PC3310001H – Powerflex Heritage Bush Kit, Rear Trailing Arm Inner
Description:
Powerflex Heritage rear trailing arm inner bush kit complete with metal inserts.
The number of bushes in this kit is x2, this is the required amount to upgrade both inner trailing arm pivots.
To fit:
911 1965-1989
911 (930) Turbo 1974-1989
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
Diagram ref no 10 Powerflex Part number PFR57-410 Replaces OE bush 90133105900
Additional Vehicle Info: 911,912,930
PC3310003 – Powerflex Bush Kit, Rear Link Arm Inner
Description:
Powerflex rear link arm inner bush kit complete with metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade two rear link arm inner pivots.
To fit:
911 (996) 1997-2005
911 (997) inc. Turbo GT2, GT3 & GT3RS 2005-2012
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2005-2012
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram ref no 7 Powerflex Part number PFR57-507 To fit lower arm OE part number 99733104504
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997
PC3310004 – Powerflex Bush Kit, Outer Bush, Rear Upper Link Arm
Description:
Powerflex bush kit for the rear upper link arm. This is the outer bush complete with metal inserts and washers.
The number of bushes in this kit is x4; this is the required amount to upgrade x4 of the upper link arm outer pivots.
To fit:
911 (996) 1998-2005
911 (997) inc Turbo 2005-2012
Benefits of replacing your vehicle's OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram ref no 8 Powerflex Part number PFR57-508 On some early 997 models (pre 2006) there is no supporting lug on the upright to the outside faces of the outer bushes. For these models use 4 x PFR57-508 outer bush & 4 x PFR57-509 for the inner bush. For cars with lugs use 8 x PFR57-509.
Additional Vehicle Info: 996,997
PC3310005 – Powerflex Bush Kit, Rear Upper Link Arm Inner or Outer
Description:
Powerflex rear upper link arm bush kit complete with metal inserts and washers.
The number of bushes in this kit is x4; this is the required amount to upgrade x4 of the rear upper link arm inner or outer pivots depending on the vehicle please see fitments below.
To fit:
911 (996) 1997-2005 Rear Upper Link Arm Inner and Outer Bush
911 (997) 2005-2012 GT2, GT3 & GT3RS - Rear Upper Link Arm Inner Bush
911 (997) 2005-2012 GT2, GT3 & GT3RS - Rear Upper Link Arm Outer Bush
911 (997) 2005-2012 inc. Turbo - Rear Upper Link Arm Outer Bush 2006 on.
911 (997) 2005-2012 inc. Turbo - Rear Upper Link Arm Inner Bush
Benefits of replacing your vehicle's OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram ref no 8 and 9 Powerflex Part number PFR57-509 On some early 997 models (pre 2006) there is no supporting lug on the upright to the outside faces of the outer bushes. For these models use 4 x PFR57-508 outer bush & 4 x PFR57-509 for the inner bush. For cars with lugs use 8 x PFR57-509.
Additional Vehicle Info: 996,997
PC3310006 – Powerflex Bush Kit, Rear Subframe Front Mounting
Description:
Powerflex bush kit for the rear subframe front mounting point.
The number of bushes in this kit is x2, this is the required amount to upgrade both front mounting points on the rear subframe.
To fit:
911 (996) 1998-2005
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 11 Powerflex Part number PFR57-511
Additional Vehicle Info: 996
PC3310007 – Powerflex Bush Kit, Rear Subframe Rear Mounting
Description:
Powerflex bush kit for the rear subframe rear mounting points.
The number of bushes in this kit is x4, this is the required amount to upgrade both rear mounting points on the rear subframe.
To fit:
911 (996) 1998-2005
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 12 Powerflex Part number PFR57-512
Additional Vehicle Info: 996
PC3310008 – Powerflex Bush Kit, Front Upper Link Arm Inner Rear Bush
Description:
Powerflex bush kit for the front upper link arm. This is the inner bush for the rear of the arm complete with metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade both rear upper front link arm inner bush pivots.
To fit:
911 (993) 1994-1998
Benefits of replacing your vehicle's OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased Tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 10 Powerflex Part number PFR57-910
Additional Vehicle Info: 993
PC3310009 – Powerflex Bush Kit, Rear Upper Link Arm Rear Inner Bush
Description:
Powerflex bush kit for the Rear upper link arm. This is the rear inner bush complete with metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade both rear upper front link arm inner bush pivots.
To fit:
911 (993) 1994-1998
Benefits of replacing your vehicle's OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 11 Powerflex Part number PFR57-911
Additional Vehicle Info: 993
PC3310010 – Powerflex Bush Kit, Rear Lower Wishbone Inner Rear Bush
Description:
Powerflex bush kit for the rear lower wishbone rear inner bush, complete with metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade both wishbone rear inner bushes.
To fit:
911 (993) 1994-1998
Benefits of replacing your vehicle's OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 12 Powerflex Part number PFR57-912
Additional Vehicle Info: 993
PC3310011 – Powerflex Bush Kit, Rear Subframe Mountings
Description:
Powerflex bush kit for the left and right rear subframe mounting points.
The number of bushes in this kit is x4, this is the required amount to upgrade all mounting points on the left and right rear subframes.
To fit:
911 (993) 1994-1998
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 20 Powerflex Part number PFR57-920
Additional Vehicle Info: 993
PC3330001 – Powerflex Bush Kit, Rear Trailing Arm Support Plate
Description:
Powerflex bush kit for the rear trailing arm support plate.
The number of bushes in this kit is x2, this is the required amount to upgrade both trailing arm support plates.
To fit:
911 1965-1967
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 911 (1965,1966,1967) - 912 (1965,1966,1967)
Notes:Diagram ref no 11 Powerflex Part number PFR57-411
Additional Vehicle Info: 911,912
PC3330002 – Powerflex Bush Kit, Rear Trailing Arm Support Plate
Description:
Powerflex bush kit for the rear trailing arm support plate.
The number of bushes in this kit is x2, this is the required amount to upgrade both trailing arm support plates.
To fit:
911 1968-1989
911 (930) Turbo 1975-1989
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 911 (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:Diagram ref no 11 Powerflex Part number PFR57-409
Additional Vehicle Info: 911,912,930
PC3330002H – Powerflex Heritage Bush Kit, Rear Trailing Arm Support Plate
Description:
Powerflex Heritage bush kit for the rear trailing arm support plate.
The number of bushes in this kit is x2, this is the required amount to upgrade both trailing arm support plates.
To fit:
911 1968-1989
911 (930) Turbo 1975-1989
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 911 (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
Diagram ref no 11 Powerflex Part number PFR57-409H
Additional Vehicle Info: 911,912,930
PC3330003 – Powerflex Bush Kit, Rear Anti-Roll Bar, 19mm
Description:
Powerflex rear anti-roll bar bush kit for a 19mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the rear anti-roll bar.
To fit:
911 (996) 1998-2005
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2006-2012
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 10 Powerflex Part number PFR57-510-19
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996
PC3330004 – Powerflex Bush Kit, Rear Anti-Roll Bar, 20mm
Description:
Powerflex rear anti-roll bar bush kit for a 20mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the rear anti-roll bar.
To fit:
911 (996) 1998-2005
Boxster (986) 1997-2004
Boxster (987) 2004-2012
Cayman (987C) 2005-2012
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 10 Powerflex Part number PFR57-510-20
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996
PC3330005 – Powerflex Bush Kit, Rear Anti-Roll Bar, 21mm
Description:
Powerflex rear anti-roll bar bush kit for a 21mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the rear anti-roll bar.
To fit:
911 (996) 1997-2005
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2005-2012
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 10 Powerflex Part number PFR57-510-21
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996
PC3330006H – Powerflex Heritage Rear Shock Upper Bush Kit
Description:
Powerflex Heritage Series rear shock absorber upper mounting bushes.
The number of bushes in this kit is x2; this is the required amount to upgrade both rear shock absorber upper bushes.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
To replace OE bush 91133352100
Additional Vehicle Info: 356,911,912,912E,930
PC3330010 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber.
The BILSTEIN B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-BILSTEIN gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Boxster (986) 2.5-2.7 1997-2004 vehicles without sport suspension M030
Boxster (986) S 3.2 2000-2004 vehicles without sport suspension M030
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 986 Boxster
PC3330011 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber. Not for vehicles with I475 PASM electronic damper control.
The BILSTEIN B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-BILSTEIN gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Boxster (987) 2.7-2.9 2005-2012
Boxster (987) S 3.2-3.4 2005-2012
Cayman (987C) 2.7-2.9 2006-2012
Cayman (987C) S 3.4 2006-2012
Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 987 Boxster,987 Cayman
PC3330012 – Bilstein B6 Rear Shock Absorber with PASM
Description:
Bilstein B6 replacement rear gas shock absorber. Vehicles with I475 PASM electronic damper control suspension only.
The BILSTEIN B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-BILSTEIN gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Boxster (987) 2.7-2.9 2005-2012
Boxster (987) S 3.2-3.4 2005-2012
Cayman (987C) 2.7-2.9 2006-2012
Cayman (987C) S 3.4 2006-2012
Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 987 Boxster,987 Cayman
PC3330013 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber. Direct replacement for the original Boge shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-BILSTEIN gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (964) C2/C4 3.6 12/1988-12/1990
Compatible Vehicles: - 964 (1989,1990,1991)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 964
PC3330014 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber. Direct replacement for the original Boge shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-BILSTEIN gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (964) C2/C4 3.6 01/1991-07/1994
911 (964) Turbo 3.3-3.6 08/1990-07/1994
Compatible Vehicles: - 964 (1991,1992,1993,1994)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 964
PC3330015 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber for the left or right side.
Upgrade for vehicles with standard chassis to replace the original Boge or Monroe shock abosrber.
Replacement for vehicles with sports suspension.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (993) C2/C4/C4S 3.6-3.8 1994-1998
911 (993) Turbo 3.6 1994-1998
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 993
PC3330016 – Bilstein B6 Rear Shock Absorber C2
Description:
Bilstein B6 replacement rear gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (996) C2/C2S 3.4-3.6 1998-2005 vehicles WITHOUT sport suspension M030
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 996
PC3330017 – Bilstein B6 Rear Shock Absorber C4
Description:
Bilstein B6 replacement rear gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (996) C4/C4S 3.4-3.6 1998-2005 vehicles WITHOUT sport suspension M030
911 (996) Turbo 3.6 2001-2005
Compatible Vehicles: - 996 (1999,2000,2001,2002,2003,2004,2005)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 996
PC3330018 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
924 2.0 1976-1985
924 Turbo/Carrera GT 1979-1984
944 06/1981-07/1985 Engine upto M44.04
Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 944 (1982,1983,1984,1985)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 924,944
PC3330019 – Bilstein B6 Rear Shock Absorber
Description:
Bilstein B6 replacement rear gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
924 S 2.5 1986-1988
944 2.5 1985-1991 Engine M44.05 onwards
944 S/S2/Turbo 2.5, 2.7, 3.0 1986-1991
968 1992-1995
Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 924,944,968
PC3330031 – Bilstein B8 Rear Shock Absorber
Description:
- Perfect for lowering suspension kits
- Precision handling and control
- BILSTEIN gas pressure technology
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 993
PC3330041 – Bilstein B6 Sport Rear Shock Absorber
Description:
Bilstein B6 SPORT replacement rear gas shock absorber. Upgrade replacement for Turbo and ''Turbo Look'' models fitted with Bilstein but can be fitted to other models listed below.
The BILSTEIN B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 08/1971-07/1989
911 (930) Turbo 01/1975-07/1989
911 3.2 Turbo Look 1984-1989
911 3.2 1984-1989 with M474 Sporting Shocks option
Compatible Vehicles: - 911 (1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911,930
PC3410001H – Powerflex Heritage Bush Kit, Front Wishbone Inner
Description:
Powerflex Heritage Series bush kit for the front wishbone inner pivot.
The number of bushes in this kit is x4, this is the required amount to upgrade both front wishbone inner pivots.
To fit:
911 1969-1989
911 Turbo 1975-1989
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:Diagram ref no 1, Powerflex Part number PFF57-401H
Additional Vehicle Info: 911,930
PC3410002 – Powerflex Bush Kit, Front or Rear Lower Track Control Arm Outer
Description:
Powerflex bush kit for the front or rear lower track control arm outer bush including metal inserts.
The number of bushes in this kit is x2; this is the required amount to upgrade front or rear track control arm outer bushes depending on the vehicle, see chart below for fitments.
To fit:
911 (996) 1997-2005 Front Track Control arm
911 (996) 1997-2005 Rear Track Control arm
911 (997) 2005-2012 GT2, GT3 & GT3RS Front track control arm
911 (997) 2005-2012 GT2, GT3 & GT3RS Rear track control arm
911 (997) 2005-2012 Inc. Turbo Rear Track control arm
Boxster (986) 1997-2004 Front track control arm
Boxster (986) 1997-2004 Rear track control arm
Boxster (987) 2005-2012 Rear track control arm
Cayman (987C) 2005-12 Rear track control arm
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram ref no 2 - Front applications Diagram ref no 5 - Rear applications Powerflex Part number PFF57-502
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997
PC3410003 – Powerflex Bush Kit, Front Wishbone Inner Front
Description:
Powerflex bush kit for the front wishbone inner front pivot including metal inserts.
The number of bushes in this kit is x2; this is the required amount to upgrade the front inner mounting pivot on the front wishbone.
To fit:
911 (964) 1989-1994
911 (993) 1994-1998
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 2 Powerflex Part number PFF57-102
Additional Vehicle Info: 964,993
PC3410004 – Powerflex Bush Kit, Front or Rear Lower Track Control Arm Inner
Description:
Powerflex bush kit for the lower track control arm inner bush including metal inserts without camber adjustment.
The number of bushes in this kit is x2; this is the required amount to upgrade the two inner bush pivot points on the front or rear track control arm depending on the vehicle, see chart below for fitments.
To fit:
911 (996) 1997-2005 Front track control arm
911 (996) 1997-2005 Rear track control arm
911 (997) 2005-2012 Inc. Turbo Rear track control arm
911 (997) 2005-2012 GT2, GT3 & GT3RS Front track control arm
911 (997) 2005-2012 GT2, GT3 & GT3RS Rear track control arm
Boxster (986) 1997-2004 Front track control arm
Boxster (986) 1997-2004 Rear track control arm
Boxster (987) 2005-2012 Rear track control arm
Cayman (987C) 2005-2012 Rear track control arm
POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, Greater cost-effectiveness.
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram ref no 3 - Front applications, Diagram ref no 6 - Rear applications, Powerflex Part number PFF57-503
Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997
PC3410005 – Powerflex Bush Kit, Front Inner Lower Track Control Arm
Description:
Powerflex camber adjustable front lower track control arm inner bush kit including metal inserts and camber adjustment plates.
The number of bushes in this kit is x2; this is the required amount to upgrade both inner bush pivot points on the front lower track control arms.
To fit:
911 (996) 1997-2005 Front track control arm
911 (997) inc Turbo, GT2, GT3 & GT3 RS 2005-2012
Boxster (987) 2005-2012
Cayman (987C) 2005-2012
Benefits of replacing your vehicle's OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram ref no 3 Powerflex Part number PFF57-801
Additional Vehicle Info: 987 Boxster,987 Cayman,996,997
PC3410006 – Powerflex Bush Kit, Front Lower Track Control Arm Outer Bush
Description:
Powerflex front lower track control arm outer bush kit including adjustable caster sleeves and adjustment tool.
The number of bushes in this kit is x2; this is the required amount to upgrade both front track control arm outer bushes.
To fit:
911 (997) inc Turbo 2005-2012
Boxster (987) 2005-2012
Cayman (987C) 2005-2012
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:Diagram reference 2 Powerflex Part number PFF57-802
Additional Vehicle Info: 987 Boxster,987 Cayman,997
PC3410007H – Powerflex Heritage Bush Kit, Front Top Strut Mounts
Description:
Powerflex Heritage Series front top strut mount bush kit including sleeves.
The number of bushes in this kit is x2; this is the required amount to upgrade both front top mount bushes.
To fit:
911 1970-1989
911 (930) Turbo 1975-1989
914 1970-1976 all models
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 911 (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 914 (1970,1971,1972,1973,1974,1975,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:Powerflex Part number PFF57-406H
Additional Vehicle Info: 911,914,930
PC3410010 – Bilstein B6 Standard Front Strut Insert for Boge Strut
Description:
Bilstein B6 standard replacement front gas shock absorber strut insert for vehicles with a BOGE strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 08/1985-07/1989 Vehicles with Boge strut only
Compatible Vehicles: - 911 (1986,1987,1988,1989)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911
PC3410011 – Bilstein B6 Standard Front Strut Insert for Boge Strut
Description:
Bilstein B6 STANDARD replacement front gas shock absorber strut insert for vehicles with a BOGE strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 08/1968-07/1985 Vehicles with Boge strut only
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911
PC3410012 – Bilstein B6 Standard Front Strut Insert
Description:
Bilstein B6 standard replacement front gas shock absorber strut insert for vehicles with a BILSTEIN strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 08/1972-1989 Vehicles with Bilstein strut only
911 (930) Turbo 1975-1989 Vehicles with Bilstein strut only
Compatible Vehicles: - 911 (1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911,930
PC3410013 – Bilstein B6 Sport Front Strut Insert
Description:
Bilstein B6 sport replacement front gas shock absorber strut insert for vehicles with a Bilstein strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 08/1972-1989 Vehicles with Bilstein strut only
911 (930) Turbo 1975-1989 Vehicles with Bilstein strut only
Compatible Vehicles: - 911 (1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911,930
PC3410014 – Bilstein B6 Sport Front Strut Insert for Boge Strut
Description:
Bilstein B6 SPORT replacement front gas shock absorber strut insert for vehicles with a BOGE strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 08/1968-07/1985
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911
PC3410015 – Bilstein B6 Sport Front Shock Absorber Strut, Left
Description:
Bilstein B6 SPORT replacement complete front gas shock absorber strut, left.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
To fit:
911 F models with Bilstein shocks and S Calipers
911 G models 1974-1989
911 (930) Turbo 3.3 1978-1989
Compatible Vehicles: - 911 (1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911,930
PC3410016 – Bilstein B6 Sport Front Shock Absorber Strut, Right
Description:
Bilstein B6 SPORT replacement complete front gas shock absorber strut, right.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
To fit:
911 F models with Bilstein shocks and S Calipers
911 G models 1974-1989
911 (930) Turbo 3.3 1978-1989
Compatible Vehicles: - 911 (1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 911,930
PC3410019 – nan
PC3430001 – Powerflex Bush Kit, Front Suspension Drop Links
Description:
Powerflex bush kit for the front suspension drop links complete with metal inserts.
The number of bushes in this kit is x4, this is the required amount to upgrade both drop links.
To fit:
911 1965-1973
912 1965-1969
911 (930) Turbo 1975-1977
914 1970-1976
POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, Greater cost-effectiveness.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976) - 930 (1975,1976,1977)
Notes:Diagram ref no 3, Powerflex Part number PFF57-402, To replace OE bush 90134378300
Additional Vehicle Info: 911,912,914,930
PC3430002 – Powerflex Bush Kit, Front Anti-Roll Bar, 16mm
Description:
Powerflex front anti-roll bar bush kit for a 16mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the front anti-roll bar.
To fit:
911 1974-1977
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 911 (1974,1975,1976,1977)
Notes:Diagram ref no 3 Powerflex Part number PFF57-403-16 Replaces OE bush 91134379202
Additional Vehicle Info: 911
PC3430003 – Powerflex Bush Kit, Front Anti-Roll Bar, 20mm
Description:
Powerflex front anti-roll bar bush kit for a 20mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the front anti-roll bar.
To fit:
911 1974-1985
911 (930) Turbo 1975-1984
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984)
Notes:Diagram ref no 3 Powerflex Part number PFF57-403-20 Replace OE bush 91134379203
Additional Vehicle Info: 911,930
PC3430004 – Powerflex Bush Kit, Front Anti-Roll Bar, 22mm
Description:
Powerflex front anti-roll bar bush kit for a 22mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the front anti-roll bar.
To fit:
911 1986-1989
911 (930) Turbo 1985-1989
POWERFLEX Road Series bushes improve your cars’ road holding and chassis performance by controlling the amount of unwanted flex in the suspension. This means the suspension is doing what it is supposed to. It means your tyres have greater contact with the road at all times, therefore, improving safety and performance. Correctly formulated polyurethane is as good if not better at noise, vibration and harshness suppression when compared to worn rubber. Powerflex Road bushes offer Prolonged tyre life, Improved performance, Increase safety, Greater cost-effectiveness.
Compatible Vehicles: - 911 (1986,1987,1988,1989) - 930 (1985,1986,1987,1988,1989)
Notes:Diagram ref no 3, Powerflex Part number PFF57-403-22, To replace OE bush 91134388100
Additional Vehicle Info: 911,930
PC3430004H – Powerflex Heritage Bush Kit, Front Anti-Roll Bar, 22mm
Description:
Powerflex Heritage Series front anti roll-bar bush kit for a 22mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the front anti-roll bar.
To fit:
911 1986-1989
911 (930) Turbo 1985-1989
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 911 (1985,1986,1987,1988,1989) - 930 (1985,1986,1987,1988,1989)
Notes:Diagram ref no 3, Powerflex Part number PFF57-403-22H, To replace OE bush 91134388100
Additional Vehicle Info: 911,930
PC3430005 – Powerflex Bush Kit, Front Suspension Drop Links
Description:
Powerflex bush kit for the front anti-roll bar drop links (wishbone end) complete with washers, and nuts.
The number of bushes in this kit is x4, this is the required amount to upgrade the wishbone end of both front anti-roll bar drop links.
To fit:
944 inc S2 & Turbo 1985-1991
968 1992-1995
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)
Notes:Diagram ref no 5 Powerflex Part number PFF57-210 To replace OE bush 95134379501
Additional Vehicle Info: 944,968
PC3430007 – Powerflex Bush Kit, Front Anti-Roll Bar, 22.5mm
Description:
Powerflex front anti-roll bar bush kit for a 22.5mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (996) 1997-2005
Boxster (986) 1997-2004
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 1 Powerflex Part number PFF57-501-22.5
Additional Vehicle Info: 986 Boxster,996
PC3430008 – Powerflex Bush Kit, Front Anti-Roll Bar, 23mm
Description:
Powerflex front anti-roll bar bush kit for a 23mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (996) 1997-2005
Boxster (986) 1997-2004
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 1 Powerflex Part number PFF57-501-23
Additional Vehicle Info: 986 Boxster,996
PC3430009 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links, 16mm
Description:
Powerflex bush kit for the front anti-roll bar drop links (anti-roll bar end) for a 16mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the anti-roll bar end of both front anti-roll bar drop links.
To fit:
944 1985-1991
944 S2 & Turbo 1985-1991
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991)
Notes:Diagram ref no 4 Powerflex Part number PFF57-205-16
Additional Vehicle Info: 944
PC3430010 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links, 20mm
Description:
Powerflex bush kit for the front anti-roll bar drop links (anti-roll bar end) for a 20mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the anti-roll bar end of both front anti-roll bar drop links.
To fit:
924 1976-1977
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 924 (1976,1977)
Notes:Diagram ref no 4 Powerflex Part number PFF57-205-20 To fit drop link OE part number 477411057F
Additional Vehicle Info: 924
PC3430011 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links, 21mm
Description:
Powerflex bush kit for the front anti-roll bar drop links (anti-roll bar end) for a 21mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the anti-roll bar end of both front anti-roll bar drop links.
To fit:
924 2.0 1980-1985 upto chassis number 92CN4 02197 (check size)
924 Turbo 1980-1984 upto chassis number 93CN1 00305 (check size)
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 924 (1980,1981,1982,1983,1984,1985)
Notes:Diagram ref no 4 Powerflex Part number PFF57-205-21 To fit drop link OE part number 477411057N
Additional Vehicle Info: 924
PC3430012 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links, 22mm
Description:
Powerflex bush kit for the front anti-roll bar drop links (anti-roll bar end) for a 22mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the anti-roll bar end of both front anti-roll bar drop links.
To fit:
924 1978
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 924 (1978)
Notes:Diagram ref no 4 Powerflex Part number PFF57-205-22 To fit drop link OE part number 477411057G
Additional Vehicle Info: 924
PC3430013 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links, 23mm
Description:
Powerflex bush kit for the front anti-roll bar drop links (anti-roll bar end) for a 23mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the anti-roll bar end of both front anti-roll bar drop links.
To fit:
924 2.0 1979-1985 upto chassis number 92CN4 02197 (check size)
924 Turbo 1979-1984 upto chassis number 93CN1 00305 (check size)
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 924 (1979,1980,1981,1982,1983,1984,1985)
Notes:Diagram ref no 4 Powerflex Part number PFF57-205-23 To fit drop link OE part number 477411057P
Additional Vehicle Info: 924
PC3430014 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links, 25.5mm and 26.8mm
Description:
Powerflex bush kit for the front anti-roll bar drop links (anti-roll bar end) for a 25.5mm or 26.8mm diameter bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the anti-roll bar end of both front anti-roll bar drop links.
To fit:
944 inc S and Turbo 1985-1991
968 1992-1995
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)
Notes:Diagram ref no 4 Powerflex Part number PFF57-206
Additional Vehicle Info: 944,968
PC3430015 – Powerflex Bush Kit, Front Anti-Roll Bar, 23.5mm
Description:
Powerflex front anti-roll bar bush kit for a 23.5mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (996) 1998-2005
Boxster (986) 1997-2004
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:Diagram ref no 1 Powerflex Part number PFF57-501-23.5
Additional Vehicle Info: 986 Boxster,996
PC3430016 – Powerflex Bush Kit, Front Anti-Roll Bar, 19mm
Description:
Powerflex front anti-roll bar bush kit for a 19mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (964) 1989-1994
911 (993) 1994-1998
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601
Additional Vehicle Info: 964,993
PC3430017 – Powerflex Bush Kit, Front Anti-Roll Bar, 20mm
Description:
Powerflex front anti-roll bar bush kit for a 20mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (964) C2/C4 1989-1994
911 (993) Turbo Look C4S 1994-1998
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601-20 Replaces OE bush 96434379220
Additional Vehicle Info: 964,993
PC3430018 – Powerflex Bush Kit, Front Anti-Roll Bar, 21mm
Description:
Powerflex front anti-roll bar bush kit for a 21mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (964) Turbo Look 1989-1994
911 (964) Turbo 1991-1994
911 (993) C2/C4 1994-1998
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601-21 Replaces OE bush 96434379221
Additional Vehicle Info: 964,993
PC3430019 – Powerflex Bush Kit, Front Anti-Roll Bar, 22mm
Description:
Powerflex front anti-roll bar bush kit for a 22mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (964) C2/C4 1991-1994 with M030 Sport-type chassis only
911 (993) C2/C4 1994-1998 with M030 Sport-type chassis only
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601-22 Replaces OE bush 96434379222
Additional Vehicle Info: 964,993
PC3430020 – Powerflex Bush Kit, Front Anti-Roll Bar, 23mm
Description:
Powerflex front anti-roll bar bush kit for a 23mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (993) Carrera RS 1995-1996
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 993 (1995,1996)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601-23 Replaces OE bush 96434379206
Additional Vehicle Info: 993
PC3430021 – Powerflex Bush Kit, Front Anti-Roll Bar, 24mm
Description:
Powerflex front anti-roll bar bush kit for a 24mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (964) Carrera RS 1992
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1992)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601-24 Replaces OE bush 96434379207
Additional Vehicle Info: 964
PC3430022 – Powerflex Bush Kit, Front Anti-Roll Bar, 27mm
Description:
Powerflex front anti-roll bar bush kit for a 27mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D-bushes on the front anti-roll bar.
To fit:
911 (964) 1989-1994
Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Notes:Diagram ref no 3 Powerflex Part number PFF57-601-27
Additional Vehicle Info: 964
PC3430030 – Bilstein B6 Front Shock Absorber
Description:
Bilstein B6 replacement front gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Boxster (986) 2.5-2.7 1997-2004 vehicles without sport suspension M030
Boxster (986) S 3.2 2000-2004 vehicles without sport suspension M030
Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 986 Boxster
PC3430031 – Bilstein B6 Front Shock Absorber
Description:
Bilstein B6 replacement front gas shock absorber. Not for vehicles with I475 PASM electronic damper control.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Boxster (987) 2.7-2.9 2005-2012
Boxster (987) S 3.2-3.4 2005-2012
Cayman (987C) 2.7-2.9 2006-2012
Cayman (987C) S 3.4 2006-2012
Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 987 Boxster,987 Cayman
PC3430032 – Bilstein B6 Front Shock Absorber with PASM
Description:
Bilstein B6 replacement front gas shock absorber. Vehicles with I475 PASM electronic damper control suspension only.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by BILSTEIN for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Boxster (987) 2.7-2.9 2005-2012
Boxster (987) S 3.2-3.4 2005-2012
Cayman (987C) 2.7-2.9 2006-2012
Cayman (987C) S 3.4 2006-2012
Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 987 Boxster,987 Cayman
PC3430033 – Bilstein B6 Front Shock Absorber Strut, Left
Description:
Bilstein B6 replacement front gas shock absorber strut for the left side. Direct replacement for the original Boge strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 1 required per vehicle.
To fit:
911 (964) 3.3-3.6 1989-1994 all models inc Turbo
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 964
PC3430034 – Bilstein B6 Front Shock Absorber Strut, Right
Description:
Bilstein B6 replacement front gas shock absorber strut for the right side. Direct replacement for the original Boge strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 1 required per vehicle.
To fit:
911 (964) 3.3-3.6 1989-1994 all models inc Turbo
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 964
PC3430035 – Bilstein B6 Front Shock Absorber Strut, Left
Description:
Bilstein B6 replacement front gas shock absorber strut for the left side.
Upgrade for vehicles with standard chassis to replace the original Boge or Monroe strut.
Replacement for vehicles with sports suspension.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 1 required per vehicle.
To fit:
911 (993) C2/C4/C4S 3.6-3.8 1994-1998
911 (993) Turbo 3.6 1994-1998
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 993
PC3430036 – Bilstein B6 Front Shock Absorber Strut, Right
Description:
Bilstein B6 replacement front gas shock absorber strut for the right side.
Upgrade for vehicles with standard chassis to replace the original Boge or Monroe strut.
Replacement for vehicles with sports suspension.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-BILSTEIN mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 1 required per vehicle.
To fit:
911 (993) C2/C4/C4S 3.6-3.8 1994-1998
911 (993) Turbo 3.6 1994-1998
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 993
PC3430037 – Bilstein B6 Front Shock Absorber C2
Description:
Bilstein B6 replacement front gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (996) C2/C2S 3.4-3.6 1998-2005 vehicles without sport suspension M030
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 996
PC3430038 – Bilstein B6 Front Shock Absorber C4
Description:
Bilstein B6 replacement front gas shock absorber.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
911 (996) C4/C4S 3.4-3.6 1998-2005 vehicles with and without sport suspension M030
911 (996) Turbo 3.6 2001-2005
Compatible Vehicles: - 996 (1999,2000,2001,2002,2003,2004,2005)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 996
PC3430039 – Bilstein B6 Front Strut Insert
Description:
Bilstein B6 replacement front gas shock absorber strut insert for vehicles with Boge strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
Porsche: with BOGE strut only
924 2.0 1976-1986
924 Turbo/Carrera GT 2.0 1979-1986
924S 2.5 1986-1988
944 inc S/S2 2.5, 2.7, 3.0 1985-1991 ** SEE NOTE BELOW
944 Turbo 2.5 1985-1989 ** SEE NOTE BELOW
Volkwagen:
Beetle 1303 1974-1979 from chassis 134 2000 001>>
IMPORTANT NOTE: This insert is compatible with all Porsche 944 models, however, in late 1986 Porsche updated the design of the front strut to make them non-rebuildable. As a result, this insert will not fit models from late 1986 onward without modification and cutting of the strut.
Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1985,1986,1987,1988,1989,1990,1991)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 924,944,Beetle,Beetle Cabriolet
PC3430040 – Bilstein B6 Front Strut Insert
Description:
Bilstein B6 replacement front gas shock absorber strut insert for vehicles with Boge/Fichtel & Sachs strut.
The Bilstein B6 is the ideal gas-pressure shock absorber for those who refuse to compromise between performance and comfort.
-Optimum adhesion and enhanced lane change stability in both day-to-day and extreme situations.
-Marked improvement in safety and performance without additional spring changes (standard springs can be used).
-Bilstein gas pressure technology.
-Bilstein mono-tube/Upside-Down technology.
-Road and track tested by Bilstein for fine-tuning.
Sold each, 2 required per vehicle.
To fit:
944 S2 3.0 1990-1991 Vehicles with M031 Fichtel & Sachs sports chassis
944 S2 3.0 1991 M757 Special model
944 Turbo 2.5 1990-1991
968 1992-1995
IMPORTANT NOTE: In late 1986 Porsche updated the design of the front strut to make them non-rebuildable. As a result, this insert will not fit models from late 1986 onward without modification and cutting of the strut.
Compatible Vehicles: - 944 (1990,1991) - 968 (1992,1993,1994,1995)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 944,968
PC3430041 – Bilstein B8 Front Shock Absorber Strut, Left
Description:
- Perfect for lowering suspension kits
- Precision handling and control
- BILSTEIN gas pressure technology
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 993
PC3430042 – Bilstein B8 Front Shock Absorber Strut, Right
Description:
- Perfect for lowering suspension kits
- Precision handling and control
- BILSTEIN gas pressure technology
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Notes:
It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.
Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.
Where OE components are unsuitable, Bilstein will supply appropriate alternatives.
Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.
Additional Vehicle Info: 993
PC3470001 – Powerflex Steering Column Bearing Support Bush
Description:
Powerflex steering column bearing support bush.
This bush replaces OE part number 90134722303.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:Diagram ref no 5
Additional Vehicle Info: 911,912,914,930
PC3470001H – Powerflex Heritage Steering Column Bearing Support Bush
Description:
Powerflex Heritage Series steering column bearing support bush.
This bush replaces OE part number 90134722303.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,914,930
PC3470002 – MOMO Steering Wheel Boss Kit
Description:
Collapsible MOMO steering wheel boss kit.
To fit:
911 1965-07/1973
914-6 1970-07/1971
912 1965-1969
MOMO is the company that invented and market-launched the first collapsible steering wheel hub that we use today.
Compared to a rigid hub, a collapsible hub is able to absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of a collision.
Kit Includes fixing screws, allen key, and horn contact retaining ring.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971)
Notes:
6 Bolt
Additional Vehicle Info: 911,912,914
PC3470003 – MOMO Steering Wheel Boss Kit
Description:
Collapsible MOMO steering wheel boss kit.
To fit:
911 08/1973-1989
912E 1976
928 09/1979-07/1988
MOMO is the company that invented and market-launched the first collapsible steering wheel hub that we use today.
Compared to a rigid hub, a collapsible hub is able to absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of a collision.
Kit Includes fixing screws, allen key, and horn contact retaining ring.
Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1976) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Notes:
6 Bolt
Splines 40
Additional Vehicle Info: 911,912,928,930
PC3470005 – MOMO Steering Wheel Boss Kit
Description:
MOMO steering wheel boss kit.
To fit:
914 4 Cylinder 08/1971-1976
914-6 08/1971-07/1972
Kit Includes fixing screws, allen key, and horn contact retaining ring.
Compatible Vehicles: - 914 (1972,1973,1974,1975,1976)
Notes:
6 Bolt
Additional Vehicle Info: 914
PC3470007 – MOMO Steering Wheel Boss Kit
Description:
Collapsible MOMO steering wheel boss kit.
To fit:
944 1985-1991 (Rounded dash)
968 1992-1995 models without airbag
911 (964) 1989-1994
MOMO is the company that invented and market-launched the first collapsible steering wheel hub that we use today.
Compared to a rigid hub, a collapsible hub is able to absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of a collision.
Kit Includes fixing screws, allen key, and horn contact retaining ring.
Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995)
Notes:
6 Bolt
Additional Vehicle Info: 944,964,968,993
PC3510001 – EMPI Front Disc Brake Kit
Description:
- Complete kit with all necessary components
- Designed for stock drum brake spindles
- Fits Porsche 356 A and 356 B models
Compatible Vehicles: - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: 356
PC3510010 – CSP Rear Disc Brake Kit, 5x205 Solid Discs
Description:
- Complete kit with solid discs
- Direct bolt-on installation, no track increase
- High-quality German engineering, CNC-machined
Compatible Vehicles: - 356 (1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: 356
PC3510011 – CSP Rear Disc Brake Kit, 5x205 Cross Drilled Solid Discs
Description:
- Complete kit with cross drilled solid discs
- Direct bolt-on installation, no track increase
- High-quality German engineering, CNC-machined
Compatible Vehicles: - 356 (1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: 356
PC3510012 – CSP Front Disc Brake Kit, 5x205 Solid Discs
Description:
- Complete kit with solid discs
- CNC-machined adapters for easy installation
- TÜV certified for assured quality and safety
Compatible Vehicles: - 356 (1956,1957,1958,1959)
Additional Vehicle Info: 356
PC3510013 – CSP Front Disc Brake Kit, 5x205 Solid Discs
Description:
- Complete kit with solid discs
- CNC-machined adapters for easy installation
- TÜV certified for assured quality and safety
Compatible Vehicles: - 356 (1960,1961,1962,1963)
Additional Vehicle Info: 356
PC3510014 – CSP Front Disc Brake Kit, 5x205 Vented Discs
Description:
- Complete kit with vented discs
- CNC-machined adapters for easy installation
- TÜV certified for assured quality and safety
Compatible Vehicles: - 356 (1956,1957,1958,1959)
Additional Vehicle Info: 356
PC3510015 – CSP Front Disc Brake Kit, 5x205 Vented Discs
Description:
- Complete kit with vented discs
- CNC-machined adapters for easy installation
- TÜV certified for assured quality and safety
Compatible Vehicles: - 356 (1960,1961,1962,1963)
Additional Vehicle Info: 356
PC3510132 – CSP Aluminium Drum Cover, 132mm
Description:
- Achieve classic styling on modern brakes
- Fits Porsche and VW 15" steel rims
- Made in Germany, CNC-machined
Compatible Vehicles: - Beetle (1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - 356 (1956,1957,1958,1959,1960,1961,1962,1963) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: 356,Beetle,Karmann Ghia,T2 Split,Type 3
PC3510136 – CSP Aluminium Drum Cover, 136mm
Description:
- Achieve classic styling on modern brakes
- Fits Porsche and VW 15" steel rims
- Made in Germany, CNC-machined
Compatible Vehicles: - T2 Bay (1968,1969,1970) - 356 (1956,1957,1958,1959,1960,1961,1962,1963) - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: 356,T2 Bay,T2 Split
PC3510140 – CSP Aluminium Drum Cover, 140mm
Description:
- Achieve classic styling on modern brakes
- Fits Porsche and VW 15" steel rims
- Made in Germany, CNC-machined
Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - 356 (1956,1957,1958,1959,1960,1961,1962,1963) - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: 356,Beetle,Karmann Ghia,T2 Bay,T2 Split
PC3550001 – Goodridge Stainless Steel Braided Brake Line Kit
Description:
Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.
To fit:
911 (964) C2/C4/RS 1989-1994
Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.
Goodridge brake hose kits are TÜV approved.
Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 964
PC3550002 – Goodridge Stainless Steel Braided Brake Line Kit
Description:
Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.
To fit:
924 S 2.5 1986-1988
944 1982-1986
Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.
Goodridge brake hose kits are TÜV approved.
Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1982,1983,1984,1985,1986)
Additional Vehicle Info: 924,944
PC3550003 – Goodridge Stainless Steel Braided Brake Line Kit
Description:
Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.
To fit:
944 1987-1991 Not Turbo models
Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.
Goodridge brake hose kits are TÜV approved.
Compatible Vehicles: - 944 (1987,1988,1989,1990,1991)
Additional Vehicle Info: 944
PC3550004 – Goodridge Stainless Steel Braided Brake Line Kit
Description:
Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.
To fit:
911 (993) 1994-1998
Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.
Goodridge brake hose kits are TÜV approved.
Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 993
PC3550005 – Goodridge Stainless Steel Braided Brake Line Kit
Description:
Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.
To fit:
911 (996) 1998-2005
Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.
Goodridge brake hose kits are TÜV approved.
Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: 996
PC3550006 – Goodridge Stainless Steel Braided Brake Line Kit
Description:
Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.
To fit:
924 Turbo 2.0 1979-1984
Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.
Goodridge brake hose kits are TÜV approved.
Compatible Vehicles: - 924 (1979,1980,1981,1982,1983,1984)
Additional Vehicle Info: 924
Replies have been locked on this page!