Fitment #206

PC1110069 – Sports Exhaust Rear Silencer, OE Style, Stainless Steel

Description:

Dansk Motorsport sports exhaust rear silencer, OE style with twin loose polished stainless steel tail pipes included (bolt on type).

Made from high quality 304/4301 stainless steel.

With TÜV/EEC Approval for 2.5L engine only.

To fit:
Boxster (986) 2.5 09/1996-07/1999 Installation kit 000-044-200-11 required (available from Porsche)
Boxster (986) 2.7-3.2 06/1999-12/2004

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

PC1110072 – Sports Exhaust Rear Silencer, OE Style, Stainless Steel

Description:

Dansk Motorsport sports exhaust rear silencer, OE style supplied without tail pipes.

Choice of 4 tail pipe styles available separately, or original tail pipe can be used: PC1110077, PC1110078, PC1110079, PC1110080.

Made from high quality 304/4301 stainless steel.

With TÜV/EEC Approval for 2.5L engine only.

To fit:
Boxster (986) 2.5 09/1996-07/1999 Installation kit 000-044-200-11 required (available from Porsche)
Boxster (986) 2.7-3.2 06/1999-12/2004

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

PC1110074 – Sports Exhaust Rear Silencer, Stainless Steel

Description:

Compatible Vehicles: - 986 Boxster (1997,1998,1999)

Additional Vehicle Info: 986 Boxster

PC1110075 – Sports Exhaust Rear Silencer, Stainless Steel

Description:

Dansk Motorsport sports exhaust rear silencer, with single polished stainless steel fixed oval tail pipe.

Made from high quality 304/4301 stainless steel.

With TÜV/EEC Approval for 2.5L engine only.

To fit:
Boxster (986) 2.5 09/1996-07/1999 Installation kit 000-044-200-11 required (available from Porsche)
Boxster (986) 2.7-3.2 06/1999-12/2004

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

PC1110076 – Sports Exhaust Rear Silencer, Stainless Steel

Description:

Dansk Motorsport sports exhaust rear silencer, with twin polished stainless steel fixed tail pipes.

Made from high quality 304/4301 stainless steel.

With TÜV/EEC Approval for 2.5L engine only.

To fit:
Boxster (986) 2.5 09/1996-07/1999 Installation kit 000-044-200-11 required (available from Porsche)
Boxster (986) 2.7-3.2 06/1999-12/2004

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

PC1110077 – Exhaust Tail Pipe, Twin OE Look, Stainless Steel

Description:

Dansk Motorsport exhaust tail pipe with twin ''OE Look'' polished stainless 95mm round outlets to fit sports rear silencers PC1110072 and PC1110073.

Made from high quality polished 304/4301 stainless steel.

To fit:
Boxster (986) 2.5-3.2 09/1996-12/2004

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

PC1110078 – Exhaust Tail Pipe, Twin OE Look, Stainless Steel

Description:

Dansk Motorsport exhaust tail pipe with twin polished stainless 80mm round outlets to fit sports rear silencers PC1110072 and PC1110073.

Made from high quality polished 304/4301 stainless steel.

To fit:
Boxster (986) 2.5-3.2 09/1996-12/2004

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

PC1110081 – Sports Exhaust Rear Silencer, Stainless Steel

Description:

Durable stainless steel construction
Polished 93x70 mm oval tailpipe
TÜV/EEC approved for 2.5L engine

Upgrade your vehicle's performance with the Dansk sport exhaust rear silencer. Crafted from durable stainless steel, it features a 93x70 mm polished oval tailpipe. Includes TUV/EEC approval for the 2.5 L engine.

To fit:

924S 2.5 08/0985-07/1988 engine code M44.07-08 + M44.10

944 2.5 06/1981-07/1991 engine code M44.01-08 + M44.10

944 2.7 06/1988-07/1991 engine code M44.12

Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: 924,944

PC1110081B – Sports Exhaust Rear Silencer, Stainless Steel with Black Tip

Description:

Dansk Original sports exhaust rear silencer, with single black stainless steel tail pipe. Replaces original part number 94411108301.

Made from high quality 304/4301 stainless steel.

With TÜV/EEC Approval.

To fit:
924S 2.5 08/0985-07/1988 engine code M44.07-08 + M44.10
944 2.5 06/1981-07/1991 engine code M44.01-08 + M44.10
944 2.7 06/1988-07/1991 engine code M44.12

Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: 924,944

PC1110083B – Sports Exhaust Rear Silencer, Stainless Steel with Black Tip

Description:

Made from AISI 304 and AISI 409 Stainless Steel
Solid machined flange ensures a secure and precise fit
Reinforced brackets offer increased stability and reliability

Transform your Porsche 944 Turbo with our premium exhaust system, featuring a 93x70mm black painted tailpipe. The solid machined flange ensures a secure and precise fit, while reinforced materials and brackets enhance durability and stability, reducing deterioration over time.

Without TÜV/EEC approval.

To fit:

944 Turbo 2.5 1986-1991

Compatible Vehicles: - 944 (1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: 944

PC1110084 – Vintage Speed Merged Exhaust System

Description:

100% stainless steel for durability
38mm merged headers for power up to 200HP
Twin polished tailpipes, approx. 500mm apart

Upgrade your classic Porsche with this high-performance Vintage Speed Merged Exhaust System. Crafted from 100% #304 stainless steel, this system features twin polished centre tailpipes spaced approximately 500mm apart for a sleek, high-performance look. Designed to also replace the heat exchangers, it removes the heating function, ensuring optimal performance without compromising durability.

With 38mm merged headers supporting up to 200HP, a calculated firing order for maximum torque and power, and a super-flow X-pipe chamber, this system delivers exceptional efficiency and sound. A 150mm diameter silencer balances power with reduced noise, while two threaded O2 sensor slots add versatility. Complete with silencer support clamps and backed by a 5-year manufacturer’s warranty, this is the ultimate upgrade for Porsche enthusiasts.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

PC1110086 – SSI Rear Exhaust Silencer

Description:

Rear exhaust silencer in matt stainless steel with single 60mm tailpipe. With TÜV/EEC approval.

