Fitment #41

131-415-802/E – Tie Rod Long Complete for Left Hand Drive

Description:

Tie rod, long, complete with tie rod ends to fit left hand drive Beetle from May 1968 to 1979.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970) - Beetle USA (1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-802/E/B – Tie Rod Long Left Hand Drive Bare

Description:

Left hand drive long tie rod without tie rod ends. The clamps for the tie rods are included.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Beetle USA (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-811 – Outer or Inner Tie Rod End with Left Hand Thread

Description:

Left-hand thread for easy fitment
Compatible with inner or outer tie rods
Meyle brand with a 2-year warranty

This high-quality tie rod end with a left-hand thread is designed for easy installation on either the inner or outer tie rod, depending on your vehicle. Please refer to the compatibility chart below for precise fitment. Backed by a 2-year warranty, this Meyle part ensures durability and performance for long-term reliability.

To fit
Beetle: outer up to 07/1967
Beetle: Inner for long rod up to 1960
Type 3: inner for long rod up to 1967 -07/67
Ghia: Inner for long rod
Splitscreen: outer 56-67

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968) - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Notes:Check the male thread size on your vehicles track rod end to ensure you are ordering the correct part This one has an M10 thread

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

131-415-812 – Outer Tie Rod End with Right Hand Thread

Description:

Outer tie rod end with right-handed thread
Durable construction for long-lasting performance
Backed by a 2-year Meyle warranty

This outer tie rod end features a right-handed thread and is designed for optimal performance and durability. Manufactured by Meyle, a trusted brand known for its high-quality auto parts, this component comes with a 2-year warranty for peace of mind. Refer to the fitment chart below for compatibility with your vehicle.

To fit
Beetle 50-67 up to chassis >> 118 857 239
Karmann Ghia 56-68 up to chassis >>118 857 239
Type 3 61-73 up to chassis >> 317 500 000

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968) - T2 Split Bus (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967)

Notes:Check the male thread size on your vehicles track rod end to ensure you are ordering the correct part

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

131-415-813/E – Inner Tie Rod End, Left Hand Thread with Steering Damper Eye

Description:

Durable inner tie rod end with left-hand thread
Meyle quality for long-lasting performance
Backed by a 2-year warranty for peace of mind

This inner tie rod end features a left-hand thread, providing a secure and stable connection for your vehicle’s steering system. Built to meet the highest standards, it ensures durability and reliable performance under various driving conditions.

Manufactured by Meyle, a trusted name in automotive parts, this component comes with a 2-year warranty, offering confidence and protection. It’s an excellent choice for those seeking quality and value in their vehicle’s suspension and steering repairs.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-821/A – Inner Tie Rod End with Right Hand Thread for the Short Tie Rod

Description:

Inner tie rod end with right-hand thread
Designed for short tie rod
Premium quality Meyle with 2-year warranty

This inner tie rod end is crafted to fit short tie rod applications, offering a perfect fit with its right-hand thread design. Built to last, it provides reliable steering performance and precise handling.

Made by the trusted brand Meyle, this product is backed by a 2-year warranty, ensuring peace of mind and long-term durability. Whether you're replacing a worn part or completing a repair, this high-quality tie rod end will meet your vehicle's needs.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-498-001 – Front Ball Joint Kit & Anti Roll Bar Overhaul Kit

Description:

Complete ball joint replacement kit
Includes anti-roll bar mounting kit
Quick, cost-effective maintenance solution

Restore your vehicle’s handling with our Front Ball Joint and Anti Roll Bar Overhaul Kit. This comprehensive kit includes everything you need to replace both upper and lower ball joints, as well as torsion arm seals and an anti-roll bar mounting kit complete with bushes. It’s designed for a precise fit and long-lasting performance.

By choosing our overhaul kit, you save time and money on maintenance. It simplifies the repair process, ensuring that you have all necessary components in one package for a hassle-free installation. Trust in our heritage kits to keep your vehicle running smoothly and efficiently.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-498-151/C – Torsion Arm Set With Ball Joints

Description:

Brand new, not rebuilt; forged for original strength
Features European-made ball joints installed for reliability
Includes grub screws and caps for easy installation
Ideal for enhancing suspension performance

Upgrade your suspension with EMPI Ball Joint Torsion Arms, crafted to match the quality and durability of the originals. These torsion arms are brand new and forged, ensuring they provide the strength and performance needed for your vehicle.

Each set comes complete with high-quality European-made ball joints already installed, along with grub screws and caps for a hassle-free installation. Enhance your ride's handling and stability with these reliable torsion arms, designed for both performance and longevity.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

131-498-441 – Top Mount Kit, for Front Shock

Description:

Fits 1966 and on Beetles and Karmann Ghias.
Includes top bushes, studs, and retaining nut.
Essential for a smooth ride.

This shock absorber top fitting kit is designed for 1966 onwards Beetles and Karmann Ghias. It’s essential for maintaining a smooth and comfortable ride, ensuring your suspension system works efficiently. The kit includes all necessary components, such as top bushes, mounting studs, and a retaining nut, providing everything you need for a seamless installation.

We recommend replacing the top mount whenever you replace the front stock absorbers for optimal performance. Additionally, a dust cover is available separately under part number 171-513-425, which helps protect the shock absorbers and extend their lifespan.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Karmann Ghia

131-501-189/A – Rear Suspension Bump Stop Bracket Left

Description:

Exact copy of original swing axle bracket
Ensures firm damping and stability
Durable replacement for rusted brackets

This left rear bump stop bracket is designed to fit swing axle suspension systems, offering an exact replica of the original part. It provides a perfect fit, making it an ideal replacement for old, rusted brackets. Engineered to deliver the same quality as the original, this bracket ensures firm damping and proper suspension function.

