Fitment #155

AC1090191 – Pushrod Tube Set Aluminium Spring Loaded

Description:

T25 pushrod tube set including x8 tubes with with dual o-ring design for 1.9 and 2.1 watercooled models.

* Replace those worn out hydraulic lifters without pulling the motor
* CNC machined
* Reamed bore for perfect sealing
* Includes VITON O-rings
* Includes German seals

Compatible Vehicles: - T25 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25

AC109020 – Engle W120 Camshaft

Description:

Requires 3-bolt cam wheel and pre-1971 oil pump
Suited for engines up to 1776cc
Designed for 1.1 or 1.25 rockers, and it's specs are .397" Cam Lift, .435" Valve Lift

Optimize your engine’s performance with the Engle 120 Camshaft, engineered for Type 2s and engines up to 1776cc. This camshaft enhances power and efficiency but is supplied without a drive wheel, which must be purchased separately.

For optimal performance and longevity, always fit new cam followers when installing a new camshaft and follow the provided break-in instructions carefully. This ensures the durability and smooth operation of both the camshaft and followers.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109030 – Engle W125 Camshaft

Description:

Engle 125 camshaft.

Designed for use with a 3 bolt cam wheel and a pre 1971 oil pump. Well suited to Type 2's and engines up to 1776cc.

This camshaft is supplied without a drive wheel which must be purchased separately, you should always fit new cam followers with a new camshaft

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109100 – Engle W100 Camshaft Kit

Description:

Engle 100 camshaft Kit. Well suited to T2's and engines up to 1776cc.

Ideal for engines up to 1776cc.
Includes all essential components for installation.
Heritage design for optimal performance and reliability.

The Engle 100 Camshaft Kit is specifically crafted for engines up to 1776cc, providing a robust upgrade for your vehicle. This comprehensive kit includes everything you need for a seamless installation: a camshaft, cam gear, Febi heavy-duty lifters, heavy-duty single springs, and chromoly retainers and collets. It's designed to work with early style oil pumps (pre-1970), ensuring compatibility and performance.

Heritage kits like the Engle 100 save you both time and money, streamlining the process of enhancing your engine's capabilities. With quality components and a thoughtful design, this kit is perfect for enthusiasts looking to boost their engine’s performance without breaking the bank. Invest in the Engle 100 Camshaft Kit for reliable power and efficiency.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109110 – Engle W110 Camshaft Kit

Description:

Ideal for engines up to 1776cc.
Includes all essential components for installation.
Heritage design for optimal performance and reliability.

The Engle 110Camshaft Kit is specifically crafted for engines up to 1776cc, providing a robust upgrade for your vehicle. This comprehensive kit includes everything you need for a seamless installation: a camshaft, cam gear, Febi heavy-duty lifters, heavy-duty single springs, and chromoly retainers and collets. It's designed to work with early style oil pumps (pre-1970), ensuring compatibility and performance.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109111 – CSP Push Rod Tubes Set of 8 with Seals Spring Loaded

Description:

Designed for Type-1 engines (not for 1200cc) with motorsports in mind
CNC machined from high-grade aluminium with anodised finish
Dual O-rings and stainless steel spring prevent leaks and ensure seal pressure
Large 22mm ID for high-lift engines and 19mm ID for quick oil return

These CSP pushrod tubes are crafted for Type-1 engines, offering a high-performance solution developed with motorsports in mind. Refined for street use, they feature a large inner diameter (22mm at the head side) to clear pushrods on high-lift engines and 19mm at the case side for efficient oil return. Their design allows for easy installation, without the need to remove cylinder heads.

Constructed from CNC-machined high-grade aluminium and anodised for durability, these tubes are fitted with dual internal O-rings to prevent leaks, while the heavy-duty stainless steel external spring maintains constant pressure on the seals as the engine heats up and cools down. The greased O-rings ensure smooth movement and longevity, while German-made pushrod tube seals complete the package for a reliable and long-lasting performance upgrade.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Not for 1200 engines

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091304 – Cam Bolts

Description: Low profile bolt head to allow oil pump clearance.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091404 – CB Performance Race Master Wear Caps Set of 8

Description:

CB performance race master wear caps, set of 8

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091518 – CB Performance Elephant Foot Valve Adjuster Set 8mm

Description:

Porsche design
Durable
Easy to install

Set of 8 Elephants Feet Valve Adjusters.

Stronger and more durable by design than the old style Swivel Feet! 8mm Elephant Feet feature 100% rolled threads and solid shafts. The large Elephant Foot is patterned after the original Porsche rocker screw and completely covers the valve end to reduce friction and wear. 8mm Elephant Feet can be used with stock 40 hp, 1500 and 1600 rockers and 1.25:1 after-market rockers.

Set of 8 adjusting screws also includes four rocker block shims.

8mm valve adjustment nuts are available separately, see part number N01-115-25

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

IMPORTANT NOTE: Elephant feet are not intended for use with high lift cams. It is very important that you check the foot to body clearance at max lift. We does not recommend using on cams with more than .470" total lift.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091537 – CB Performance Camshaft Follower Set 28mm Ultralight

Description:

Weigh 22 grams less than stock lifters; approx. 76g each
Innovative two-piece design with 28mm diameter head
Reduced reciprocating weight by 1/2 lb; tested to over 9,000 RPM

CB’s 28mm Ultralight Racing Lifters represent a significant advancement in VW lifter design. Each lifter weighs approximately 76 grams, 22 grams less than stock lifters, and features a unique two-piece construction with a wide base head. This innovative design, made from specially cast hardenable iron with high carbide and chrome content, contributes to exceptional performance and durability.

The hollow lifter body supports a push rod cup made from patented stress-proof steel, secured by internal snap rings. This design supports faster opening rates and valve lifts over .500 at the cam, making them ideal for use with CB's Big Foot and other high-performance camshafts. With reduced reciprocating weight and dyno-tested reliability up to 9,000 RPM, these lifters can significantly enhance engine RPM and power. They are compatible with both steel and aluminium push rods, as well as stock or high-lift rocker arms. For optimal performance, CB recommends pairing them with Thin Wall Chromoly Push Rods.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091565 – CB Performance Pushrod Tube Set Racing

Description:

Racing pushrod tubes manufactured by CB Performance.