To fit:
911 S 2.4 08/1971-07/1973 (mechanical. injection)
911 T/E/S 2.0-2.4 08/1964-12/1973 (not mechanical.injection)

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

PC1110087 – Sport Exhaust Rear Silencer, USA Spec

Description:

Dansk Motorsport sports exhaust rear silencer with two polished, straight 63mm Ø tail pipes in Carrera style (clamps included). Produces a deep sporty sound.

Painted aluminized mild steel (heat resistant paint).

To fit:
912 1965-1969 USA export spec models

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

PC1110091 – Vintage Speed Superflow Exhaust System

Description:

100% stainless steel for durability
Twin 50.8mm OD polished tailpipes
Flanged pipes for easier fitting

Upgrade your classic ride with the Vintage Speed Superflow Exhaust System, designed for both performance and durability. Crafted from 100% #304 stainless steel, this system features twin 50.8mm OD polished tailpipes for a sleek, high-performance look. Engineered for a perfect fit with original heat exchangers (USA export type) or J-tubes, it ensures smooth installation with flanged pipes that make fitting easier.

Built to last, this exhaust system comes with a 5-year manufacturer’s warranty, offering peace of mind and reliability. Whether you're restoring a classic or upgrading for enhanced performance, the Vintage Speed Superflow delivers style, quality, and long-lasting performance.

Compatible Vehicles: - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 912

PC1110097 – SSI Rear Exhaust Silencer

Description:

Rear exhaust silencer in matt stainless steel with single 60mm tailpipe. 2 inlet and 1 outlet for use with heat exchanger conversion to early style heat exchangers only.

With TÜV/EEC approval.

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110098 – SSI Racing Rear Exhaust Silencer, Twin Outlet

Description:

Rear racing exhaust silencer in matt stainless steel with bolt-on inlet flanges. Twin 63.50mm tailpipes with distance between tailpipes of 760mm. For racing use only.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

PC1110099 – SSI Rear Exhaust Silencer

Description:

Rear exhaust silencer in matt stainless steel with single 60mm tailpipe. 1 inlet and 1 outlet.

With TÜV/EEC approval.

To fit:
911 Carrera/SC 2.7, 3.0 1976-1983
911 Carrera 3.2 1984-1989

Compatible Vehicles: - 911 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110100 – Exhaust Fitting Kit for Rear Silencer

Description:

Exhaust fitting kit for the rear silencer.

Includes: 3x straps for rear silencer with bolts, 1x gasket, 3x nuts/bolts.

To fit:
911 08/1974-07/1983

Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

PC1110101 – Exhaust Fitting Kit for Pre Silencer

Description:

Exhaust fitting kit for the intermediate/pre silencer.

Includes: 3x gaskets plus all nuts and bolts for the 3 joints.

To fit:
911 08/1974-07/1989

Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110102 – Exhaust Fitting Kit for Heat Exchanger

Description:

Exhaust fitting kit for 1x heat exchanger.

Includes: 3x head to heat exchanger gasket, 1x heat exchanger to exhaust gasket plus all nuts and bolts.

To fit:
911 08/1983-07/1989

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110103 – Exhaust Fitting Kit for Heat Exchanger

Description:

Exhaust fitting kit for 1x heat exchanger.

Includes: 3x head to heat exchanger gasket, 1x heat exchanger to exhaust gasket plus all nuts and bolts.

To fit:
911 08/1974-07/1983

Compatible Vehicles: - 911 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

PC1110104 – Exhaust Fitting Kit for Heat Exchanger

Description:

Exhaust fitting kit for 1x heat exchanger.

Includes: 3x head to heat exchanger gasket, 1x heat exchanger to exhaust gasket plus all nuts and bolts.

To fit:
911 09/1964-07/1974

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: 911

PC1110105 – Exhaust Fitting Kit for Heat Exchanger

Description:

Exhaust fitting kit for 1x heat exchanger.

Includes: 3x head to heat exchanger gasket, 1x heat exchanger to exhaust gasket plus all nuts and bolts.

To fit:
911 (930) Turbo 3.0/3.3 01/1975-07/1989

Compatible Vehicles: - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 930

PC1110106 – Exhaust Adapter Kit for 3.6 Engine

Description:

Exhaust flange adapter kit. To be used when installing a 3.6L engine from a 964/993 into an earlier G-model 911 to retain the ''banana'' style original rear silencer.

Includes: Flange adapter, gaskets plus nut and bolts to fit.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110107 – Exhaust Fitting Kit for Rear Silencers Gillet

Description:

Exhaust fitting kit for the rear silencers.

Includes: 2x straps for rear silencers, 2x gasket ring, 4x clamps plus nuts and bolts.

To fit:
911 (993) C2/C4 10/1993-08/1998 with Gillet type silencers
911 (993) C2S/C4S 10/1995-08/1998 with Gillet type silencers
911 (993) RS 08/1994-08/1996 with Gillet type silencers

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

PC1110108 – Exhaust Fitting Kit for Rear Silencers Bischoff

Description:

Exhaust fitting kit for the rear silencers.

Includes: 2x straps for rear silencers, 4x clamps plus nuts and bolts.

To fit:
911 (993) C2/C4 10/1993-08/1998 with Bischoff type silencers
911 (993) C2S/C4S 10/1995-08/1998 with Bischoff type silencers
911 (993) RS 08/1994-08/1996 with Bischoff type silencers

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

PC1110109 – Exhaust Tail Pipe Fitting Kit

Description:

Exhaust fitting kit for the tail pipe in stainless steel.

Includes: 1x clamp with bolt, 1x gasket.

To fit:
911 (964) C2/C4/RS 12/1988-07/1994

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110110 – Exhaust Fitting Kit for Cross Pipe Gillet

Description:

Exhaust fitting kit for the rear cross pipe from the heat exchangers to the catalytic converter.

Includes: 2x clamp, 2x gasket ring, 2x gasket plus nuts and bolts.

To fit:
911 (993) C2/C4 10/1993-08/1998 with Gillet type cat
911 (993) C2S/C4S 10/1995-08/1998 with Gillet type cat
911 (993) RS 08/1994-08/1996 with Gillet type cat

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

PC1110111 – Exhaust Fitting Kit for Cross Pipe Bischoff

Description:

Exhaust fitting kit for the rear cross pipe from the heat exchangers to the catalytic converter.

Includes: 2x clamp, 2x gasket plus nuts and bolts.

