.

To fit:
911 1978-1989
911 (930) Turbo 3.3 1978-1989

Compatible Vehicles: - 911 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,930

901-105-115-03 – Valve Cover, Upper

Description:

Upper valve cover. Fits left or right, 2 required per engine.

To fit:
911 08/1967-1989
911 (930) Turbo 1975-1989
911 (964) Turbo 3.3 1991-1992
914-6 1970-1972

Compatible Vehicles: - 911 (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1991,1992)

Additional Vehicle Info: 911,914,930,964

901-105-191-02 – Timing Chain Cover Gasket, Left

Description:

Timing chain cover gasket to fit the left hand cylinder bank.

To fit:
911 09/1964-07/1967

Compatible Vehicles: - 911 (1965,1966,1967)

Additional Vehicle Info: 911

901-105-192-02 – Timing Chain Cover Gasket, Right

Description:

Timing chain cover gasket to fit the right hand cylinder bank.

To fit:
911 09/1964-07/1967

Compatible Vehicles: - 911 (1965,1966,1967)

Additional Vehicle Info: 911

901-105-342-04 – Rocker Arm Shaft

Description:

Rocker arm shaft.

To fit:
911 1965-1989
911 (930) Turbo 1975-1989
914-6 1970-1972
911 (964) 1989-1994 including Turbo

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 911,914,930,964

901-105-583-02 – Camshaft Sprocket Flange

Description:

  • Fits left or right camshaft
  • Manufactured to OE flange dimensions for easy installation
  • 24 Month Unlimited Mileage Warranty
To fit:
911 1965-1989
911 (930) Turbo 1975-1989
911 (964) 1989-1994 including Turbo
911 (993) 1994-1998 including Turbo
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,914,930,964,993

901-106-035-01 – Engine Air Baffle Plate, Centre

Description:

  • Manufactured to OE standards
  • High quality materials
  • 4 required per vehicle
To fit:
911 2.0-2.7 1965-1977
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-106-071-01 – Engine Tinware Cover, Front Left

Description:

  • Manufactured to OE standards
  • High quality materials
To fit:
911 2.0-2.7 1969-1976 (not Sportomatic)

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911

901-106-081-00 – Engine Tinware Cover, Front Left

Description:

Engine tinware cover, front left.

To fit:
911 1965-1983 (not Turbo models)

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

901-106-083-02 – Engine Tinware Cover, Left

Description:

Engine tinware cover, left.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: 911

901-106-083-04 – Engine Tinware Cover, Left

Description:

Engine tinware cover, left.

To fit:
911 T-E/E/S 1972-1973
911 Carrera 2.7 1972-1977

Compatible Vehicles: - 911 (1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: 911

901-106-084-00 – Engine Tinware Cover, Right

Description:

Engine tinware cover, right.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 930 (1975,1976,1977)

Additional Vehicle Info: 911,930

901-106-702-00 – Engine Tinware Cover, Front Left

Description:

  • Manufactured to OE standards
  • High quality materials
To fit:
911 1969-1976 (not Sportomatic)

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911

901-106-825-00 – Engine Tinware Cover for Air Hose, Left

Description:

Engine tinware cover for air hose, left.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,930

901-106-826-00 – Engine Tinware Cover for Air Hose, Right

Description:

Engine tinware cover for air hose, right.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 930 (1975,1976,1977)

Additional Vehicle Info: 911,930

901-107-002-06 – Oil Pump

Description:

Oil pump.

To fit:
911 1965-1973
911 2.7 1974-1975
911 2.7 1976 911.83 engine only

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-107-005-46 – Engine Oil Tank

Description:

  • Manufactured to OE standards
  • High quality materials
To fit:
914-6 2.0 1970-1972 6 cylinder models

Compatible Vehicles: - 914 (1970,1971,1972)

Additional Vehicle Info: 914

901-107-025-00 – Bracket for Oil Filter on Oil Tank

Description:

  • Manufactured to OE standards
  • High quality materials
  • Seal included
To fit:
911 T/E 2.0-2.2 08/1968-07/1971
914-6 2.0

Compatible Vehicles: - 911 (1969,1970,1971) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-107-203-09 – Oil Filter

Description:

Oil filter.