This is a patented design which are wider at the head end to accommodate extra pushrod movement when using ratio rockers and have an extended neck at the crankcase end to help prevent oil sloshing. A larger seal is required at the head end, use kit AC1091566. (You can stretch standard ones to fit) Supplied in raw steel in sets of 8.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091565EA – Pushrod tubes racing style each

Description:

Pushrod is a wide mouth Windage pushrod tube perfect for high performance high lift camshafts. The pushrod tube requires a special O-ring at the crank case and a regular VW seal at the cylinder head. Sold separately. Each

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091566 – CB Performance Pushrod Tube Seal Set Racing

Description:

The kit comprises of 8 normal seals and 8 of the larger O-rings needed when fitting AC1091565 CB Performance racing pushrod tubes which are larger at the head end.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1091577 – CB Performance Forged 1.4:1 Rocker Arms Assembly

Description:

Forged from 4340 Chromoly steel for unmatched strength
Induction hardened tips and H-11 Tool Steel adjusting screws
Complete set includes everything needed for installation

Elevate your engine's performance with the CB Performance Forged 1.4:1 Rocker Arms Assembly. Crafted from high-strength 4340 Chromoly steel and CNC machined to an exact 1.4:1 ratio, these rocker arms are designed for durability and reliability. The assembly features induction hardened tips and the strongest adjusting screws available, made from H-11 Tool Steel, ensuring longevity and precision in operation.

This complete set includes 8 rockers, 2 hardened shafts (38% larger than stock), 4 rocker blocks, and all necessary components such as heavy-duty Chromoly rocker studs, adjusting shims, end caps, bolts, valve caps, and lock nuts. With 100% pressure oiling to eliminate splash oiling issues, you can trust this assembly to enhance your engine's performance and longevity. Upgrade your setup with confidence and enjoy the benefits of robust engineering!

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC10920050 – Scat C20 Camshaft Kit

Description:

Complete kit for easy, trouble-free installation
Includes camshaft, gear, lifters, valve springs & more
Designed for high-revving performance engines
Premium quality for reliable, long-lasting use

The Scat C20 Camshaft Kit is designed for enthusiasts looking to boost the performance of their Type I engine with high-revving capabilities. This comprehensive kit includes everything needed for a smooth, trouble-free installation: a precision-engineered camshaft, camshaft gear, lifters, valve springs, retainers, and valve keepers.

Engineered with Scat's Hi-Rev™ technology, this camshaft kit delivers enhanced power and performance, allowing for better RPM potential and a more aggressive cam profile. Whether you're building a performance engine or upgrading an existing setup, the Scat C20 kit ensures a reliable, high-performance valvetrain that can handle the demands of spirited driving and track use.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC10920051 – Scat C25 Camshaft Kit

Description:

Complete Scat C25 cam kit for engines up to 1776cc
Includes cam, cam wheel, followers, heavy-duty valve springs, retainers, and collets
Requires new cam followers and early (up to 1971) 3-rivet oil pump

The Scat C25 cam kit provides everything you need to upgrade your T2 or engine up to 1776cc with enhanced performance. This comprehensive kit includes a Scat C25 camshaft, cam wheel, cam followers, heavy-duty valve springs, retainers, and valve collets, making it a complete solution for a performance boost.

For optimal results, it is recommended to fit new cam followers with the performance camshaft and to use an earlier 3-rivet oil pump (up to 1971). This kit is designed to deliver improved engine performance and reliability, ensuring your vehicle performs at its best.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC10920052 – Scat C35 Camshaft Kit

Description:

Complete kit: cam, wheel, followers, springs, retainers
Ideal for engines up to 1776cc
Requires 1971+ oil pump and new cam followers

Upgrade your engine's performance with the Scat C35 Cam Kit, designed to enhance power and reliability. This comprehensive kit includes a high-quality camshaft, cam wheel, cam followers, heavy-duty valve springs, retainers, and valve collets, providing everything you need for a seamless installation.

The Scat C35 is well-suited for engines up to 1776cc, making it a versatile choice for a range of performance applications. For optimal results, ensure to use new cam followers and the compatible up to 1971 oil pump, ensuring smooth operation and longevity of your engine's upgraded components.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC10920086 – Scat C25 Camshaft 1700-2000cc

Description:

Optimised for mild performance with twin carburettors
Power focused in the bottom and mid rev-range
Requires AC1092017 cam wheel, bolts included

The Scat C25 Camshaft is the perfect upgrade for mild performance builds in all air-cooled Type 4 engines using solid cam followers. Designed to enhance low to mid-range power, it's an excellent choice for engines equipped with twin carburettors, delivering smooth and responsive performance where you need it most.

This camshaft requires the bolt-on AC1092017 cam wheel, which is sold separately, though the necessary bolts come included with the cam. Built for reliability and consistency, the Scat C25 is a solid option for those seeking improved drivability without sacrificing durability or daily usability in their Type 4 engine.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

AC10920091 – Scat Camshaft Follower Set Lube-a Lobe 1700-2000cc

Description:

Set of 8 SCAT Lube-a-Lobe solid lifters for T4 engines
Made from hardened iron billets for maximum durability
Precision radius ground for long life under high tension and RPM

These SCAT Lube-a-Lobe solid lifters are crafted from the finest quality hardened iron billets, ensuring superior durability and performance for your T4 engine. Exclusively made by SCAT, each lifter features a precision radius ground on the face, designed to withstand increased valve tension, lift, and RPM loads.

This 8-piece set is engineered for optimal longevity and must be paired with SCAT performance camshafts to ensure warranty coverage. Ideal for those looking to boost engine reliability under demanding conditions.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978)

Additional Vehicle Info: T2 Bay

AC10920130 – CB Super Stock Rocker Set 1.1:1 Ratio

Description:

1.1:1 stock ratio for reliable, efficient performance
Forged rockers with billet shafts for strength and durability
Includes swivel ball adjusters, mounting blocks, and shims
QPQ Anti-wear coating and oil channel for improved longevity

The CB Performance Super Stock 1.1:1 Rocker Assembly Set is designed for enthusiasts looking to upgrade their valve train with a high-quality, reliable solution. Manufactured using 4340 forged steel and new tooling, this rocker assembly set offers a significant improvement over OEM parts. The forged rockers are paired with billet shafts, swivel ball adjusters, mounting blocks, and adjusting shims to ensure precise adjustments and durability under high-performance conditions.

CB Performance has also introduced an oil channel to the design, which enhances oil flow to the valve adjusting screw, minimizing wear and preventing galling of the rocker shaft. With induction-hardened rockers and a QPQ Anti-wear coating, these Super Stock 1.1:1 rockers are engineered for long-lasting performance and enhanced reliability in demanding conditions, making them the ideal upgrade for your engine build.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1960) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC10920130A – Scat 1.10 Ratio Rocker Assembly

Description:

1.10 ratio O.E.M rocker assembly manufactured by SCAT

Supplied with forged rockers with billet shaft kit, swivel adjusting screws, geometry pads and adjusting shims.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1092017 – Camshaft Gear, Helical, Type 4 1700-2000cc

Description:

Designed for performance camshafts, 1700-2000cc engines
Easy installation with AC109314 bolts (sold separately)
Precision-engineered for reliable power enhancement

Upgrade your Aircooled Type 4 engine with this bolt-on cam gear, crafted for use with performance camshafts. Suitable for 1700-2000cc engines, it ensures a precise fit and reliable performance improvement.

