Fitment #40

114-857-513/C / – Wing Mirror with Chrome Arm, Stainless Steel Head and Black Trim Right

Description:

Chrome plated arm
Stainless steel mirror head
Black plastic trim

Upgrade your vehicle's aesthetics and functionality with this wing-mounted mirror, designed specifically for the left-hand side. Featuring a sleek chrome-plated arm, it adds a touch of elegance to your car while ensuring durability and long-lasting shine. The mirror head is made from high-quality stainless steel, complemented by a black plastic trim surround for a modern yet classic look.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-857-513/CG – Wing Mirror with a Chrome Arm and Stainless Steel Head Right

Description:

Chrome plated arm and stainless steel head
Includes mirror-to-door seal
Top Quality

Enhance your vehicle with this top-quality exterior wing mirror for the right side. Featuring a chrome-plated arm and a stainless steel mirror head, it combines durability with a sleek, top quality polished look.

This door-mounted mirror includes a mirror-to-door seal, ensuring a tight, weather-resistant fit. Perfect for adding a touch of elegance and improving functionality, this mirror is both stylish and practical.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-857-513/CSS – Wing Mirror with a Chrome Arm and Stainless Head Right for Right Hand Drive

Description:

RH Exterior mirror. This is a door mounted mirror and features a chrome plated arm and a stainless steel head. It has the correct arm length to fit perfectly on right hand drive models.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-857-513/CW – Wing Mirror with a Chrome Arm and Head Right

Description:

Exact copies of original VW Germany mirrors
High-quality chrome finish
Superior spring tension mounting stud

These beautiful reproduction mirrors are exact copies of the original VW Germany made mirrors, providing an authentic look for your Beetle. We offer a variety of 68-79 Beetle outside door mirrors, ranging from high-end, expensive options to more affordable ones where you get what you pay for. This newest addition is our best value offering, combining high quality with a reasonable price.

Crafted to closely resemble the original German mirrors, these mirrors feature a stunning chrome finish and mirror glass installed without the need for an unattractive rubber seal.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-857-513/R – Round Wing Mirror Right

Description:

101 Mirror Replica
Polished chrome finish
Requires threaded hinge pin

Enhance your Volkswagen Beetle with this classic "101" mirror, a precise reproduction that brings vintage style to your ride. Featuring a polished, round mirror head mounted on a beautifully chromed, curved arm, this mirror is both functional and aesthetically pleasing. The mirror comes with all necessary installation hardware, ensuring a hassle-free upgrade, though it requires a threaded hinge pin for mounting.

Ideal for Beetle enthusiasts looking to restore their vehicle to its original glory, this mirror combines timeless design with modern craftsmanship. The attention to detail in the polished finish and durable chrome arm ensures it not only looks great but also lasts for years to come.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:You may require a threaded hinge pin.111-831-421\/A\/LR or 111-831-421\/B\/LRThese can be fitted to later models if the hinge pin is changed for the threaded type

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-898-002/A – Carpet Set for Right Hand Drive Specify Colour

Description:

Custom fit for right-hand drive Beetle saloons (1953-1955)
Handmade in the UK with narrow weave carpet, color of your choice
Factory-style fabric bound edges for a neat, authentic finish
Lifetime guarantee against mould and mildew

This 13-piece carpet set is specifically designed for the right-hand drive Volkswagen Beetle saloon models from 1953 to 1955. Handmade in the UK, it is crafted from high-quality narrow weave carpet, and you can choose from a variety of colours to suit your interior. The factory-style fabric bound edges offer an original, clean look, ensuring your restoration stays true to the classic Beetle design.

Built to last, the carpet comes with a lifetime guarantee against mould and mildew, ensuring your interior remains in pristine condition for years to come. Supplied with detailed fitting instructions and care advice, this set delivers exceptional quality, durability, and value—making it an ideal choice for restoring or upgrading the interior of your Beetle.

Please specify your chassis number when ordering.
We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Air vent shape; are they oval or circle?
Is the fuel cut off switch on the firewall?

Compatible Vehicles: - Beetle (1953,1954,1955)

Notes:The manufacturer recommends using under felt on the appropriate areas to prolong the life of the carpet and reduce noise. This can be found under part number 113-898-001/UNDER. You will need adhesive to fit some parts of this kit, please order part number 211-898-006.

Additional Vehicle Info: Beetle

114-898-002/AA – Carpet Set for Right Hand Drive Specify Colour

Description:

Carpet set. This is a 13 piece carpet set to fit a right hand drive Beetle saloon 1956-1957. It is handmade in the UK. You will need to specify your choice of colour when ordering, the colour choices can be seen either on the swatches page on the website or in the back of our catalogues. It is supplied in narrow weave carpet

This carpet set features:
-Factory style fabric bound edges.
-Excellent quality narrow weave carpet.
-Carpet guaranteed for life against mould and mildew.

We feel these carpets offer an unrivalled combination of quality and value for money.

It is supplied with detailed fitting instructions and care advise.

Please specify your chassis number when ordering.

We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a roller pedal accelerator?
Are the air vents near the front bulkhead or the doorpost?
Is the fuel cut off switch on the bulkhead?

Compatible Vehicles: - Beetle (1956,1957)

Notes:The manufacturer recommends using under felt on the appropriate areas to perlong the life of the carpet and reduce noise. This can be found under part number 113-898-001\/UNDER. You will need adhesive to fit some parts of this kit, please order part number 211-898-006.

Additional Vehicle Info: Beetle

114-898-002/BC – Carpet Set for Right Hand Drive, Choose Colour

Description:

Carpet set. This is a 13 piece carpet set to fit a right hand drive Beetle saloon 1958-1964. It is handmade in the UK.

Supplied in narrow weave carpet or nylon needlepunch (black only). Please specify your choice of colour when ordering.

This carpet set features:
- Factory style fabric bound edges.
- Excellent quality narrow weave carpet.
- Carpet guaranteed for life against mould and mildew.

We feel these carpets offer an unrivalled combination of quality and value for money.

It is supplied with detailed fitting instructions and care advise.

This carpet set is not suitable for vehicles with passenger side footrest.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964)

Notes:

The manufacturer recommends using under felt on the appropriate areas to prolong the life of the carpet and reduce noise. This can be found under part number 113-898-001/UNDER. You will need adhesive to fit some parts of this kit, please order part number 211-898-006.

Additional Vehicle Info: Beetle

114-898-002/BC/CHA – Carpet Set For Right Hand Drive Charcoal

Description:

Custom fit for right-hand drive Beetle saloons (1958-1964)
Handmade in the UK with high-quality charcoal narrow weave carpet
Factory-style fabric bound edges for a professional finish
Lifetime guarantee against mould and mildew

This 13-piece carpet set is designed specifically for the right-hand drive Volkswagen Beetle saloon models from 1958 to 1964. Handmade in the UK from premium charcoal narrow weave carpet, it offers an outstanding balance of style, durability, and value. The factory-style fabric bound edges provide a clean, professional look, while the excellent quality of the carpet ensures long-lasting performance.

In addition to its impeccable craftsmanship, the set is backed by a lifetime guarantee against mould and mildew, offering peace of mind for years to come. Supplied with easy-to-follow fitting instructions and care advice, this carpet set is the perfect choice for anyone looking to restore or upgrade their classic Beetle's interior with a product that combines superior quality and exceptional value.

