211-698-069/C/KIT – Brake Drum Overhaul Kit, Front
Description:
- Complete front brake drum overhaul kit
- Includes essential brake components
- Saves time and money on repairs
The front brake drum overhaul kit provides everything you need to refresh and restore your vehicle's front brakes. This comprehensive kit includes brake shoes, four wheel cylinders, wheel bearings, brake pipes, and hub seals to ensure a complete overhaul.
With high-quality parts like star adjusters, brake hoses, bleed nipples, and a brake shoe fitting kit, this kit saves time and money on sourcing individual components. Heritage kits offer reliable, efficient solutions for budget-friendly and lasting brake repairs.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967) - T2 Split USA (1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-698-069/R/KIT – Drum Brake Overhaul Kit, Front
Description:
- Complete front brake drum overhaul kit
- Includes essential brake components
- Saves time and money on repairs
The front brake drum overhaul kit provides everything you need to refresh and restore your vehicle's front brakes. This comprehensive kit includes brake shoes, four wheel cylinders, wheel bearings, brake pipes, and hub seals to ensure a complete overhaul.
With high-quality parts like star adjusters, brake hoses, bleed nipples, and a brake shoe fitting kit, this kit saves time and money on sourcing individual components. Heritage kits offer reliable, efficient solutions for budget-friendly and lasting brake repairs.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-698-151 Kit – Brake Pad Fitting Kit
Description:
Brake pad fitting kit
70-72 has shorter pins
Pins are 70mm total
Compatible Vehicles: - T2 Bay (1971,1972)
Additional Vehicle Info: T2 Bay
211-698-151/ADKit – Brake Pad Fitting Kit for ATE or Varga Calipers
Description:
- Compatible with ATE and Varga calipers for a precise fit
- Includes pins (78mm) and springs for both caliper types
- Ensures secure brake pad installation and retention
This brake pad fitting kit is designed for use with ATE and Varga calipers, offering everything you need for a smooth brake pad replacement. The kit includes two 78mm pins and the necessary springs, ensuring proper fitment and retention for both caliper types.
With these high-quality components, you can be confident in the security and reliability of your brake system. Whether you're performing regular maintenance or replacing old parts, this kit makes installation straightforward and ensures optimal braking performance.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987)
Additional Vehicle Info: T25,T2 Bay
211-698-151/FF – Brake Pad Set, Front for ATE Calipers
Description:
Another quality affordable product from FORST, Front brake pads for ATE calipers.
To fit Baywindow from chassis 211 2000 001 to 212 2300 000 (08/1970-07/1972)
Compatible Vehicles: - T2 Bay (1971,1972) - Baywindow USA (1971,1972)
Additional Vehicle Info: T2 Bay
211-698-237/BF – Brake Shoe Set 50mm, Front
Description:
Another quality affordable product from FORST, Front brake shoe set. 50mm - Front
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-698-237/DF – Brake Shoe Set, 55mm, Front
Description:
- Affordable replacement brake shoes
- Designed for reliable braking performance
- Easy to install and maintain
FORST offers this budget-friendly front brake shoe set, measuring 55mm, to ensure your vehicle's braking system remains efficient and safe. These high-quality replacement shoes provide dependable stopping power at a cost-effective price.
Perfect for maintaining your vehicle’s braking performance, this set is designed for easy installation and long-lasting durability. Choose FORST for reliable and affordable brake solutions that keep your vehicle performing at its best.
Compatible Vehicles: - T2 Bay (1968,1969,1970) - T2 Split Bus (1964,1965,1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
211-698-471/C – Brake Caliper Repair Kit
Description:
Front brake caliper repair kit for ATE calipers, includes piston O-rings, piston seals and bleed nipple cap.
To fit Baywindow up to chassis >>212 2300 000 (to >>07/1972)
Compatible Vehicles: - T2 Bay (1971,1972)
Notes:One kit overhauls one caliper
Additional Vehicle Info: T2 Bay
211-698-485 – Brake Servo Repair Kit
Description:
- Compatible with VW T2 Bay Window 1974–1979
- Restores brake servo performance
- Includes seals, diaphragms & essential components
Keep your braking system in top condition with this comprehensive Brake Servo Repair Kit, designed specifically for VW T2 models from 1974 to 1979. Ideal for restoring vacuum-assisted braking performance, this kit includes all the critical components needed to refurbish your original servo unit.
Each part is manufactured to meet or exceed OEM standards, ensuring a reliable fit and long-lasting durability. Whether you're tackling a full restoration or addressing a specific issue, this kit is a cost-effective solution to bring your classic T2’s braking system back to life
Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-698-500 – Wheel Trim Set in Stainless Steel for 14'' Wheels
Description: Stainless steel wheel trim beauty rings to fit 14'' standard steel wheels.