This cam gear is engineered for ease of installation and enhanced durability, providing a straightforward way to boost your engine's capabilities. Note that AC109314 bolts are required for installation and are sold separately

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

AC10920188S – Scat Ratio Rocker Set 1.25:1 Pro-Street

Description:

Complete 1.25 ratio rocker assembly for performance engines
Includes forged rockers, billet shafts, swivel ball adjusters
Mounting blocks and adjusting shims included for easy installation
Increases valve lift for more horsepower without changing duration

The SCAT Pro-Street 1.25 Rocker Assembly Set is designed to boost engine performance by increasing valve lift, resulting in more horsepower without altering the camshaft duration. Ideal for performance-minded enthusiasts, this kit includes high-quality forged rockers, billet shafts, and swivel ball adjusters, ensuring precise adjustment and durability.

While the set can be used with stock rocker shafts, it’s recommended for use with bolt-up shafts for optimal performance and reliability. The kit also includes mounting blocks and adjusting shims, making installation straightforward and hassle-free. If you're looking for a simple yet effective way to add power to your engine, the SCAT Pro-Street rocker assembly is a must-have upgrade for any high-performance build.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC10920188SA – Chromoly Rocker Arms 1.25 Ratio with Swivel Adjustment

Description:

1.25:1 ratio chromoly rockers made by Scat Enterprises. Great performance rockers at an economical price. Internal oil passage allows free flowing lubrication. Can be used with stock rocker shafts, or better yet, with high strength solid shafts. Supplied with swivel ball adjusting screws to avoid excessive valve stem wear from the increased lift.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1092019604S – 1.25 Chromoly Ratio Rocker Arm 3/8''

Description:

Single rocker arm with adjusting screw x8 required.

(These will only fit the Scat Pro Comp rocker assembly)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109203 – Scat C20 Camshaft

Description:

Scat C20 camshaft supplied without the cam wheel

Can be used with 1.4:1 rockers with a valve lift of 0.448''

New cam followers should be fitted when fitting a performance camshaft. They also require the easier up to 1971 oil pump

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109204 – Scat C25 Camshaft

Description:

Supplied without cam wheel; requires pre-1971 oil pump
.3385″ Lift (1.1) 277 Duration
Fit new cam followers for optimal performance
Engineered to withstand high valve spring pressures

Elevate your engine's performance with the Scat C25 Camshaft, designed for high reliability and strength. This camshaft is supplied without the cam wheel and requires a pre-1971 oil pump for compatibility. For best results, always install new cam followers when fitting a performance camshaft.

The Scat C25 features consistent lobe hardness through chilled cast material, compatible with 20018 lifters (55-60 RC). It’s engineered to withstand high valve spring pressures and offers a larger lobe heel for smoother rotation and added strength. Additionally, the cam is stroke-relieved to accommodate longer-stroke crankshafts. Be sure to follow the provided break-in instructions to ensure the durability and optimal performance of both the camshaft and followers.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109205 – Scat C35 Camshaft

Description:

Supplied without cam wheel; requires pre-1971 oil pump
.419″ Lift (1.1) 285 Duration
Fit new cam followers for optimal performance
Engineered to withstand high valve spring pressures

Elevate your engine's performance with the Scat C35 Camshaft, designed for high reliability and strength. This camshaft is supplied without the cam wheel and requires a pre-1971 oil pump for compatibility. For best results, always install new cam followers when fitting a performance camshaft.

The Scat C35 features consistent lobe hardness through chilled cast material, compatible with 20018 lifters (55-60 RC). It’s engineered to withstand high valve spring pressures and offers a larger lobe heel for smoother rotation and added strength. Additionally, the cam is stroke-relieved to accommodate longer-stroke crankshafts. Be sure to follow the provided break-in instructions to ensure the durability and optimal performance of both the camshaft and followers.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109212301 – Valve Adjuster Set Swivel Feet 8mm

Description:

Elephant swivel feet adjusters. These are an alternative style of high performance valve adjusting screw. There is no oil feed just splash oiling. Supplied in a set of 8. These are 8mm.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109212309 – Rocker Shaft Set Bolt Up

Description:

Bolt up rocker shaft kit manufactured by EMPI.

Essential on any tuned engine with an Engle 100 or larger cam as stock style clip together units are a weak point that will fail with high RPM's or increased valve lift. This bolt up rocker shaft kit features a fixed centre spacer. Supplied with a selection of shims for precise rocker arm adjustment.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109212309A – Rocker Shaft Set Bolt Up with Moving Centre

Description:

Bolt up rocker shaft kit

Essential on any tuned engine with an Engle 100 or larger cam as stock style clip together units are a weak point that will fail with high RPMS or increased valve lift. This bolt up rocker shaft kit features a floating centre spacer. Supplied with a selection of shims for precise rocker arm adjustment.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109214303 – Camshaft Follower Set 28mm Lightweight

Description:

28mm heavy duty camshaft followers manufactured by EMPI. Supplied in a set of 8.

These heavy duty cam followers are designed for use with high performance high lift camshafts.

When installing a new camshaft it is essential to fit the correct hardness of cam followers.

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Approx 102g each

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109214305 – Camshaft Follower Set 30mm Lightweight with Oil Hole

Description:

Heavy duty cam followers with a wide base of 30mm manufactured by EMPI. These cam followers are lightweight with an oil hole in the face to allow extra oil through. Supplied in a set of 8

These heavy duty cam followers are designed for use with high performance high lift camshafts.

When installing a new camshaft it is essential to fit the correct hardness of cam followers.

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Approx 104g

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1092205 – CB Performance Hydraulic Camshaft 1700-2000cc High Torque

Description:

Ideal for mild performance engines seeking more torque
Improves bottom and mid-range power delivery
Designed for all Aircooled Type 4 engines
Compatible with hydraulic camshaft followers

The CB Performance "Torque Special" Camshaft is engineered to enhance torque in the bottom and mid-rev range, making it an excellent choice for mild performance builds. Perfectly suited for Aircooled Type 4 engines, this camshaft helps boost engine responsiveness and low-end power, ideal for daily driving or street performance.