Please specify your chassis number when ordering.
We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Is the fuel cut off switch on the bulkhead?
Does the vehicle have a metal kick plate (footrest) on the passenger’s side?

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964)

Additional Vehicle Info: Beetle

114-898-002/BC/OAT – Carpet Set for Right Hand Drive Oatmeal

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece Oatmeal narrow weave carpet for RHD Beetle saloon 1958-1964
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

This full carpet set is specifically designed for right-hand drive Beetle saloons from 1958-1964. Crafted from high-quality nylon, it offers durability and a perfect fit, ensuring your Beetle's interior looks both authentic and refreshed. The factory-style bound edges provide a professional finish, adding to the carpet's overall quality and appearance.

Handmade in the UK, this carpet set includes detailed fitting instructions, making installation straightforward. With a lifetime anti-rot guarantee, it delivers exceptional value, combining top-tier materials with long-lasting performance.

Compatible Vehicles: - Beetle (1958,1959,1960,1961,1962,1963,1964)

Additional Vehicle Info: Beetle

114-898-002/C/BLK – Carpet Set for Right Hand Drive Black

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 10 piece black needle punch tufted carpet for RHD Beetle saloon 1964-1968
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

This full carpet set is specifically designed for right-hand drive Beetle saloons from 1964-1968. Crafted from high-quality nylon, it offers durability and a perfect fit, ensuring your Beetle's interior looks both authentic and refreshed. The factory-style bound edges provide a professional finish, adding to the carpet's overall quality and appearance.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle

114-898-002/C/BLU – Carpet Set For Right Hand Drive Blue

Description:

Custom fit for right-hand drive Beetle saloons (1964-1968)
Handmade in the UK with premium blue narrow weave carpet
Factory-style fabric bound edges for a neat, authentic finish
Lifetime guarantee against mould and mildew

This 10-piece carpet set is expertly designed for the right-hand drive Volkswagen Beetle saloon models from 1964 to 1968. Handmade in the UK from high-quality blue narrow weave carpet, it provides a perfect blend of durability and style, tailored to complement the interior of your classic Beetle. The factory-style fabric bound edges ensure a clean, original appearance, while the excellent quality of the carpet delivers long-lasting performance.

To give you peace of mind, the carpet is backed by a lifetime guarantee against mould and mildew, ensuring your investment lasts for years to come. Supplied with detailed fitting instructions and care advice, this carpet set offers an unrivalled combination of quality, value, and ease of installation, making it the ideal choice for restoring or upgrading your Beetle’s interior.

Please specify your chassis number when ordering.
We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger’s side?
Are the air vents in the scuttle or under the door?

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle

114-898-002/C/CHA – Carpet Set for Right Hand Drive Charcoal

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 10 piece Charcoal narrow weave carpet for RHD Beetle saloon 1964-1968
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle

114-898-002/C/OAT – Carpet Set for Right Hand Drive, Brown

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 10 piece Oatmeal narrow weave carpet for RHD Beetle saloon 1964-1968
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968)

Additional Vehicle Info: Beetle

114-898-002/D – nan

114-898-002/D/02/BLK – Carpet Set for Right Hand Drive Black 1302

Description:

Custom fit for right-hand drive 1302 Beetle saloons (1971-1972)
Handmade in the UK with durable black needle punch tufted carpet
Factory-style fabric bound edges for a clean, authentic look
Lifetime guarantee against mould and mildew

This 13-piece carpet set is designed specifically for the right-hand drive Volkswagen 1302 Beetle saloon models from 1971 to 1972. Handmade in the UK from high-quality black needle punch tufted carpet, this set offers both durability and a sleek, classic finish that enhances your Beetle's interior. The factory-style fabric bound edges ensure a neat, original appearance.

Backed by a lifetime guarantee against mould and mildew, this carpet set is built to last, maintaining its quality and condition over time. Supplied with detailed fitting instructions and care advice, it offers an unbeatable combination of superior craftsmanship, practicality, and value, making it the ideal choice for restoring or upgrading your Beetle’s interior.

Please specify your chassis number when ordering.
We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger's side?
Does the vehicle have the driver's side metal kick plate near the pedals?
Are the air vents in the scuttle or under the door?

Compatible Vehicles: - Beetle (1971,1972)

Additional Vehicle Info: Beetle

114-898-002/D/02/BLUE – Carpet Set for Right Hand Drive Blue 1302

Description:

Custom fit for right-hand drive Beetle 1302 models (1971-1972)
Handmade in the UK using premium blue narrow weave carpet
Factory-style fabric bound edges for a neat, authentic finish
Lifetime guarantee against mould and mildew

This 12-piece carpet set is designed specifically for the right-hand drive Volkswagen Beetle 1302 saloon models from 1971 to 1972. Handmade in the UK, the set is crafted from high-quality blue narrow weave carpet, offering a durable, stylish, and comfortable upgrade for your Beetle’s interior. The factory-style fabric bound edges provide a professional, original look.

Built to last, the carpet is guaranteed for life against mould and mildew, ensuring long-term quality and protection for your vehicle’s interior. Supplied with detailed fitting instructions and care advice, this carpet set offers an unrivalled combination of quality, value, and ease of installation, making it the ideal choice for restoring or enhancing your Beetle’s interior.

Please specify your chassis number when ordering.
We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger's side?
Does the vehicle have the drivers side metal kick plate near the pedals?

Compatible Vehicles: - Beetle (1971,1972)

Additional Vehicle Info: Beetle

114-898-002/D/BLK – Carpet Set for Right Hand Drive, Black

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality black nylon carpet for RHD Beetle saloon 1969-1972
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

This full carpet set is specifically designed for right-hand drive Beetle saloons from 1969-1972 without a passenger-side footrest. Crafted from high-quality nylon, it offers durability and a perfect fit, ensuring your Beetle's interior looks both authentic and refreshed. The factory-style bound edges provide a professional finish, adding to the carpet's overall quality and appearance.

Compatible Vehicles: - Beetle (1969,1970,1971,1972)

Additional Vehicle Info: Beetle

114-898-002/D/CHA – Carpet Set for Right Hand Drive, Charcoal

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality Charcoal narrow weave carpet for RHD Beetle saloon 1969-1972
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

Compatible Vehicles: - Beetle (1969,1970,1971,1972)

Additional Vehicle Info: Beetle

114-898-002/D/FELT – Carpet Set for Right Hand Drive Dark Grey Perlon

Description:

Custom fit for right-hand drive Beetle saloons (1969-1972)
Handmade in the UK from dark grey Perlon nylon felted carpet
Factory-style fabric bound edges for an authentic finish
Lifetime guarantee against mould and mildew

This 13-piece carpet set is designed specifically for the right-hand drive Volkswagen Beetle saloon models from 1969 to 1972. Handmade in the UK, the set is crafted from high-quality dark grey Perlon nylon felted carpet, offering a superior finish that enhances the interior of your Beetle. The factory-style fabric bound edges provide a neat, original look, ensuring the set stays true to the classic Beetle design.

In addition to its premium construction, the carpet is guaranteed for life against mould and mildew, making it a durable and long-lasting choice for your restoration or upgrade. Supplied with detailed fitting instructions and care advice, this carpet set offers an unrivalled combination of quality, practicality, and value, making it the perfect addition to your Beetle interior.