Supplied in sets of 4
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Additional Vehicle Info: T25,T2 Bay,T2 Split
211-698-501 – Brake Line kit 10 Piece
Description:
9 Piece brake line kit made from quality steel supplied in pre cut lengths with brake unions.
Compatible Vehicles: - T2 Bay (1968,1969)
Notes:Requires bending to shapePositions:1: From master to front right 2: From master to front left 3: From cylinder to rear T peice 4\/5: From rear T to right rear cylinder6: From rear T to rear left
Additional Vehicle Info: T2 Bay
211-698-502 – Steel Brake Line kit 10 Piece
Description:
10 Piece brake line kit made from quality steel with plastic coating.
Supplied in pre-cut lengths with brake unions, each pipe is labelled for easy location fitment
Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Requires bending to fit
Additional Vehicle Info: T2 Bay
211-698-502/C – Brake Pipe Set, Copper Nickel, 10 Piece
Description:
- Copper/Nickel construction for durability
- Includes all front-to-rear pipes, excluding master cylinder pipes
- Custom bending needed for perfect fit
Restore your vehicle's braking system with this high-quality ten-piece brake pipe set. Made from robust copper/nickel, these pipes ensure long-lasting performance and resistance to corrosion. The set includes all necessary brake pipes from the front to the rear of your vehicle, but please note that it does not include the two pipes from the master cylinder.
For proper installation, some bending will be required to fit the pipes to your specific vehicle configuration. This set provides a reliable and comprehensive solution to replace your existing brake pipes and enhance your vehicle's safety and performance.
Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Requires bending to fit
Additional Vehicle Info: T2 Bay
211-698-505/B – Brake Pipe Set In Copper Nickel for LHD
Description:
Single circuit copper nickel brake line kit for left hand drive models
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-698-505/C – Brake Pipe Kit In Steel
Description:
Complete brake hose kit. This kit is to replace your old metal brake lines. Comes with pre cut lengths with fitted unions, does require bending to shape. For use with Single Circuit systems only.
Compatible Vehicles: - T2 Split Bus (1964,1965,1966)
Additional Vehicle Info: T2 Split
211-698-505/D – Brake Pipe Kit In Steel
Description:
Complete brake hose kit. This kit is to replace your old metal brake lines. Comes with pre cut lengths with fitted brake unions, but does require bending to shape. For use with Dual brake circuit systems only.
Compatible Vehicles: - T2 Split Bus (1967)
Additional Vehicle Info: T2 Split
211-698-533/BF – Brake Shoe Set, Rear
Description:
Another quality affordable product from FORST, Rear brake shoe set
55mm wide
Compatible Vehicles: - T2 Bay (1971,1972) - Baywindow USA (1971,1972)
Notes:
Vehicle fitment Baywindow 08/1971-12/1972
Additional Vehicle Info: T2 Bay
211-698-537/BF – Brake Shoe Set 40mm, Rear
Description:
Another quality affordable product from FORST, Rear brake shoe set 40mm
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Additional Vehicle Info: T2 Split
211-698-537/CF – Brake Shoe Set, 45mm, Rear
Description:
- Affordable replacement brake shoes
- Designed for reliable braking performance
- Easy to install and maintain
FORST offers this budget-friendly rear brake shoe set, measuring 45mm, to ensure your vehicle's braking system remains efficient and safe. These high-quality replacement shoes provide dependable stopping power at a cost-effective price.
Perfect for maintaining your vehicle’s braking performance, this set is designed for easy installation and long-lasting durability. Choose FORST for reliable and affordable brake solutions that keep your vehicle performing at its best.
Compatible Vehicles: - T2 Bay (1968,1969,1970) - T2 Split Bus (1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
211-698-537/J – Brake Shoe Set, Rear 55mm
Description:
Another quality affordable product from FORST, Brake shoe set rear to fit Baywindow 08/1970-07/1971
Compatible Vehicles: - T2 Bay (1970,1971)
Notes:Baywindow 08/1970-07/1971
Additional Vehicle Info: T2 Bay
211-698-537/SF – Brake Shoe Set, 55mm, Rear
Description:
- Affordable replacement brake shoes
- Designed for reliable braking performance
- Easy to install and maintain
FORST offers this budget-friendly rear brake shoe set, measuring 55mm, to ensure your vehicle's braking system remains efficient and safe. These high-quality replacement shoes provide dependable stopping power at a cost-effective price.
Perfect for maintaining your vehicle’s braking performance, this set is designed for easy installation and long-lasting durability. Choose FORST for reliable and affordable brake solutions that keep your vehicle performing at its best.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014)
Additional Vehicle Info: Brazil Kombi,T2 Bay
211-698-550 – Drum Brake Overhaul Kit, Front
Description:
- Complete kit for front brake overhaul
- High-quality components for lasting repairs
- Saves time and money on replacements
The Front Drum Brake Overhaul Kit includes everything you need to restore your braking system efficiently. With brake shoes, four wheel cylinders, wheel bearings, brake pipes, a brake shoe fitting kit, adjusting stars, and screws, this comprehensive kit is designed to simplify the repair process.