To fit:
911 2.0-2.2 09/1964-07/1971
914-6 2.0 6-cylinder 11/1969-12/1973

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-107-203-10G – Oil Filter Red Purolator PC34

Description:

Original red “PUROLATOR” PC34 oil filter.

To fit:
911 2.0-2.2 09/1964-07/1971
914-6 2.0 6-cylinder 11/1969-12/1973

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-107-281-00 – Spring Ring for Oil Filter Sealing Ring

Description:

  • Used to secure sealing ring 90110729100
  • Manufactured to OE standards
To fit:
911 1965-1971
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-107-291-00 – Oil Filter Sealing Ring

Description:

Oil filter sealing ring.

To fit:
911 1965-1971
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-107-331-1Y – Oil Breather Hose, Oil Tank to Engine

Description:

Oil breather hose from the oil tank to the engine. Length is 1250mm.

To fit:
911 2.0, 2.2 1965-1971

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-107-348-02 – Oil Hose Cam Feed, Right

Description:

Oil hose that feeds the right hand camshaft.

To fit:
911 1965-1969 Engine no. 903070 onwards
911 1970-1983
911 (930) 1975-1983
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911,914,930

901-107-351-01 – Oil Return Tube

Description:

Original style oil return tube with seals. 4 required per engine.

Compatible Vehicles: - 911 (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,914,930,964,993

901-107-640-02 – Oil Tank Filler Neck

Description:

Oil tank filler neck.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-107-691-10 – Oil Filler Neck Rubber Sleeve

Description:

  • Stops leaks from damaged or missing boot
  • OE dimensions for easy, secure fit
  • Heat- and oil-resistant material
This rubber sleeve is a direct replacement for a missing or damaged oil filler boot, helping to stop oil leaks and maintain proper sealing. Made to OE dimensions, it fits securely and installs easily. The high-quality material resists engine heat and oil exposure, ensuring long-term durability. Backed by a 24-month unlimited mileage warranty.

To fit:
914-6 1970-1972

Compatible Vehicles: - 914 (1970,1971,1972)

Additional Vehicle Info: 914

901-107-694-00 – Oil Filler Hose

Description:

Oil filler hose, oil filler neck to oil tank.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-107-695-00 – Oil Breather Line Sealing Sleeve

Description:

Oil breather line sealing sleeve, the grommet which fits over the breather hose.

To fit:
911 1965-1971

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-107-696-00 – Sealing Sleeve, Oil Filler Neck

Description:

  • Manufactured to OE standards
  • High quality materials

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-107-770-00 – Oil Level Dipstick

Description:

  • OE fit for easy installation
  • Heat- and oil-resistant materials
  • Leak-proof OE-style upper seal
This oil dipstick is a direct replacement for damaged or missing originals. It’s built to match factory dimensions, making installation simple and ensuring a clean fit in the engine bay.

Made from durable materials, it resists heat and oil vapour. The OE-style seal helps prevent leaks, and it comes with a 24-month unlimited mileage warranty.

To fit:
911 1965-1971

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-107-770-40 – Oil Level Dipstick

Description:

  • OE fit for easy installation
  • Heat- and oil-resistant materials
  • Leak-proof OE-style upper seal
This oil dipstick is a direct replacement for damaged or missing originals. It’s built to match factory dimensions, making installation simple and ensuring a clean fit in the engine bay.

Made from durable materials, it resists heat and oil vapour. The OE-style seal helps prevent leaks, and it comes with a 24-month unlimited mileage warranty.

To fit:
914-6 1970-1972

Compatible Vehicles: - 914 (1970,1971,1972)

Additional Vehicle Info: 914

901-108-214-03 – Air Filter Housing Gasket

Description:

Air filter housing gasket from the air cleaner bucket to filter housing, 2 required per vehicle.