Built for durability, this bracket restores the performance and stability of your swing axle suspension. It helps maintain the smooth operation of your vehicle by absorbing shocks and preventing harsh impacts, prolonging the lifespan of your suspension system. Easy to install, it brings back the reliability of the original design with modern materials.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Beetle with swing axle Karmann Ghia with swing axle

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-501-190/A – Rear Suspension Bump Stop Bracket Right

Description:

Exact copy of original swing axle bracket
Ensures firm damping and stability
Durable replacement for rusted brackets

This right rear bump stop bracket is designed to fit swing axle suspension systems, offering an exact replica of the original part. It provides a perfect fit, making it an ideal replacement for old, rusted brackets. Engineered to deliver the same quality as the original, this bracket ensures firm damping and proper suspension function.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Beetle with swing axle. Karmann Ghia with swing axle.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-609-209 – Brake Shoe Adjusting Screw

Description:

Allows precise brake shoe adjustment
Fits with star adjusting nut inside backing plate
Sold individually

The Brake Shoe Adjusting Screw is essential for fine-tuning your brake shoes to ensure optimal performance. This part works in conjunction with the star adjusting nut 113-609-205/A located inside the backing plate, enabling precise adjustment of your brake shoes for improved braking efficiency.

Sold individually, this adjusting screw is a straightforward yet vital component for maintaining your vehicle’s braking system. It ensures that your brakes are properly aligned and functioning, contributing to both safety and performance.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-611-055 – Rear Brake Wheel Cylinder

Description:

Rear wheel brake cylinder

Wheel brake cylinders are a part of the braking system, they are important to the overall safety of the vehicle.
If your vehicle is displaying any of the following symptoms, spongey brake pedal, poor brake response, or fluid leaking underneath the car by the wheels it could be a sign that the wheel cylinders have come to the end of their life and need replacing.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-611-055/ATE – Rear Brake Wheel Cylinder

Description:

Rear wheel brake cylinder. This is an ATE product

Wheel brake cylinders are a part of the braking system, they are important to the overall safety of the vehicle.
If your vehicle is displaying any of the following symptoms, spongey brake pedal, poor brake response, or fluid leaking underneath the car by the wheels it could be a sign that the wheel cylinders have come to the end of their life and need replacing.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-611-055/F – Rear Brake Wheel Cylinder

Description:

Rear wheel brake cylinder for improved braking performance
High-quality, affordable product from FORST
Essential for vehicle safety and braking reliability

The rear wheel brake cylinder is a critical part of your vehicle's braking system, playing an essential role in ensuring safe and effective stopping power. Manufactured by FORST, this brake cylinder is designed to meet high-quality standards, offering both reliability and affordability.

If you're experiencing symptoms like a spongey brake pedal, poor brake response, or fluid leakage around the wheels, it may indicate that the wheel cylinders have worn out and need replacing. This replacement part ensures your braking system works efficiently, helping to maintain the safety and performance of your vehicle.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-611-055/TRW – Rear Wheel Cylinder

Description:

Rear wheel cylinder for all Beetles and Karmann Ghias from 8/64 to 7/67. Made by TRW/Varga.

Compatible Vehicles: - Beetle (1965,1966,1967) - Beetle Cabrio (1965,1966,1967) - Buggy/Baja (1965,1966,1967) - Karmann Ghia (1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

131-701-565 – Frame Head Cover

Description:

Inspection cover for the frame head. This allows you to remove the gear rod if required. You will require the seal also which is part number 113-701-571/A /

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-711-741/A – Heater Lever Knob in Red

Description:

Heater control lever knob in red.

For the top of the heater control levers fitted either side of the parking brake.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Karmann Ghia

131-711-741/B /01C – Heater Lever Knob in Black

Description:

Heater control lever knob in black.
For the top of the heater control levers fitted either side of the parking brake.
2 required per vehicle, sold individually.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-721-163 – Brake Pedal Return Spring for Left Hand Drive

Description:

Brake pedal return spring. This part surrounds the pedal mount and latches onto the push rod pin. It is to fit left hand drive models only.

Fits:
- Beetle from chassis number 116851650 (March 1966) onwards.
- Karmann Ghia from chassis number 146851650 (March 1966) onwards.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-721-349/ / – Clutch Cable Wing Nut

Description:

Fits rear end of clutch cable for easy adjustment
Allows tool-free clutch cable tensioning
Matches original style and thread for perfect fit

This wing nut is used at the rear end of the clutch cable to allow quick and easy adjustment of clutch tension. Designed for tool-free operation, it’s ideal for fine-tuning pedal feel and maintaining proper clutch function.

Made to match the original thread and style, it’s a direct replacement for worn or corroded wing nuts—perfect for routine maintenance or restoration projects.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1965,1966,1967) - Type 3 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

131-721-551 – Accelerator Cable Conduit 610mm

Description:

Accelerator cable conduit. The conduit is located between the rear of the floorpan and the fan housing.

Compatible Vehicles: - Beetle (1966,1967,1978,1979) - Beetle Cabrio (1966,1967,1978,1979) - Karmann Ghia (1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-721-551/BQ – Accelerator Roller Throttle Tube

Description:

Accelerator cable conduit. The conduit is located between the rear of the floorpan and the fan housing.

This conduit accelerator cable guide is an updated version. It features a roller at one end meaning the cable runs smoothly. It reduces the dragging feeling of the throttle cable on the edge of the standard guides through the fan shroud.

Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia

131-821-150/ / – Spring Washer M8

Description:

Fits T2, Beetle, and MK1 bumper irons for secure fastening
Ideal for Beetle gear shift base, chassis bolts, and wings
Provides reliable pressure and stability in key VW components

This spring washer is designed for a range of applications across the VW lineup, including T2, Beetle, and MK1 models. It ensures secure and stable connections in essential parts like bumper irons, gear shift bases, and chassis bolts.

Built for durability, this washer helps maintain tight connections, preventing loosening over time. Whether you’re restoring or upgrading your VW, this spring washer offers dependable performance and a perfect fit for your vehicle's critical components.

Additional Vehicle Info: Beetle,Beetle Cabriolet

131-837-597 – Interior Door Handle Escutcheon Silver Beige

Description:

Interior door handle escutcheon finished in a silver grey colour

Compatible Vehicles: - T2 Split Bus (1966,1967)

Additional Vehicle Info: T2 Split

131-845-121/C – Windscreen Seal 1303

Description:

Windscreen seal without trim recess for 1303 models

If your windscreen rubber has seen better days, has started to perish or shrunk at the corners and is letting in water, then don’t delay replace it today with this quality replacement. There is nothing like new rubber to restore that fresh from the factory look!

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

131-915-313 – Battery Securing Clamp

Description:

Essential for securing the battery safely
Fits most 12 Volt aircooled models

This Battery Clamp is a crucial component for safely retaining the battery in your aircooled VW. Designed to ensure your battery stays securely in place, this part is often overlooked or lost during restoration projects, making it an essential replacement for long-term reliability.

Compatible with most 12 Volt aircooled vehicles, this clamp offers peace of mind by preventing battery movement, which can lead to electrical issues or damage, it’s a simple but vital addition to your vehicle's safety.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,Type 3

131-941-159/A – Headlight Bulb Holder for Round Base P45 Bulbs

Description:

Front headlamp bulb holder for P45 style bulbs
Not compatible with H4 bulbs
Sold individually, perfect for classic lighting systems

This front headlamp bulb holder is designed for use with round base P45 style bulbs, providing a secure fit for your vehicle's headlamp assembly. It is not compatible with H4 bulbs, making it ideal for classic and vintage lighting systems.

Sold individually, this bulb holder ensures a reliable connection for your headlamp, helping to maintain proper lighting and visibility. Perfect for replacing worn-out or damaged holders in older vehicles.

Compatible Vehicles: - Beetle (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Type 3 (1968,1969,1970,1971,1972,1973)

Notes:For round base P45 style bulb

Additional Vehicle Info: Beetle,Beetle Cabriolet,Type 3

131-955-543/GY – Wiper Switch Knob and Plunger 4mm Thread in Grey

Description:

Grey knob with central plunger to operate wipers and washer. The knob has a 4mm thread.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Earlier models could have a dealer fitted washer system but 61 model year was the first factory fit.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-955-543/IV – Wiper Switch Knob and Plunger, 4mm Thread, Ivory Coloured

Description:

Grey knob with central plunger to operate wipers and washer. The knob has a 4mm thread.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Earlier models could have a dealer fitted washer system but 61 model year was the first factory fit.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

1311289BB – Oil Filter 2.7 TDV6

Description:

High-Efficiency Filtration: Captures contaminants effectively
Durable Build: Sturdy design withstands high pressure
Perfect Fit: Engineered for Land Rover vehicles

Ensure your Land Rover's engine runs smoothly with this premium oil filter. Designed for Land Rover vehicles, this filter provides exceptional filtration, capturing dirt and debris to protect your engine from damage. The durable construction ensures a long lifespan, making it a reliable choice for regular maintenance.

Notes:Discovery 3 2.7 TDV6,Discovery 4 2.7 TDV6,Range Rover Sport 1 2.7 TDV6

Additional Vehicle Info: Discovery 3 2005-2009,Discovery 4 2010-2016,Range Rover Sport 2005-2009,Range Rover Sport 2010-2013

1311289G – Oil Filter 2.7 TDV6

Description:

High filtration efficiency captures fine engine contaminants
OEM-quality fitment ensures a secure and leak-free seal
Heat-resistant materials withstand high engine temperatures
Protects engine components by maintaining clean oil flow

Replacing the oil filter on your 2.7 TDV6 with a MAHLE unit is essential for maintaining optimal engine health and performance. MAHLE filters are engineered to OEM standards, delivering excellent filtration that traps harmful particles and sludge. This prevents premature engine wear and ensures consistent oil flow throughout the lubrication system. Built to handle high pressure and heat, the MAHLE oil filter helps extend engine life while supporting smoother and more efficient operation.

Compatible Vehicles: - Discovery 3 (2005,2006,2007,2008,2009) - Discovery 4 (2010) - Range Rover Sport 2005-2009 (2005,2006,2007,2008,2009)

Notes:

Discovery 3 2.7 TDV6

Range Rover Sport 2005-2009 2.7 TDV6

Discovery 4 2.7 TDV6

Additional Vehicle Info: Discovery 3 2005-2009,Discovery 4 2010-2016,Range Rover Sport 2005-2009

1311289M – Oil Filter 2.7 TDV6 to (v)6A999999

Description: High-Efficiency Filtration: Captures contaminants effectively Durable Build: Sturdy design withstands high pressure Perfect Fit: Engineered for Land Rover vehicles Ensure your Land Rover's engine runs smoothly with this premium oil filter. Designed for Land Rover vehicles, this filter provides exceptional filtration, capturing dirt and debris to protect your engine from damage. The durable construction ensures a long lifespan, making it a reliable choice for regular maintenance.