Heritage kits provide a cost-effective solution, helping you save both time and money on essential replacements. Ensure reliable braking performance with this all-in-one kit, ideal for restoring safety and functionality to your vehicle.
Compatible Vehicles: - T2 Bay (1968,1969,1970)
Additional Vehicle Info: T2 Bay
211-698-551 – Brake Overhaul Kit, Front Disc
Description:
- Complete front disc brake overhaul kit
- Includes brake discs, hoses, pads & fitting kit
- Heritage kits save time and money
Restore your vehicle’s braking performance with our comprehensive front disc brake overhaul kit. This all-in-one solution includes two high-quality brake discs, two durable brake hoses, a full set of brake pads, and the essential brake pad fitting kit. Engineered for precision and reliability, this kit ensures a smooth and safe driving experience.
Heritage kits are designed to streamline your maintenance process, saving you both time and money. By providing all necessary components in one package, this kit eliminates the need for separate purchases and simplifies the installation process, making it an efficient choice for any vehicle owner.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-698-552 – Disc Brake Overhaul Kit, Front
Description:
- Complete front disc brake rebuild kit
- Fits Baywindow 1970-72 with early calipers
- Quality parts for reliable braking performance
This front disc brake overhaul kit is tailored for Baywindow models from 1970-1972, featuring early calipers up to chassis number 212 2300 000. The kit includes everything you need for a comprehensive brake update: two brake discs, brake pads, pad fitting kit, disc retaining screws, caliper rebuild kits, upper and lower mounting bolts, and brake hoses.
Heritage kits are designed to save time and money, offering high-quality, perfectly matched components for reliable performance. Ideal for those wanting to restore their vehicle's braking system to top condition, this kit ensures safe, smooth, and efficient braking.
Compatible Vehicles: - T2 Bay (1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-698-599/A – Rear Drum Brake Overhaul Kit
Description:
This HERITAGE Rear drum brake overhaul kit
For Baywindow will stop as good as it did when it left the factory! Everything is included in one convenient, affordable kit.
Kit contents
Brake shoes
Brake shoe fitting kit
Wheel cylinders x2
Adjusting stars and screws
Compatible Vehicles: - T2 Bay (1968,1969,1970)
Additional Vehicle Info: T2 Bay
211-698-600/E – Brake Overhaul Kit, Rear Drum Brakes
Description:
- Complete set for standard drum brakes
- Includes drums, shoes, cylinders, and more
- Time-saving and cost-effective Heritage kit
Restore your vehicle's braking system with our Rear Drum Brake Overhaul Kit. This comprehensive kit is designed for standard drum brakes and includes everything you need: brake drums, shoes, wheel cylinders, adjusting screws, and adjusting stars. Each component is crafted to meet high-quality standards, ensuring reliable performance and safety.
Our Heritage kits are engineered to save you both time and money. With all necessary parts included, you can streamline your brake maintenance and avoid the hassle of sourcing individual components. Trust in our kit to provide a convenient and effective solution for your brake system needs.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-698-700 – Brake Master Cylinder Conversion Kit, Dual Circuit
Description:
- Improves braking efficiency and safety
- Includes all necessary components for installation
- Perfect upgrade for modern performance needs
Enhance your vehicle's braking system with our dual circuit brake master cylinder conversion kit. This complete kit includes a dual circuit master cylinder, billet adaptor, master cylinder boot, bolts, washers, nuts, and a brake fluid reservoir, providing everything you need for a seamless upgrade.
Designed to improve braking efficiency, this kit ensures your vehicle is better equipped for modern road conditions. It’s an ideal solution for upgrading your Beetle's braking system to meet today’s safety and performance standards. For installation, please refer to the fitting instructions provided.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:For upto 1966 and 1967 euro spec non servo brakes with a dual master cylinder: The rear brake line and brake light switch are fitted to the front two ports closest to the push rod. You should have two front brake lines, one to each of the left and right front brakes. These fit to the two rear ports on the dual circuit cylinder. For 1967 US buses non servo brakes with a dual master cylinder: The rear line is fitted to one of the front ports closest to the pushrod. The front line is fitted to one of the rear ports. There are 2 brake light switches one in the front port and one in the rear port. Check the rod that goes into the master cylinder from the pedal. It should have an 1\/8 inch of play before, you can feel the rod make contact with the plunger If there is no play - the plunger will not come back far enough to let the fluid into the cylinder - If it has too much play you will be pushing the pedal down a long way before the master cylinder even does anything. To adjust undo the jam nut on the pushrod and change the length, then do the nut back up. PLEASE NOTE IF YOU HAVE AN ORIGINAL PEDAL PAN THIS WILL NO LONGER FIT DUE TO THE EXTRA LENGTH OF THE NEW MASTER CYLINDER.
Additional Vehicle Info: T2 Split
211-698-750 – Brake Reservoir Kit for System without Brake Servo
Description:
This HERITAGE Brake reservoir kit, to fit vehicles without brake servo
An ideal kit for overhauling the brake fluid supply system in one go instead of replacing worn parts individually, thus saving time and money.