Designed to work with hydraulic camshaft followers, the "Torque Special" ensures smooth operation and durability across a range of driving conditions. Requires additional bolt-on cam wheel AC1092017. Bolts included with cam. Whether you're upgrading your engine for better drivability or increasing overall performance, this camshaft offers the right balance of power and reliability for your Type 4 engine.

Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:Requires additional bolt-on cam wheel AC1092017. Bolts included with cam.

Additional Vehicle Info: T25,T2 Bay

AC1092280 – CB Performance Eagle Cheater Camshaft

Description:

Cheater Cam for improved low-speed torque and driveability
Boosts passing power, top speed, and overall engine performance
Works well with smog equipment and dual carburetors
Enhances horsepower band to over 5000 RPM with supporting mods

The Cheater Cam is designed to significantly improve your VW engine's low-speed torque, making your daily driver more responsive and enjoyable to drive. With noticeable gains in driveability, passing power, and top speed, this camshaft upgrade is perfect for enhancing engine performance. It’s versatile enough to work effectively with smog equipment, offering a balance of performance and compliance.

When paired with dual carburetors, the Cheater Cam stretches your engine's horsepower band beyond 5000 RPM, unlocking even more power. For an extra boost, add Hi-Rev Springs, mild port work, and an extractor exhaust, and watch your engine perform at its peak. This setup delivers the extra kick you're looking for in a daily driver, offering both power and efficiency.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Not recommended to run with dual springs

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1092288 – CB Performance Eagle Drag Race Camshaft

Description:

CB Performance Eagle Drag Race Camshaft, 3 bolt.

If you're looking for maximum quarter mile performance, this is the cam series for you. Eagle Drag Race Cams have been designed for use with high lift rockers, dual springs, and a heavy foot.

For your convenience we have listed the valve lifts with 1.1:1 ratios and also when using the three most popular high lift rocker arm ratios. Eagle Drag Race Cams are ground on 107 degree lobe centers on special oversize billets. Each cam is heat treated, Parkerized, and shipped with new bolts and cam locks.

Recommended for use in turbo applications

Adv. Duration 308°
Dur. @ .050" 256°
Lift @ cam .378"
Lift w/1.1:1 Rocker Arms .415"
Lift w/1.25:1 .473"
Lift w/1.4:1 .529"
Lift w/1.5:1 .567"

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC1092315 – Rocker Stand Shim Set 0.015''

Description:

A packet of 4 rocker stand shims 0.015''

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

ac1092330 – Rocker Stand Shim Set 0.030''

Description:

A packet of 4 rocker stand shims 0.030''

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1092360E – Rocker Stand Shim 0.060''

Description:

Rocker stand shims 0.060'' by EMPI, Supplied in singles

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1092510 – Adjustable Camshaft Gear Kit, Helical Cut, Aluminium

Description:

Precision helical cut
Easy track-side adjustment
Includes degree discs in 2 degree increments

The Adjustable Cam Gear is engineered for high performance and compatibility with all major brand cams featuring a bolt-on gear. Designed for ease of use, it allows you to adjust your cam timing by simply removing the oil pump, making track-side adjustments quick and straightforward. This innovation ensures you can tailor your engine's power curve to suit current track conditions, optimizing performance with minimal downtime. The cam gear is securely locked in position by specialized degree discs, each set up in precise 2-degree increments.

Each kit comes complete with a selection of degree discs, enabling you to advance or retard your cam timing from minus 4 degrees to plus 4 degrees. The adjustable helical cut cam gear is compatible with all 1961 and later Type-1, 2, & 3 cams running a 3-bolt gear. Crafted from high-quality aluminium, the gear is precision machined for durability and performance. Additionally, the kit includes lock washers and SAE Grade 8 bolts, ensuring a secure and reliable installation.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1093001 – Camshaft Gear Helical

Description:

Fixed aluminium helical cut bolt-on cam gear. To be used when fitting an aftermarket camshaft.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109300BQ – Camshaft Gear Helical

Description:

Precision Engineered
Enhanced Durability
Optimal Performance
Made in the USA

The AC109300BQ fixed aluminium helical cut bolt-on cam gear. Meticulously crafted for peak engine efficiency. Engineered with precision, this gear ensures seamless synchronization between your crank and camshaft. Guarantees longevity and easily endures the rigors of high-speed operation with ease.

To be used when fitting any aftermarket 3 bolt camshaft.

Please order the necessary bolts, AC109309 x3

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1093049 – Cam Shield, 1 Shot Break In Oil

Description:

Cam-shield™ brand engine oil additive provides premium ZDDP anti-wear protection for camshafts, lifters and valve trains in your classic VW, or all out race car. Add Cam-shield™ to any conventional or synthetic engine oil to raise the ZDDP concentration to the level required for protection of your flat tappet cam engines or race engines.

The current API SM/ ILSAC GF-4 engine oils with lower levels of ZDDP (Zinc dialkyl dithiophosphate) chemistry are suspected of contributing to wear related failures in flat tappet cam engines. Other contributing factors may be incorrect engine assembly, improper cam and / or lifter metallurgy, lack of proper break-in assembly lube, and negligent maintenance of the valve train.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109309 – Camshaft Gear Bolt

Description:

Serrated skirt prevents loosening under high stress
Ideal for securing performance camshafts
Sold individually – 3 required per cam gear

These camshaft gear bolts are specifically designed for use with performance camshafts, featuring a serrated skirt that locks securely against the gear face to prevent loosening under high RPM and load conditions.

Precision-machined for strength and reliability, they’re sold individually, so be sure to order three for a complete set. A must-have for high-performance engine builds where durability and precision are critical.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109314 – Camshaft Gear Bolt Set of 5

Description:

Cam gear bolts for use with aftermarket Type4 camshafts. Supplied as a set of 5. Fits all Aircooled Type4 engines fitted with a bolt on cam wheel.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

AC109360 – Pushrod Tube Set Aluminium Adjustable

Description:

Adjustable pushrod tube kit manufactured by EMPI.

This kit is adjusted by a nut and threaded inner section and sealed by an O-ring between the inner and outer sections. Finished in Anodised blue and gold and supplied in a set of 8. This kit requires stock end seals not included in the kit. Can be fitted without the removal of the head.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094006 – Valve Lash Cap Set Hardened 8mm

Description:

Hardened valve lash caps for 8mm valve stems
Protects valve head from mushrooming
Set of 8

This set of hardened inlet/exhaust valve lash caps is designed for 8mm valve stems, offering essential protection for the valve heads. Supplied in a set of 8, these lash caps prevent mushrooming and wear, which is especially important when using stainless steel valves or in high-performance applications with radical camshafts and heavy-duty valve springs.