Notes:

2.7TDV6 to (v)6A999999

Additional Vehicle Info: Discovery 3 2005-2009,Discovery 4 2010-2016,Range Rover Sport 2005-2009

1311306D – Timing Belt Idler 2.7 TDV6 & 3.0 TDV6

Description:

Designed for high performance in 2.7 TDV6 and 3.0 TDV6 engines
Durable materials resist wear, prolonging engine life
Precision-engineered for consistent tension and reliability
Essential for preventing costly timing belt failures

Dayco Timing Belt Idlers are specifically engineered for the demands of 2.7 TDV6 and 3.0 TDV6 engines, ensuring optimal belt tension, alignment, and smooth operation. With high-quality materials and precise manufacturing, they resist wear and reduce the risk of timing belt failures that could lead to costly repairs. Installing Dayco’s idlers improves reliability, extends the timing belt lifespan, and protects your engine for the long haul.

Compatible Vehicles: - Discovery 3 (2005,2006,2007,2008,2009) - Discovery 4 (2010,2011,2012,2013,2014,2015,2016) - Discovery 5 (2017,2018,2019,2020,2021,2022,2023) - Range Rover 2013-2021 (2013,2014,2015,2016,2017,2018,2019,2020,2021) - Range Rover Sport 2010-2013 (2010,2011,2012,2013) - Range Rover Sport 2014-2023 (2014,2015,2016,2017,2018,2019,2020,2021,2022,2023)

Notes:

Discovery 3 2.7 TDV6

Discovery 4 2.7 TDV6

Range Rover Sport 2005-2009 2.7 TDV6

Discovery 4 3.0 TDV6

Discovery 5 3.0 TDV6

Range Rover Sport 2010-2013 3.0 TDV6

Range Rover Sport 2014-2023 3.0 TDV6

Range Rover L405 3.0 TDV6

Velar 3.0 TDV6

Additional Vehicle Info: Discovery 3 2005-2009,Discovery 4 2010-2016,Discovery 5 2017>,Range Rover 2013-2021,Range Rover Sport 2005-2009,Range Rover Sport 2010-2013,Range Rover Sport 2014-2023,Range Rover Velar 2017 on

132-415-801/E – Tie Rod Right Hand Drive Long Complete

Description:

Complete long tie rod including ends for right hand drive Beetles from August 1961 to July 1965 fitted with a steering damper.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet

132-415-801/E/BARE – Tie Rod Long Bare Right Hand Drive

Description:

Bare long tie rod without ends for right hand drive vehicles fitted with a steering damper.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965) - Karmann Ghia (1961,1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

132-415-801/F – Tie Rod Right Hand Drive Long Complete

Description:

Complete long tie rod including ends for right hand drive Beetles from August 1965 to April 1968.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1965,1966,1967,1968) - Beetle Cabrio (1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet

132-415-801/F/BARE – Tie Rod, Long, 640mm, Right Hand Drive

Description:

Long tie rod, 640mm in length
Includes lock nut and clamp
Compatible with models with steering damper

This 640mm long tie rod comes with a lock nut and clamp, providing secure attachment for your steering setup. It is designed for models that are equipped with a steering damper, ensuring stable handling.

Made for durability, this tie rod helps maintain performance and precision. It’s a reliable replacement or upgrade part for compatible models needing a secure connection.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

132-415-801/G – Tie Rod Right Hand Drive Long Complete

Description:

Complete long tie rod including ends for right hand drive Beetles from May 1968 to 1979.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet

132-415-802/E – Tie Rod Right Hand Drive Short Complete

Description:

Complete short tie rod including ends for right hand drive Beetles fitted with steering damper.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet

132-415-802/E/BARE – Tie Rod, Short, Right Hand Drive

Description:

For right-hand drive with damper
Not for pre-1965 1200 models
Simple, reliable upgrade

This short tie rod is designed for right-hand drive models with a steering damper. It's not compatible with 1200 models made before 1965, so please check your vehicle before purchasing. It offers a simple, reliable solution for owners looking to upgrade their steering system.

Installation is straightforward, ensuring a hassle-free experience for most models that support this feature. Enhance your vehicle's steering performance with this high-quality tie rod.

Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

132-415-802/F – Tie Rod Right Hand Drive Short Complete

Description:

Complete short tie rod including ends for right hand drive Beetles from May 1968 to 1979.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet

132-721-163/ / – Brake Pedal Return Spring for Right Hand Drive

Description:

Brake pedal return spring for right-hand drive models
Fits Beetle and Karmann Ghia from March 1966 onwards
High-quality reproduction part from Forst

This brake pedal return spring is designed specifically for right-hand drive models, fitting Beetles and Karmann Ghias from chassis numbers 116851651 (March 1966) and 146851651 (March 1966) onwards. The spring surrounds the pedal mount and latches onto the push rod pin, ensuring smooth brake pedal operation.

Manufactured by Forst to high-quality standards, this reproduction part restores proper pedal return functionality, helping maintain the performance and reliability of your vehicle's braking system. Ideal for replacing worn or damaged springs in your classic VW.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

133-035-313 – Radio Trim Plate 1303

Description:

Faithful reproduction of original VW DIN radio trim plate
Made from hard plastic with correct grain finish
Ideal for restoring or tidying up DIN sized radio installs

This genuine-style radio trim plate is designed specifically for Volkswagen 1303 models, offering a clean and authentic finish for DIN radio installations. Often missing or cracked, this part is essential for restoring the dashboard to its original look or simply tidying up a modern or period-correct radio fitment.