Kit Contents
Upper brake reservoir 211-611-309
Lower brake reservoir 211-611-313/G
Feed pipe 211-611-805/E
Feed pipe grommets x2 211-611-833/D
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-698-751 – Brake Reservoir Kit for Systems with Brake Servo
Description:
This HERITAGE Brake reservoir kit, Is to fit vehicles with brake servo
An ideal kit for overhauling the brake fluid supply system in one go instead of replacing worn parts individually, thus saving time and money.
Kit Contents
Upper brake reservoir 211-611-309
Lower brake reservoir 211-611-313/H
Feed pipe 211-611-805/E
Feed pipe grommets x2 211-611-833/D
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972) - Baywindow USA (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-701-115/AC – Front Chassis Outrigger Including Jacking Point Left
Description:
- Front left chassis outrigger with pre-welded jacking point
- Made to original specifications with 0.5mm tolerance
- Ensures perfect fitment for chassis and inner sills alignment
- Provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild and restoration
This front left chassis outrigger, including the jacking point, is made to original specifications for superior quality and fitment. Professionally welded together on a special jig, it offers a 0.5mm tolerance, ensuring an exact fit every time.
Ideal for restoration projects where the original parts are missing or damaged, this outrigger provides the accuracy needed to line up your chassis and inner sills perfectly. Trust in its quality and precision for a reliable, long-lasting repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-701-116/AC – Front Chassis Outrigger including Jacking Point Right
Description:
- Front right chassis outrigger with pre-welded jacking point
- Made to original specifications with 0.5mm tolerance
- Ensures perfect fitment for chassis and inner sills alignment
This front right chassis outrigger, including the jacking point, is made to original specifications for superior quality and fitment. Professionally welded together on a special jig, it offers a 0.5mm tolerance, ensuring an exact fit every time.
Ideal for restoration projects where the original parts are missing or damaged, this outrigger provides the accuracy needed to line up your chassis and inner sills perfectly. Trust in its quality and precision for a reliable, long-lasting repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-023/A – Front Chassis Section Left Complete
Description:
Complete outer front chassis half, from the very front back to the factory weld join in the centre.
Comes with the bolt holes for the front beam to attach.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Split -67
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-024/A – Front Chassis Section Right Complete
Description:
Complete outer front chassis half, from the very front back to the factory weld join in the centre.
Comes with the bolt holes for the front beam to attach.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-025 – Chassis Repair Section for Front Left
Description:
Front chassis member repair section to fit the left hand side .
This is the front end of the main chassis rail where it angles off towards the front of the bus.
Made 2mm mild steel, laser cut, then CNC folded for consistent accuracy. Includes front end returns to weld to the inner front valance.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Suits left or right hand drive vehicle
Additional Vehicle Info: T2 Bay
211-703-026 – Chassis Repair Section for Front Right
Description:
Front chassis member repair section to fit the right hand side .
This is the front end of the main chassis rail where it angles off towards the front of the bus.
Made 2mm mild steel, laser cut, then CNC folded for consistent accuracy. Includes front end returns to weld to the inner front valance.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Suits left or right hand drive vehicle
Additional Vehicle Info: T2 Bay
211-703-029/C – Front Cross Member for Left Hand Drive
Description:
Cross member front Splitscreen left hand drive 3/55-67 in front of axle
This is the cross member the master cylinder mounts to.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-045/A – Chassis Reinforcement Middle Front
Description:
Middle front chassis reinforcement.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-055 – Engine Cradle Kit
Description:
3 piece engine cradle kit for all Splitscreen models from 55-67.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-070 – Front Panel Assembly Complete Inner LHD
Description:
- All-in-one design with pre-welded components
- Finished in silver weld-through primer for easy installation
- Includes inner front valance, headlight bucket support, and dash support
- Perfect fit ensures minimal adjustments during fitting
Upgrade your vehicle’s front structure with the Complete Inner Front Panel Assembly, a high-quality SSP product designed for ease and efficiency. This assembly combines the inner front valance, headlight bucket support panel, dash support panel, and both A-pillars, all pre-welded for a straightforward installation process.
Finished in silver weld-through primer, this panel eliminates the need for additional prep time typically required with painted panels. Simply align, clamp, and weld for a secure fit. With its superior construction and perfect fit, this assembly not only saves you time but also enhances the overall integrity and appearance of your vehicle’s front end.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Notes:For left hand drive Splitscreen models from 1959 to 1963. This panel will fit 1955 to 1958 models but has the longer bumper iron slots for the 59-63 models. Can be modified for right hand drive by moving the steering box mount.
Additional Vehicle Info: T2 Split
211-703-070/A – Complete Front Panel Assembly, Inner LHD
Description:
- Includes inner front valance, headlight bucket, and more
- Top-quality SSP panel for best fit
- Finished in silver weld-through primer
Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966,1967)
Notes:
For left hand drive Splitscreen models from 1963-67. Can be modified for right hand drive by moving the steering box mount.