To fit:
911 1965-1970 Models with Weber carburettor
911 1970-1977
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-108-215-02 – Outer Air Filter Lid Gasket

Description:

Air filter lid gasket, this is the outer larger diameter lid gasket.

To fit:
911 1965-1970 Models with Weber carburettor
911 1970-1977
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-108-218-00 – Gasket, Weber Carburettor to Air Cleaner

Description:

Carburettor gasket, for Weber carburettor to air cleaner. 2 required per vehicle.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 911

901-108-291-00 – Air Intake Pre Heat Hose

Description:

Air intake pre heat hose.

To fit:
911 1965-1973
912 1965-1969

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 911,912

901-108-398-01 – Carburettor to Inlet Manifold Gasket

Description:

Carburettor to inlet manifold gasket.

To fit:
911 1965-1969 L / T / TU / S WEBER Carburettor
911 1970-1973 T / T-V ZENITH Carburettor
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-108-955-11 – Air Filter

Description:

Air filter element.

To fit:
911 1965-1977 Carburettor models
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-108-983-00 – Inner Air Filter Lid Gasket

Description:

Air filter lid gasket, this is the inner smaller diameter lid gasket.

To fit:
911 1965-1970 Models with Webber carburettor
911 1970-1977
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911,914

901-110-192-00 – Gasket, Throttle Body to Inlet Manifold

Description:

  • For mechanical injection throttle bodies
  • Manufactured to OE standards
  • 2 required per vehicle
To fit:
911 E/S 1969-1971

Compatible Vehicles: - 911 (1969,1970,1971)

Additional Vehicle Info: 911

901-111-011-01 – Exhaust Rear Silencer, Early

Description:

Standard replacement exhaust rear silencer with the correct polished Ø57mm tapered cut tail pipe for early pre-1965 911 models.

Manufactured in 1.5 mm aluminised mild steel and finished in heat resistant grey paint. Heat shields on top and bottom side are manufactured in 1.0 mm aluminised mild steel. 2 mm inlay of ceramic heat and sound deadening material. The exhaust is manufactured according to early OEM "Leistritz" design.

With TÜV/EEC Approval.

To fit:
911 09/1964-07/1965

Compatible Vehicles: - 911 (1965)

Additional Vehicle Info: 911

901-111-011-02 – Exhaust Rear Silencer, Early

Description:

Standard replacement exhaust rear silencer with the correct chrome Ø57mm tail pipe for early 1966 911 models.

Manufactured in 1.5 mm aluminised mild steel and finished in heat resistant grey paint. Heat shields on top and bottom side are manufactured in 1.0 mm aluminised mild steel. 2 mm inlay of ceramic heat and sound deadening material. The exhaust is manufactured according to early OEM "Leistritz" design.

With TÜV/EEC Approval.

To fit:
911 08/1966-07/1966

Compatible Vehicles: - 911 (1966)

Additional Vehicle Info: 911

901-111-011-03 – Exhaust Rear Silencer, Early

Description:

Standard replacement exhaust rear silencer with the correct wrinkled tail pipe and Ø57 mm flat roll tip for early 1967 911 models.

Manufactured in 1.5 mm aluminised mild steel and finished in heat resistant grey paint. Heat shields on top and bottom side are manufactured in 1.0 mm aluminised mild steel. 2 mm inlay of ceramic heat and sound deadening material. The exhaust is manufactured according to early OEM "Leistritz" design.

With TÜV/EEC Approval.

To fit:
911 08/1966-07/1967

Compatible Vehicles: - 911 (1967)

Additional Vehicle Info: 911

901-111-011-11 – Exhaust Rear Silencer

Description:

  • OE standard fit and finish
  • Chrome polished tailpipe tip
  • Heat-resistant painted steel
Upgrade your vehicle’s exhaust system with the Dansk Original rear silencer, engineered for durability and performance. Crafted from aluminized mild steel and finished in grey heat-resistant paint, this silencer features a Ø 60mm single tail pipe with a chrome polished tip. Designed to meet original equipment standards, it ensures a precise fit and reliable function for standard replacement needs.

Built with high-quality materials, this silencer offers excellent corrosion resistance and long-lasting performance. Whether you're restoring factory sound or replacing a worn component, the Dansk Original rear silencer delivers dependable quality and a clean, professional look.

To fit:
914-6 1970-1972

Compatible Vehicles: - 914 (1970,1971,1972)

Additional Vehicle Info: 914

901-111-151-04/SS – Exhaust Silencer Bracket, Stainless Steel

Description:

Exhaust silencer bracket in stainless steel.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

901-111-157-04 – Exhaust Silencer Strap, Stainless Steel

Description:

Stainless steel exhaust silencer strap to secure the rear silencer, bolt included. 2 required per vehicle.

To fit:
911 T/E/S (not mech.injection) 2.0-2.4 1965-1973
911 S (mech injection) 2.4 1971-1973
911 S/Carrera 2.7 1973-1975
911 SC/Carrera 2.7-3.0 1975-1983

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

901-111-193-00 – Exhaust Gasket, Rear Silencer

Description:

Exhaust gasket for the rear silencer.

To fit:
911 S 2.4 1971-1973 Mech. Injection
911 T/E/S 2.0-2.4 1965-1973 not Mech. Injection
911 S/Carrera 2.7 1973-1976

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-111-245-01 – Exhaust Tailpipe Tip, Chrome

Description:

Chromed stainless steel exhaust tailpipe tip, OE design. Inner diameter 57mm.

To fit:
911 1965-1973
912 1965-1969
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,912,914

901-111-287-00 – Exhaust Tail Pipe, OE Style, Stainless Steel

Description:

Tail pipe, OE style, stainless steel. To be welded on the exhaust.

To fit:
911 2.0-2.7 01/1963-07/1973

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

901-116-001-01 – Clutch Pressure Plate

Description:

Clutch pressure plate, 215mm.

To fit:
911 2.0 1965-1968 not S models
911 T, E 2.0 1969
914-6 1970-1972
914 1.7, 1.8, 2.0 1970-1976
912E 1976

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911,912,912E,914

901-116-014-00 – Clutch Friction Disc

Description:

Clutch friction disc, 215mm.

To fit:
911 2.0 1965-1968
911 2.0 1969
911 S 2.0 1969 only with pressure plate 90111600301

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 911

901-116-081-11 – Clutch Release Bearing

Description:

Clutch release bearing.

To fit:
911 2.0 1965-1969
912 1.6 1965-1969
914 1970-1976

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911,912,914

901-116-825-11 – Clutch Release Bearing Guide Bushing

Description:

Clutch release bearing guide bushing, 2 required per vehicle.

To fit:
911 1965-1969 from chassis F 030 5101>>
914 1970-1976

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911,912,914

901-116-911-00 – Clutch Kit

Description:

  • Complete kit: plate, pressure plate, bearing
  • Sachs OEM quality with 2 year warranty
  • Ensures smooth, reliable performance
This 215mm clutch kit, manufactured by Sachs, includes everything you need for a complete clutch replacement. The kit comes with a pressure plate, clutch plate, release bearing and special grease for assembly, ensuring all critical components are covered.

Designed for durability and precision, this Sachs clutch kit delivers reliable performance and smooth operation. Whether you're upgrading or replacing a worn-out clutch, trust this high-quality kit to restore your vehicle's driving experience to optimal levels.

To fit:
914 1970-1976
914-6 1970-1972

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

901-201-010-22 – Fuel Tank, 62 Litre

Description:

  • 62-litre capacity
  • Painted steel for durability
  • Manufactured to OE standards
This 62-litre fuel tank is a solid replacement for rusted or leaking tanks. Made from painted steel and made to OE specifications.