Made from durable hard plastic with the correct grain-textured fascia. Whether you're restoring a classic or upgrading your sound system, this trim plate adds a professional touch to your VW interior.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-133-511/ / – Fuel Filter for Fuel Injected Air Cooled Engines

Description:

Fuel filter for fuel injected air-cooled engines. 7mm inlet tube, 11mm outlet tube.

Compatible Vehicles: - T2 Bay (1975,1976,1977,1978,1979) - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979) - 914 (1975,1976) - Type 3 (1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Notes:Fits between fuel tank and fuel pump only - not after fuel pump!

Additional Vehicle Info: 914,Beetle,Beetle Cabriolet,T25,T2 Bay,Type 3

133-201-075/F / – Fuel Tank for 1302 & 1303 Carburettor Models

Description:

Fuel tank for 1302 & 1303 models with a carburetted engine.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:This is a modified fuel injection tank. The inside of the fuel filler needs to be filed or ground out slightly to allow clearance for the fuel filler pipe on the vehicle.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-201-075/G – Fuel Tank for Fuel Injected Engines, 1302 & 1303

Description:

Fuel tank for 1302 & 1303 models with fuel injected engine.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-201-179 – Fuel Breather Hose U-Shaped for Fuel Filler Pipe

Description:

U-shaped breather hose for the fuel filler pipe
To fit 1302 and 1303 models only.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-201-181 – Breather Hose L-Shaped for Fuel Filler Pipe 1302

Description:

Breather hose L-shaped for the fuel filler pipe to fit 1302 models only

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-407-151. – Track Control Arm with Ball Joint Left for 1303

Description:

Front track control arm including ball joint to fit the left hand side on 1303 models 1974-1979

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-407-152 – Track Control Arm with Ball Joint Right for 1303

Description:

Front track control arm including ball joint to fit the right hand side on 1303 models 1974-1979

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-407-183 – Track Control Arm Inner Bush for 1302 & 1303

Description:

Precision-fit for VW 1302 & 1303 models
Restores suspension performance
Engineered for a precise fit

This replacement front track control arm inner bush is designed specifically for the lower suspension arm of VW Beetle 1302 and 1303 models. Engineered for a precise fit, it ensures your suspension operates smoothly and maintains the factory ride quality. Sold individually, two bushes are required per vehicle—one for each side.

Manufactured from high-quality Material, this bush offers reliable durability and resistance to wear, helping to eliminate unwanted play and vibration in the front suspension. It's the ideal solution for restoring stability, handling, and overall comfort in your classic VW.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-407-361 – Front Lower Ball Joint for 1303

Description:

Front lower ball joint
To fit 1303 models from chassis number 134-2000-0001 08/1973-1979

Ball joints are an important component of any vehicle’s suspension, when they begin to have problems or fail, the overall handling and ride characteristics of the vehicle are likely to become compromised. For this reason, if you suspect that your vehicle’s ball joints have become severely worn, replace them with these top quality replacements.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-411-315 – Front Anti-Roll Bar Outer Bush 1302 & 1303

Description:

Front anti roll bar outer bush
To fit 1302 and 1303 models from chassis 134 2000 001>> 08/1973-1979

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-411-333 – Clamp for Front Anti-Roll Bar

Description:

Clamp for the front anti-roll bar inner bush for Beetle 1302/1303 and Porsche 924 models.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - 924 (1976,1977,1978)

Additional Vehicle Info: 924,Beetle,Beetle Cabriolet

133-412-031/DA – Front Suspension Strut Insert, 1303, 565-390mm

Description:

Front suspension strut insert, 44mm dia, for 1303 models, Supplied each

For vehicles built 8/75 onwards

Compressed 390mm / Extended 565mm

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979)

Notes:

We recommended replacing shock absorbers in pairs.

Top diameter 44mm

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-412-031/EA – Front Suspension Strut Insert, 1303

Description:

Front suspension strut insert to fit 1303 models
Supplied in singles

Compatible Vehicles: - Beetle (1974,1975) - Beetle Cabrio (1974,1975)

Notes:

We recommended replacing shock absorbers in pairs.

Having a mismatch of dampers on the same axle will have a detrimental effect on a vehicle's handling and safety.

Top diameter 47mm

Fits 08/73-08/75 vehicles

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-412-303/A – Bump Stop For Front Shock Absorber on 1303

Description:

Bump stop for front shock absorber to fit 1303 models
Supplied in singles

To fit 8/73 > Ch 134 2000 001

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-412-345 – Top Mount For Front Strut, 1303

Description:

Top mount to fit front suspension strut on 1303 models from 1973-1979

8/73 > Ch 134 2000 001

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-412-359/ / – Top Mount Cover

Description:

Front top mount cap. Finished in black plastic.

8/73 > Ch 134 2000 001

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976,1977,1978) - Scirocco (1974,1975,1976,1977,1978) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Scirocco

133-412-365 – Spacer Sleeve for Front Suspension Strut Mount

Description:

Spacer sleeve for front suspension strut mount
Supplied in singles 2 required per vehicle

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Scirocco

133-415-801/ / – Adjustable Tie Rod for 1302 & 1303 Models

Description:

Adjustable steering track rod for 1302 & 1303 models up to chassis >>134 2999 000

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974) - Beetle Cabrio (1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-415-951 – Steering Shaft including Universal Joints for 1303 only

Description:

Steering shaft with universal joints to fit 1303 beetle only

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-419-804/A / – Adjustable Tie Rod With Ends 1303

Description:

Complete adjustable tie rod including tie rod ends for 1303 with steering rack.
Can be used on left or right sides as it can replace the non adjustable type if required.

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979) - Beetle USA (1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-513-471 – Hexagon Bolt M12x1.5x50

Description:

Hexagon bolt M12x1.5x50.

To fit Volkswagen:
Mk1 Golf Lower strut lower bolt, 2 required per vehicle
Beetle 1303 Lower strut bolt, 4 required per vehicle

To fit Porsche:
924, 944, 968 Lower strut lower bolt, 2 required per vehicle

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 924,944,968,Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

133-513-471/R – Hexagon Bolt M12x1.5x50

Description:

Additional Vehicle Info: 924,944,968,Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

133-609-721/ / – Handbrake Cable

Description:

Handbrake cable for left or right side
Fits Standard Beetles from 08/1972 and 1303 models from 1973
550mm conduit length, two required per vehicle

This handbrake cable is designed to fit either the left or right side of your vehicle, ensuring reliable operation of your handbrake. It is compatible with Standard Beetles from August 1972 onward and 1303 models from 1973, with a conduit length of 550mm.

From chassis number 113 2000 001 onwards, this durable handbrake cable is an essential replacement part for keeping your vehicle's parking brake system functioning smoothly. Two cables are required per vehicle for full installation.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974) - Trekker (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker

133-611-806 – Brake Fluid Pipe Set for Left Hand Drive 1302/3

Description:

Brake pipe set. This set it a 2 piece set and connects the brake fluid reservoir and the master cylinder, It is to fit left hand drive models only.

To fit
Beetle 1971-1979 1302 and 1303

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-698-000 – Stainless Steel Brake Hose Kit for 1302 and 1303, 4 Piece

Description:

Fits 1302 and 1303 Beetle models
Eliminates spongy pedal feel
TUV Approved quality

Enhance your Beetle’s braking performance with the stainless steel brake hose kit, designed specifically for 1302 and 1303 models. This 4-piece kit features top-quality hoses with a PTFE inner and a stainless over braid covered in a clear outer coating. This advanced construction eliminates spongy pedal feel under demanding conditions, resulting in improved braking efficiency. Additionally, the hoses provide superior resistance to abrasion and corrosion, ensuring long-lasting reliability and safety.

Standard brake hoses made from synthetic rubber can expand significantly under pressure, reducing braking efficiency. Goodridge brake hose kits maintain their integrity even under high stress, reducing stopping distances and enhancing pedal response. Besides performance benefits, these kits add a sleek, polished look to your brake system. With TUV Approval, you can trust in the exceptional quality and durability of these stainless steel brake hose kits for your 1302 and 1303 Beetle.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-698-501 – Steel Brake Pipe Set for Disc Brakes 1302/3

Description:

Brake pipe kit. This is a 9 piece brake pipe kit made from steel. It is for use on 1302 and 1303 models with front disc brakes. The ends can be modified for use with drum brakes.

Requires bending to shape when fitting.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-698-501/C – Copper Nickel Brake Pipe Set for Disc Brakes

Description:

Brake pipe kit. This is a 9 piece brake pipe kit made from copper nickel. It is for use on 1302 and 1303 models with front disc brakes. The ends can be modified for use with drum brakes.

Requires bending to shape when fitting.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-701-037/R – Frame Head Complete, 1302 and 1303

Description:

Precision fit for 1302 & 1303 models only
Essential for front-end stability and safety
Ideal for full restorations or major repairs

This complete front frame head is specifically designed to fit 1302 and 1303 models, providing crucial support for your vehicle’s front-end structure. Engineered for a precise fit, it ensures optimal alignment and stability, making it an essential component for maintaining the integrity of your vehicle's front suspension and steering.

Whether you're tackling a full restoration or addressing significant front-end damage, this frame head offers a durable, high-quality replacement. It’s perfect for ensuring a safe and reliable repair, keeping your vehicle in peak condition.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-701-037/R/1 – Frame Head Complete for 1302 and 1303

Description:

Precision reproduction part for 1303 & 1302 models
Designed for vehicles with McPherson strut front suspension
Top-quality construction for durability and reliable fit
Requires floorpan jigging with old and new frame head during installation

This complete front frame head is a top-quality reproduction part designed specifically for VW 1303 and 1302 models with McPherson strut front suspension. Crafted to meet OEM standards, it ensures a precise fit and provides the structural support needed for your vehicle’s front end.

When installing this frame head, it is essential to jig the floorpan with both the old and new frame head to ensure proper alignment. Perfect for restoration projects or replacing damaged components, this frame head is built to deliver long-lasting durability and maintain the integrity of your vehicle’s suspension system.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-701-131 – Central Chassis Support for 1302 and 1303

Description:

Essential replacement for central chassis support on left-hand drive models
Fits 1302 and 1303
Re-drilling required for right-hand drive versions

This central chassis support frame is a vital replacement panel for the central part of your vehicle’s body. Designed to fit left-hand drive models of the 1302 and 1303, it ensures that the core support structure is restored accurately.

For right-hand drive models, re-drilling will be necessary to ensure proper installation. This replacement frame is crucial for maintaining the overall integrity and safety of your chassis during any restoration or repair work.

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-701-313/A / – Frame Head Bottom Plate, 1302 and 1303

Description:

Durable replacement for frame head
Precision fit for 1302 and 1303 models
Ideal for restorations and repairs

The frame head bottom plate is an essential part of your 1302 or 1303 model, providing structural support and protection to the underside of the vehicle. This high-quality replacement ensures durability and a perfect fit, maintaining the integrity of your car's frame.