We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger's side?
Does the vehicle have the driver's side metal kick plate near the pedals?
Are the air vents in the scuttle or under the door?

Compatible Vehicles: - Beetle (1969,1970,1971,1972)

Additional Vehicle Info: Beetle

114-898-002/D/OAT – Carpet Set for Right Hand Drive, Brown

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece Brown narrow weave carpet for RHD Beetle saloon 1969-1972
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

This full carpet set is specifically designed for right-hand drive Beetle saloons from 1969-1972 WITHOUT a passenger-side footrest. Crafted from high-quality nylon, it offers durability and a perfect fit, ensuring your Beetle's interior looks both authentic and refreshed. The factory-style bound edges provide a professional finish, adding to the carpet's overall quality and appearance.

Compatible Vehicles: - Beetle (1969,1970,1971,1972)

Additional Vehicle Info: Beetle

114-898-002/E/03/BLK – Carpet Set for Right Hand Drive Black 1303

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece black needle punch tufted carpet for RHD 1303 Beetle saloon 1973-1979
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

This full carpet set is specifically designed for right-hand drive 1303 Beetle saloons from 1973-1979. Crafted from high-quality nylon, it offers durability and a perfect fit, ensuring your Beetle's interior looks both authentic and refreshed. The factory-style bound edges provide a professional finish, adding to the carpet's overall quality and appearance.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/03/BLU – Carpet Set for Right Hand Drive Blue 1303

Description:

Carpet set. This is a 12 piece carpet set to fit a right hand drive Beetle saloon 1973-1979 1303. It is handmade in the UK and supplied in blue narrow weave carpet

This carpet set features:
-Factory style fabric bound edges.
-Excellent quality narrow weave carpet.
-Carpet guaranteed for life against mould and mildew.

We feel these carpets offer an unrivalled combination of quality and value for money.

It is supplied with detailed fitting instructions and care advise.

Please specify your chassis number when ordering.

We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger's side?
Does the vehicle have the driver,s side metal kick plate near the pedals?

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/03/CHA – Carpet Set for Right Hand Drive Charcoal 1303

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece Charcoal narrow weave carpet for RHD 1303 Beetle saloon 1973-1979
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/03/OAT – Carpet Set for Right Hand Drive Oatmeal 1303

Description:

Custom fit for right-hand drive Beetle 1303 models (1973-1979)
Handmade in the UK using premium oatmeal narrow weave carpet
Factory-style fabric bound edges for a neat, authentic finish
Lifetime guarantee against mould and mildew

This 12-piece carpet set is designed specifically for the right-hand drive Volkswagen Beetle 1303 saloon models from 1973 to 1979. Handmade in the UK, the set is crafted from high-quality oatmeal narrow weave carpet, offering a durable, stylish, and comfortable upgrade for your Beetle’s interior. The factory-style fabric bound edges provide a professional, original look.

Please specify your chassis number when ordering.
We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger's side?
Does the vehicle have the drivers side metal kick plate near the pedals?

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/BLK – Carpet Set for Right Hand Drive Black

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece black needle punch tufted carpet for RHD Beetle saloon 1973-1979
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

This full carpet set is specifically designed for right-hand drive Beetle saloons from 1973-1979. Crafted from high-quality nylon, it offers durability and a perfect fit, ensuring your Beetle's interior looks both authentic and refreshed. The factory-style bound edges provide a professional finish, adding to the carpet's overall quality and appearance.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/BLU – Carpet Set for Right Hand Drive Blue

Description:

Carpet set. This is a 13 piece carpet set to fit a right hand drive Beetle saloon 1973-1979. It is handmade in the UK and supplied in blue narrow weave carpet

This carpet set features:
-Factory style fabric bound edges.
-Excellent quality narrow weave carpet.
-Carpet guaranteed for life against mould and mildew.

We feel these carpets offer an unrivalled combination of quality and value for money.

It is supplied with detailed fitting instructions and care advise.

Please specify your chassis number when ordering.

We may need to get in touch and ask you the following questions during the ordering process:
Does the vehicle floorpan have modifications?
Does the vehicle body have modifications?
Does the vehicle have a metal kick plate (footrest) on the passenger's side?
Does the vehicle have the driver’s side metal kick plate near the pedals?

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/CHA – Carpet Set for Right Hand Drive Charcoal

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece Charcoal narrow weave carpet for RHD Beetle saloon 1973-1979
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/FELT – Carpet Set for Right Hand Drive Dark Grey Perlon

Description:

Custom fit for right-hand drive Beetle saloons (1973-1979)
Handmade in the UK from dark grey Perlon nylon felted carpet
Factory-style fabric bound edges for an authentic finish
Lifetime guarantee against mould and mildew

This 13-piece carpet set is designed specifically for the right-hand drive Volkswagen Beetle saloon models from 1973 to 1979. Handmade in the UK, the set is crafted from high-quality dark grey Perlon nylon felted carpet, offering a superior finish that enhances the interior of your Beetle. The factory-style fabric bound edges provide a neat, original look, ensuring the set stays true to the classic Beetle design.

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-898-002/E/OAT – Carpet Set for Right Hand Drive, Brown

Description:

Handmade in the UK with a lifetime anti-rot guarantee
Excellent quality 13 piece Oatmeal narrow weave carpet for RHD Beetle saloon 1973-1979
Factory-style bound edges for an authentic finish
Fully detailed fitting instructions

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

114-941-753/H – Headlight Assembly, H4 Bulb Fitment, Right Hand Drive

Description:

Designed for right-hand drive vehicles
Compatible with H4 bulb fitment
Fits both left and right-hand sides

This headlamp assembly is engineered specifically for right-hand drive vehicles, providing optimal illumination and visibility. With its H4 bulb fitment, it ensures a reliable and efficient lighting solution for your driving needs.

Versatile in design, this headlamp assembly can be installed on both the left and right-hand sides, making it a practical choice for various applications. Upgrade your vehicle's lighting system with this durable and dependable headlamp for enhanced safety on the road.

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993)

Notes:Supplied with a provision for a sidelight

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,T2 Bay

114-941-753/HR – Headlight for Right Hand Drive

Description:

Right-hand drive headlight for UK/Left Hand Traffic
H4 bulb type for optimal illumination
Fits both left and right sides, sold individually

This high-quality headlight is designed for right-hand drive vehicles in the UK and left-hand traffic countries. Featuring an H4 bulb type, it provides excellent visibility and lighting performance.

Sold individually, this headlight is versatile and can be installed on either the left or right side of your vehicle. Whether you’re replacing a damaged headlight or upgrading your lighting system, this headlight ensures a reliable, safe driving experience.

Notes:Supplied with a provision for a sidelight

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,T2 Bay

114-971-010/C – Wiring Loom Complete, Right Hand Drive with Semaphores

Description:

Complete replacement wiring loom for 55-57 oval Beetle
Compatible with floor dip switch, semaphore indicators, and 4-fuse box
Made in the UK for quality and precision

This wiring loom is a perfect replacement for the original wiring in a right hand drive European spec 55 to 57 oval Beetle. It is designed to fit vehicles equipped with a floor-mounted dip switch, semaphore indicators, a regulator mounted on the dynamo, and a 4-fuse fuse box.

Manufactured in the UK by SSP, this loom ensures reliability and high standards. With its precise fit and easy installation, it restores the electrical system of your Beetle to original specifications, helping to keep your classic vehicle running smoothly.