From Chassis 1 222 026>>
Additional Vehicle Info: T2 Split
211-703-071/B – Inner Front Valance Left Hand Drive
Description:
Front lower inner panel with larger bumper iron slots as per 58-67 models. This is a left hand drive panel but can easily be modified for right hand drive.
Compatible Vehicles: - T2 Split Bus (1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Move steering box bracket for right hand drive.
Additional Vehicle Info: T2 Split
211-703-071/B/BQ – Inner Front Valance, Left Hand Drive, Best Quality
Description:
Inner front valance with the larger bumper iron slots as per the 1958 to 1967 model. For left hand drive Splitscreen models although can be modified for right hand drive by moving the steering box bracket.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:For left hand drive 1959 to 1967 Splitscreen models with the larger bumper iron slots. Can be modified for right hand drive by moving the steering box bracket.
Additional Vehicle Info: T2 Split
211-703-071/B/GEN – Front panel lower, inner 50-67 Genuine
Description:
Front lower inner panel with larger bumper iron slots as per 58-67 models.
LHD panel but easy mod for RHD
211-703-071/G – Inner Front Valance including Chassis Brackets
Description:
Inner front valance including chassis brackets made from 1.2mm mild steel
Probably one of the more common areas on a Baywindow to rust or to be accident damaged is the front valance. If your front valance has succumbed to any of these then this replacement is ideal to get your bus back on the road, and being that it as a top quality labelled product it is suitable for those looking to carry out a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-703-073/A – Front Outer Lower Panel
Description:
Lower outer front panel (Front valance)
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-101 – Rear Chassis Leg Half Left
Description:
Full chassis rail left from the rear end up to the factory weld.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Fits Splitscreen from 50-67
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-102 – Rear Chassis Leg Half Right
Description:
Full chassis rail right from the rear end up to the factory weld.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Fits Splitscreen from 50-67
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-115/AC – Front Jacking Point Left
Description:
Jacking point for the front left hand side.
One of the more common areas to rust on a Baywindow is the outriggers, specifically the outer jacking points. This hand crafted UK made replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-115/RA – Front Left or Right Outrigger
Description:
Front left or right hand side outrigger.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-116/AC – Front Jacking Point Right
Description:
- Front right chassis outrigger with pre-welded jacking point
- Made in the UK to original specifications with 0.5mm tolerance
- Ensures perfect fitment for chassis and inner sills alignment
- Provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild and restoration
This front right chassis outrigger, including the jacking point, is made in the UK to original specifications for superior quality and fitment. Professionally welded together on a special jig, it offers a 0.5mm tolerance, ensuring an exact fit every time.
Ideal for restoration projects where the original parts are missing or damaged, this outrigger provides the accuracy needed to line up your chassis and inner sills perfectly. Trust in its quality and precision for a reliable, long-lasting repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-119/AC – Rear Outrigger & Jacking Point Left
Description:
- Rear left chassis outrigger with pre-welded jacking point
- Welded on a jig with 0.5mm tolerance for precise fitment
- Suitable for models with 2 or 3 outriggers per side
- Provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild and restoration
This chassis outrigger, complete with a jacking point, is designed to fit the rear left side and is pre-welded for a high-quality finish. Professionally welded on a special jig, it ensures a perfect fit with a 0.5mm tolerance, making it ideal for accurate alignment of your chassis and inner sills.
If your vehicle is from 1976 onward, this part serves as the rear outrigger for models with two outriggers per side or the centre one for those with three. It’s a reliable solution, especially when original parts are missing.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-119/ARC – Chassis Outrigger Centre Left
Description:
Chassis outrigger for the centre left hand side jacking point
One of the more common areas to rust on a Baywindow is the chassis outriggers. This handcrafted replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Attaches to the jacking point and then onto the chassis
Additional Vehicle Info: T2 Bay
211-703-120/AC – Rear Outrigger & Jacking Point Right
Description:
- Rear right chassis outrigger with pre-welded jacking point
- Welded on a jig with 0.5mm tolerance for precise fitment
- Suitable for models with 2 or 3 outriggers per side
- Provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild and restoration
This chassis outrigger, complete with a jacking point, is designed to fit the rear right side and is pre-welded for a high-quality finish. Professionally welded on a special jig, it ensures a perfect fit with a 0.5mm tolerance, making it ideal for accurate alignment of your chassis and inner sills.
If your vehicle is from 1976 onward, this part serves as the rear outrigger for models with two outriggers per side or the centre one for those with three. It’s a reliable solution, especially when original parts are missing.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-120/ARC – Chassis Outrigger Centre Right
Description:
Chassis outrigger for the centre right hand side jacking point
One of the more common areas to rust on a Baywindow is the chassis outriggers. This handcrafted replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Attaches to the jacking point and then onto the chassis
Additional Vehicle Info: T2 Bay
211-703-121/AC – Rear Jacking Point Left
Description:
Jacking point for the rear left hand side.
One of the more common areas to rust on a Baywindow is the outriggers, specifically the outer jacking points. This hand crafted UK made replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-122/AC – Rear Jacking Point Right
Description:
Jacking point for the rear right hand side.
One of the more common areas to rust on a Baywindow is the outriggers, specifically the outer jacking points. This hand crafted UK made replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-122/AR – Rear Jacking Point Right
Description:
Rear right hand side jacking point.
211-703-125/A – Chassis Outrigger Front Left or Right
Description:
Front left or right chassis outrigger. Sold individually.
Fits between main chassis rail and front jacking point, below top hat section.
Laser cut and CNC folded from 1.2 mild steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Suitable for all years, 50-67
Additional Vehicle Info: T2 Split
211-703-131/A – Chassis Outrigger Middle Left
Description:
Middle left chassis outrigger.
Fits between main chassis rail and rear jacking point, below top hat section.
Laser cut and CNC folded from 1.2 mild steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Suitable for all years, 50-67.
Additional Vehicle Info: T2 Split
211-703-132/A – Chassis Outrigger Middle Right
Description:
Middle right chassis outrigger.
Fits between main chassis rail and rear jacking point, below top hat section.
Laser cut and CNC folded from 1.2 mild steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Suitable for all years, 50-67.
Additional Vehicle Info: T2 Split
211-703-135/A – Rear Left Chassis Outrigger
Description:
Rear outrigger, left. 3rd outrigger fitted to 50-59 vehicles only. Fits between main chassis rail and inner sill, below partially enclosed top hat section. Laser cut and CNC folded from 1.2 mild steel. Suitable for 50-59
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959)
Additional Vehicle Info: T2 Split
211-703-136/A – Rear Right Chassis Outrigger
Description:
Rear outrigger, right. 3rd outrigger fitted to 50-59 vehicles only. Fits between main chassis rail and inner sill, below partially enclosed top hat section. Laser cut and CNC folded from 1.2 mild steel. Suitable for 50-59
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959)
Additional Vehicle Info: T2 Split
211-703-163/AC – Chassis Outrigger Rear Left
Description:
Chassis outrigger for the rear left hand side
One of the more common areas to rust on a Baywindow is the chassis outriggers. This handcrafted replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Attaches to main chassis next to the centre outrigger that has the jacking point
Additional Vehicle Info: T2 Bay
211-703-164/AC – Chassis Outrigger Rear Right
Description:
Chassis outrigger for the rear right hand side
One of the more common areas to rust on a Baywindow is the chassis outriggers. This handcrafted replacement contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Attaches to main chassis next to the centre outrigger that has the jacking point
Additional Vehicle Info: T2 Bay
211-703-171/A – Rear Shock Absorber Mount Brackets Pair
Description:
Original style shock mount for use with straight axle conversions or replacements for damaged or lost mounts. Laser cut and formed in 4mm steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-200 – Main Chassis Rail 830mm
Description:
A straight section of main chassis rail to make repairing or replacing rot that much simpler - suitable for left or right. Laser cut and CNC folded for consistently accurate panels.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-203 – Centre Chassis Rail Repair
Description:
Chassis rail repair section
One of the more common areas to rust on a Split or Bay is the chassis rails. This handcrafted repair section contours the body perfectly, and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end rebuild, or restoration.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Locates upward towards the front axle\/rear torsion housing on Bay.
Additional Vehicle Info: T2 Bay,T2 Split
211-703-305/A – Chassis Leg Front Inner Left
Description:
Front left inner chassis leg.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-306/A – Chassis Leg Front Inner Right
Description:
Front right inner chassis leg.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
No time consuming surface preparation is required with silver primer prior to welding.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-389/BR – Front Centre Crossmember
Description:
Front chassis centre crossmember.
One of the more common areas to rust on a Baywindow is the front chassis crossmember located between the chassis rails. This replacement contours to the line of the body seamlessly to ensure a good fitment, ideal for a mid-budget rebuild or restoration repair.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-391/A – Front Centre Crossmember
Description:
Front chassis section between main chassis rails inline with outriggers. Includes all correct holes for heater tube and cable tubing. Laser cut and CNC folded in 1.2mm steel. Fits all years 55-67
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-391/B – Front Centre Crossmember
Description:
Centre front cross member, fits between the chassis rails across the van in between the front outriggers behind the front axle.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-391/C – Front Centre Crossmember
Description:
Front centre crossmember, includes all correct factory holes for cable conduit, heater tube, wiring etc.