Designed for restorations and repairs, this bottom plate is a cost-effective solution for maintaining your vehicle’s longevity. Whether you're restoring a classic or fixing damage, this plate provides the reliable performance needed for a lasting repair.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:This panel comes in a oxidation prohibiting packing paint, this should not be mistaken for primer, the packing paint won't protect the panel well enough against oxidation sufficiently to be used as a final primer. The panel once test fitted, should be stripped down to bare metal, then primed and painted, to protect it against oxidation.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-701-313/A/1 – Frame Head Bottom Plate for 1302 and 1303 JP

Description:

Frame head bottom plate repair panel for 1302 and 1303 models.

This is the repair section for the underneath of the framehead only; an area prone to rust.

This is a high quality repair panel from JP Group Classic.

Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:

Only suitable for 1302 / 1303 models with McPherson Strut front suspension.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-711-717/ / – Heater Cable for 1303

Description:

Heater control cable from heater lever to both heat exchangers for 1303 and Cabrio models.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1967,1968,1969,1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Type 3

133-711-717/B – Heater Cable for US Spec 1303

Description:

Heater cable for US spec model 1303 only.

Compatible Vehicles: - Beetle Cabrio (1975,1976,1977,1978,1979) - Beetle USA (1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-711-717/G – Heater Cable for 1303

Description:

Heater control cable for 1303 Beetles only. Cable goes from heater control to both heat exchangers.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-807-145/ / – Bumper Moulding for US Spec Front Corner

Description:

Front bumper corner moulding for the US spec 1303 bumpers.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-807-345/ /01C – Left Rear Bumper End Cap

Description:

Rear left bumper end cap in satin black for 1303 Beetles.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-807-346/ /01C – Right Rear Bumper End Cap

Description:

Rear right bumper end cap in satin black for 1303 Beetles.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-807-397/ / – Bumper Iron Seal Rear for US Spec

Description:

Bumper iron seal for the rear bumper on the US 1303 Beetle.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-819-663/ / – Fresh Air Control Knob Cap, White Arrows

Description:

Replacement fresh air control knob cap for aircooled VWs
Features white indication arrows for easy visibility
Compatible with a variety of classic VW models

This fresh air control knob cap is a perfect fit for classic aircooled Volkswagen vehicles. Designed to replace worn or missing knobs, it restores both functionality and aesthetic appeal to your vintage VW’s interior. The white indication arrows provide clear visibility, ensuring effortless operation and adjustment of your vehicle's fresh air system.

Crafted to fit a wide range of classic aircooled VW models, this knob cap maintains the original style and charm of your vehicle. Its precise design and quality materials ensure durability, allowing it to withstand regular use while keeping your VW looking as authentic as the day it rolled off the assembly line.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

133-819-663/B – Fresh Air Control Knob Cap, Blue Arrows

Description:

Replacement fresh air control knob cap for aircooled VWs
Features blue indication arrows for easy visibility
Compatible with a variety of classic VW models

This fresh air control knob cap is a perfect fit for classic aircooled Volkswagen vehicles. Designed to replace worn or missing knobs, it restores both functionality and aesthetic appeal to your vintage VW’s interior. The blue indication arrows provide clear visibility, ensuring effortless operation and adjustment of your vehicle's fresh air system.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

133-821-001/ / – Front Chrome Stone Guards For 1302 and 1303 Pair

Description:

Pair of chrome gloss aluminium front stone guards including grey beading strips to fit 1302 and 1303 models only

Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-821-021/R – Wing Front Left US Spec 1303 and 1303 Euro Spec 73-74

Description:

Left front wing with top indicator hole and D-shaped bumper slot
Zinc plated for extra corrosion resistance
Fits Beetle 1303 US spec (1975-1979) and European spec (1973-1974)

This left front wing is the perfect replacement for damaged or rusted wings on your Beetle. Featuring the top indicator hole and D-shaped bumper slot, it's designed primarily for the 1303 US spec models, but also fits European spec models from 1973-1974.

Zinc-plated for additional protection against corrosion, this wing is an excellent choice for mid-budget restorations or repairs. Instead of spending time repairing or filling an old wing, this high-quality replacement part ensures a durable and reliable fix for your vehicle's front end.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Notes:

Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.

Always test fit before preparing and painting, some minor adjustments may be necessary.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-821-021/R/BQ – Wing Front Left US Spec 1303 and 1303 Euro Spec 73-74

Description:

Top quality SSP precision fit left front wing, zinc plated
Features top indicator hole and D-shaped bumper slot
Fits Beetle 1303 US spec (1975-1979) and European spec (1973-1974)

This high-quality SSP precision-fit left front wing is zinc-plated for superior corrosion resistance. It comes with the top indicator hole and D-shaped bumper slot, making it the ideal replacement for damaged or rusted wings on your Beetle.

Designed to fit 1303 Beetles, it is compatible with both US spec (1975-1979) and European spec (1973-1974) models. Whether you’re restoring or repairing your Beetle, this durable wing ensures a secure, reliable fit for a smooth, lasting finish.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Notes:

For US spec models and one-year only European spec models. Beetle 1303 European spec 1973-1974 Beetle 1303 US spec 1975-1979

Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.

Always test fit before preparing and painting, some minor adjustments may be necessary.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-821-022/R – Wing Front Right US Spec 1303 and 1303 Euro Spec 73-74

Description:

Right front wing with top indicator hole and D-shaped bumper slot
Zinc plated for extra corrosion resistance
Fits Beetle 1303 US spec (1975-1979) and European spec (1973-1974)

This right front wing is the perfect replacement for damaged or rusted wings on your Beetle. Featuring the top indicator hole and D-shaped bumper slot, it's designed primarily for the 1303 US spec models, but also fits European spec models from 1973-1974.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Notes:

Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.

Always test fit before preparing and painting, some minor adjustments may be necessary.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-821-022/R/BQ – Wing Front Right US Spec 1303 and 1303 Euro Spec 73-74

Description:

Top quality SSP precision fit right front wing, zinc plated
Features top indicator hole and D-shaped bumper slot
Fits Beetle 1303 US spec (1975-1979) and European spec (1973-1974)

This high-quality SSP precision-fit right front wing is zinc-plated for superior corrosion resistance. It comes with the top indicator hole and D-shaped bumper slot, making it the ideal replacement for damaged or rusted wings on your Beetle.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Notes:

For US spec models and one-year only European spec models. Beetle 1303 European spec 1973-1974 Beetle 1303 US spec 1975-1979

Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.

Always test fit before preparing and painting, some minor adjustments may be necessary.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-821-305 – Wing Rear Left US Spec 1303

Description:

Left rear wing with elephant’s foot lamp recess, and diamond shaped bumper slot.

Probably one of the more common areas on a beetle to rust or to be accident damaged is the rear wings. If you have damaged wing or it has rusted through then this is an ideal replacement instead of spending time, repairing, filling, and making good an old wing; in addition it is zinc plated for extra protection against corrosion. Being a good quality labelled product it is ideal for a mid-budget restoration or repair.

To fit
Beetle 1303 US spec 1975-1979

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979)

Notes:Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.
Always test fit before preparing and painting, some minor adjustments may be necessary.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-821-306/A – Wing Rear Right USA Specification 1303

Description:

Right rear wing with elephant’s foot lamp recess, and diamond shaped bumper slot.

Probably one of the more common areas on a beetle to rust or to be accident damaged is the rear wings. If you have damaged wing or it has rusted through then this is an ideal replacement instead of spending time, repairing, filling, and making good an old wing; in addition it is zinc plated for extra protection against corrosion. Being a good quality labelled product it is ideal for a mid-budget restoration or repair.

To fit
Beetle 1303 US spec 1975-1979

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979)

Notes:

Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.

Always test fit before preparing and painting, some minor adjustments may be necessary.

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-823-031/AR – Bonnet for 1303 Only

Description:

Includes mounting holes for bonnet handle and chrome trim
High-quality reproduction for precise fit and finish
Economical solution for rust or damage to ensure safety and longevity

This Bonnet is specifically designed for the 1303 model, featuring pre-drilled holes for both the bonnet handle and chrome trim. It’s a high-quality reproduction part, ensuring a precise fit and excellent finish that matches the original specifications.

If your current bonnet is rusty or damaged, it’s crucial to replace it promptly. Rust can significantly weaken the metal, compromising your vehicle’s safety and longevity. By installing this new bonnet, you ensure both structural integrity and a refreshed appearance for your vehicle.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Notes:

Although every care is taken to ensure panels arrive in perfect condition unfortunately there may be slight imperfections due to handling in transit and storage.

Always test fit before preparing and painting, some minor adjustments may be necessary.

Once test fitted, it should be stripped down to bare metal, then primed and painted, to protect it against corrosion

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-823-320 – Bonnet Hinge Dampers Including Fixings for 1303 Models

Description:

Pair of Bonnet hinge dampers including fixings for the 1303 models only

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-823-717/ / – Securing Clip for Bonnet or Door Seal

Description:

Fits Beetle 1303 bonnet seal (x6 needed)
Compatible with Mk1 Golf door seal
Strong hold for long-lasting seal integrity

This securing clip is essential for attaching bonnet or door seals, depending on your vehicle model. It’s a perfect fit for the Beetle 1303 bonnet seal—requiring six clips for full installation—and also suits Mk1 Golf door seals. Built for durability and ease of use, it ensures a tight, weather-resistant seal.

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Karmann Ghia

133-823-731/ / – Bonnet Seal 1303

Description:

Specifically designed for 1303 models
Provides a tight, secure bonnet closure
German manufactured

This bonnet seal is custom-made to fit 1303 models, offering a perfect, secure fit that ensures your bonnet closes tightly. Its durable construction protects your engine bay from dust, moisture, and debris, maintaining the longevity and performance of your vehicle.

Ideal for both restoration projects and regular maintenance, this seal is essential for keeping your 1303 model in peak condition while preserving its original quality and protection.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-845-101 – Windscreen, Clear, 1303

Description:

Clear, non-tinted laminated design
Fits 1303 Beetles made from 1973 to 1979
Not compatible with 1303 Cabriolets

Upgrade your 1303 Beetle with this clear, non-tinted laminated reproduction windscreen. Designed specifically for models manufactured between 1973 and 1979, it offers a perfect fit and enhances visibility.

Please note that this windscreen is not suitable for 1303 Cabriolets. Ensure your Beetle retains its classic look and feel while providing the durability and safety you need on the road.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

133-853-265/ / – Deluxe Front Quarter Trim Piece for the Left Side 1303

Description:

Exterior front quarter trim for the left side. This trim is finished in bright anodised aluminium. To fit 1303 only

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-853-266 – Deluxe Front Quarter Trim Piece for the Right Side 1303

Description:

Exterior front quarter trim for the right side. This trim is finished in bright anodised aluminium. To fit 1303 only

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-853-823 – Bonnet Grille Trim 1303

Description:

Bonnet vent grill trim in chrome for 1303

Compatible Vehicles: - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

133-857-119 – Retaining Clip for the Glove Box Mechanism

Description:

Retaining clip for the glove box lock mechanism. Supplied each.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: 924,944,Beetle,T25