To fit:
911 (993) C2/C4 10/1993-08/1998 with Bischoff type cat
911 (993) C2S/C4S 10/1995-08/1998 with Bischoff type cat
911 (993) RS 08/1994-08/1996 with Bischoff type cat

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

PC1110112 – Exhaust Fitting Kit for Rear Silencers

Description:

Exhaust fitting kit for the rear silencers (both sides).

Includes: 2x sleeves with clamps, 2x clamps plus all nut and bolts required.

To fit:
911 (996) 09/1997-07/2005 not Turbo models
911 (996) GT3 03/1999-07/2005

Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)

Additional Vehicle Info: 996

PC1110113 – Exhaust Fitting Kit for Rear Silencers

Description:

Exhaust fitting kit for the rear silencers (both sides).

Includes: 2x sleeves with clamps plus all nut and bolts required.

To fit:
911 (997) C2/C4/C2S/C4S 07/2004-07/2008

Compatible Vehicles: - 997 (2005,2006,2007,2008)

Additional Vehicle Info: 997

PC1110114 – Exhaust Fitting Kit for Catalytic Converters

Description:

Exhaust fitting kit for the catalytic converters (both sides).

Includes: 2x sleeves with clamps, 2x gaskets plus all nuts, bolts and fittings required.

To fit:
Boxster (986) 2.5 09/1996-07/1999

Compatible Vehicles: - 986 Boxster (1997,1998,1999)

Additional Vehicle Info: 986 Boxster

PC1110115 – SSI Exhaust Rear Silencer, GT3 Style

Description:

Rear exhaust silencer in matt stainless steel, “GT3” style with dual 63mm centre tail pipes. With TÜV/EEC approval.

To fit:
911 1965-1973
914-6 1970-1972

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 914 (1970,1971,1972)

Additional Vehicle Info: 911,914

PC1110116 – Adapter Set for Tail Pipes, for mounting S-tail pipes on a standard model

Description:

Adapter set for tail pipes, can be used to mount original S tail pipes on standard model silencers.

Also required when fitting Dansk Motorsport rear silencers PC1110059, PC1110061, PC1110062 to S models if the original S tail pipes are to be retained.

Compatible Vehicles: - 997 (2005,2006,2007,2008)

Additional Vehicle Info: 997

PC1110117 – Exhaust Rear Silencer, Carrera Style

Description:

Sports exhaust rear silencer, with two straight tailpipes in Carrera style. Deep sporty sound. Tail pipes constructed to fit perfectly with Carrera rear lower panel, but will come out just under the car body on "non Carreras".

To fit:
356 A/B/C 1.6 1955-1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

PC1110118 – Exhaust Rear Silencer, Sport

Description:

Sports exhaust rear silencer, with single 45mm diameter tail pipe. Painted steel.

To fit:
356 A 1.5 1955-1961

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

PC1110119 – Exhaust Tail Pipe, Stainless Steel

Description:

Exhaust tail pipe, polished stainless steel. 45.5x170x60 mm.

Suitable for rear silencers PC110117 and PC1110118.

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

PC1110120 – Exhaust Kit with Heat Exchangers, Stainless Steel with Painted Silencer

Description:

Complete exhaust kit in stainless steel, with heat exchangers, catalytic converter and painted stainless steel OE style silencer with a single tailpipe. Silencer has been glass bead blasted and painted to retain the standard look and will sound the same as an OE silencer.

With TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110121 – Exhaust Kit with Heat Exchangers, Stainless Steel with Polished Silencer

Description:

Complete exhaust kit in stainless steel, with heat exchangers, catalytic converter and polished stainless steel sports silencer with a single tailpipe. Gives an increase in BHP and a sportier sound.

With TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110122 – Exhaust Kit with Heat Exchangers, Stainless Steel without Catalytic Converter

Description:

Complete exhaust kit in stainless steel, with heat exchangers, catalytic converter bypass and polished stainless steel sports silencer with a single tailpipe. Gives an increase in BHP and a sportier sound.

WITHOUT TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110123 – Exhaust Kit, Stainless Steel with Catalytic Converter Bypass and Centre Silencer Bypass

Description:

Complete exhaust kit in stainless steel, with catalytic converter bypass, centre silencer bypass and polished stainless steel sports silencer with a single tailpipe. Gives an increase in BHP and a louder sportier sound.

WITHOUT TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110124 – Exhaust Kit with Heat Exchangers, Twin Tailpipe Stainless Steel with Polished Silencer

Description:

Complete exhaust kit in stainless steel, with heat exchangers, catalytic converter and polished stainless steel sports silencer with dual tailpipes. Gives an increase in BHP and a sportier sound.

With TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110125 – Exhaust Kit, Stainless Steel with Catalytic Converter Bypass and Rear Silencer Bypass

Description:

Complete exhaust kit in stainless steel, with catalytic converter bypass, centre silencer and G-pipe rear silencer bypass with a single tailpipe. Gives an increase in BHP and a much louder sportier sound.

WITHOUT TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110126 – Exhaust Kit, Stainless Steel with Catalytic Converter/Centre/Rear Silencer Bypass

Description:

Complete exhaust kit in stainless steel, with catalytic converter bypass, centre silencer bypass and G-pipe rear silencer bypass with a single tailpipe. This system is VERY LOUD and may not be street legal, please check before purchase!

WITHOUT TÜV/EEC approval.

To fit:
911 (964) C2, C4 1989-1994 (not Turbo models)

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110127 – Twin Outlet Sports Exhaust Rear Silencer, Stainless Steel

Description:

Dansk Motorsport twin outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.

Made from high quality polished 304/4301 stainless steel with dual 50mm polished tips.

To fit:
911 S 2.4 (mech. injection) 08/1971-07/1973
911 T/E/S 2.0-2.4 (not mech. injection) 1965-07/1973
911 /S/Carrera 2.7 08/1973-07/1975

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975)

Additional Vehicle Info: 911

PC1110128 – Twin Outlet Sports Exhaust Rear Silencer

Description:

Dansk Motorsport twin outlet sports exhaust rear silencer giving an increase in BHP and a deeper sound.

Made from painted aluminized steel with dual 50mm tips.

To fit:
911 S 2.4 (mech. injection) 08/1971-07/1973
911 T/E/S 2.0-2.4 (not mech. injection) 1965-07/1973
911 /S/Carrera 2.7 08/1973-07/1975

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975)

Additional Vehicle Info: 911

PC1110129 – Sports Exhaust Kit with Heat Exchangers, Stainless Steel, 84mm Tail Pipe

Description:

Ø84 mm single tail pipe
No tinware mods; heating system stays functional
Stainless steel build for lasting performance

This stainless steel performance exhaust kit is engineered for 3.2L engines and includes an Ø84 mm single tail pipe and heat exchangers. It installs without the need to modify or replace the original tinware, making it a hassle-free upgrade. The existing heating system remains fully functional, ensuring comfort and performance. The single tail pipe fits perfectly with the standard lower rear valance panel.

The heat exchangers are designed to connect seamlessly to a rear 2-in-1-out silencer, delivering improved exhaust flow and a sportier sound. Ideal for enthusiasts seeking both performance and practicality in a durable stainless steel package.

To fit:

911 3.2 1984-1989

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110130 – SSI Rear Exhaust Silencer

Description:

Rear exhaust silencer in matt stainless steel with single 60mm tailpipe. 2 inlet and 1 outlet.

With TÜV/EEC approval for 2.7 engine only.

To fit:
911 2.7 08/1973-07/1975
911 3.0 08/1975-07/1983 with conversion to early style heat exchangers

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

PC1110131 – Sports Exhaust Kit with Heat Exchangers, Stainless Steel, Twin 90mm

Description:

Ø90 mm twin GT3 style tail pipes
No tinware mods; heating system stays functional
Stainless steel build for lasting performance

This stainless steel performance exhaust kit is engineered for 3.2L engines and includes Ø90 mm twin GT3 style centre exit tail pipes and Ø41 mm heat exchangers. It installs without the need to modify or replace the original tinware, making it a hassle-free upgrade. The existing heating system remains fully functional, ensuring comfort and performance. The lower rear valance panel will require modification, or use the Dansk fibreglass panel.

To fit:

911 3.2 1984-1989

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110132 – Sebring Style Sport Exhaust with Manifolds, Oval Tail Pipe

Description:

Sporty Sebring style design
Free-flowing mufflers for optimal performance
Glass bead blasted stainless steel

Enhance your vehicle’s performance with the Dansk Motorsport manifold exhaust. Featuring a sleek, Sebring style design, this exhaust system includes 8 mm flanges and free-flowing mufflers, ensuring minimal restriction and optimal exhaust flow. The result is a more aggressive exhaust note that delivers a sportier and more satisfying driving experience compared to the stock exhaust system.

Constructed from high-quality, glass bead blasted stainless steel, this exhaust system not only looks great but is also built to last. Experience the perfect blend of style, durability, and performance with the Dansk Motorsport manifold exhaust, designed to give your vehicle a distinctive edge on the road.

To fit:

356 A/B/C 1.5-1.6 01/1955-12/1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

PC1110133 – Sebring Style Sport Exhaust with Manifolds, Round Tail Pipe

Description:

Sporty Sebring style design
Free-flowing mufflers for optimal performance
Glass bead blasted stainless steel

To fit:

356 A/B/C 1.5-1.6 01/1955-12/1965

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

PC1110134 – SSI Exhaust Kit with 41mm Heat Exchangers

Description:

Fits with standard G-model tinware
Single 70mm tailpipe
AISI304 stainless steel construction for durability

Transform your 3.2-litre Carrera engine with our performance-optimised free-flow system. Engineered to significantly increase horsepower, this system utilises Ø41mm OD pipework paired with a Ø60mm inflow to the exhaust, ensuring maximum power output. Designed for seamless integration, it fits perfectly with standard G-model tinware, so no need to replace your existing setup. With O2 sensors on both sides and a Ø70mm tailpipe, the system not only boosts performance but also enhances the exhaust sound.

Crafted entirely from durable AISI304 stainless steel, this exhaust system is built to last. The precise engineering ensures optimal compatibility and effortless installation, making it an ideal upgrade for those looking to enhance their engine's performance without extensive modifications.

To fit:

911 Carrera 3.2 1984-1989 without catalytic converter

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110135 – SSI Exhaust Kit with 41mm Heat Exchangers and Catalytic Converters

Description:

Fits with standard G-model tinware
Single 70mm tailpipe
AISI304 stainless steel construction for durability
With catalytic converters

To fit:

911 Carrera 3.2 1984-1989 with catalytic converter

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110136 – SSI Exhaust Kit with 41mm Heat Exchangers, Twin Tailpipes

Description:

Fits with standard G-model tinware
Twin 70mm tailpipes
AISI304 stainless steel construction for durability

Transform your 3.2-litre Carrera engine with our performance-optimised free-flow system. Engineered to significantly increase horsepower, this system utilises Ø41mm OD pipework paired with a Ø60mm inflow to the exhaust, ensuring maximum power output. Designed for seamless integration, it fits perfectly with standard G-model tinware, so no need to replace your existing setup. With O2 sensors on both sides and twin Ø70mm tailpipes, the system not only boosts performance but also enhances the exhaust sound.

To fit:

911 Carrera 3.2 1984-1989 without catalytic converter

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110137 – SSI Exhaust Kit with 41mm Heat Exchangers and Catalytic Converters

Description:

Fits with standard G-model tinware
Twin 70mm tailpipes
AISI304 stainless steel construction for durability
With catalytic converters

Transform your 3.2-litre Carrera engine with our performance-optimised free-flow system. Engineered to significantly increase horsepower, this system utilises Ø41mm OD pipework paired with a Ø60mm inflow to the exhaust, ensuring maximum power output. Designed for seamless integration, it fits perfectly with standard G-model tinware, so no need to replace your existing setup. With O2 sensors on both sides and twin Ø70mm tailpipes, the system not only boosts performance but also enhances the exhaust sound.

To fit:

911 Carrera 3.2 1984-1989 with catalytic converter

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110138 – SSI Exhaust Kit with 41mm Heat Exchangers, GT3 Tailpipes

Description:

Stylish GT3 style dual tailpipes
Enhanced gas flow with Ø41 mm tubes
AISI304 stainless steel construction for durability

Elevate your vehicle's performance and sound with our SSI Exhaust Kit, featuring dual center-mounted Ø63 mm "GT3" tailpipes. This kit includes "Big Bore" heat exchangers with Ø41 mm tubes, designed to enhance gas flow and boost power output. Crafted from AISI304 stainless steel, this system guarantees long-lasting durability and a perfect fit.

For 2.7/3.0 models additional oil tubes and the removal of the lower rear panel may be required. With SSI stainless steel construction, this exhaust set not only offers increased power but also delivers an unmatched, sporty aesthetic.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

PC1110139 – Sport Exhaust Rear Silencer, GT3 Style

Description:

GT3-style, dual Ø90 mm tailpipes
Polished stainless steel construction
Compatible with heat exchanger conversion (PC2110006)

The Dansk Motorsport Exhaust rear silencer offers a sleek GT3 style, featuring two Ø90 mm center tailpipes for a bold look and enhanced performance. Constructed from high-quality polished stainless steel, it’s designed for durability and precision. Perfect for those upgrading with a heat exchanger conversion, this silencer delivers both style and function for motorsport enthusiasts.

To fit:

911 Carrera 3.2 1984-1989 with heat exchanger conversion

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110140 – Racing Exhaust Set with Manifolds, No Heating

Description:

OE design
Replaces the heat exchangers (no heating function)
Not recommended for road use

To fit:

356 Carrera 1.6 01/1955-12/1961

Compatible Vehicles: - 356 (1950,1955,1957,1958,1959,1960,1961)

Additional Vehicle Info: 356

PC1110141 – Sports Exhaust Silencer Set, Sound Version, Stainless Steel

Description:

Aggressive sporty sound
Polished stainless steel ensures durability and style
Boosts power and improves throttle response

Elevate your driving experience with the Dansk Motorsport "Super Sound" Rear Silencer Set. Crafted from high-quality polished stainless steel, this exhaust system enhances both the aesthetics and performance of your vehicle. Its aggressive, sporty sound delivers a thrilling auditory experience while boosting throttle response and power output. Perfect for drivers seeking a dynamic upgrade, this system transforms your ride into a symphony of performance and style.

Sold as a pair, this exhaust set is ideal for enthusiasts who crave a louder, more exhilarating exhaust note. If you prefer a quieter option with a touch of sportiness closer to OEM standards, consider the Dansk PC1110067 or PC1110063 alternatives. Whichever you choose, quality and performance are guaranteed.

To fit:

911 (997) 3.6 C2, C4 07/2008-07/2012 not Turbo/GT2/GT3

Compatible Vehicles: - 997 (2009,2010,2011,2012)

Additional Vehicle Info: 997

PC1110142 – Sports Exhaust Rear Silencer, Twin 60mm Tailpipes

Description:

Durable aluminized steel with heat-resistant finish
Twin 60mm tailpipes
Offers a deeper sound and improved performance

This sports exhaust rear silencer is built with painted aluminized steel for added durability over standard steel. It features a grey high-temperature heat-resistant finish and twin 60mm tailpipes. Designed to enhance performance, it provides a modest boost in BHP and a deeper, more refined exhaust sound.

To fit:

911 T/E/S 2.0-2.4 10/1964-07/1973 (not mech. injection)

911 including S/Carrera 2.7 08/1973-07/1975

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975)

Additional Vehicle Info: 911

PC1110143 – Sports Exhaust Rear Silencer, GT3 Style

Description:

Durable aluminized steel with heat-resistant finish
Twin 63mm centre tailpipes
Offers a deeper sound and improved performance

This sports exhaust rear silencer is built with painted aluminized steel for added durability over standard steel. It features a grey high-temperature heat-resistant finish and twin 63mm GT3 style tailpipes. Designed to enhance performance, it provides a modest boost in BHP and a deeper, more refined exhaust sound.

To fit:

911 2.0-2.4 10/1964-07/1973

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

PC1110144 – Sports Exhaust Rear Silencer, Twin 76mm Centre Tailpipes

Description:

Durable aluminized steel with heat-resistant finish
Twin 76mm polished stainless steel tailpipes
Offers a deeper sound and improved performance

This sports exhaust rear silencer is built with painted aluminized steel for added durability over standard steel. It features a grey high-temperature heat-resistant finish and twin centre 76mm tailpipes. Designed to enhance performance, it provides a modest boost in BHP and a deeper, more refined exhaust sound.

To fit:

911 T/E/S 2.0-2.4 10/1964-07/1973 (not mech. injection)

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

PC1110145 – Sports Exhaust Rear Silencer, GT3 Style 90mm Centre Tailpipes

Description:

Durable aluminized steel with heat-resistant finish
Twin 90mm polished stainless steel tailpipes
Designed for a sporty, refined sound under acceleration

Upgrade your G-model 911 with this dual centre-exit exhaust, designed to provide a sporty sound without being overpowering. Made from aluminized steel, it delivers a balanced tone—potent at idle, but never intrusive during city driving or cruising. With sound levels kept at 76 dB in normal conditions and below 85 dB under heavy acceleration, it offers a refined driving experience with minimal resonance or drone.

This exhaust is a great choice for those who want to enhance their car’s character while keeping things practical. It’s engineered to bring out the best in your 911, offering a touch of sportiness that stays enjoyable on any drive.

To fit:

911 2.7-3.0 1976-1983

911 3.2 Carrera 1984-1989

Compatible Vehicles: - 911 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110146 – nan

PC1110147 – nan

PC1110148 – Sports Exhaust Rear Silencer, GT3 Style

Description:

Two GT3 style Ø70 mm centre tail pipes
Durable stainless steel construction
Polished stainless steel tail pipes

Enhance your vehicle's performance with the Dansk Motorsport exhaust rear silencer, Sport version. Featuring two GT3 Ø70 mm centre tail pipes, this silencer is crafted from high-quality stainless steel, ensuring durability and a refined appearance. The polished stainless steel tail pipes add a touch of elegance, making it a perfect upgrade for any car enthusiast.

To fit:

911 (964) C2, C4 3.6 1989-1994

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1110150 – SSI Sports Exhaust Rear Silencer, Twin 70mm Tailpipes

PC1110151 – SSI Sports Exhaust Rear Silencer, Single 70mm Tailpipe

PC1110152 – SSI Racing Exhaust Kit with 41mm Heat Exchangers, Twin 63.5mm Tailpipes

PC1110153 – Sports Exhaust Kit with Heat Exchangers, Stainless Steel, Twin 84mm Tail Pipes

Description:

Ø84 mm twin tail pipes
No tinware mods; heating system stays functional
Stainless steel build for lasting performance

This stainless steel performance exhaust kit is engineered for 3.2L engines and includes Ø84 mm twin tail pipes and heat exchangers. It installs without the need to modify or replace the original tinware, making it a hassle-free upgrade. The existing heating system remains fully functional, ensuring comfort and performance.

To fit:

911 3.2 1984-1989

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC1110154 – Sports Exhaust Rear Silencer, ANSA Style, Two Twin Tailpipes

Description:

Twin silencers with twin tailpipes
Designed for Porsche 911F models
Retro ANSA-style with premium detailing

Celebrate 50 years of JP Group excellence with this ANSA-like sport exhaust, crafted specifically for the classic 911F model. Featuring twin silencers and two twin tailpipes, this Dansk Motorsport Retro-version delivers both performance and style. Now available to order, it’s a standout upgrade for enthusiasts seeking authenticity and sound.

Every detail is carefully considered—from the shape and baffling of the tailpipes to their precise positioning—ensuring a refined look and optimal performance. This exhaust is a tribute to heritage, engineered with modern precision.

To fit:

911 T/E/S (not mech.injection) 2.0-2.4 10/1964-07/1973

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 911

PC1130001 – Sports Catalytic Converter, 100 Cell, Stainless Steel

Description:

Dansk Motorsport sports catalytic converter with ceramic insert. 100 cell with lambda sensor hole and plug.

Made from high quality polished 304/4301 stainless steel.

To fit:
911 (964) C2/C4/RS 12/1988-07/1994

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1130002 – Catalytic Converter Bypass Pipe, Stainless Steel

Description:

Dansk Motorsport catalytic converter bypass pipe/dummy cat without ceramic insert. With lambda sensor hole and plug.

Made from high quality polished 304/4301 stainless steel.

To fit:
911 (964) C2/C4/RS 12/1988-07/1994

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

PC1130003 – Catalytic Converter Bypass Pipe, Stainless Steel, Gillet

Description:

Dansk Motorsport catalytic converter bypass cross pipe set. With lambda sensor hole and plug.

Made from high quality 304/4301 stainless steel.

To fit:
911 (993) C2/C4 10/1993-08/1998 with Gillet system
911 (993) C2S/C4S 10/1995-08/1998 with Gillet type system
911 (993) RS 08/1994-08/1996 with Gillet type system

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

PC1130004 – Catalytic Converter Bypass Pipe, Stainless Steel, Bischoff

Description:

Dansk Motorsport catalytic converter bypass cross pipe set. With lambda sensor hole and plug.

Made from high quality brushed 304/4301 stainless steel.

To fit:
911 (993) C2/C4 10/1993-08/1998 with Bischoff system
911 (993) C2S/C4S 10/1995-08/1998 with Bischoff type system
911 (993) RS 08/1994-08/1996 with Bischoff type system

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

PC1130011 – Sports Catalytic Converter Set, 100 Cell, Stainless Steel

Description:

Dansk Motorsport sports catalytic converter set. 100 cell with lambda sensor hole.

Made from high quality polished 304/4301 stainless steel.

To fit:
Boxster (986) 2.5 10/1996-07/1999

Compatible Vehicles: - 986 Boxster (1997,1998,1999)

Additional Vehicle Info: 986 Boxster

PC1230001 – Turbo Wastegate Dump Pipe

Description:

Turbo wastegate dump pipe in stainless steel.

To fit:
911 (930) Turbo 3.3 09/1977-07/1982

Compatible Vehicles: - 930 (1978,1979,1980,1981,1982)

Additional Vehicle Info: 930

PC2010001 – Fuel Tank Cap Silver Aluminium

Description:

Fuel tank cap in silver anodised aluminium.

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 964,993

PC2010002 – Fuel Tank Cap RSR Look

Description:

Fuel tank cap “RSR look”, for use with Dansk “RSR look” bonnet and fuel filler.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,930

PC2010003 – Fuel Filler Kit RSR Look

Description:

Fuel filler kit “RSR look”, for use with Dansk “RSR look” bonnet with central fuel filler.

Suitable for use with 85 litre fuel tank only, requires welding.

IMPORTANT NOTE: For use with a NEW fuel tank only. Do not weld to your old fuel tank, fuel vapours are explosive, even when the tank is empty!

Additional Vehicle Info: 911,930

PC2010004 – Fuel Filler Kit, RSR Look, Silver Cap

Description:

Silver cap complements Porsche 914 aesthetics
Allows fuel filling through closed bonnet
Complete kit; some welding required

Upgrade your Porsche 914 with this RSR fuel filler kit, designed for fuel filling through the center of the bonnet while it remains closed. Featuring a silver-painted fuel cap, this complete kit includes all necessary components for installation, ensuring a professional finish.

Filler neck secures to the fuel tank with the original screws. Please note, the bonnet requires cutting and welding for the filler surround.

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

PC2010005 – Fuel Filler Kit, RSR Look, Polished Cap

Description:

Polished stainless steel cap
Allows fuel filling through closed bonnet
Complete kit; some welding required

Upgrade your Porsche 914 with this RSR fuel filler kit, designed for fuel filling through the center of the bonnet while it remains closed. Featuring a polished stainless steel fuel cap and bezel, this complete kit includes all necessary components for installation, ensuring a professional finish.

Filler neck secures to the fuel tank with the original screws. Please note, the bonnet requires cutting for the bezel ring to be screwed into place.

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

PC2010006 – Fuel Filler Kit, RSR Look with Singer Style Cap

Description:

Singer style fuel cap engraved with "FUEL"
Allows fuel filling through closed bonnet
Complete kit; some welding required

Upgrade your Porsche 911 with this RSR style fuel filler kit, designed for fuel filling through the center of the bonnet while it remains closed. Featuring a Singer style fuel cap, this complete kit includes all necessary components for installation, ensuring a professional finish.

Suitable for use with 85 litre fuel tank only, requires welding.

IMPORTANT NOTE: For use with a NEW fuel tank only. Do not weld to your old fuel tank, fuel vapours are explosive, even when the tank is empty!

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,912E,930

PC2110001 – SSI Heat Exchanger Set

Description:

Durable titanium-stabilised stainless steel
Boosts power in low and mid-RPM ranges
Resists corrosion even in harsh conditions

Upgrade your Porsche with the SSI Heat Exchanger Set, crafted entirely from AISI 321/EN4541 titanium-stabilised stainless steel. Designed for maximum durability, it withstands even the harshest conditions, including road salt, ensuring long-term reliability. The state-of-the-art heat exchanger design delivers a performance boost, particularly in the low and mid-RPM ranges.

With superior craftsmanship, increased power, and unmatched longevity, this heat exchanger set not only improves performance but also enhances the value of your Porsche for years to come. Engineered to withstand time and elements, it's the perfect upgrade for enthusiasts who demand the best.

To fit:

911 (carb) Europe 2.0 01/1963-07/1973

911 (carb) USA 2.0-2.4 08/1965-07/1971

911 (inj) Europe 2.0-2.4 08/1968-07/1971

911 (inj) USA 2.0-2.4 08/1968-07/1971

911 Europe 2.7 08/1973-07/1975

911 Europe 3.0 08/1977-07/1983

911 USA 2.7 08/1974-07/1975

911 USA 3.0 08/1977-07/1978

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

PC2110002 – SSI Heat Exchanger Set

Description:

For use when converting to twin inlet exhaust rear silencer
Improves low-to-mid RPM power output
Entirely crafted from AISI 304/321 stainless steel

Upgrade your Porsche 3.2 Carrera or 3.2L engine with the precision-engineered SSI stainless steel heat exchanger set. Perfect for use when backdating to emulate the classic style of early pre-impact bumper models, this system eliminates the pre-silencer and integrates seamlessly with a twin-inlet rear silencer. Designed for performance and longevity, these heat exchangers ensure optimal output, especially in the low-to-mid RPM range.

Crafted entirely from AISI 304/321 stainless steel, this heat exchanger set is built to withstand the harshest conditions, including road salt exposure, without compromising durability or appearance. Its state-of-the-art design not only enhances your engine’s performance but also delivers timeless style and reliability.

To fit:

911 Carrera 3.2 08/1983-07/1989 - Replacement oil hoses are also required, part numbers 91110772910 and 91110773910

IMPORTANT: Major modification needed on engine tin ware when installing on 3.2l engines

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC2110003 – SSI Heat Exchanger Set

Description:

Durable titanium-stabilized stainless steel
Boosts power in low and mid-RPM ranges
Resists corrosion even in harsh conditions

Upgrade your Porsche with the SSI Heat Exchanger Set, crafted entirely from AISI 321/EN4541 titanium-stabilized stainless steel. Designed for maximum durability, it withstands even the harshest conditions, including road salt, ensuring long-term reliability. The state-of-the-art heat exchanger design delivers a performance boost, particularly in the low and mid-RPM ranges.

To fit:

911 (inj) Europe 2.4 08/1971-07/1973
911 (inj) USA 2.2-2.4 08/1971-07/1973
911 Carrera Europe 2.7 08/1973-08/1975

Compatible Vehicles: - 911 (1972,1973,1974,1975)

Additional Vehicle Info: 911

PC2110005 – SSI Heat Exchanger Set, 41mm

Description:

Boosts performance in low/mid RPM ranges
41mm Ø tubing for enhanced flow
Durable AISI 304/321 stainless steel construction

Enhance your K-jet engine's performance with the SSI heat exchanger set, meticulously crafted from high-grade AISI 304/321 stainless steel. Designed for superior durability, this heat exchanger not only withstands harsh conditions, including road salt, but also ensures a perfect fit and finish. The 41 mm Ø outside tubing is optimised for better flow, significantly boosting output, especially in the low and middle RPM ranges.

This state-of-the-art heat exchanger offers not just longevity but also a noticeable performance improvement. Its advanced design maximises airflow, delivering a more responsive and efficient engine experience, making it an ideal upgrade for your vehicle.

To fit:

911 (carb) Europe 2.0 01/1963-07/1973

911 (carb) USA 2.0-2.4 08/1965-07/1971

911 (inj) Europe 2.0-2.4 08/1968-07/1971

911 (inj) USA 2.0-2.4 08/1968-07/1971

911 Europe 2.7 08/1973-07/1975

911 Europe 3.0 08/1977-07/1983

911 USA 2.7 08/1974-07/1975

911 USA 3.0 08/1977-07/1978

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 911

PC2110006 – Dansk Heat Exchanger Set, 41mm

Description:

Boosts performance in low/mid RPM ranges
41mm Ø tubing for enhanced flow
Durable stainless steel construction

Upgrade your exhaust system with the Dansk Motorsport heat exchanger set, crafted entirely from high-grade stainless steel. Designed specifically for use with early style rear silencers featuring 2 inlets and 1 outlet, this system ensures compatibility without sacrificing performance. With 41mm Ø outside tubing, it delivers improved exhaust flow, boosting power especially in the low to mid RPM range—ideal for spirited driving and daily use alike.

This heat exchanger set retains the use of all existing engine tinware, making installation seamless without the need for custom modifications. Built for longevity, it resists corrosion even in harsh road conditions, including exposure to salt. Its state-of-the-art design reflects both performance and durability, making it the perfect choice for enthusiasts who demand both style and substance.

To fit:

911 3.2 1984-1989

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC2110007 – SSI Heat Exchanger Set, 41mm

Description:

Boosts performance in low/mid RPM ranges
41mm Ø tubing for enhanced flow
Durable AISI 304/321 stainless steel construction

Upgrade your exhaust system with the premium SSI heat exchanger set, designed for use when converting to a twin inlet exhaust rear silencer. Crafted entirely from high-grade stainless steel (AISI 304/321), this heat exchanger is built to withstand even the harshest conditions, including road salt exposure, ensuring a long-lasting, high-performance solution. The 41 mm Ø outside tubing enhances flow, improving engine efficiency, particularly in the low and middle RPM ranges.

Engineered for excellence, the state-of-the-art design and finish provide a perfect fit and superior performance. This heat exchanger set not only enhances your vehicle's output but also guarantees durability and reliability, making it the ideal choice for those seeking both quality and performance in their exhaust system.

To fit:

911 Carrera 3.2 08/1983-07/1989 - Replacement oil hoses are also required, part numbers 91110772910 and 91110773910

IMPORTANT: Major modification needed on engine tin ware when installing on 3.2l engines

Compatible Vehicles: - 911 (1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

PC2110008 – Racing Exhaust Header Set without Heating

Description:

Racing exhaust header set without heating function, with pipes to connect to a 2 inlet rear silencer. Stainless steel.

Header pipes are 42mm ID inside, connector pipes to rear silencer are 47mm ID inside.

To fit:
911 2.0-2.7 1965-1977

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: 911

PC2110009 – Heat Exchanger, Stainless Steel, 41mm

Description:

Larger 41mm bores for increased exhaust gas flow
Made of stainless steel

Dansk introduces a new heat exchanger featuring larger 41mm bores, compared to the previous 39mm. This improvement, originally implemented by Porsche in 1984, increases exhaust gas flow for enhanced performance. Now, this pipe diameter is available for earlier Porsche Turbo models from 01/1975 to 07/1983, benefiting 3.0L and 3.3L engines with improved efficiency and power.

Compatible Vehicles: - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: 930

PC2110010 – Exhaust J-Tube, Left

Description:

Exhaust J-tube, left. J-tubes replace the heat exchangers, eliminating the heater and saving weight.

Primed mild steel.

To fit:
356 A 01/1955-12/1961
356 B T5 01/1959-08/1961 Europe
356 B/C 01-1959-12/1965 USA export spec models
912 1965-1969

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

PC2110011 – Exhaust J-Tube, Right

Description:

Exhaust J-tube, right. J-tubes replace the heat exchangers, eliminating the heater and saving weight.

Primed mild steel.

To fit:
356 A 01/1955-12/1961
356 B T5 01/1959-08/1961 Europe
356 B/C 01-1959-12/1965 USA export spec models
912 1965-1969

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

PC2110012 – Vintage Speed Exhaust J-Tubes, Pair, 38mm

Description:

Vintage Speed stainless steel J-tubes, supplied as a pair. J-tubes replace the heat exchangers, eliminating the heater and saving weight.

- 100% #304 stainless steel
- 5 year manufacturer’s warranty

Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

PC2110014 – SSI Heat Exchanger Set, 3.0 USA

Description:

Custom-fit for US 911 SC models 1980-83
Improves low-to-mid RPM power output
Entirely crafted from AISI 304/321 stainless steel

Revive your classic 911 SC with our premium SSI Heat Exchanger Set, manufactured specifically with 15mm flanges for US models (8/79-7/83). This system eliminates the pre-silencer and integrates with a twin-inlet rear silencer, they deliver improved performance and durability. Perfectly engineered to boost low-to-mid RPM output, they ensure your Porsche runs at its peak while retaining the charm of the original exhaust system.

Crafted entirely from AISI 304/321 stainless steel, this heat exchanger set is built to withstand the harshest conditions, including road salt exposure, without compromising durability or appearance. Its state-of-the-art design not only enhances your engine’s performance but also delivers timeless style and reliability.

To fit:
911 3.0 08/1979-07/1983 USA Spec only

Compatible Vehicles: - 911 (1980,1981,1982,1983)

Additional Vehicle Info: 911

PC2110020 – Heater Control Box Block Off Plate, Aluminium

Description:

Heater control box block off plate, black powder-coated aluminium. Used in place of the heater control flap when no heating is required inside the car. 2 required per vehicle.

To fit:
911/912 1965-1989
911 (930) Turbo 1975-1989

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

PC2510001 – Sports Rear Silencer with Tail Pipe

Description:

Dansk Motorsport sports exhaust kit, including Ø45 mm tail pipe and mounting kit.

To fit
914 1.7, 1.8 01/1969-02/1976

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

PC2560001 – SSI Heat Exchanger Set, 2.0

Description:

Construction entirely of AISI 321/EN4541 titanium stabilised stainless steel
Expected lifespan of 20-30 years
Easy and precise installation

Introducing the SSI state-of-the-art heat exchanger, designed and finished entirely with stainless steel AISI 321/EN4541 for unmatched durability. Built to withstand the harshest conditions, including road salt exposure, this product boasts an impressive expected lifespan of 20-30 years. The impeccable craftsmanship ensures not only exceptional performance but also a visually appealing addition to any system.

Each part of our heat exchanger is meticulously crafted with attention to detail. Utilizing Class A permanent tooling, the sheet metal is expertly formed and trimmed, while welding is performed using argon-shielded Tungsten Inert Gas (TIG) and high-energy spot welding techniques. Precise fixturing in the assembly process guarantees a perfect fit, making installation a seamless and satisfying experience.

To fit:

914/4 2.0 1972-1976

Compatible Vehicles: - 914 (1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

PC2560002 – SSI Heat Exchanger Set, 1.7-1.8

Description:

Construction entirely of AISI 321/EN4541 titanium stabilised stainless steel
Expected lifespan of 20-30 years
Easy and precise installation

Each part of our heat exchanger is meticulously crafted with attention to detail. Utilising Class A permanent tooling, the sheet metal is expertly formed and trimmed, while welding is performed using argon-shielded Tungsten Inert Gas (TIG) and high-energy spot welding techniques. Precise fixturing in the assembly process guarantees a perfect fit, making installation a seamless and satisfying experience.

To fit:

914/4 1.7, 1.8 1970-1976

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

PC2560003 – Racing Exhaust Header Set without Heating

Description:

Replaces the heat exchanger (no heating function)
Made of stainless steel

To fit:

914 1.7, 1.8 1970-1976

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

PC3310001 – Powerflex Bush Kit, Rear Trailing Arm Inner

Description:

Powerflex rear trailing arm inner bush kit complete with metal inserts.
The number of bushes in this kit is x2, this is the required amount to upgrade both inner trailing arm pivots.

To fit:
911 1965-1989
911 (930) Turbo 1974-1989

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Notes:Diagram ref no 10 Powerflex Part number PFR57-410 Replaces OE bush 90133105900

Additional Vehicle Info: 911,912,930