To fit:
911 2.0, 2.2 10/1964-07/1971
912 1.6 01/1965-02/1970

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 911,912

901-201-010-30 – Fuel Tank, 100 Litre

Description:

  • 100-litre capacity
  • Painted steel for durability
  • Manufactured to OE standards
This 100-litre fuel tank is a solid replacement for rusted or leaking tanks. Made from painted steel and made to OE specifications.

Please note: When fitting to 74-89 models modification are required to the pipe connections at the base.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

901-201-023-06 – Fuel Filter In Tank, 6mm

Description:

  • Screws into fuel tank
  • Connects to 6mm fuel feed line
  • Seal included
This in-tank fuel filter screws directly into the fuel tank and connects to a 6mm fuel feed line. It helps keep fuel clean by trapping dirt and debris before it reaches the engine, supporting smooth and reliable performance.

To fit:
911 T/E/S 2.0-2.4 with carb. 07/1966-07/1973
911 Carrera RS 2.7 with carb. 08/1972-07/1973
912 1.6 with carb. 01/1965-02/1970

Compatible Vehicles: - 911 (1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 911,912

901-201-062-22 – Fuel Bleeder Expansion Tank, Black

Description:

Fuel bleeder expansion tank located under front cowl. Black.

To fit:
911 08/1968-07/1973
912 08/1968-1969

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1965)

Additional Vehicle Info: 911,912

901-201-062-22/W – Fuel Bleeder Expansion Tank, White

Description:

Fuel bleeder expansion tank located under front cowl. White.

To fit:
911 08/1968-07/1973
912 08/1968-1969

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1965)

Additional Vehicle Info: 911,912

901-201-271-01 – Fuel or Oil Tank Cap, Without Lock

Description:

  • Made of metal
  • Without lock
To fit:
Fuel tank
356 B T6, C 1.6 08/1962-12/1965
911 1965-1977
912 1965-1969
911 (930) Turbo 3.0 1975-1977
Oil tank
911 1965-1971
914-6 1970-1972

Compatible Vehicles: - 356 (1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972) - 930 (1975,1976,1977)

Additional Vehicle Info: 356,911,912,914,930

901-201-311-00G – Fuel Tank Clamp

Description:

Fuel tank clamp for metal fuel tanks. 3 required per vehicle.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,912E,930

901-201-591-21 – Fuel Filler Neck Rubber Sleeve

Description:

Fuel filler neck rubber sleeve.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

901-211-003-00 – Heat Exchanger, Left

Description:

Heat exchanger for the left side.

Painted mild steel.

To fit:
914-6 1970-1972

Compatible Vehicles: - 914 (1970,1971,1972)

Additional Vehicle Info: 914

901-211-004-00 – Heat Exchanger, Right

Description:

Heat exchanger for the right side.

Painted mild steel.

To fit:
914-6 1970-1972

Compatible Vehicles: - 914 (1970,1971,1972)

Additional Vehicle Info: 914

901-211-007-22 – Heater Control Flap, Left

Description:

Heater control flap, left.

Not for G50 models.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,912E,930

901-211-007-22/SS – Heater Control Flap, Left, Stainless Steel

Description:

Heater control flap in stainless steel, left.

Not for G50 models.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,912E,930

901-211-007-23 – Heater Control Flap, Red, Left

Description:

Heater control flap with red paint finish, left. Silicone gasket included.

Not for G50 models.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,930

901-211-008-22 – Heater Control Flap, Right

Description:

Heater control flap, right.

Not for G50 models.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,912E,930

901-211-008-22/SS – Heater Control Flap, Right, Stainless Steel

Description:

Heater control flap in stainless steel, right.

Not for G50 models.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,912E,930

901-211-008-23 – Heater Control Flap, Red, Right

Description:

Heater control flap with red paint finish, right. Silicone gasket included.