Compatible Vehicles: - Beetle (1955,1956,1957)

Notes:No terminal endings included (most originally fit with screw fitment), some mods may be required.

Additional Vehicle Info: Beetle

114-971-020/C – Wiring Loom for Right Hand Drive with Floor Dip Switch

Description:

For right-hand drive models
Additional wiring for wing-mounted indicators and 8-pin fuse box
High-quality replacement part

This complete wiring loom is designed specifically for right-hand drive vehicles fitted with a dynamo and a floor-mounted headlight dip switch. It includes additional wiring connections for wing-mounted indicators and features an 8-pin position fuse box.

Manufactured in the UK for SSP, this high-quality wiring loom ensures optimal performance and durability. Trust our meticulously crafted loom to keep your vehicle's electrical system running smoothly and efficiently.

Compatible Vehicles: - Beetle (1962,1963,1964,1965) - Beetle Cabrio (1962,1963,1964,1965)

Notes:Wiring is colour coded as per an original loom. Fits Beetle 08/61-07/65 from chassis number 4 010 995

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-065/C – Wiring Loom for Right Hand Drive with Column Dip Switch

Description:

Fits right-hand drive with column-mounted dip switch
Includes wiring for wing-mounted indicators and under-seat regulator
10-pin fuse box connection for easy installation

This complete wiring loom is designed specifically for right-hand drive vehicles with a column-mounted dip switch. It offers a comprehensive solution for your vehicle's electrical needs, ensuring reliable and efficient connections for various components.

Manufactured in the UK for SSP, this high-quality loom includes essential connections for wing-mounted indicators, an under-seat regulator, and a 10-pin fuse box. Trust this loom to streamline your vehicle's wiring setup and enhance its overall performance.

Compatible Vehicles: - Beetle (1966,1967) - Beetle Cabrio (1966,1967)

Notes:Wiring is colour coded as per an original loom. Fits 1500 Beetle 08/61-07/67.

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-111/C – Wiring Loom, Dynamo Systems, Right Hand Drive, 1300cc & 1302

Description:

Precision fit for right-hand drive 1300cc & 1302 models
For Beetles with dynamo only
Made in the UK exclusively for SSP

Upgrade your classic car with this complete wiring loom designed specifically for right-hand drive 1300cc and 1302 models fitted with a dynamo. Crafted in the UK exclusively for SSP, this wiring loom ensures a perfect fit and reliable performance. Whether you're restoring a vintage vehicle or maintaining its originality, this product provides the quality and precision you need.

Manufactured to the highest standards, this wiring loom offers durability and ease of installation. Every component is designed to match original specifications, ensuring seamless integration with your vehicle's electrical system. Trust in SSP's expertise and commitment to excellence to keep your beetle running smoothly and safely.

Compatible Vehicles: - Beetle (1968,1969,1970,1971) - Beetle Cabrio (1968,1969,1970,1971)

Notes:Wiring is colour coded as per an original loom. Fits Beetle 08/68-07/71.

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-112/C – Wiring Loom Complete, Right Hand Drive, 1302

Description:

Complete replacement wiring loom for right hand drive 1302 Beetle
Includes wiring for the diagnostic plug in the engine compartment
Directly copied from the original loom for accurate fit

This wiring loom offers a complete replacement for right hand drive 1302 Beetles, providing a high-quality solution for restoring or upgrading your vehicle’s electrical system. It includes all necessary wiring, with specific attention to the diagnostic plug located in the engine compartment, ensuring full functionality.

Each component in this loom is copied directly from the original design to guarantee a precise and reliable fit. With this replacement, you can be confident in the integrity and performance of your Beetle's electrical system.

Compatible Vehicles: - Beetle (1972,1973) - Beetle Cabrio (1972,1973)

Notes:Do not throw away any hardware until you have this replacement loom to view. Some original VW items are not available like for like.

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-113/C – Wiring Loom, Dynamo, Right Hand Drive, 1300 & 1303

Description:

Hand made in the UK for SSP.
Exact length and colour-coded.
Compatible with specific 1971-1973 models.

Our complete wiring loom is meticulously hand made in the UK for SSP, ensuring top-notch quality and precision. Designed specifically for right-hand drive 1300 and 1303 models with a dynamo, this loom uses an original wiring loom as a base, guaranteeing a perfect fit. Each wire is colour-coded and cut to the exact length of the original, making installation straightforward and hassle-free.

Ideal for vehicles built between December 1971 and 1973, this wiring loom supports tombstone rear lights, wing top indicators, and an external voltage regulator for the dynamo, located under the rear seat. Additionally, it includes a diagnostic plug situated in the engine bay, ensuring comprehensive compatibility and functionality for your classic beetle.

Compatible Vehicles: - Beetle (1972,1973) - Beetle Cabrio (1972,1973)

Notes:Wiring is colour coded as per an original loom. Fits Beetle 1300 12/71-7/74 Beetle 1303 8/72-7/73

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-114/C – Wiring Loom, Right Hand Drive, 1200cc with Alternator

Description:

Complete loom for right hand drive 1200cc models
Designed for vehicles with an alternator
Made in the UK for SSP

Rejuvenate your vehicle's wiring with this comprehensive loom, specifically made for right-hand drive 1200cc models equipped with an alternator.

Manufactured in the UK for SSP, this wiring loom delivers both precision and durability. Trust in the quality and craftsmanship that supports your vehicle's electrical system for years to come.

Compatible Vehicles: - Beetle (1972,1973,1974)

Notes:Wiring is colour coded as per an original loom

Additional Vehicle Info: Beetle

114-971-115/C – Wiring Loom, Right Hand Drive, Cabriolet, 1303

Description:

Complete replacement wiring loom for right-hand drive models
Compatible with 1303 Cabriolet with alternator & external regulator
Handmade in the UK using original harness for perfect fit

This is a full replacement wiring loom designed for right-hand drive 1303 Cabriolet models fitted with an alternator and an external regulator. Carefully crafted using an original wiring harness as a base, this loom is made to offer an exact fit for your vehicle.

Each wiring harness is handmade in the UK for SSP, ensuring high-quality standards. The wires are colour-coded and designed to match the length of the original harness, providing a seamless installation and reliable performanc

Compatible Vehicles: - Beetle Cabrio (1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-116/C – Wiring Loom, Right Hand Drive, 1200cc

Description:

Specifically for right-hand drive 1200cc models with dynamo
Top quality, UK-made for reliable performance
Exclusively crafted for SSP

Discover the perfect solution for your classic car restoration needs with our complete wiring loom designed for right-hand drive 1200 models equipped with a dynamo. This high-quality wiring loom ensures seamless integration and reliable performance, bringing your vintage vehicle back to life with authentic parts. Each loom is meticulously crafted in the UK, guaranteeing exceptional durability and precision.

Whether you’re restoring your classic Beetle or performing a major upgrade, this wiring loom provides a seamless fit and reliable connection. Trust in our expertly made loom to maintain the integrity of your vehicle’s electrical setup and keep your Beetle running smoothly.