Each cap adds approximately 0.070'' to the valve stem height, ensuring a secure fit and longevity of your valve train components. Ideal for maintaining the integrity and performance of your engine, these lash caps are a crucial addition to your cylinder head setup.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094006-1 – Scat Pushrod Tube Seal x16

Description:

Set of 16 single oil seals for original Scat pushrod tubes

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC1094014 – Valve Spring, Single Hi Rev, Set

Description:

A set of 8 single heavy duty dual valve springs for use on high performance engines.

These valve springs are designed for use in high performance engines that will be seeing increased revs up to 6000rpm using a high performance camshaft. When running heavy duty valve springs uprated pushrods and rocker shafts must be used.

Suitable for up to 0.550'' lift

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

High rev. single valve springs, set of 8. 1.255" diameter and approx. 2.135" free length

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094016-10 – Valve Spring Set Single Hi-Rev

Description:

Hi Rev spring kit

A complete single valve spring kit ideal for smaller performance camshafts like the Engle 110 or Scat C35. The kit includes single valves springs, hardened collets and Chromoly retainers.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094017 – Valve Retainer Set Titanium

Description:

Set of 8 titanium valve retainers.

Stronger than aluminium and lighter than steel, titanium retainers supply an important step in weight reduction in todays high-revving engines. Titanium retainers are CNC machined from lab tested titanium to give your engine the maximum RPM advantage. They can be used with dual or single springs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094033 – Pushrod Set Heavy Duty Steel

Description:

Stock length (5/16'') steel pushrods manufactured by Scat.

These pushrods are stronger than stock and a must when running a performance camshaft and heavy duty valve springs. These pushrods will be noisier than stock. Supplied in sets of 8.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094044 – Valve Collet Set Hardened

Description:

A set of 16 hardened valve collets for 8mm valve stems and any 3 groove valve

To fit
1300-1600 Type 1 engines
1700-2000 Type 4 engines

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094046 – Valve Spring Set Dual Hi-Rev

Description:

Designed for high-revving engines above 6000 RPM
Made from silicone-treated steel for durability
Prevents valve float at high RPM
Requires machining of valve spring boss for installation

High-performance engines that reach 6500 RPM or more require added protection to prevent valve float, which can severely affect engine performance. The Dual Hi-Rev Valve Springs from CB are engineered specifically for these high-revving engines, ensuring valve stability and optimal performance even under extreme driving conditions.

Manufactured from silicone-treated steel, these valve springs are built to withstand the intense stress of high-performance driving. They provide the necessary strength to keep your engine running smoothly at higher RPMs. However, it is important to machine the cylinder head valve spring boss before installation to ensure proper fitment and function of the dual valve springs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC1094053-14 – Manton Pushrod Set Chromoly Cut to Length

Description:

Extra long cut to length 3/8'' diameter 4140 Chromoly Manton pushrods with ends supplied by Scat.

These pushrods are a lot stronger than stock and a must when running a performance camshaft and heavy duty valve springs. These pushrods will be noisier than stock. Supplied in sets of 8

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094054 – CB Performance Pushrod Set Aluminium Cut to Length

Description:

Manufactured from top quality alloy with T-6 heat treatment
3/8” diameter, cut to length, for high strength and durability
Micro-polished, case-hardened chromoly tips, suitable for dual valve springs up to 400lbs
Strongest VW aluminium pushrod to date

Introducing the CB Performance Aluminium Super Duty Pushrods, designed with advanced engineering and top-secret alloy for exceptional performance. These pushrods feature thick-wall aluminium tubing treated with T-6 heat treatment, making them the strongest VW aluminium pushrods available. The micro-polished, case-hardened chromoly tips ensure added strength and durability.

With a 3/8” diameter, these pushrods are built to handle VW dual valve springs with up to 400lbs open load pressure while minimizing weight and noise compared to chromoly pushrods. They expand and contract like stock pushrods, allowing for precise valve lash settings and reducing valve train noise. Each pushrod has an overall length of 11.500” and can be cut up to 1/2” shorter if needed. Not recommended for use with K-800 or VW650 valve springs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094055 – Rocker Arm Shim Set 0.015''

Description:

A pack of 8 rocker arm shims in 0.015'' thickness.

Rocker arm shims are used to setup the rocker arms on bolt up rocker shaft kits. They replace the wave washers on the stock rocker shaft set up. These shims eliminate excess side play and maintains proper valve train geometry.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Please note these shims do not fit Scat pro-comp rocker assemblies.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094056 – Rocker Arm Shim Set 0.030''

Description:

A pack of 8 rocker arm shims in 0.030'' thickness.

Rocker arm shims are used to setup the rocker arms on bolt up rocker shaft kits. They replace the wave washers on the stock rocker shaft set up. These shims eliminate excess side play and maintains proper valve train geometry.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Please note these shims do not fit Scat pro-comp rocker assemblies.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094057 – Rocker Arm Shim Set 0.060''

Description:

A pack of 8 rocker arm shims in 0.060'' thickness.

Rocker arm shims are used to setup the rocker arms on bolt up rocker shaft kits. They replace the wave washers on the stock rocker shaft set up. These shims eliminate excess side play and maintains proper valve train geometry.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Please note these shims do not fit Scat pro-comp rocker assemblies.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094058 – Rocker Arm Shim Set 0.010''

Description:

A pack of 8 rocker arm shims in 0.010'' thickness.

Rocker arm shims are used to setup the rocker arms on bolt up rocker shaft kits. They replace the wave washers on the stock rocker shaft set up. These shims eliminate excess side play and maintains proper valve train geometry.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Please note these shims do not fit Scat pro-comp rocker assemblies.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109406009 – Scat Camshaft Follower Set 72g

Description:

Racing lifters by Scat. Supplied as a set of 8.

SUPER-DUTY 72 TYPE 1 RACING LIFTERS

One-piece design only weighs 72 grams with a 29mm wide head
Increase horsepower and eliminate valve-train float at high RPMs
Strongest hollow Type 1 lifter available with 60-degree radius face

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109406010A – Scat Camshaft Follower Set Lube-a Lobe

Description:

Lightweight clearanced Lube A Lobe cam followers manufactured by Scat. Lube a lobes are designed with a little hole in the centre allowing extra oil though to the cam lobe. Supplied in a set of 8

These heavy duty cam followers are designed for use with high performance high lift camshafts.

When installing a new camshaft it is essential to fit the correct hardness of cam followers.

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC1094109A – Scat Pushrod Tube Set Big Mouth Aluminium Adjustable

Description:

Big mouth spring loaded pushrod tubes finished in gold and manufactured by Scat.

These internally spring loaded pushrod tubes have 3 internal sealing washer o rings to prevent leaks and are 20% larger in diameter at the head end to accommodate ratio rockers and high lift cams. A great replacement for a leaking stock pushrod tubes, there is no need to remove the head to install. Supplied in sets of 8 and with all the seals to fit.

Aircooled engines Type 1 - Large diameter to head, long small diameter end to the case
Waterboxer engines - Long small diameter end to the head, large diameter end to the case

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Not for Type4 engines

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094109A1 – Seal for Scat Big Mouth Pushrod Tube

Description:

Internal seal for Scat Big Mouth push rod tube.

3 required per tube

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Fits AC1094109AE and AC1094109A push rod tubes

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1094109AE – Scat Pushrod Tube Aluminium Spring Loaded Big Mouth

Description:

A single big mouth spring loaded pushrod tube finished in gold and manufactured by Scat.

These internally spring loaded pushrod tubes have 3 internal sealing washer o rings to prevent leaks and are 20% larger in diameter at the head end to accommodate ratio rockers and high lift cams. A great replacement for a leaking stock pushrod tube, there is no need to remove the head to install.

Aircooled engines - Large diameter to head, long small diameter end to the case
Waterboxer engines - Long small diameter end to the head, large diameter end to the case

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC1094111 – Pushrod Tube Set, Leak Proof, Aluminium 1300-1600cc

Description:

Top quality JayCee leak-proof push rod tube set with seals, aluminium.

Larger inside than stock, which prevents pushrod interference. Set of 8

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109440 – Camshaft Gear Set Straight Cut Non-Adjustable Steel

Description:

Fixed straight cut steel on steel cam gears.

These gears cause less horsepower loss through drag and thrust than helical gears and reduce cam bearing wear. However they do create a unique whining sound. Supplied with washers and mounting bolts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109441 – Camshaft Gear Set Straight Cut Adjustable Steel

Description:

Steel-on-steel for minimal horsepower loss and reduced drag
Adjustable for precise cam timing adjustments
Includes adjusting washers and mounting bolts

Enhance your engine's performance with these adjustable straight cut cam gears. Made from durable steel-on-steel, they minimise horsepower loss and reduce drag compared to helical gears, while also decreasing bearing wear.

Designed for precise cam timing adjustments, these gears come with all necessary adjusting washers and mounting bolts for straightforward installation. Perfect for tuning your engine to achieve optimal performance and efficiency.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109450 – Valve Adjuster Set Swivel Ball 8mm

Description:

Swivel ball style valve adjusters.

These adjusters eliminate valve tip wear caused by high lift camshafts and heavy duty valve springs. They feature oil feed holes which align with the gallery in the rocker arm. Supplied in sets of 8 with rocker shaft shims to correct valve geometry.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109452 – Ratio Rocker Arm Set 1.25:1 Standard Style

Description:

Stock style 1.25:1 ratio rockers for use with stock rocker shafts or bolt up rocker shafts. Can be used on stock rocker shafts but recommended for bolt up shafts. For use with 8mm adjusting screws and swivel feet are recommended.

One of the easiest ways to add horse power to an engine are Ratio rockers. They increase valve lift without affecting duration

The rocker arm kit can be fitted to performance engines with camshafts designed to run 1.25:1 ratio rockers.

It can be fitted to stock engines but it is important to check the valve geometry, rocker cover clearance and pushrod tube clearance when fitting these.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109455A – Scat Ratio Rocker Set 1.25:1 Pro-Comp

Description:

Precision-forged chromoly for strength and durability
1.25:1 Pro-Comp ratio for performance camshafts
Billet 4340 chromoly shafts for improved rigidity
Steel-backed bronze bushings with 3/8'' cup adjusting screws

Scat’s Forged Chromoly 1.25:1 Pro-Comp Ratio Rockers are built for high-performance engines, designed to optimize valve lift and timing with precision. Featuring Billet 4340 chromoly shafts measuring 0.765 inches in diameter, these rockers offer superior rigidity and strength. The forged arms ensure maximum durability under the stresses of high RPMs, while the steel-backed bronze bushings provide smooth, reliable operation over time.

Ideal for use with performance camshafts, these rockers are a direct upgrade for engines requiring a 1.25:1 ratio rocker. Each set is sold in pairs and includes 3/8-inch cup adjusting screws for precise valve adjustments. Whether you're upgrading an existing engine or building a high-performance setup, these rockers will enhance overall performance and reliability.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109456A – Scat Ratio Rocker Set 1.4:1 Pro-Comp

Description:

High-strength forged chromoly construction
1.41:1 Pro-Comp ratio for enhanced camshaft performance
Billet 4340 chromoly shafts (0.765'') for added durability
Steel-backed bronze bushings and 3/8'' cup adjusting screws

Scat’s Forged Chromoly 1.41:1 Pro-Comp Ratio Rockers are engineered for performance enthusiasts looking to maximize their engine's capabilities. Designed specifically for use with camshafts that require a 1.41:1 rocker ratio, these rockers are made from premium forged chromoly to withstand high RPMs and extreme conditions. The Billet 4340 chromoly shafts, with a robust 0.765-inch diameter, provide exceptional strength, while the forged arms ensure longevity and precision.

These rockers feature steel-backed bronze bushings for smooth operation and reduced wear over time. For fine-tuning, they include 3/8-inch cup adjusting screws, allowing for precise valve adjustments. Sold in pairs, these rockers are the perfect upgrade for engines requiring a 1.41:1 rocker ratio, enhancing overall performance, reliability, and durability in high-performance builds.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109463 – Valve Retainer Set Chromoly

Description:

Set of 8 forged Chromoly valve retainers. A good standard replacement or when using heavy duty single or dual valve springs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1095510 – Hardened Valve Spring Shim Set for Single Springs 0.015''

Description:

Set of eight 0.015'' hardened single valve spring shims for setting correct spring height/pressure. Provides excellent seat surface for high pressure springs by preventing cutting into heads.

Notes:Use with single heavy duty valve springs

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1095530 – Hardened Valve Spring Shim Set for Single Springs 0.030''

Description:

Set of eight 0.030'' hardened single valve spring shims for setting correct spring height/pressure. Provides excellent seat surface for high pressure springs by preventing cutting into heads.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Use with single heavy duty valve springs

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1095560 – Hardened Valve Spring Shim Set for Single Springs 0.060''

Description:

Set of eight 0.060'' hardened single valve spring shims for setting correct spring height/pressure. Provides excellent seat surface for high pressure springs by preventing cutting into heads.

Notes:Use with single heavy duty valve springs

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1095810 – Hardened Valve Spring Shim Set for Dual Springs 0.015''

Description:

Set of eight 0.015'' hardened dual valve spring shims for setting correct spring height/pressure. Provides excellent seat surface for high pressure springs by preventing cutting into heads.

Notes:Use with dual heavy duty valve springs

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1095830 – Hardened Valve Spring Shim Set for Dual Springs 0.030''

Description:

Set of eight 0.030'' hardened dual valve spring shims for setting correct spring height/pressure. Provides excellent seat surface for high pressure springs by preventing cutting into heads.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Use with dual heavy duty valve springs

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1096001 – Engle Camshaft Follower Set

Description:

High-performance camshaft followers by Engle Cams
Ideal for Engle solid lifter cams and high-speed competition
Versatile: compatible with steel or aluminum push rods and various rocker arms

These high-performance camshaft followers from Engle Cams are engineered for ultimate dependability and performance. Designed specifically for use with Engle solid lifter cams, they excel in both street and high-speed competition settings.

Whether you’re overhauling an engine or upgrading a camshaft, these followers are an excellent high-performance replacement for stock lifters. They are versatile and can be used with both steel and aluminium push rods, as well as stock or high-lift rocker arms, making them a robust choice for enhancing engine performance.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC1096001P – Engle Phosphate Coated Camshaft Follower Set

Description:

High-performance phosphate-coated camshaft followers by Engle
Enhanced lubrication with phosphate coating for extended wear life
Micro-sized pock marks retain oil for improved engine protection

Engle’s high-performance camshaft followers now feature a phosphate coating, elevating their reliability and longevity. This innovative coating enhances lubrication by creating micro-sized pock marks that hold oil, ensuring better protection for both the lifters and the engine block.

These followers offer the same great performance as the classic Engle solid lifters but with added benefits. The phosphate coating extends the wear life of your engine components, making them an excellent choice for both performance enthusiasts and those seeking reliable replacements during engine overhauls.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC109610 – Exhaust Valve 32mm x 8mm 1300-1600cc Stainless Steel

Description:

Stainless Steel Exhaust Valve 32mm x 8mm
High-quality one-piece forged stainless steel
Streamlined design with swirl polish for performance

Manufactured to exacting standards, this stainless steel exhaust valve is a premium replacement for stock 1300-1600cc Twinport engines, It can also be used in performance applications, With a precise 32mm diameter and 8mm stem, this valve ensures optimal performance and durability, Sold individually, recommended quantity x4

These valves are crafted from high-quality forged stainless steel, featuring a hardened stem and keeper grooves for enhanced reliability. Their streamlined design and swirl-polished valve heads improve airflow and performance, making them suitable for both standard replacements and performance applications with proper cylinder head modifications. Ideal for enhancing engine efficiency and longevity.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109610M – Manley Inlet Valve 33mm x 8mm Stainless Steel

Description:

Manley Performance 33mm x 8mm Stainless Steel Inlet Valve

Manufactured to the highest standards by American Performance Parts company Manley.

This is a high quality Stainless Steel replacement for stock 1300cc Single Port Inlet Valves up to 1970.

These stainless steel valves are streamlined and have a 'swirl polish' on the valve heads to increase flow.

Sold individually, recommended quantity x4

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109629 – Inlet Valve 35.5mm x 8mm 1300-1600cc Stainless Steel

Description:

Stainless Steel Inlet Valve: 35.5mm x 8mm
High-quality one-piece forged stainless steel
Streamlined design with swirl polish for performance

Manufactured to exacting standards, this stainless steel inlet valve is a premium replacement for stock 1300-1600cc Twinport and 1500cc Single Port engines, It can also be used in performance applications, With a precise 35.5mm diameter and 8mm stem, this valve ensures optimal performance and durability, Sold individually, recommended quantity x4

Suits the following engine codes - H, L, AB, AC, AS, AD, AR, AF

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109639 – Valve 37mm x 8mm Stainless Steel

Description:

Stainless Steel Valve 37mm x 8mm, 112mm total length.

Manufactured to exacting standards by Italian company IVAM. This is a high quality Stainless Steel 37mm valve; ideal for use in high-performance applications based around modified Type-1 cylinder heads. These 37mm valves can be used as inlet or exhaust valves on high performance engines.

These stainless steel valves are streamlined and have a 'swirl polish' on the valve heads.

Sold individually, recommended quantity x4

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109650 – Valve 42mm x 8mm Stainless Steel

Description:

Stainless Steel Inlet Valve 42mm x 8mm, 112mm total length.

Manufactured to exacting standards by Italian company IVAM. This is a high quality Stainless Steel 42mm valve; ideal for use in high-performance applications based around modified Type-1 cylinder heads. These 42mm valves would typically be used as inlet valves on high performance engines.

These stainless steel valves are streamlined and have a 'swirl polish' on the valve heads.

Sold individually, recommended quantity x4

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1097001 – Fast Fab Pushrod Tube Set Spring Loaded Silver

Description:

Set of 8 silver Fast Fab spring loaded pushrod tubes. Never buy another push rod tube set again! These billet aluminium machine finished push rod tubes have been designed to the specific requirements of high performance engine building. Features include two piece spring tensioned tubing that expands and contracts with engine, dual American made O-ring seals between the tubes, German push rod end seals, and stainless steel backing washers. Made in the USA these push rod tubes will outlast your engine.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Not for 1200 engines

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1097002 – Fast Fab Pushrod Tube Set Spring Loaded Black

Description:

Set of 8 black Fast Fab spring loaded pushrod tubes. Never buy another push rod tube set again! These billet aluminium machine finished push rod tubes have been designed to the specific requirements of high performance engine building. Features include two piece spring tensioned tubing that expands and contracts with engine, dual American made O-ring seals between the tubes, German push rod end seals, and stainless steel backing washers. Made in the USA these push rod tubes will outlast your engine.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Not for 1200 engines

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1098530 – Pushrod Tube, Windage, Stainless Steel

Description:

Extends into crankcase to reduce oil slop
Perfect for both standard and performance engines
Corrosion-resistant Stainless Steel

These stainless steel windage pushrod tubes are designed for 1300-1600 Type 1 engines. Their extended length allows them to reach further into the crankcase, helping to prevent oil slop during hard cornering or acceleration. This ensures better oil control and engine performance, especially under demanding driving conditions.

Whether you're building a standard engine or a high-performance one, these pushrod tubes are a great addition. Their durable stainless steel construction provides long-lasting reliability, making them suitable for any engine that requires extra oil management during spirited driving or track use.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1098531 – Pushrod Tube, Windage, 1300-1600cc

Description:

Designed for 1300-1600cc engines
Prevents oil slop during acceleration and cornering
Fits both standard and performance engines

These steel windage pushrod tubes are made for 1300-1600cc engines. They are built to extend further into the crankcase, reducing oil slop during hard cornering or acceleration.

