Fitment #208

PC3550007 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
924 2.0 1976-1985 Not Turbo models

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)

Additional Vehicle Info: 924

---

PC3550009 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
928 1982-1983 up to chassis number >>DS861385

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 928 (1982,1983)

Additional Vehicle Info: 928

---

PC3550012 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
968 1992-1995 Not with M030 Sport-type chassis (Clubsport)

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 968 (1992,1993,1994,1995)

Additional Vehicle Info: 968

---

PC3550013 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
968 Club Sport 1992-1995 with M030 Sport-type chassis

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 968 (1992,1993,1994,1995)

Additional Vehicle Info: 968

---

PC3550014 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
914/4 1970-1976

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

---

PC3550015 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 1974-1989

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

---

PC3550016 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 (930) Turbo 3.0-3.3 1975-1989

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 930

---

PC3550017 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 1965-1968
912 1965-1968

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)

Additional Vehicle Info: 911,912

---

PC3550018 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 1969-1973
912 1969

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)

Additional Vehicle Info: 911,912

---

PC3550019 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 (996) GT3 1999-2005

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 996 (1999,2000,2001,2002,2003,2004,2005)

Additional Vehicle Info: 996

---

PC3550020 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 (964) 1990-1994 Turbo models

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 964 (1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

---

PC3550021 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
911 (997) including GT3 2005-2012

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 997

---

PC3550022 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
Boxster (986) inc S 1997-2004

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

---

PC3550023 – Goodridge Stainless Steel Braided Brake Line Kit

Description:

Goodridge stainless steel braided brake hose kit. This is a 4 line kit including the front and rear brake lines.

To fit:
Boxster (987) inc S 2005-2012
Cayman (987C) inc S 2006-2012

Goodridge kits feature the finest quality hose, consisting of a PTFE inner with a stainless overbraid covered in a CLEAR outer coating. This eliminates the spongy pedal feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded, but offer brilliant good looks that improve the appearance of any installation and reduce stopping distance. Standard automotive flexible brake hoses are manufactured from synthetic rubber and are reinforced with multiple layers of fabric braid. Under pressure they can expand considerably, having an alarming effect on the efficiency of the braking system.

Goodridge brake hose kits are TÜV approved.

Compatible Vehicles: - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 987 Boxster,987 Cayman

---

PC3550030 – Brake Cooling Ducts

Description:

Brake cooling ducts to replace the spot/fog lights in the front bumper. These ducts are made from high quality ABS plastic and can aid brake cooling.

Supplied as a pair.

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

---

PC3550031 – Brake Cooling Ducts

Description:

Brake cooling ducts to replace the spot/fog lights in the front bumper. These ducts are made from high quality ABS plastic and can aid brake cooling.

Supplied as a pair.

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

---

PC3550040 – CSP Dual Circuit Master Cylinder Kit, 20.64mm

Description:

This master cylinder for Porsche 356 with an internal 20.64 mm bore is used along high performance brake systems. It is recommended on all Porsche 356 with a CSP Products vented front disc brake system and/or with any rear disc brake system. It can only be used on LHD cars.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)

Additional Vehicle Info: 356

---

PC3610001 – Hubcentric Wheel Spacer Shim 7mm

Description:

Wheel spacer aluminium shim, 5x130 stud pattern, 7mm width with a 71.6mm centre bore.

Sold each, 2 required per axle.

You will require longer wheel bolts to fit these, or longer studs if your model uses studs and nuts.

To fit:
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2006-2012
944 1982-1991
924S 1986-1988
968 1992-1995
928 1978-1995
911 1965-1989
912 1965-1969
911 (930) 1975-1989
911 (964) 1989-1994
911 (993) 1994-1998
911 (996) 1998-2005
911 (997) 2005-2012

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 924 (1986,1987,1988) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995) - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 993 (1994,1995,1996,1997,1998) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 911,912,924,928,930,944,964,968,986 Boxster,987 Boxster,987 Cayman,993,996,997

---

PC3610001/KIT – Hubcentric Wheel Spacers, 7mm, PAIR with bolts

Description:

• 7mm hubcentric shims with longer bolts included
• Compatible with OE wheels using radius bolts
• Improves handling and enhances vehicle stance

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610002 – Hubcentric Wheel Spacer 15mm

Description:

Hubcentric wheel spacer, 5x130 stud pattern, 15mm width with a 71.6mm centre bore.

Sold each, 2 required per axle.

You will require longer wheel bolts to fit these.

To fit:
911 (996) 1998-2005
911 (997) 2005-2012
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2006-2012

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610002/KIT – Hubcentric Wheel Spacers, 15mm, PAIR with bolts

Description:

• 7mm hubcentric shims with longer bolts included
• Compatible with OE wheels using radius bolts
• Improves handling and enhances vehicle stance

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610003 – Hubcentric Wheel Spacer 20mm Bolt On

Description:

Bolt on hubcentric wheel spacer, 5x130 stud pattern, 20mm width with a 71.6mm centre bore.

Sold each, 2 required per axle.

With a bolt on spacer you will not need longer bolts, They bolt onto the wheel hub then you use your original wheel bolts to bolt the wheel back onto the spacer. Supplied with 5 bolts to bolt the spacer to the hub.

To fit:
911 (996) 1998-2005
911 (997) 2005-2012
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2006-2012

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610003/PR – Hubcentric Wheel Spacers, Bolt On, 20mm, PAIR

Description:

• Bolt-on design – no need for longer bolts
• Supplied as a pair with bolts included
• Improves stability and enhances vehicle stance

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610004 – Hubcentric Wheel Spacer 25mm Bolt on

Description:

Bolt on hubcentric wheel spacer, 5x130 stud pattern, 25mm width with a 71.6mm centre bore.

Sold each, 2 required per axle.

With a bolt on spacer you will not need longer bolts, They bolt onto the wheel hub then you use your original wheel bolts to bolt the wheel back onto the spacer. Supplied with 5  bolts to bolt the spacer to the hub.