Compatible Vehicles: - Beetle (1968,1969,1970)

Additional Vehicle Info: Beetle

114-971-118/C – Wiring Loom, Right Hand Drive, 1300cc with Bumper Mounted Indicators

Description:

Custom-fit for right-hand drive 1300cc Beetles
Designed for bumper-mounted indicators and external alternator
Handcrafted in the UK with colour-coded wires

Our complete wiring loom is meticulously crafted for the 1300cc right-hand drive Beetle, ensuring a perfect fit for models equipped with bumper-mounted indicators and an externally regulated alternator. Each harness is handmade in the UK by SSP, using an original wiring loom as a template to guarantee authenticity and reliability.

Every wire is colour-coded and cut to match the exact lengths of the original loom, providing a seamless installation experience. This attention to detail not only maintains the integrity of your Beetle but also ensures a straightforward and hassle-free setup.

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet

114-971-190/C – Wiring Loom Complete, Right Hand Drive, 1303

Description:

Designed for 8/73-7/74 1303 RHD Beetles
Fits Elephant foot rear lights, 3-pin alternator
Top quality, UK-made for reliable performance

Upgrade your classic 1303 right-hand drive Beetle with this complete wiring loom, crafted specifically for models from August 1973 to July 1974. Tailored to fit vehicles equipped with Elephant foot rear lights, a 3-pin alternator with an external voltage regulator, and wing top indicators, this loom ensures a perfect fit and seamless functionality. Manufactured in the UK exclusively for SSP, this wiring loom meets the highest standards of quality and durability.

Designed for easy installation, the loom simplifies the process of updating your Beetle's electrical system. With premium materials and precise construction, it guarantees reliable performance and long-lasting use. Trust in this SSP-exclusive product to maintain the authenticity and enhance the performance of your beloved 1303 Beetle.

Compatible Vehicles: - Beetle (1973,1974)

Additional Vehicle Info: Beetle

114-971-191/C – Wiring Loom for 1303 Right Hand Drive with Bumper Mounted Indicators

Description:

Top quality, UK-made for reliable performance
For Beetles with alternator and bumper indicators
For Right Hand Drive 1303 Beetles

Upgrade your 1303 Beetle with this top-quality complete wiring loom, specifically designed for right hand drive models fitted with an alternator and bumper-mounted indicators. Crafted in the UK for SSP, this wiring loom ensures optimal performance and durability, enhancing your vehicle’s electrical system with precision.

Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Notes:wiring is colour coded as per an original loom

Additional Vehicle Info: Beetle,Beetle Cabriolet

115-875-219 – Chrome Sunroof Handle for Rag Top

Description:

Chrome sunroof handle for rag top

Compatible Vehicles: - T2 Split Bus (1964,1965,1966,1967)

Additional Vehicle Info: T2 Split

115-875-395 – Female Screw Assembly for Sliding Rag Top Mechanism

Description:

Sleeved female screw assembly for sliding rag roof secures outer brackets to main rib

To fit
Beetle 50-55 eight required
Splitscreen Bus 51-59 twelve are required

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955) - T2 Split Bus (1951,1952,1953,1954,1955,1956,1957,1958,1959)

Additional Vehicle Info: Beetle,T2 Split

117-867-535 – Spring for headliner bow on sliding sun roof

Description:

Set of 4
Spring for holding the end of the rod in a sliding metal sunroof
Provides tension and support for the rod in the sunroof mechanism

Set of 4 springs for holding the end of the rod in the headliner for a sliding metal sun roof.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-209/A / – Rear Inner Edge Sunroof Seal

Description:

Rubber seal for the rear edge of the steel sun roof.

With an original metal sunroof, there are two top seals that seal the roof from water and wind. The most visible seal is on the edge of the body, and the other at the rear of the roof, many do not even know that this seal exists and is often so far weathered that it looks like it has never been there. This rubber seal can only be seen when the sunroof is removed from the car and should be glued at the end of the roof. If yours is missing or weathered beyond recognition, replace it today with this top quality German made replacement.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-223/C / – Felt Seal for Sunroof Front Inner edge

Description:

Sunroof semi rigid felt seal with beaded edge to fit the font end of a steel sunroof.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-225/B / – Felt Seal for Sunroof Rear Inner edge

Description:

Sunroof semi rigid felt seal with beaded edge to fit the Rear end of a steel sunroof.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Notes:Also at the rear of the sun roof is a rubber seal 117-877-209\/A

Additional Vehicle Info: Beetle

117-877-305/A / – Left Sunroof Cable

Description:

Sunroof cable to fit the left hand side.
Not suitable for 1303 models

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-306/A / – Right Sunroof Cable

Description:

Sunroof cable to fit the right hand side
Not suitable for 1303 models

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-365/A – Sunroof Cable Guide Left

Description:

Sunroof cable guide for steel sunroof to fit the left hand side

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-366/A – Sunroof Cable Guide Right

Description:

Sunroof cable guide for steel sunroof to fit the right hand side

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-403/ / – Sunroof Drive Gear Assembly with Short Shaft

Description:

Sunroof drive gear assembly with short shaft to fit metal sliding sunroofs

To fit
Beetle1968-1977 (not 1302 or 1303 models)

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-403/A – Sunroof Drive Gear Assembly with Long Shaft

Description:

Sunroof drive gear assembly with long shaft to fit metal sliding sunroofs

To fit
Beetle 1964-1967 and can be used on Baywindow bus from 1968-1979 although only 3/4 of the sun roof will be opened.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1964,1965,1966,1967)

Additional Vehicle Info: Beetle,T2 Bay

117-877-415 – Sunroof Front Cover Moulding

Description:

Sunroof front cover moulding with hole for operating handle, conceals the mechanism assembly.

Compatible Vehicles: - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977)

Additional Vehicle Info: Beetle

117-877-433 – Finger Plate for Sunroof Operating Handle

Description:

Finger plate recess cover for sunroof operating handle

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983,1984) - Scirocco (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Type 3 (1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:If required the screw to fit is 311-867-167.

Additional Vehicle Info: Beetle,Golf Mk1,Jetta,Scirocco,T25,T2 Bay,Type 3

126-101-063/E/NEW – Cylinder Head, Single Port, Bare, 1500-1600cc

Description:

Bare cylinder head for 1500-1600cc engines
Compatible with 35.5mm inlet & 32mm exhaust valves
Hardened valve seats for unleaded fuel

This single port bare cylinder head is designed for 1500 to 1600cc engines, offering high-performance capabilities. It is supplied as a bare head, ready to accommodate 35.5mm inlet valves and 32mm exhaust valves with 8mm valve stems.

The cylinder head features hardened valve seats, making it suitable for use with unleaded fuel. It is sold individually, providing a reliable and durable option for engine rebuilds and modifications.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1966,1967,1968,1969,1970) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970) - T2 Split Bus (1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970)

Notes:Requires 311-109-601 Inlet valve, 113-109-612\/A exhaust valve

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

126-109-335 – Pushrod Tube Spring Loaded 1300-1600cc Plastic

Description:

Spring loaded pushrod tube. An easy replacement for standard leaking pushrod tubes. Each.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Require 3x 113-109-345\/A pushrod tube seals to fit.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

126-905-205/050 – Distributor 009 Style with 050 Advance Curve

Description:

Centrifugal advance distributor with a Bosch 050 advance curve. Supplied with points, condenser and distributor cap.