Sold individually, they can be used with both standard and performance engine setups to improve overall engine performance. Ideal for keeping oil in place during demanding driving conditions.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109FK10 – Engle FK10 Camshaft

Description:

Engle FK10 Camshaft

Designed for use with a 3 bolt cam wheel and a pre 1971 oil pump.

Engle FK cams are specialist cams designed for use with large/drag race engines and designed for use with 1.4:1 rockers.

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Duration: 310 degrees Cam lift 0.385'' Lift valve 0.539''

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109FK7 – Engle FK7 Camshaft

Description:

Camshaft Engle FK7, requires 3 bolt cam wheel >71 oil pump. Designed for use with 1.4:1 Rockers.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109FK8 – Engle FK8 Camshaft

Description:

Engle FK8 Camshaft

Designed for use with a 3 bolt cam wheel and a pre 1971 oil pump.

Engle FK cams are specialist cams designed for use with large/drag race engines and designed for use with 1.4:1 rockers.

You should always follow the break in instructions supplied with camshafts to ensure long life of the camshaft and followers

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC109T10 – Engle TCS10 Camshaft

Description:

Engle TC10 Turbo Specific Camshaft for 1.1 or 1.25 rockers
Cam lift: .392/.383", Valve lift: .430/.420" (with 1.1 rockers)
284/276 degrees of advertised duration, 247/236 degrees at .050"
Ideal for mild Turbo VW Beetle engines up to 1776cc

The Engle TC10 Turbo Specific Camshaft is engineered to enhance the performance of mild turbocharged VW Beetle engines, particularly those up to 1776cc. With a cam lift of .392" intake and .383" exhaust, and a valve lift of .430" intake and .420" exhaust (with 1.1 rockers), this cam provides the perfect balance of power and drivability for turbo applications.

With an advertised duration of 284/276 degrees and a duration at .050" of 247/236 degrees, the TC10 cam is designed to deliver a powerband from 1000 to 5000 RPM. The more headwork and carburetion you add, the better the results. This cam is ideal for those looking to maximise the performance of their turbocharged engine while maintaining a smooth power curve throughout the rev range.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC115002 – Oil Fitting 90 Degree Hose Tail to 3/4'' JIC

Description:

90 degree hose tail to 3/4" JIC, for use on full flow crankcases.

Compatible Vehicles: - T2 Bay (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1150020 – Deep Sump 1.5 Quart 1700-2000cc

Description:

SCAT 1.5 quart aluminium deep sump for use on performance Type 4 engines. Crafted from 356-T6 aircraft-quality aluminum, SCAT oil sumps are designed with fins for maximum heat dissipation and will provide a steady supply of oil to your engine.

The sump is supplied with the mounting hardware, oil pickup tube extension, T1 oil strainer and T1 sump plate. To suit vehicles fitted with a type 4 engine.

Dimensions:9 × 12 × 3 inches

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

AC115003 – Copper Washer for AC115001

Description:

Copper washer for use with the brass hose fitting of part number AC115001.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC115004 – Hose Fitting 3/8" NPTF to 3/4" JIC

Description:

Stainless steel straight adaptor, 3/8" NPTF (crankcase) to 3/4 JIC (hose tail)

This fitting has a tapered thread for the crankcase.

To allow fitment of a 90 degree hose tail (AC115002) to a full flowed crankcase."

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split

AC115005 – Vintage Speed Oil Filler 25-36hp

Description:

Vintage Speed stainless steel Porsche 356 style oil filler for all type 1 engines 25-36hp

The stainless steel oil filler has a compact design, it has a internal chamber to separate oil and air ensuring the air can travel freely providing additional breathing capacity, it also makes oil filling easier.

The filler neck is secured on a CNC 6061 aluminium flange fixed with hex bolts. The oil filler tube is vented to the factory location.

Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - Karmann Ghia (1955,1956,1957,1958,1959,1960) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960) - T2 Split USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,T2 Split

AC115006A – Vintage Speed Oil Filler Mounting Kit, For INOX Style Oil Filler

Description:

Perfect for 1300-1600 Type 1 engines
CNC stainless steel hex key for easy replacement
Includes heavy-duty O-rings for a secure seal

Upgrade your engine's oil filling system with this INOX Oil Filler Mounting Bracket. Designed for Type 1 engines (1300-1600), this screw-on type bracket is crafted from high-quality CNC stainless steel and ensures a tight and reliable fit. The included heavy-duty O-rings provide a durable seal, minimising leaks and enhancing overall performance.

The CNC 6061 aluminium flange is built to last, offering superior strength and corrosion resistance. This mounting bracket bolt is a direct replacement for your factory oil filler nut, making installation hassle-free with the included hex key. Perfect for those seeking enhanced durability and reliability for their engine maintenance.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC115006B – Vintage Speed Locking Pin and C Clip, For INOX Style Oil Filler

Description:

Designed for VW 40 HP 1600 engines
Includes two locking pins and three C clips
Compatible only with INOX-356 Serious oil filler

This Locking Pin and C Clip set is specifically designed for the INOX-356 Serious oil filler on VW 40 HP 1600 engines. Made to ensure a secure and reliable fit, this set includes two locking pins and three C clips, giving you everything needed for a tight, leak-proof installation.

Perfectly tailored for the INOX-356 Serious system, these components help maintain the integrity of your oil filler setup. The durable pins and clips provide lasting performance, keeping your oil filler secure even under demanding conditions.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC115007 – Vintage Speed INOX Oil Filler Single Air Vent

Description:

Fits VW Type 1 engines with VW factory alternator stand
CNC 6061 aluminium flange with M19 hex key
0.4L capacity for added air breathing and oil filling
Built-in twin breather hose connection ports

The INOX 356 Oil Filler, designed in the Porsche 356 style, is a high-quality upgrade for your VW Type 1 engine. Constructed from 100% stainless steel, this oil filler enhances engine performance by providing additional breathing space. It fits engines ranging from 40HP to 1600cc and up, including VW Beetles, Buses, and Karmann Ghias. Its compact design allows for easier oil filling and improves ventilation with a unique internal chamber that separates oil and air.

The oil filler features a CNC-machined 6061 aluminium flange secured by a sturdy M19 hex key, which directly mounts to the factory VW alternator stand. The filler boasts a 0.4L capacity, making it ideal for engines producing up to 95 BHP. It also includes two M16 x 1.5mm breather hose connection ports, allowing for effective air circulation back to both sides of the carburettors. Upgrade your VW engine with this precision-engineered, stylish oil filler for improved performance and durability.

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3