To fit:
911 (996) 1998-2005
911 (997) 2005-2012
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2006-2012

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610004/PR – Hubcentric Wheel Spacers, Bolt On, 25mm, PAIR

Description:

• Bolt-on design – no need for longer bolts
• Supplied as a pair with bolts included
• Improves stability and enhances vehicle stance

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610005 – Hubcentric Wheel Spacer 30mm Bolt on

Description:

Bolt on wheel spacers, 5x130 stud pattern, 30mm width with a 71.6mm centre bore.

Sold each, 2 required per axle.

With a bolt on spacer you will not need longer bolts, They bolt onto the wheel hub then you use your original wheel bolts to bolt the wheel back onto the spacer. Supplied with 20x bolts to bolt the spacer to the hub.

To fit:
911 (996) 1998-2005
911 (997) 2005-2012
Boxster (986) 1997-2004
Boxster (987) 2005-2012
Cayman (987C) 2006-2012

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3610005/PR – Hubcentric Wheel Spacers, Bolt On, 30mm, PAIR

Description:

• Bolt-on design – no need for longer bolts
• Supplied as a pair with bolts included
• Improves stability and enhances vehicle stance

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Additional Vehicle Info: 986 Boxster,987 Boxster,987 Cayman,996,997

---

PC3750001 – Powerflex Bush Kit, Gearbox or Engine Mount

Description:

Powerflex engine / gearbox mount bush kit complete with metal inserts.
The number of bushes in this kit is x2, this is the required amount to upgrade both engine / gearbox mounts.

To fit:
911 1965-1989
911 (930) Turbo 1975-1989

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Notes:Diagram ref no 15 Powerflex Part number PFR57-415

Additional Vehicle Info: 911,930

---

PC3750001H – Powerflex Heritage Bush Kit, Gearbox or Engine Mount

Description:

Powerflex engine / gearbox mount bush kit complete with metal inserts.

The number of bushes in this kit is x2, this is the required amount to upgrade both engine / gearbox mounts.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Notes:

Diagram ref no 15

Additional Vehicle Info: 911,930

---

PC3750002 – Powerflex Bush Kit, Gearbox Front Mount

Description:

Powerflex front gearbox mount bush kit complete with metal inserts and washers.
The number of bushes in this kit is x1, this is the required amount to upgrade the original one piece unit.

This bush replaces OE part number 96437505502.

To fit:
911 (964) C2 1990-1994 Manual transmission type G50.03/G50.04/G50.05
911 (964) Turbo 1991-1992 Manual transmission type G50.52
911 (964) C2 1992-1994 Tiptronic transmission type A50.02/A50.03
911 (993) C2 1994-1998 Manual transmission type G50.20/G51.21
911 (993) C2 1994-1998 Tiptronic transmission type A50.04/A50.05

Compatible Vehicles: - 964 (1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Notes:Diagram ref no 22 Powerflex Part number PFR57-120

Additional Vehicle Info: 964,993

---

PC3750003 – Powerflex Bush Kit, Gearbox Front Mount

Description:

Powerflex front gearbox mount bush insert kit.

For vehicles with a single bush (OE part number 99637505505) in the end casing use this kit PFR57-530, including all 3.4 models, 3.6 & 3.8 Manual models except for Turbo GT2 & GT3 models.
For vehicles with the twin mounting bracket (OE part number 99737503303) at the end of the gearbox, fitted to all 996 & 997 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3 use PFR57-531 (PC3470004).

The number of bushes in this kit is x2, this is the required amount to upgrade the original mount bushes.

To fit:
911 (996) 1998-2005 see above fitment details
911 (997) 2005-2012 see above fitment details

Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012)

Notes:Diagram ref no 30 Powerflex Part number PFR57-530

Additional Vehicle Info: 996,997

---

PC3750004 – Powerflex Bush Kit, Gearbox Front Mount

Description:

Powerflex front gearbox mount bush insert kit.

For vehicles with the twin mounting bracket (OE part number 99737503303) at the end of the gearbox use this kit PFR57-531, fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3.
For vehicles with a single bush (OE part number 99637505505) in the end casing use PFR57-530 (PC3470003), including all 3.4 models, 3.6 & 3.8 Manual models except for Turbo GT2 & GT3 models.

The number of bushes in this kit is x2, this is the required amount to upgrade the original mount bushes.

To fit:
911 (996) 1998-2005 see above fitment details
911 (997) GT2, GT3 & GT3RS 2007-2012
911 (997) Turbo 2007-2012

Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2007,2008,2009,2010,2011,2012)

Notes:Diagram ref no 30 Powerflex Part number PFR57-531

Additional Vehicle Info: 996,997

---

PC4070001 – Powerflex Bush Kit, Front Wishbone Inner Front or Rear

Description:

Powerflex bush kit for the front wishbone inner front or rear pivot (depending on application, see below) including metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade either front or rear inner mounting pivots on the front wishbone depending on the vehicle, see table below.

To fit:
911 (964) 1989-1994 Front wishbone inner rear bush
911 (993) 1994-1998 Front wishbone inner rear bush
944 1985 Front wishbone inner front bush (cast alloy wishbone only)
944 inc S, S2, Turbo 1986-1991 Front wishbone inner front bush
968 1992-1995 Front wishbone inner front bush

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995) - 993 (1994,1995,1996,1997,1998)

Notes:964 Diagram ref no 1, 993 Diagram ref no 1, 944, 968 Diagram ref no 1, Powerflex Part number PFF57-101

Additional Vehicle Info: 944,964,968,993

---

PC4070002 – Powerflex Bush Kit, Front Wishbone Inner Rear

Description:

Powerflex bush kit for the front wishbone inner rear pivot including metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade the front inner mounting pivot on the front wishbone.

To fit:
944 inc S, S2 & Turbo 1985-1991 Front wishbone inner rear pivot
968 1992-1995 Front wishbone inner rear pivot

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 2 Powerflex Part number PFF57-203

Additional Vehicle Info: 944,968

---

PC4070003 – Powerflex Bush Kit, Front Wishbone Rear Inner

Description:

Powerflex bush kit for the front wishbone rear inner mounting including metal inserts and washers.
The number of bushes in this kit is x2; this is the required amount to upgrade the rear inner mounting pivots on the front wishbone.

To fit:
944 inc S, S2 & Turbo 1985-1991 Front wishbone inner rear mounting - D shaped bush
968 1992-1995 Front wishbone inner rear mounting - D shaped bush

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 2 Powerflex Part number PFF57-303 Replaces OE bush 95134102301

Additional Vehicle Info: 944,968

---

PC4110001 – Powerflex Bush Kit, Rear Anti-Roll Bar, 15mm

Description:

Powerflex rear anti-roll bar bush kit for a 15mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the rear anti-roll bar.

To fit:
911 1968-1973
912 1968-1969

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 911 (1968,1969,1970,1971,1972,1973) - 912 (1968)

Notes:Diagram ref no 12 Powerflex Part number PFR57-412-15 Replaces OE bush 90133379303

Additional Vehicle Info: 911,912

---

PC4110002 – Powerflex Bush Kit, Rear Anti-Roll Bar, 16mm

Description:

Powerflex rear anti-roll bar bush kit for a 16mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the rear anti-roll bar.

To fit:
911 1965-1968
912 1965-1968
914 1970-1976

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 911 (1965,1966,1967) - 912 (1965,1966,1967) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:Diagram ref no 12 Powerflex Part number PFR57-412-16 Replaces OE bush 90133379304

Additional Vehicle Info: 911,912,914

---

PC4110003 – Powerflex Bush Kit, Rear Anti-Roll Bar, 18mm

Description:

Powerflex rear anti-roll bar bush kit for an 18mm bar, please measure before ordering.
The number of bushes in this kit is x4; this is the required amount to upgrade all bushes on the rear anti-roll bar.

To fit:
911 1974-1977
911 (930) Turbo 1975-1977

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 911 (1974,1975,1976,1977) - 930 (1975,1976,1977)

Notes:Diagram ref no 12 Powerflex Part number PFR57-412-18 Replaces OE bush 91133379305

Additional Vehicle Info: 911,930

---

PC4110004 – Powerflex Bush Kit, Rear Anti-Roll Bar, 18mm

Description:

Powerflex rear anti-roll bar bush kit for an 18mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the rear anti-roll bar.

To fit:
911 1978-1986
911 (930) Turbo 1978-1984, 1989
911 (964) C4 1989-1994
911 (964) Carrera RS 1989-1994
911 (993) C2/C4 1994-1998 Vehicles with standard suspension
911 (993) C2S/C4S 1994-1998 Vehicles with sport suspension
944 inc S2 & Turbo 1985-1991 with 18mm bar
968 1992-1995 Vehicles with M030 sport suspension and M249 tiptronic transmission

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 911 (1978,1979,1980,1981,1982,1983,1984,1985) - 930 (1978,1979,1980,1981,1982,1983,1984,1989) - 944 (1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995) - 993 (1994,1995,1996,1997,1998)

Notes:Diagram ref no 12 Powerflex Part number PFF57-209-18 Replaces OE bush 477411313N

Additional Vehicle Info: 911,930,944,964,968,993

---

PC4110005 – Powerflex Bush Kit, Front or Rear Anti Roll Bar, 20mm

Description:

Powerflex anti roll bar bush kit for a 20mm bar, please measure before ordering.

The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the front or rear anti roll bar depending on vehicle.

To fit:
911 (930) Turbo 1985-1988 Rear anti roll bar
911 (964) 1991-1994 C2/C4 Rear anti roll bar vehicles with manual transmission
911 (993) 1994-1998 Rear anti roll bar vehicles with M030 Sport type chassis
924 1976-1977 Front anti roll bar
924S 1986-1988 Rear anti roll bar for vehicles with M030 Sport type chassis
944 1982-1985 Rear anti roll bar for vehicles with sports suspension
944 1985-1988 Rear anti bar with 20mm bar (check size)

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1986,1987,1988) - 930 (1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988) - 964 (1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Notes:Diagram ref no 12 - Rear applications Diagram ref no 3 - Front applications Powerflex Part number PFF57-209-20 Replaces OE bush 477411313C

Additional Vehicle Info: 924,930,944,964,993

---

PC4110006 – Powerflex Bush Kit, Rear Anti-Roll Bar, 21mm

Description:

Powerflex rear anti-roll bar bush kit for a 21mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the rear anti-roll bar.

To fit:
911 Carrera 1986-1989
911 (964) Carrera 2 Turbo Look 1989-1994
911 (993) Turbo 1995-1998

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 911 (1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Notes:Diagram ref no 12 Powerflex Part number PFF57-209-21 Replaces OE bush 477411313M

Additional Vehicle Info: 911,964,993

---

PC4110007 – Powerflex Bush Kit, Rear Anti Roll Bar, 14mm

Description:

Powerflex rear anti roll bar bush kit for a 14mm bar, please measure before ordering.

The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the rear anti roll bar.

To fit:
924 1976-1979 with 14mm bar (check size)
924 1980-1985 not Carrera GT
924 S 1986-1988 not Sport-type chassis
944 1982-1985
944 inc S2 & Turbo 1985-1991 with 14mm bar (check size)

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:Diagram ref no 6 Powerflex Part number PFF57-209-14 Replaces OE bush 477411313F

Additional Vehicle Info: 924,944

---

PC4110008 – Powerflex Bush Kit, Rear Anti-Roll Bar, 16mm

Description:

Powerflex rear anti-roll bar bush kit for a 16mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the rear anti-roll bar.

To fit:
924 Carrera GT 1981
944 inc S2 & Turbo 1989-1991 with 16mm bar (check size)
968 1992-1995 not Sport-type chassis

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 6 Powerflex Part number PFF57-209-16 Replaces OE bush 477411313A

Additional Vehicle Info: 944,968

---

PC4110009 – Powerflex Bush Kit, Rear Anti-Roll Bar, 19mm

Description:

Powerflex rear anti-roll bar bush kit for a 19mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both bushes on the rear anti-roll bar.

To fit:
911 (964) C2 1989-1994 with Tiptronic transmission
968 1992-1995 with M030Sport-type chassis and 6 speed manual transmission

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995)

Notes:Powerflex Part number PFF57-209-19 Replaces OE bush 96433379200

Additional Vehicle Info: 964,968

---

PC4110010 – Powerflex Bush Kit, Front or Rear Anti Roll Bar, 22mm

Description:

Powerflex anti roll bar bush kit for a 22mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the front or rear anti roll bar depending on vehicle.

To fit:
911 (964) Turbo 1991-1994 Rear anti roll bar
924 1978 Front anti roll bar

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1978) - 964 (1991,1992,1993,1994)

Notes:Diagram ref no 12 Rear applications Diagram ref no 3 Front applications Powerflex Part number PFF57-209-22 Replaces OE bush 477411313E

Additional Vehicle Info: 924,964

---

PC4110011 – Powerflex Bush Kit, Front Anti-Roll Bar, 23mm

Description:

Powerflex front anti-roll bar bush kit for a 23mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the front anti-roll bar.

To fit:
924 1976-1988
944 1982-1985

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985)

Notes:Diagram ref no 3 Powerflex Part number PFF57-209-23

Additional Vehicle Info: 924,944

---

PC4110012 – Powerflex Bush Kit, Front Anti-Roll Bar, 24mm

Description:

Powerflex front anti-roll bar bush kit for a 24mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade both D bushes on the front anti-roll bar.

To fit:
924 1976-1988 Front
944 1982-1985 Front

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985)

Notes:Diagram ref no 6 Powerflex Part number PFF57-209-24

Additional Vehicle Info: 924,944

---

PC4110013 – Powerflex Bush Kit, Front Anti-Roll Bar, 21.5mm

Description:

Powerflex front anti-roll bar bush kit for 21.5mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

To fit:
944 inc S 1987-1988 not Turbo
944 1989-1991 check size

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1987,1988,1989,1990,1991)

Notes:Diagram ref no 3 Powerflex Part number PFF57-204-21.5 Replaces OE bush 95134379407

Additional Vehicle Info: 944

---

PC4110014 – Powerflex Bush Kit, Front Anti-Roll Bar, 25.5mm

Description:

Powerflex front anti-roll bar bush kit for 25.5mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

To fit:
944 Turbo 1985-1988
944 1989-1991 check size

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1985,1986,1987,1988,1989,1990,1991)

Notes:Diagram ref no 3 Powerflex Part number PFF57-204-25.5 Replaces OE bush 95134379402

Additional Vehicle Info: 944

---

PC4110015 – Powerflex Bush Kit, Front Anti-Roll Bar, 26.8mm

Description:

Powerflex front anti-roll bar bush kit for a 26.8mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

To fit:
944 inc S 1987-1988 with M030 Sport-type chassis
944 1989-1991 check size
968 1992-1995

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 944 (1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 3 Powerflex Part number PFF57-204-26.8 To replace OE bush 95134379404

Additional Vehicle Info: 944,968

---

PC4110016 – Powerflex Bush Kit, Front Anti-Roll Bar, 30mm

Description:

Powerflex front anti-roll bar bush kit for a 30mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

To fit:
968 1992-1995 vehicles with M030 Sport-type chassis

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 3 Powerflex Part number PFF57-204-30 Replaces OE bush 95134379405

Additional Vehicle Info: 968

---

PC4110017 – Powerflex Bush Kit, Front Anti-Roll Bar, 20mm

Description:

Powerflex front anti-roll bar bush kit for a 20mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

This is a round bush, 35mm outside body diameter and 41mm overall length

To fit:
924 1976-1988 up to chassis Nr 92CN4 02197, and Turbo, GT up to 93CN1 00305
944 1982-1985

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985)

Notes:Diagram ref no 3 Powerflex Part number PFF57-305-20

Additional Vehicle Info: 924,944

---

PC4110018 – Powerflex Bush Kit, Front Anti-Roll Bar, 21mm

Description:

Powerflex front anti-roll bar bush kit for a 21mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

This is a round bush, 35mm outside body diameter and 41mm overall length

To fit:
924 2.0 1980-1985 upto chassis number 92CN4 02197 (check size)
924 Turbo 1980-1984 upto chassis number 93CN1 00305 (check size)

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1980,1981,1982,1983,1984,1985)

Notes:Diagram ref no 3 Powerflex Part number PFF57-305-21 Replaces OE bush 477411313K

Additional Vehicle Info: 924

---

PC4110019 – Powerflex Bush Kit, Front Anti-Roll Bar Inner, 23mm

Description:

Powerflex front anti-roll bar bush kit for a 23mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

To fit:
924 S 2.5 1986-1988 with M030 Sport-type chassis
944 1984-1985 with M404 Anti-roll bar front and rear
944 1982-1985 with Sports suspension
944 1985-1986 with Sport-type chassis and M404 Anti-roll bar front and rear

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1982,1983,1984,1985,1986)

Notes:Diagram ref no 3, Powerflex Part number PFF57-305-23, Replaces OE bush 477411053J

Additional Vehicle Info: 924,944

---

PC4110020 – Powerflex Bush Kit, Front Anti-Roll Bar, 20mm

Description:

Powerflex front anti-roll bar bush kit for a 20mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

This is a round bush, 40mm outside body diameter and 55mm overall length

To fit:
924 2.0 1980-1985 from chassis number 92CN4 02198>> (check size)
924 Turbo 1980-1984 from chassis number 93CN1 00306>> (check size)
924 S 2.5 1986-1988
944 1982-1986

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986)

Notes:Diagram ref no 3 Powerflex Part number PFF57-306-20 Replaces OE bush 477411053G

Additional Vehicle Info: 924,944

---

PC4110021 – Powerflex Bush Kit, Front Anti Roll Bar, 21.5mm

Description:

Powerflex front anti roll bar bush kit for a 21.5mm bar, please measure before ordering.

The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti roll bar.

To fit:
924 2.0 1980-1985 from chassis number 92CN4 02198>> (check size)
924 Turbo 1980-1984 from chassis number 93CN1 00306>> (check size)
944 1982-1983 with M404 anti roll bar front and rear

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1980,1981,1982,1983,1984,1985) - 944 (1982,1983)

Notes:Diagram ref no 3 Powerflex Part number PFF57-306-21.5 To replace OE bush 477411053N

Additional Vehicle Info: 924,944

---

PC4110022 – Powerflex Bush Kit, Front Anti-Roll Bar Inner, 23mm

Description:

Powerflex front anti-roll bar bush kit for a 23mm bar, please measure before ordering.
The number of bushes in this kit is x2; this is the required amount to upgrade the inner round bushes on the front anti-roll bar.

To fit:
924 2.0 1979-1985 upto chassis number 92CN4 02197 (check size)
924 Turbo 1979-1984 upto chassis number 93CN1 00305 (check size)

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1979,1980,1981,1982,1983,1984,1985)

Notes:Diagram ref no 3, Powerflex Part number PFF57-306-23, Replaces OE bush 477411313H

Additional Vehicle Info: 924,944

---

PC4110023 – Powerflex Bush Kit, Front Anti-Roll Bar to Wishbone

Description:

Powerflex front anti-roll bar to wishbone bush kit.
The number of bushes in this kit is x2, this is the required amount to upgrade both front anti-roll bar to wishbone bushes located in the aluminium wishbone brackets.

To fit:
924 2.0 1980-1985 from chassis number 92CN4 02198>> (check size)
924 Turbo 1980-1984 from chassis number 93CN1 00306>> (check size)
924 S 2.5 1986-1988
944 1982-1985

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985)

Notes:Diagram ref no 4 Powerflex Part number PFF57-307 Replaces OE bush 171411314A

Additional Vehicle Info: 924,944

---

PC4110024 – Powerflex Bush Kit, Front Anti-Roll Bar Drop Links

Description:

Powerflex front anti-roll bar drop link to wishbone bush kit.
The number of bushes in this kit is x4, this is the required amount to upgrade both front anti-roll bar drop links.

To fit:
924 2.0 1976-1985 upto chassis number 92CN4 02197
924 Turbo 1979-1984 upto chassis number 93CN1 00305

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)

Notes:Diagram ref no 5 Powerflex Part number PFF57-308 Replaces OE bush 477411041B

Additional Vehicle Info: 924

---

PC4110040 – Eibach Pro-Kit Lowering Spring Kit, E7201-140

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 30-40mm, rear axle approx. 30mm

Compatible Vehicles: - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 964

---

PC4110041 – Eibach Pro-Kit Lowering Spring Kit, E10-72-007-01-22

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 30mm, rear axle approx. 30mm

Compatible Vehicles: - 997 (2005,2006,2007,2008)

Additional Vehicle Info: 997

---

PC4110042 – Eibach Pro-Kit Lowering Spring Kit, E7208-140

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 30mm, rear axle approx. 30mm

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

---

PC4110043 – Eibach Pro-Kit Lowering Spring Kit, E10-72-007-02-22

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 20mm, rear axle approx. 20mm

Compatible Vehicles: - 997 (2005,2006,2007,2008)

Additional Vehicle Info: 997

---

PC4110044 – Eibach Pro-Kit Lowering Spring Kit, E10-72-006-01-22

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 30mm, rear axle approx. 30mm

Compatible Vehicles: - 987 Boxster (2005,2006,2007,2008)

Additional Vehicle Info: 987 Boxster

---

PC4110045 – Eibach Pro-Kit Lowering Spring Kit, E10-72-008-01-22

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 30mm, rear axle approx. 30mm

Compatible Vehicles: - 987 Cayman (2006,2007,2008)

Additional Vehicle Info: 987 Cayman

---

PC4110046 – Eibach Pro-Kit Lowering Spring Kit, E7213-140

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 30mm, rear axle approx. 30mm

Compatible Vehicles: - 996 (1998,1999,2000,2001,2002,2003,2004,2005)

Additional Vehicle Info: 996

---

PC4110047 – Eibach Pro-Kit Lowering Spring Kit, E7212-140

Description:

• Improves handling and vehicle stability
• Engineered for comfort and sporty performance
• Lowers front axle approx. 25mm, rear axle approx. 25mm

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004)

Additional Vehicle Info: 986 Boxster

---

PC4110051 – KW Variant 1 Inox Line Coilover Suspension Kit

Description:

KW Variant 1 ''inox line'' coilover suspension kit.

The KW Variant 1 ''inox-line'' coilover kit has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimised balance of sportiness and comfort while driving.

To fit:
911 (964) Carrera 2 Coupe/Cabriolet/Targa 12/1988-11/1990

Lowers car by: Front 30-60mm, Rear 20-40mm

The KW Variant 1 ''inox line'' coilover suspension kit is KW’s entry model. It is designed for more driving pleasure and attractive adjustable lowering. Supplied with the highest quality finish with the struts made of stainless steel and the springs and bump stops being corrosion resistant. They are height adjustable but not damping adjustable.

With the KW Variant 1 ''inox line'' coilover you can achieve maximum lowering in the tested adjustment range. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar.

KW Variant 1 ''inox-line'' coilover satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW Variant 1 ''inox-line'' coilover, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology ''inox-line''
- Individually height adjustable
- Tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Compatible Vehicles: - 964 (1989,1990)

Additional Vehicle Info: 964

---

PC4110062 – KW Variant 1 Inox Line Coilover Suspension Kit

Description:

KW Variant 1 ''inox line'' coilover suspension kit.

The KW Variant 1 ''inox-line'' coilover kit has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimised balance of sportiness and comfort while driving.

To fit:
911 (993) Carrera 4/4S/Turbo - Coupe/Cabrio/Targa 07/1994-07/1998

The KW Variant 1 ''inox line'' coilover suspension kit is KW’s entry model. It is designed for more driving pleasure and attractive adjustable lowering. Supplied with the highest quality finish with the struts made of stainless steel and the springs and bump stops being corrosion resistant. They are height adjustable but not damping adjustable.

With the KW Variant 1 ''inox line'' coilover you can achieve maximum lowering in the tested adjustment range. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar.

KW Variant 1 ''inox-line'' coilover satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW Variant 1 ''inox-line'' coilover, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology ''inox-line''
- Individually height adjustable
- Tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Notes:

" Important Fitting Notice ".

" Please thoroughly clean and lightly lubricate the threads of the shock & adjusting collar prior to turning the collar.

This will avoid galling, thread damage and any dirty threads."

Additional Vehicle Info: 993

---

PC4110086 – KW Variant 1 Inox Line Coilover Suspension Kit

Description:

KW Variant 1 ''inox line'' coilover suspension kit.

The KW Variant 1 ''inox-line'' coilover kit has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimised balance of sportiness and comfort while driving.

To fit:
Boxster (986) 2.5-2.7 1998-2004
Boxster (986) S 3.2 1998-2004

Lowers car by: Front 20-40mm, Rear 20-40mm

The KW Variant 1 ''inox line'' coilover suspension kit is KW’s entry model. It is designed for more driving pleasure and attractive adjustable lowering. Supplied with the highest quality finish with the struts made of stainless steel and the springs and bump stops being corrosion resistant. They are height adjustable but not damping adjustable.

With the KW Variant 1 ''inox line'' coilover you can achieve maximum lowering in the tested adjustment range. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar.

KW Variant 1 ''inox-line'' coilover satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW Variant 1 ''inox-line'' coilover, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology ''inox-line''
- Individually height adjustable
- Tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Compatible Vehicles: - 986 Boxster (1998,1999,2000,2001,2002,2003,2004)

Notes:

Important Fitting Notice
Please thoroughly clean and lightly lubricate the threads of the shock adjusting collar prior to turning the collar. This will avoid galling, thread damage and any dirty threads.

Additional Vehicle Info: 986 Boxster

---

PC4110091 – KW Variant 3 Adjustable Shock Kit - G Series 19mm

Description:

KW Variant 3 complete set of rebound and compression adjustable shock absorbers for the Porsche 911 G series that lowers 19mm.

This KW V3 damper kit eliminates the need for costly and time consuming strut conversions to front and rear of the 911 (from model year 1974) built from 1973 - 1989. Instead KW's adjustable damper package works with the standard front and rear torsion bars already in place, allowing G-series owners to take control of their car's chassis setup. In addition this kit replicates the threaded wheel carrying 'knuckles' which are one of the key characteristics of this generation 911, and all in galvanised mild steel for a long and durable life.

Rebound is adjusted at the piston rod end and provides sixteen clicks of adjustment. Compression adjustment is carried out via a 12-position adjuster on the upper damper housing. ''Increased rebound forces ensure tighter handling and a significantly reduced rolling of the body. At very high speeds, the steering precision is improved at the driving dynamic limit, while on the uneven and wavy road surfaces, a lower rebound stage is advantageous.''

Both this kit and standard height version are TUV approved.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,930

---

PC4110092 – KW Clubsport 2-Way Coilover Kit

Description:

KW Clubsport 2-way coilovers including top mounts for the Porsche 911 G series.

The KW Clubsport coilovers combine KW's high-end racing technology with maintenance-free KW OEM components and part certificate.
The KW Clubsport 2-way provides the user numerous adjustment settings. This allows the user to dial the suspension setup to his/hers driving style and to adjust or match the tire/wheel setup of the vehicle.

The rebound adjuster knob provides 16 precise clicks to personally dial in your desired vehicle setup. Thus allowing you the possibility to influence wheel/tire loads or take into concern chassis characteristics. Independent from rebound adjustment is the compression dampening, 12 precise adjustment clicks are provided to adjust the low-speed dampening. Most notably used to dial in wheel/tire setup.

These adjustment features allow the user to dial in vehicle weight, wheel/tire combinations, various road surfaces and environmental conditions.

- Independently adjustable rebound and compression damping technology
- Stainless steel technology ''inox-line''
- Continuous lowering
- TÜV-tested adjustment range
- High-quality components for a long-term durability
- Adjustable rebound damping with 16 precise clicks
- Adjustable compression damping with 12 precise clicks
- Unique, independent damping force adjustment
- optional spherical bearing aluminium top mounts

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Notes:

" Important Fitting Notice ".

" Please thoroughly clean and lightly lubricate the threads of the shock & adjusting collar prior to turning the collar.

This will avoid galling thread damage and any dirty threads."

Additional Vehicle Info: 911,930

---

PC4240001 – Handbrake Lever Handle Silver Aluminium

Description:

Handbrake lever handle in silver anodised aluminium, complete with button.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911,912,930

---

PC4240002 – Shift Rod Coupling Friction Bush Kit

Description:

• Includes 2 Delrin bushes for one coupling
• OE fitment for easy installation
• 24-month unlimited mileage warranty

Restore the crisp feel of your manual transmission with this upgraded friction bush kit. Designed as a direct replacement for worn or broken OE bushings, this kit includes two high-strength Delrin bushes—enough for one coupling. Engineered for durability and performance, these bushes are built to withstand heat, fatigue, and repeated movement.

Manufactured to OE specifications, installation is simple and precise. The Delrin material offers superior wear resistance compared to standard bushings, ensuring long-lasting performance. Backed by a 24-month unlimited mileage warranty, this kit is a smart upgrade for any manual transmission enthusiast.

Compatible Vehicles: - 356 (1960,1961,1962,1963) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1973,1974,1975,1976) - 924 (1976,1977,1978,1979) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988)

Notes:

To replace OE bush 96442422300, part of 91142402404

Not for vehicles with G50 type transmission

Additional Vehicle Info: 356,911,912,914,924,930

---

PC4240003H – Powerflex Heritage Shift Rod Coupling Friction Bush Kit

Description:

Powerflex Heritage Series upgraded replacement friction bush kit for the gear shift rod coupling. Kit includes 2 bushes, enough for one coupling.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector’s car, whilst retaining the same standard appearance of a rubber bush.

Compatible Vehicles: - 356 (1960,1961,1962,1963) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988)

Notes:

To replace OE bush 96442422300, part of 91142402404

Not for vehicles with G50 type transmission

Additional Vehicle Info: 356,911,912,914,924,930

---

PC5010001 – Powerflex Bush Kit, Rear Axle Carrier Outer Mounting

Description:

Powerflex rear axle carrier outer mounting bush kit including metal inserts.
The number of bushes in this kit is x2; this is the required amount to upgrade both rear outer mounting points on the rear axle carriers.

To fit:
924 inc S 1976-1988
944 inc S2 & Turbo 1982-1991
968 1992-1995

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 7 Powerflex Part number PFR57-220 To replace OE bush 477501069A

Additional Vehicle Info: 924,944,968

---

PC5010002 – Powerflex Bush Kit, Rear Trailing Arm Inner

Description:

Powerflex rear trailing arm inner bush kit complete with metal inserts and washers.
The number of bushes in this kit is x2, this is the required amount to upgrade both rear trailing arm inner pivots.

To fit:
924 inc S 1976-1988
944 inc S2 & Turbo 1985-1991
968 1992-1995

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 8 Powerflex Part number PFR57-222

Additional Vehicle Info: 924,944,968

---

PC5010003 – Powerflex Bush Kit, Rear Axle Strut Tube

Description:

Powerflex rear axle strut tube bush kit.
The number of bushes in this kit is x2; this is the required amount to upgrade both axle strut tubes on the rear axle.

To fit:
924 S 1986-1988
944 inc S2 & Turbo 1985-1991
968 1992-1995

Benefits of replacing your vehicles OE rubber suspension bushes with Polyurethane are:
-Better road holding
-Constant steering geometry
-Increased tyre life
-More responsive steering & handling
-Longer service life of suspension components

Compatible Vehicles: - 924 (1986,1987,1988) - 944 (1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995)

Notes:Diagram ref no 9 Powerflex Part number PFR57-223 To fit rear axle strut OE part number 95133302100

Additional Vehicle Info: 924,944,968

---

PC5050001 – Rear Bumper Lower Valance Panel, Fibreglass

Description:

• Durable fiberglass with gel-coat finish
• Fits GT3-style or custom center exhausts
  
• Includes cut-out template for dual exhaust
  

This gel-coat fiberglass lower panel is designed to fit perfectly with "GT3 style" center outlet exhausts such as JP: 1620614300, 1620614200, 1620802210, and 1620802410. It also accommodates other alternative exhaust setups. The panel comes without a pre-cut exhaust opening, giving you flexibility for custom configurations. For ease of installation, a cut-out template is provided for dual center exhaust setups.

PLEASE NOTE: Installation of this part must be done by persons with matching skills, since measuring, precision cutting and drilling is necessary to obtain a satisfying result. Make sure to test fit prior to painting.

To fit:

911 1974-1989 (not Turbo models)

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: 911

---

PC5310002 – Interior Door Handle Set, Silver Aluminium

Description:

• Silver anodised aluminium for a clean, simple look
• Easy to install, supplied as a pair
• A durable replacement for plastic handles

This silver anodised aluminium handle set is a simple and durable update for your interior doors. A great alternative to black plastic handles, they are easy to fit and built to last. Supplied as a pair, with a matching door knob set also available.

Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)

Additional Vehicle Info: 911,912,912E,930,964

---

PC5370001 – Interior Door Knob Set Black Aluminium

Description:

Interior door knob set in black anodised aluminium with chrome cap. One set per door.

Also available in anodised silver finish (PC5370002)

Compatible Vehicles: - 911 (1985,1986,1987,1988,1989) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,928,930,964,993

---

PC5370002 – Interior Door Knob Set, Silver Aluminium

Description:

• Silver anodised aluminium for a clean, simple look
• Easy to install, one set required per door
• A durable replacement for plastic

This silver anodised aluminium door knob with surround is a simple and durable update for your interior doors. A great alternative to black plastic, they are easy to fit and built to last. Supplied as a set for one door, with a matching door handle set also available.

Also available in anodised black finish (PC5370001)

Compatible Vehicles: - 911 (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,928,930,964,993

---

PC5510050 – Door Sill Protector Set Stainless Steel

Description:

Door sill protector set in polished stainless steel.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,930,964,993

---

PC5520001 – Fuel Filler Flap Release Knob in Aluminium

Description:

Fuel filler flap release knob in aluminium.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,930,964,993

---

PC5550001 – Interior Door Lock Pin Set, Silver Aluminium

Description:

• Silver aluminium for a clean, simple look
• Easy to install, supplied as a pair
• A durable replacement for plastic

These aluminium door lock pins are a simple and durable update for your interior doors. A great alternative to black plastic, they are easy to fit and built to last. Supplied as a pair.

Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988)

Additional Vehicle Info: 911,912,912E,930

---

PC6020003 – 123 Ignition Distributor with Vacuum Advance

Description:

• 16 advance curves for precise tuning
• Microprocessor-controlled accuracy
  
• Easy installation and setup
  

The 123 Ignition Distributor Porsche-4-R-V uses a microprocessor-controlled system to deliver accurate and reliable spark timing. With its advanced features, customisable settings, and reliable performance, the system is designed to be easy to install and set up. This high-performance electronic ignition system is specifically designed for classic Porsche engines, making it an ideal upgrade for enthusiasts seeking optimal performance.

The distributor also features a built-in LED indicator that shows the current advance curve selection and a vacuum advance unit that provides additional advance based on engine load and speed. This feature allows for smoother acceleration and better fuel efficiency. Overall, the 123 Ignition Distributor Porsche-4-R-V is an excellent choice for anyone looking to upgrade their classic Porsche ignition system.

- Operating voltage: 4-15V

- Wiring: Black = coil, Blue = battery negative, Red = Ignition key (battery 6V/12V)

- Rotation direction: Clockwise and counter clockwise

- Vacuum: Yes

- RPM range: 500-8000 RPM

- IE (D-jetronic support): None

- Dwell: Constant current: fully automatic adaptive dwell

- Environmental temperature: 30 – 100 °C

- Coil Charging Time: After 1 second, coil current is turned off

- Spark balancing: <0.5 degrees

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:

123ignition recommend replacing the coil when fitting a new 123ignition distributor. Recommended primary resistance 3 Ohm, minimum 1 Ohm.

If the 123ignition does not work properly with the ballast resistor from the ignition coil, remove the ballast resistor.

Additional Vehicle Info: 356,912,912E,914

---

PC6020004 – 123 Ignition Distributor with Vacuum Advance, D-Jetronic

Description:

• 16 advance curves for precise tuning
• Microprocessor-controlled accuracy
  
• Easy installation and setup
• For engines with D-Jetronic fuel injection

The 123 Ignition Distributor Porsche-4-R-V uses a microprocessor-controlled system to deliver accurate and reliable spark timing. With its advanced features, customisable settings, and reliable performance, the system is designed to be easy to install and set up. This high-performance electronic ignition system is specifically designed for classic Porsche engines with D-Jetronic fuel injection, making it an ideal upgrade for enthusiasts seeking optimal performance.

The distributor also features a built-in LED indicator that shows the current advance curve selection and a vacuum advance unit that provides additional advance based on engine load and speed. This feature allows for smoother acceleration and better fuel efficiency. Overall, the 123 Ignition Distributor Porsche-4-R-V is an excellent choice for anyone looking to upgrade their classic Porsche ignition system.

- Operating voltage: 4-15V

- Wiring: Black = coil, Blue = battery negative, Red = Ignition key (battery 6V/12V)

- Rotation direction: Clockwise and counter clockwise

- Vacuum: Yes

- RPM range: 500-10000 RPM

- IE (D-jetronic support): YES

- Dwell: Constant current: fully automatic adaptive dwell

- Environmental temperature: 30 – 100 °C

- Coil Charging Time: After 1 second, coil current is turned off

- Spark balancing: <0.5 degrees

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:

123ignition recommend replacing the coil when fitting a new 123ignition distributor. Recommended primary resistance 3 Ohm, minimum 1 Ohm.

If the 123ignition does not work properly with the ballast resistor from the ignition coil, remove the ballast resistor.

Additional Vehicle Info: 356,912,914

---

PC6020012 – nan

---

PC6020013 – nan

---

PC6020050 – Clamp for 123 Ignition Distributor, Aluminium

Description:

• Replaces original 2mm thick clamp
• Ensures optimal distributor pressure
• Prevents distributor from resting on drive shaft

This billet aluminium clamp is designed specifically for the 123IGNITION distributor used in Porsche 356 and 912 models. It replaces the original 2mm thick clamp and the spacer ring, ensuring that the distributor is mounted correctly within the 3-piece engine housing. The clamp's design guarantees optimal pressure, preventing the distributor from resting too low on the drive shaft, which can cause operational issues.

With a clamping surface of 9mm, significantly larger than the original 2mm, this clamp ensures a secure fit that prevents slipping into the groove. By replacing the spacer ring supplied with the Porsche 123IGNITION distributor, this clamp provides a more reliable and stable installation, enhancing the overall performance and longevity of your classic Porsche engine.

Compatible Vehicles: - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969)

Additional Vehicle Info: 356,912

---

PC6030001 – Voltage Regulator for Alternator

Description:

Voltage regulator to fit Bosch alternators.

To fit the following alternators:
996-603-012-00, 996-603-012-01, 996-603-012-03, 996-603-012-05
996-603-012-02, 996-603-012-06
955-603-017-00, 955-603-017-01

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)

Additional Vehicle Info: 986 Boxster,996

---

PC6040900 – Starter Motor Adaptor Terminal, Universal

Description:

Starter motor adaptor terminal. This handy little adaptor helps to relocate the main battery terminal to the rear of the unit, helping to ease fitment in tight situations.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 964 (1989,1990,1991,1992,1993,1994) - 968 (1992,1993,1994,1995) - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 987 Cayman (2006,2007,2008,2009,2010,2011,2012) - 987 Boxster (2005,2006,2007,2008,2009,2010,2011,2012) - 993 (1994,1995,1996,1997,1998) - 996 (1998,1999,2000,2001,2002,2003,2004,2005) - 997 (2005,2006,2007,2008,2009,2010,2011,2012) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 356,911,912,912E,914,924,928,930,944,964,968,986 Boxster,987 Boxster,987 Cayman,993,996,997,Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T25,T2 Bay,T2 Split

---

PC6050001 – nan

---

PC6130001 – Headlight Switch Trim Ring Aluminium

Description:

Trim ring for the headlight switch in aluminium.

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

---

PC6130002 – Headlight Switch Trim Ring Black Aluminium

Description:

Trim ring for the headlight switch in black anodised aluminium.

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

---

PC6130004 – Ignition Switch Trim Ring Aluminium

Description:

Trim ring/cover plate for the ignition switch in aluminium.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,930,964,993

---

PC6130005 – Ignition Switch Trim Ring Black Aluminium

Description:

Trim ring/cover plate for the ignition switch in black anodised aluminium.

Compatible Vehicles: - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 911,930,964,993

---

PC6310001 – Front Fog Light Marchal Style

Description:

• Authentic 50s & 60s vintage design
• Iconic crest-shaped glass
  
• White 12v bulb included
  

Enhance your classic car with this authentic Marchal-style front fog light, a timeless accessory that brings the charm of the 1950s and 60s to your vehicle. Featuring the iconic peak on the front bezel and the distinctive crest-shaped glass with a central cone, this lamp is a perfect blend of style and functionality. The glass is marked with the numbers "670 680" and "Made In France," adding to its vintage authenticity. With an overall diameter of 140mm and a depth of 85mm, it's an ideal fit for many classic models.

Whether you're restoring a classic car or adding a period-correct touch, this lamp is a must-have accessory that celebrates the elegant design and craftsmanship of the past.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - 356 (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: 356,911,912,930,Beetle,Beetle Cabriolet,T2 Bay,T2 Split

---

PC6310002 – Indicators Lens Set Clear

Description:

Clear indicator lens set. Supplied as a pair to fit left and right.

Fitted to Carrera 4 and Turbo models from 1995 onwards as standard, but a great upgrade for earlier models fitted with amber indicators.

Compatible Vehicles: - 993 (1994,1995,1996,1997,1998)

Additional Vehicle Info: 993

---

PC6310003 – Indicator Lens Set Clear

Description:

Clear indicator lens set. Supplied as a pair to fit left and right.

To fit:
944 S2/Turbo 1986-1991

Compatible Vehicles: - 944 (1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: 944

---

PC6310004 – Indicator Side Repeater Set Crystal Clear

Description:

Crystal clear indicator side repeater set. Supplied as a pair to fit left and right. Amber bulbs included.

Ideal upgrade for models fitted with amber indicators.

Compatible Vehicles: - 986 Boxster (1997,1998,1999,2000,2001,2002,2003,2004) - 996 (1998,1999,2000,2001,2002,2003,2004,2005)

Additional Vehicle Info: 986 Boxster,996

---