050 distributors have more advance built in to them, approx 28-32 deg, ideally suited to lower compression motors and motors with semi-hemi cut heads. The benefit is that you're able to time them with less initial advance, which helps with torque without sacrificing the top end total advance.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 356 (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - 912 (1965,1966,1967,1968,1969) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:When fitting the distributor please insure the engine timing has been set correctly and the point gap checked and adjusted if required.

Additional Vehicle Info: 356,912,Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

126-905-205/CA – SSP Vintage Cast Iron 009 Distributor

Description:

Classic 009 advance curve for enhanced performance.
Features vintage black cast iron housing and dark brown Bakelite cap.
Suitable for Type 1 and Type 3 engines (1200cc to 2332cc).

Achieve the classic look of an early Bosch 010 distributor with the performance benefits of a later 009 model with the SSP vintage style cast iron distributor. This distributor combines retro aesthetics with modern functionality, featuring a robust black cast iron housing and a distinctive dark brown Bakelite cap.

Designed for Type 1 and Type 3 engines ranging from 1200cc to 2332cc, it comes equipped with "Tiger Stripe" points, offering a heavy-duty spring to prevent bounce in high-rev situations. The complete kit includes the distributor, cap, dust cap, rotor arm, O-ring, condenser, and points—everything you need for a reliable upgrade.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

126-905-205/CHR – Distributor 009 in Chrome with Centrifugal Advance

Description:

Centrifugal advance 009 Distributor in chrome supplied with points, condenser, rotor arm and distributor cap.

Notes:When fitting the distributor please insure the point gap is checked and adjusted if required and the engine timing has been set correctly using a 'dial in' timing gun at 3000>3500 revs. May come with Square or Round cable bung.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

126-905-205/NB – Distributor 009 with Centrifugal Advance

Description:

Reliable centrifugal advance for 009 distributor
Complete set with points, condenser, rotor arm, and cap
Easy installation for a smooth, hassle-free upgrade

Enhance your engine's ignition system with the Centrifugal Advance 009 Distributor. This comprehensive package comes equipped with everything you need points, condenser, rotor arm, and distributor cap ensuring your vehicle runs efficiently and reliably. Designed to enhance performance, the centrifugal advance mechanism helps improve timing accuracy and throttle response.

Whether you're restoring a classic or simply looking for a dependable replacement, this distributor offers ease of installation and superior functionality. Say goodbye to misfires and hello to a smoother ride, all while enjoying the benefits of a complete ignition solution tailored to keep your engine running at its best

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:When fitting the distributor please insure the engine timing has been set correctly and the point gap checked and adjusted if required. May come with Square or Round cable bung.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

126-905-295 – Condenser for Bosch 009 Distributor

Description:

Designed for Bosch 009 distributors
Ensures reliable ignition performance
Easy installation for quick repairs

This condenser is compatible with Bosch 009 distributors, ensuring optimal ignition performance. It provides consistent electrical contact for smoother engine operation.

A simple replacement for worn or damaged condensers, this part helps maintain reliable engine function. It's an easy fix to keep your vehicle running smoothly.

Notes:028-905-295/B condenser can be fitted as an alternative, May come with Square or Round cable bung.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

131-119-357 – Air Deflector Plate Left

Description:

Fits upper cylinder head shroud on the left side
Essential for proper engine cooling
Compatible with 1200-1600cc engine

This air deflector plate is designed to fit the upper cylinder head shroud on the left side of 1200-1600cc engines. Often missing or removed, this piece of tin plays a crucial role in directing airflow to cool the engine effectively. Use with right side plate 113-119-358/A.

Restoring or replacing this deflector plate ensures optimal engine cooling and performance, making it an important component for maintaining your vehicle's engine health. Don't overlook this often-missed part to keep your classic VW running smoothly.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

131-401-313/ / – Bearing Bush, Front Axle Beam, Inner

Description:

High-quality nylon bush for front axle beam
Essential for replacing needle bearings
Sold individually, replace in sets of four

This inner bearing bush is made from durable nylon and is specifically designed for the front axle beam. It is essential when replacing the needle bearings within the beam, ensuring smooth operation and long-lasting performance.

Sold individually, it’s recommended to replace these bushes in sets of four to maintain balance and efficiency in your vehicle's suspension system. Ideal for mechanics and DIY enthusiasts, this bush guarantees precision and reliability.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971,1972)

Notes:We would recommend checking the dimensions prior to ordering.

Additional Vehicle Info: Beetle,Beetle Cabriolet

131-405-103/A – Torsion Arm with Ball Joint, Upper, Front, Left

Description:

Reconditioned for reliable performance
Includes new ball joint for a secure fit
Designed for left-hand side installation

This reconditioned front upper torsion arm is made to provide dependable support for your vehicle. It comes with a new ball joint, ensuring a secure and proper fit for the left-hand side.

Ideal as a replacement part, this torsion arm has been carefully refurbished to help maintain your vehicle's suspension system. It's a practical choice to restore functionality and improve driving comfort.

Notes:

Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Camber nuts advisable to change AC401380

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-103/A/BARE – Torsion Arm without Ball Joint, Upper, Front, Left

Description:

Reconditioned for reliable performance
Designed for left-hand side installation
Does not include a ball joint

This reconditioned front upper torsion arm provides dependable support for your vehicle. It is designed specifically for the left-hand side, ensuring a secure and proper fit. Please note that this part does not come with a ball joint.

Ideal as a replacement part, this torsion arm has been carefully refurbished to help maintain your vehicle's suspension system. Choosing this part is a practical way to restore functionality and enhance driving comfort.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971)

Notes:

Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Upper Ball Joints 131-405-361/F

Additional Vehicle Info: Beetle,Beetle Cabriolet

131-405-104/A – Torsion Arm with Ball Joint, Upper, Front, Right

Description:

Reconditioned for reliable performance
Includes new ball joint for a secure fit
Designed for right-hand side installation

This reconditioned front upper torsion arm is made to provide dependable support for your vehicle. It comes with a new ball joint, ensuring a secure and proper fit for the right-hand side.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:

Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Camber nuts advisable to change AC401380

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-104/A/BARE – Torsion Arm without Ball Joint, Upper, Front, Right

Description:

Reconditioned for reliable performance
Designed for right-hand side installation
Does not include a ball joint

This reconditioned front upper torsion arm provides dependable support for your vehicle. It is designed specifically for the right-hand side, ensuring a secure and proper fit. Please note that this part does not come with a ball joint.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971)

Notes:

Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Upper Ball Joints 131-405-361/F

Additional Vehicle Info: Beetle,Beetle Cabriolet

131-405-129 – Lower Torsion Arm Seal

Description:

Lower torsion arm seal for Beetle & Karmann Ghia 1966 on
Prevents dirt and moisture from damaging beam bearings
OE quality from FORST with original-style steel ring

This lower torsion arm seal is designed for Beetle and Karmann Ghia models from 1966 onward, featuring a ball joint front suspension. Installed between the lower torsion arms and the axle beam, these seals help protect your beam bearings by keeping dirt and moisture out, ensuring they remain in optimal condition.

Manufactured by FORST to OE quality standards, this seal is built to precise tolerances and includes the original-style steel ring for durability and secure fitment. Sold individually, you will need two per car. For matching upper torsion seals, see item 131-405-131.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-405-129/ALT – Lower Torsion Arm Seal

Description:

Lower torsion arm seal for Beetle and Karmann Ghia 1966 onwards with ball joint front suspension.