Not for G50 models.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,912E,930

901-211-051-22 – Clamp for Heater Hose Top, Left

Description:

Clamp for heater hose top with holder for heater cable, left.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,930

901-211-051-22/SS – Clamp for Heater Hose Top, Left, Stainless Steel

Description:

  • Rust-resistant stainless steel for long-lasting durability
  • Guaranteed precise fit for easy installation
  • 24-month unlimited mileage warranty
Upgrade your heater hose clamp with our high-quality stainless steel version, designed to outlast the OEM mild steel alternative. Unlike carbon steel, our stainless steel construction resists rust and corrosion, ensuring long-term durability and reliability. Say goodbye to premature failures and replacements caused by rusting clamps.

Designed for a perfect fit, this clamp securely holds your heater hose and cable in place, offering superior resistance to engine heat and oil exposure. Backed by a Limited Lifetime Warranty, this is the last heater hose clamp you’ll ever need to buy.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

901-211-052-22 – Clamp for Heater Hose Top, Right

Description:

Clamp for heater hose top with holder for heater cable, right.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,930

901-211-052-22/SS – Clamp for Heater Hose Top, Right, Stainless Steel

Description:

  • Rust-resistant stainless steel for long-lasting durability
  • Guaranteed precise fit for easy installation
  • 24-month unlimited mileage warranty
Upgrade your heater hose clamp with our high-quality stainless steel version, designed to outlast the OEM mild steel alternative. Unlike carbon steel, our stainless steel construction resists rust and corrosion, ensuring long-term durability and reliability. Say goodbye to premature failures and replacements caused by rusting clamps.

Designed for a perfect fit, this clamp securely holds your heater hose and cable in place, offering superior resistance to engine heat and oil exposure. Backed by a Limited Lifetime Warranty, this is the last heater hose clamp you’ll ever need to buy.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,912,930

901-211-194-01 – Heater Air Hose, Engine to Heat Exchanger

Description:

Heater hot air hose from the heat exchanger to the engine.

To fit:
911 1965-1974 fits left and right side
911 (930) Turbo 1975-1989 fits right side only

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

901-211-195-01 – Heater Air Hose, Engine to Heat Exchanger, Left

Description:

Heater hot air hose from the heat exchanger to the engine. Fits left side only.

To fit:
911 2.7-3.0 1975-1983
914-6 1970-1972

Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

901-300-901-00 – Gearbox Gasket Set, Manual with Chilled Aluminium Case

Description:

Gearbox gasket set for 901 type manual transmission with chilled aluminium case.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 911,912

901-300-916-00 – Gearbox Gasket Set, Manual with Magnesium Case

Description:

Gearbox gasket set for manual transmission with die cast magnesium case.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: 911

901-331-026-00 – Wheel Bearing, Inner Rear

Description:

Inner rear wheel bearing. German OEM quality.

Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 911,912

901-331-026-99 – Wheel Bearing Kit, Rear

Description:

Rear wheel bearing kit, left or right. 2 required per vehicle.

Kit includes:
1x Inner bearing (German OEM)
1x Outer bearing (Porsche)
1x Inner seal (Porsche)
1x Outer seal (Classic Line)
1x O-ring (Porsche)
1x Split pin for hub nut

Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 911,912

901-331-059-00 – Rear Trailing Arm Bush, Inner

Description:

Rear trailing arm inner bush. Sold each, 4 required per vehicle.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

901-331-059-00/HD – Rear Trailing Arm Bush, Inner, Heavy Duty

Description:

Rear trailing arm inner bush, heavy duty. Sold each, 4 required per vehicle.

- Club Sport version
- 30% stiffer than OE part
- OE trailing arm bushing dimensions for correct alignment and smooth ride
- Restores proper suspension handling and braking stability
- High-quality heat-resistant elastomer and metal materials for maximum durability
- 24 month unlimited mileage warranty

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,912E,930

901-331-065-09 – Rear Wheel Hub

Description:

  • Fits left or right
  • Supplied without studs
  • 24 Month Unlimited Mileage Warranty

This rear wheel hub is designed for a precise fit and helps reduce wheel play and vibration. It helps restore load-bearing capability and improves ride quality. Made from durable materials, it resists wear and driving stress.