One of the more common areas to rust on a Baywindow is the front chassis crossmember located between the chassis rails. This handcrafted replacement contours the body perfectly and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970)
Additional Vehicle Info: T2 Bay
211-703-471/MR – Rear Centre Crossmember
Description:
Rear centre crossmember to fit Baywindow 1968-1971 with round bumpers and small rear lights
One of the more common areas to rust on a Baywindow is the rear chassis crossmember located between the chassis rails. This handcrafted replacement contours the body perfectly and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-703-471/NR – Rear Centre Crossmember
Description:
Rear centre crossmember
One of the more common areas to rust on a Baywindow is the rear chassis crossmember located in front of the torsion tubes between the chassis rails. This handcrafted replacement contours the body perfectly and provides a seam equal to that of the original, being a top quality labelled part it is ideal for a high-end restoration or repair.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-475/A – Rear Centre Crossmember
Description:
Rear chassis section between main chassis rails inline with outriggers. Includes all correct holes for heater tube and cable tubing. Laser cut and CNC folded in 1.2mm steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-475/CR – Rear Centre Crossmember
Description: Rear centre crossmember
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-479 – Chassis Rail Repair End Rear Left
Description:
Chassis rail repair end for the left hand side rear
This is the rear most part of the main chassis rail, correct for all Baywindow with tall rear lights, exact copy of the original part, includes engine hanger bar mounting points, sleeved for extra strength just like the original, also includes bumper hanger points.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-480 – Chassis Rail Repair End Rear Right
Description:
Chassis rail repair end for the right hand side rear
This is the rear most part of the main chassis rail, correct for all Baywindow with tall rear lights, exact copy of the original part, includes engine hanger bar mounting points, sleeved for extra strength just like the original, also includes bumper hanger points.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-703-491/B – Inner Rear Valance
Description:
Inner rear valance
Probably one of the more common areas on a Baywindow to rust or to be accident damaged is the rear valence/crossmember. If your rear valance has succumbed to any of these then this replacement is ideal to get your bus back on the road, and being that it as a good quality labelled product it is suitable for those looking to carry out a mid-budget restoration or repair.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Notes:To fit this panel you may need the outer valance - Part number 211-813-273\/D
Additional Vehicle Info: T2 Bay
211-703-509/B – Conduit Tube, Accelerator Cable
Description:
Accelerator cable conduit tube.
Supplied in two 1.5m lengths with joining sleeve to make one continuous length.
8mm OD
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
211-703-561/D – Inner Front Valance
Description:
- Common area for rust or accident damage on Baywindow models
- Essential for restoration and repair
- SSP precision fit panel
The inner front valance is a critical component often affected by rust or accident damage on Baywindow vehicles. This part is essential for restoring the structural integrity and appearance of your vehicle, ensuring a solid and reliable front end. Ideal for both repairs and restoration projects, it helps maintain the classic look and functionality of your Baywindow.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005)
Additional Vehicle Info: Brazil Kombi,T2 Bay
211-703-599 – Cab Seat Box
Description:
Cab seat box between the front seat mounting panels.
Top quality SSP panel finished in silver weld through primer panel offering the best fit possible.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
64cm wide, 50cm deep approx 18cm high
Compatible Vehicles: - T2 Split Bus (1963,1964,1965,1966,1967) - T2 Split USA (1963,1964,1965,1966,1967)
Notes:64cm wide, 50cm deep & approx 18cm high.
Additional Vehicle Info: T2 Split
211-703-601/D – Under Cab Seat Box
Description:
Under cab seat box between the front wheel housings on bench seat models.
A top quality SSP panel offering the best fit possible and finished in silver weld through primer. Thus eliminating the additional time required to prep a normal painted panel, just align, clamp and weld.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962)
Notes:Splitscreen models from January 1955 to June 1962. From chassis 20-117902 to 971549.
Additional Vehicle Info: T2 Split
211-703-609/B – Pedal Pan for Left Hand Drive
Description:
Left hand drive pedal cover for Splitscreen models from March 1955 to 1967.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-611/F – Pedal Cluster Cover Plate JP
Description:
Metal cover plate splash panel under pedal cluster for left hand drive vehicles.
This splash panel produced by JP Classic is designed to bolt to the chassis and keep the pedal area clean and dirt free. Often removed and not replaced, these are a great finishing touch to any restoration and help reduce road noise and wind coming in through the pedals.
Designed to fit T2 Bay 1968-1971.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971)
Additional Vehicle Info: T2 Bay
211-703-611/H – Pedal Cluster Cover Plate
Description:
- High-quality replacement for damaged pedal area
- Protects pedal cluster from dirt and road grime
- For fitting use N90-529-301 with washers N01-166-610 and N01-389-05
This replacement belly pan pedal cover is an essential part for preserving the integrity of your Bay Window VW. When rust or damage affects the structure of your vehicle, replacing this smaller belly pan panel is crucial to protect the pedal cluster from dirt and road grime, ensuring the working parts remain clean and functional. It is specifically designed for left-hand drive vehicles, mounting underneath the pedal cluster at the front of the vehicle.
Formed to the original factory VW design, this metal cover plate fits superbly, providing a seamless and secure installation. Please note that not all vehicles were fitted with this part from the factory, so we recommend researching whether your vehicle requires this panel before purchasing.
Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Please note these cover plates are manufactured to fit left hand drive Brazilian Baywindow and are different to European vans. Modification will be required to make the cover plate fit your European van.
Additional Vehicle Info: T2 Bay
211-703-621/A – Front Jacking Point Left
Description:
Front left jacking point.
Laser cut and formed in 2mm steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Suitable for all years, 50-67.
Additional Vehicle Info: T2 Split
211-703-622/A – Front Jacking Point Right
Description:
Front right jacking point.
Laser cut and formed in 2mm steel.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:Suitable for all years, 50-67.
Additional Vehicle Info: T2 Split
211-703-631 – Rear Jacking Point Left or Right
Description:
Rear jacking point. Fit both left and right hand sides.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-631/A – Rear Jacking Point Left or Right
Description:
Rear jacking point for left or right - fits to end of chassis outrigger and inside of inner sill. Laser cut and formed in 2mm steel. Suitable for all years, 50-67.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-651 – Left Rear Chassis Valance Mount
Description:
Rear Chassis Valance Mount Left side.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-652 – Rear Right Chassis Valance Mount
Description:
Rear Chassis Valance Mount Right side.
Compatible Vehicles: - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
211-703-715 – Centre Under Floor Plate
Description:
One-piece central under floor plate.
Originally fitted to deluxe vehicles to protect the underside of the vehicle and reduce internal noise.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Fits between the chassis rails on a lip - vehicles that have been repaired or never had this fitted originally may not have the lip on the inner chassis rails so will need this fabricating. During the manufacturing process these end up with a slight twist in the panel, this is easily removed when stitching it into place, just ensure you have it even when you beginning welding.
Additional Vehicle Info: T2 Bay
211-707-111/B – Bumper Front Centre Section Black E-Coating
Description:
- Crafted from OE gauge steel for superior strength
- Finished with high-quality black E-coating for added protection
- Designed for a precise fit and long-lasting durability
Enhance your vehicle's front with our front bumper centre section, expertly made from OE gauge steel to ensure durability and reliability. The quality black E-coating not only enhances its appearance but also provides excellent protection against rust and wear.
This bumper is designed for a precise fit, making installation straightforward while ensuring your vehicle maintains its sleek profile. Trust in this robust front centre bumper to keep your ride looking sharp and protected for years to come.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-707-111/CHR – Bumper Front Chrome
Description:
- Finished in chrome for a bright look
- Designed for late Baywindow model
- Classic look with an eye-catching finish
This front bumper is finished in sunny climate chrome, providing a bright, eye-catching look for your vehicle. Designed to enhance your car’s appearance with a high-shine chrome finish, it requires regular polishing and waxing to maintain its sleek look and prevent corrosion.
Please note that this bumper is supplied without a warranty, emphasising the importance of regular care to keep the chrome finish in top condition. Its classic design and high-quality finish make it a stylish choice for any vehicle.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
211-707-111/J / – Bumper Front Grey Primer
Description:
- Finished in grey primer, ready for painting
- Designed for late Baywindow models
- Ideal base for custom paint jobs
This front bumper is specifically designed for late Baywindow models and comes finished in grey primer, making it ready for your custom paint job. The primer provides a smooth surface that prepares the bumper for painting, allowing you to match it perfectly with your vehicle’s colour scheme.
Built to fit seamlessly with late Baywindow buses, this bumper offers a solid base for penalisation and restoration projects. The grey primer finish ensures excellent paint adhesion and a professional look once completed.
Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979)
Notes:Bumper will require preparation work before painting.
Additional Vehicle Info: T2 Bay
211-707-113 – Bumper Step Front Left Black E-Coating
Description:
- Made from OE gauge steel for strength and durability
- Finished with black E-coating for corrosion protection
- Designed for the front left side of the bumper
This front left bumper step is crafted from OE gauge steel, providing a sturdy and authentic fit for your vehicle. The black E-coating finish offers superior corrosion protection, ensuring long-lasting durability in various weather conditions.
Ideal for restoration or replacement, this bumper step combines the original look with modern protective enhancements, making it a reliable and durable choice for your vehicle's front bumper.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-707-114 – Bumper Step Front Right Black E-Coating
Description:
- Made from OE gauge steel for strength and durability
- Finished with black E-coating for corrosion protection
- Designed for the front right side of the bumper
This front right bumper step is crafted from OE gauge steel, providing a sturdy and authentic fit for your vehicle. The black E-coating finish offers superior corrosion protection, ensuring long-lasting durability in various weather conditions.
Ideal for restoration or replacement, this bumper step combines the original look with modern protective enhancements, making it a reliable and durable choice for your vehicle's front bumper.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972)
Additional Vehicle Info: T2 Bay
211-707-135/AC – Front Left Bumper Iron
Description:
Front left bumper iron
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958)
Additional Vehicle Info: T2 Split
211-707-135/B – Front Left Bumper Iron
Description:
Front left bumper iron
Compatible Vehicles: - T2 Split Bus (1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
Replies have been locked on this page!