Fitted between the lower torsion arms and the axle beam itself, these grease seals ensure your beam bearings stay in top condition by preventing the ingress of dirt and moisture.

Good quality part from Brazil. Manufactured in rubber and includes original style steel ring

Sold individually, 2 required per car.

Matching upper torsion seals are item 131-405-131/ALT

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Buggy/Baja (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

131-405-131 – Upper Torsion Arm Seal

Description:

Upper torsion arm seal for Beetle & Karmann Ghia 1966 on
Prevents dirt and moisture from damaging beam bearings
OE quality from FORST with original-style steel ring

This upper torsion arm seal is designed for Beetle and Karmann Ghia models from 1966 onwards with ball joint front suspension. Positioned between the upper torsion arms and the axle beam, these grease seals protect your beam bearings from dirt and moisture, ensuring they remain in top condition for improved performance.

Manufactured by FORST to OE quality standards, this seal is built to precise tolerances and includes the original-style steel ring for durability and secure installation. Sold individually, two seals are required per vehicle. For matching lower torsion seals, see item 131-405-129.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-131/ALT – Upper Torsion Arm Seal

Description:

Compatible with 1966+ Beetle & Karmann Ghia
Prevents dirt & moisture from damaging bearings
Ensures long-lasting axle beam performance

This upper torsion arm seal is designed for Beetle and Karmann Ghia models from 1966 onwards with ball joint front suspension. It fits perfectly between the upper torsion arms and the axle beam, providing a secure seal.

By preventing dirt and moisture from entering, this essential part helps maintain the integrity of your beam bearings, ensuring they remain in top condition for optimal vehicle performance.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

131-405-151/A – Torsion Arm with Ball Joint, Lower, Front, Left

Description:

Reconditioned for reliable performance
Includes new ball joint for a secure fit
Designed for left-hand side installation

This reconditioned front lower torsion arm is made to provide dependable support for your vehicle. It comes with a new ball joint, ensuring a secure and proper fit for the left-hand side.

Notes:Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-151/A/BARE – Torsion Arm without Ball Joint, Lower, Front, Left

Description:

Reconditioned for reliable performance
Designed for left-hand side installation
Does not include a ball joint

This reconditioned front lower torsion arm provides dependable support for your vehicle. It is designed specifically for the left-hand side, ensuring a secure and proper fit. Please note that this part does not come with a ball joint.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971)

Notes:

Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Recommended Ball Joint 131-405-371/G

Additional Vehicle Info: Beetle,Beetle Cabriolet

131-405-152/A – Torsion Arm with Ball Joint, Lower, Front, Right

Description:

Reconditioned for reliable performance
Includes new ball joint for a secure fit
Designed for right-hand side installation

This reconditioned front lower torsion arm is made to provide dependable support for your vehicle. It comes with a new ball joint, ensuring a secure and proper fit for the right-hand side.

Notes:Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-152/A/BARE – Torsion Arm without Ball Joint, Lower, Front, Right

Description:

Reconditioned for reliable performance
Designed for right-hand side installation
Does not include a ball joint

This reconditioned front lower torsion arm provides dependable support for your vehicle. It is designed specifically for the right-hand side, ensuring a secure and proper fit. Please note that this part does not come with a ball joint.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971)

Notes:

Please be aware that sometimes reconditioned torsion arms are missing their end caps, retain your old ones just in case

Recommended Ball Joint 131-405-371/G

Additional Vehicle Info: Beetle,Beetle Cabriolet

131-405-361 – Front Upper Ball Joint

Description:

Front upper ball joint
To fit all standard axle beam Beetle models from 1966 to 1979 and Karmann Ghia models from 1966 to 1974. Will also fit all 1302 and 1303 models up to 1973 chassis >>133 3200 000

Ball joints are an important component of any vehicle’s suspension, when they begin to have problems or fail, the overall handling and ride characteristics of the vehicle are likely to become compromised. For this reason, if you suspect that your vehicle’s ball joints have become severely worn, replace them with these top quality replacements.

Notes:For 1303 1974 onwards, use 133-407-361

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25

131-405-361/F – Ball Joint, Front, Upper, Standard Axle Beam, Standard

Description:

True-to-OE quality for exceptional performance.
Durable construction reduces maintenance needs.
2-year guarantee for added peace of mind.

The Meyle standard front upper ball joint is engineered for exceptional performance, offering true-to-OE quality that ensures your vehicle operates smoothly and efficiently. Its precise fit and robust construction minimise maintenance issues, providing a more reliable driving experience.

Backed by a 2-year guarantee, this ball joint affirms Meyle's commitment to durability and dependability. Trust in Meyle’s superior craftsmanship to enhance the safety and longevity of your vehicle, making it a smart investment for long-lasting performance.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-361/FBQ – Ball Joint, Front, Upper, for Standard Axle Beam

Description:

Meets or exceeds OEM specifications
Exceptional steering stability
Ensures optimal performance and reliability

Front upper ball joint for standard axle beam designed to meet or exceed OEM specifications, this Lemforder ball joint offers exceptional steering stability, responsiveness, and overall ride comfort. Engineered for precise fit and function, it enhances your vehicle's handling, ensuring a smooth and safe driving experience. Each unit undergoes rigorous testing and quality checks, guaranteeing its durability and performance.

With Lemforder’s commitment to excellence, you can trust this ball joint to deliver unmatched reliability. Whether navigating city streets or tackling rough terrain, this component provides the peace of mind you need. Upgrade your vehicle's suspension system with a product designed to meet the highest standards of automotive engineering.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-371 – Lower Ball Joint

Description:

Front lower ball joint
To fit all standard axle beam Beetle models from 1966 to 1979 and Karmann Ghia models from 1966 to 1974.

Ball joints are an important component of any vehicle’s suspension, when they begin to have problems or fail, the overall handling and ride characteristics of the vehicle are likely to become compromised. For this reason, if you suspect that your vehicle’s ball joints have become severely worn, replace them with these top quality replacements.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia

131-405-371/G – Ball Joint, Front, Lower, Standard Axle Beam, Standard

Description:

True-to-OE quality for precise fit
Robust construction for reliability
2-year guarantee for peace of mind

The Meyle standard front upper ball joint is expertly designed for axle beam suspension, ensuring a perfect fit and seamless operation. Meeting true-to-OE standards, this high-quality component allows your vehicle to run smoothly and efficiently. Its durable construction minimises maintenance, providing a reliable driving experience that will stand the test of time.

With a 2-year guarantee, the Meyle ball joint delivers unmatched durability and dependability. Trust Meyle's exceptional craftsmanship to keep your vehicle safe and performing at its best, making this ball joint a smart investment for those who demand high-performance suspension components.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-371/GBQ – Ball Joint, Front, Lower, for Standard Axle Beam

Description:

Meets or exceeds OEM specifications
Exceptional steering stability
Ensures optimal performance and reliability

Front lower ball joint for standard axle beam designed to meet or exceed OEM specifications, this Lemforder ball joint offers exceptional steering stability, responsiveness, and overall ride comfort. Engineered for precise fit and function, it enhances your vehicle's handling, ensuring a smooth and safe driving experience. Each unit undergoes rigorous testing and quality checks, guaranteeing its durability and performance.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-375/A – Suspension Ball Joint Rubber Boot

Description:

Fits torsion bar models (1966-1979)
Fits lower ball joint (1302 & 1303 models)
Durable and flexible

This upper ball joint rubber boot is designed for torsion bar models from 1966 to 1979 and serves as a lower ball joint boot for 1302 and 1303 models from 1970 to July 1973. Its durable and flexible construction ensures long-lasting protection and performance.