To fit:
911 1969-1973
912 1969
914-6 1970-1972

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,912,914

901-331-065-09/S – Rear Wheel Hub, with studs

Description:

  • Fits left or right
  • Studs pre-installed for convenience
This rear wheel hub is designed for a precise fit and helps reduce wheel play and vibration. It helps restore load-bearing capability and improves ride quality. Made from durable materials, it resists wear and driving stress.

To fit:
911 1969-1973
912 1969
914-6 1970-1972

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,912,914

901-331-107-00 – Spacer Ring for Rear Axle

Description:

Spacer ring for rear axle, located behind the spring plate cover. 2 required per vehicle.

To fit:
911 1965-1977
912 1965-1969
911 (930) Turbo 1975-1977

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977)

Additional Vehicle Info: 911,912,912E,930

901-331-571-07 – Ball Pin for Rear Anti-Roll Bar

Description:

Ball pin (articulated bolt) for rear anti-roll bar.

To be welded to the rear trailing arm when updating cars without anti-roll bar.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)

Additional Vehicle Info: 911,912

901-332-191-00 – CV Joint Spreader Plate

Description:

  • 3 required per CV joint
  • For M8 CV bolts only
To fit:
911 1965-1968
912 1965-1968
914 1970-1976

Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 911,912,914

901-332-232-00 – Drive Shaft Stub Axle Flange

Description:

Stub axle flange for the drive shaft.

To fit:
911 1969-1973
911 1974-1983 SPM Sportomatic models only

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

901-332-293-12 – CV Boot Kit

Description:

CV joint rubber boot kit, located at each end of the drive shafts. Fits left and right, inner and outer. 4 required per vehicle.

Includes clip, circlip, conical washer and grease sachet.

To fit:
911 1969-1975 (with 4 bolt driveshaft)
911 (930) Turbo 3.0 1975-1977
911 (930) Turbo 3.3 1978-1986

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)

Additional Vehicle Info: 911,930

901-332-297-00 – CV Joint to Drive Shaft Flange Gasket

Description:

CV joint to driveshaft flange gasket. 4 required per vehicle.

To fit:
911 1969-1973
911 1974-1983 SPM only
912 1969 only

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 912 (1969)

Additional Vehicle Info: 911,912

901-333-003-07 – Spring Plate with Bushes, Rear

Description:

  • Includes standard rubber bushes
  • Fits left or right
To fit:
911 10/1964-07/1968
912 01/1965-07/1968

Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 911,912

901-333-003-09 – Spring Plate with Bushes, Rear

Description:

  • Includes standard rubber bushes
  • Fits left or right
To fit:
911 08/1968-07/1976
911 (930) Turbo 08/1974-07/1976
912 08/1968-07/1969

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976) - 912 (1969) - 930 (1975,1976)

Additional Vehicle Info: 911,912,912E,930

901-333-153-00 – Spring Plate Cover

Description: Rear spring plate cover. Fits left or right.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,912E,930

901-333-153-00/SS – Spring Plate Cover, Stainless Steel

Description:

  • Rust-resistant stainless steel for long-lasting durability
  • OE-style finish for an authentic factory look
  • Guaranteed fit for hassle-free installation
This rear spring plate cover is crafted from high-strength stainless steel, ensuring durability and corrosion resistance. Unlike mild steel alternatives, it won’t rust, providing long-lasting performance. Designed to match the original part, it maintains an OE-style finish for an authentic restoration.

Engineered for a precise fit, this cover restores a secure torsion bar attachment, essential for proper suspension movement and vehicle handling. Its premium alloy metal construction guarantees maximum strength, while the included 24-month unlimited mileage warranty offers peace of mind.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,912E,930

901-333-195-00 – Bush Rear Spring Plate Outer

Description:

Rear spring plate outer rubber bush.

Compatible Vehicles: - 911 (1965,1966,1967) - 912 (1965,1966,1967)

Additional Vehicle Info: 911,912

Is this article helpful?
1 1 2
Leave a Comment
 
Attach a file