By effectively sealing and protecting the ball joints, this rubber boot helps maintain smooth operation and extends the lifespan of your vehicle's suspension components.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Can be used as a lower if 131-405-377 is out of stock

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-405-377 – Rubber Boot for Ball Joint & Tie Rod End

Description:

Replacement rubber boot for ball joints
Fits various models; check fitting list
Protects tie rod ends from dirt and moisture

This replacement rubber boot is designed for ball joints and tie rod ends, offering protection against dirt and moisture. It helps maintain the functionality of your vehicle's steering components.

Compatible with multiple models, please refer to the fitting list to ensure proper fit. It's an easy-to-install part that helps keep your vehicle running smoothly.

Fitments
Beetle lower ball joint boot for torsion bar models 1966 to 1979.
T25 Tie rod end boot
Golf Mk1 Tie rod end boot
Scirocco Tie rod end boot

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Scirocco,T25

131-405-423/A – Washer for Upper Ball Joint

Description: Washer for the upper ball joint. Supplied as a pair

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)

Notes:Beetle from chassis number 116 372 333 Karmann Ghia from chassis 146 372 333

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-615/A – Front Brake Drum, 5x205 Stud Pattern, Single

Description:

Supplied individually, replace in pairs
5x205 PCD stud pattern for secure fit
Ensures smooth braking performance

This front brake drum, featuring a 5x205 PCD stud pattern, is a vital component for your vehicle’s braking system. Supplied as a single unit, it is strongly recommended to replace brake drums in pairs for balanced and efficient braking performance.

Designed to deliver reliable stopping power, this brake drum ensures optimal fit and function. Whether you're maintaining or upgrading your vehicle, this high-quality part will keep your braking system performing at its best.

Compatible Vehicles: - Beetle (1966,1967) - Beetle Cabrio (1966,1967) - Karmann Ghia (1966)

Notes:It is important that you wipe the inside of the drum (where the shoes will be contacting the drum) with a good quality brake cleaner. This ensures all oxidation prohibiting oil has been removed before fitting. Also, we advise, that a full inspection of the brake system components are checked for excessive wear and or damage.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker

131-405-641/B – Front Hub Seal

Description:

Front wheel bearing hub seal.

Compatible Vehicles: - Beetle (1966,1967,1968) - Beetle Cabrio (1966,1967,1968) - Karmann Ghia (1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-405-669 – Hub Nut Front Left

Description:

Clamping nut with bolt for front hub/spindle
Fits Volkswagen Beetle, Karmann Ghia, Type 3 (Left side only)
Also fits Porsche 914-4 (1970-1976) Left side only

This clamping nut, complete with bolt, is designed for securing the front hub/spindle on various Volkswagen and Porsche models. It’s the perfect replacement for worn or damaged parts, ensuring a secure fit on the left side of your vehicle.

Compatible with the Volkswagen Beetle (1966-1979), Karmann Ghia (1966-1974), and Type 3 (1966-1973) on the left side, as well as the Porsche 914-4 (1970-1976) left side, this high-quality component ensures reliable performance and durability for your front suspension system.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 914,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-405-670 – Hub Nut Front Right

Description:

Clamping nut with bolt for front hub/spindle
Fits Volkswagen Beetle, Karmann Ghia, Type 3 (Right side only)
Also fits Porsche 924 (Left and Right 1976-1985) and 914-4 (Right side only)

This clamping nut, complete with bolt, is designed for securing the front hub/spindle on various Volkswagen and Porsche models. It is a crucial part for the right side of the vehicle, ensuring a secure fit for the front suspension.

Compatible with the Volkswagen Beetle (1966-1979), Karmann Ghia (1966-1974), and Type 3 (1966-1973) on the right side, as well as the Porsche 914-4 (1970-1976) right side and the Porsche 924 (1976-1985) for both left and right sides, this high-quality component guarantees reliability and durability.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 914,924,Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

131-411-107/A – Torsion Leave Set, Ball Joint Front Beam

Description:

10 leaves per kit: 4 full width, 6 thinner width
Durable and reliable for ball joint front beams
2 sets needed per beam

This torsion leaf set is designed for use with ball joint front beams. Each kit contains a total of 10 leaves: 4 full-width and 6 thinner-width, providing the necessary parts for a sturdy suspension setup.

To fully equip a beam, you'll need two kits. These leaves are built to last and offer the durability needed for various driving conditions.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-411-107/AF – Torsion Leaves for Ball Joint Axle Beam

Description:

Fits ball joint axle beam (1 pack, 2 required per axle)
Includes 10 leaves: 4 full-width, 6 thinner width
Durable construction for reliable axle performance

This pack of standard length axle beam leaves is designed to fit ball joint axle beams. Each kit contains 10 leaves, including 4 full-width leaves for stability and 6 thinner width leaves for flexibility, providing balanced performance. Please note, 2 packs are required per axle for complete installation.

Crafted with durability in mind, these axle beam leaves ensure smooth, long-lasting performance for your vehicle's suspension system. Whether you're upgrading or replacing worn parts, this kit offers an easy and effective solution.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-411-309 – Front Anti-Roll Bar

Description:

Standard front anti roll bar to fit a ball jointed axle beam

Excluding 1302 or 1303

Notes:Consider replacing the mounting kits, 111-498-101\/ARP or 111-498-101\/ASS

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-155 – Steering Box Clamp

Description:

Steering box clamp for ball joint beam axle.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970) - Beetle USA (1968,1969,1970) - Buggy/Baja (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja

131-415-801/B – Tie Rod Left Hand Drive Short Complete

Description:

Complete short tie rod including ends. For left hand drive Beetle from August 1965 to April 1968.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1965,1966,1967,1968) - Beetle Cabrio (1965,1966,1967,1968) - Beetle USA (1965,1966,1967,1968) - Karmann Ghia (1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-801/BM – Tie Rod Left Hand Drive Short Complete

Description: Complete short tie rod including ends. For left hand drive Beetle from August 1965 to April 1968.

Compatible Vehicles: - Beetle (1965,1966,1967,1968) - Beetle Cabrio (1965,1966,1967,1968) - Karmann Ghia (1965,1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-801/F – Tie Rod Left Hand Drive Short Complete

Description:

Complete short tie rod including ends. For left hand drive Beetles from May 1968 to 1979. left hand drive only

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970) - Beetle USA (1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-801/F/B – Tie Rod Short Left Hand Drive Bare

Description:

Left hand drive short tie rod without tie rod ends. The clamps for the tie rods are included.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan.

Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Beetle USA (1966,1967,1968,1969,1970) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

131-415-802/D – Tie Rod Left Hand Drive Long Complete

Description:

Tie rod, long, complete with tie rod ends to fit left hand drive Beetle from August 1965 to April 1968.

Designed and engineered by SSP in the U.K. and manufactured in Taiwan. Supplied with top quality Meyle tie rod ends

Compatible Vehicles: - Beetle (1966,1967,1968) - Beetle Cabrio (1966,1967,1968) - Beetle USA (1966,1967,1968) - Karmann Ghia (1966,1967,1968)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia