901-503-043-99 – Front Wing Lower Section, Left, For Backdating
Description:
Front lower section of the front wing with indicator frame. Use to backdate a G-model or 964 wing to F-model, to be welded on.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 911,912,930,964
901-503-044-23-GRV – Indicator Metal Frame, Front Right, Coupe
Description:
Front indicator metal frame for the right side of long wheel base Coupe models only.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-503-044-99 – Front Wing Lower Section, Right, For Backdating
Description:
Front lower section of the front wing with indicator frame. Use to backdate a G-model or 964 wing to F-model, to be welded on.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 911,912,930,964
901-503-059-00 – Rear Wheel Arch Repair, SWB, Left
Description:
Rear wheel arch repair section for short wheel base models, left.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-503-060-00 – Rear Wheel Arch Repair, SWB, Right
Description:
Rear wheel arch repair section for short wheel base models, right.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-503-073-23 – Light Support Panel, Rear Left
Description:
Support panel for the rear light in the rear quarter panel. Left side for long wheel base.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-503-074-23 – Light Support Panel, Rear Right
Description:
Support panel for the rear light in the rear quarter panel. Right side for long wheel base.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-503-081-40 – Parcel Shelf or Heel Panel Bracket
Description:
Parcel shelf or heel panel bracket.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,930
901-503-081-50 – Parcel Shelf Bracket Repair Section
Description:
Parcel shelf bracket repair section under the rear window.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-503-090-21 – Windscreen Frame
Description:
Windscreen frame.
To fit:
911 1965-1973
911 1974-1989 requires modification for washer jets
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,930
901-503-090-99 – Windscreen Frame Lower Repair
Description:
Windscreen frame lower repair section.
To fit:
911 1965-1973
912 1965-1969
911 1974-1989 requires modification for washer jets
911 (930) Turbo 1975-1989 requires modification for washer jets
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,930
901-503-394-22 – Wing Beading, 4.3mm
Description:
Wing beading, for the joint between the front wing and the scuttle panel.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-503-401-00 – Door Sill Outer Panel, Left, Early Version
Description:
Door sill outer panel, left. Early version.
To fit:
911 01/1963-07/1965
Compatible Vehicles: - 911 (1965)
Additional Vehicle Info: 911
901-503-401-20 – Door Sill Outer Panel, Left
Description:
Door sill outer panel, left. Short wheel base models only.
To fit:
911 08/1965-07/1968
912 08/1965-07/1968
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-503-402-00 – Door Sill Outer Panel, Right, Early Version
Description:
Door sill outer panel, right. Early version.
To fit:
911 01/1963-07/1965
Compatible Vehicles: - 911 (1965)
Additional Vehicle Info: 911
901-503-402-20 – Door Sill Outer Panel, Right
Description:
Door sill outer panel, right. Short wheel base models only.
To fit:
911 08/1965-07/1968
912 08/1965-07/1968
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-504-031-20 – Fuel Filler Flap
Description:
Fuel filler flap located on the left wing.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-504-031-99 – Fuel Tank Filler Housing
Description:
Fuel tank filler housing without filler flap, on the front left wing. To fit short wheel base models only.
Compatible Vehicles: - 911 (1965,1966,1967) - 912 (1965,1966,1967)
Additional Vehicle Info: 911,912
901-504-043-00 – Smugglers Box Cover
Description:
Smugglers box cover/lid. For left hand drive vehicles only.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-504-079-00 – Torsion Bar Cover
Description:
Torsion bar cover to fit left or right side.
- Guaranteed fitment
- 24 month unlimited mileage warranty
- High quality materials
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969,1976) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)
Additional Vehicle Info: 911,912,930
901-504-317-21 – Fuel Flap Release Cable
Description:
Fuel flap release cable.
- Replacement of frayed or broken OE cable instantly restores proper fuel filler door release
- Enables repair of release mechanism without having to replace entire assembly
- High-quality materials for durability and long life
- 24 Month Unlimited Mileage Warranty
To fit:
911/912 1965-1968 from chassis F 030 0255
911/912 1969-1989
911 (930) 1975-1989
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-504-731-30 – Centre Tunnel Shift Linkage Inspection Cover, No Ribs
Description:
- Manufactured to OE standards
- High quality materials
- Without ribs for Webasto heating/ventilation
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-504-731-31 – Centre Tunnel Shift Linkage Inspection Cover, With Ribs
Description:
- Manufactured to OE standards
- High quality materials
- With ribs for Webasto heating/ventilation
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-504-759-01 – Rear Torsion Bar Cover Gasket
Description:
Rubber gasket for the torsion bar cover in the rear wing.
To fit:
911 1965-1986 vehicles with 915 type gearbox
911 (930) 1975-1986 vehicles with 915 type gearbox
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986)
Additional Vehicle Info: 911,912,912E,930
901-504-932-20 – Seal Fuel Tank to Body
Description:
Foam seal fitted between the fuel tank and body.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,930
901-505-011-00 – Front Bumper, S Model Style, SWB
Description:
Front bumper. Later S model style without holes for fog lights, as fitted to ’69-’73 911 S models but suitable for the SWB. Can be fitted to all 911 and 912 SWB models.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-011-20 – Front Bumper without Fog Light Holes
Description:
- For short wheel base (SWB) models
- Without holes for fog lights
- Manufactured to OE standards
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-011-20-GRV – Front Bumper with Fog Light Holes
Description:
Front bumper with holes for fog lights. To fit short wheel base models only.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-011-20/A – Front Bumper with Air Inlets
Description:
Front bumper with air inlets in left and right side. With holes for fog lights. To fit short wheel base models only.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-021-20 – Rear Bumper Corner with Tail Pipe Delete
Description:
- Fits SWB Porsche 911 & 912 models
- Designed for centre-exit exhaust setups
- Removes unused tail pipe cut out
Upgrade your classic Porsche 911 or 912 with this left-side rear bumper corner, designed without a tail pipe cut-out. Perfect for short-wheelbase models, it allows for a clean, symmetrical look when switching to a centre-exit exhaust. Crafted for a seamless fit, this replacement ensures a refined and period-correct appearance.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-021-20-GRV – Rear Bumper Corner, Left
Description:
Rear bumper corner for the left side. To fit short wheel base models only.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-021-99 – Bracket for Rear Bumper Corner, Left
Description:
- Manufactured to OE standards
- High quality materials
- Welds inside the rear bumper corner
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-022-20-GRV – Rear Bumper Corner, Right
Description:
Rear bumper corner for the right side. To fit short wheel base models only.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-022-99 – Bracket for Rear Bumper Corner, Right
Description:
- Manufactured to OE standards
- High quality materials
- Welds inside the rear bumper corner
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-023-20-ALU – Rear Bumper Centre Section, Aluminium
Description:
Rear bumper centre section in aluminium.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-023-20-GRV – Rear Bumper Centre Section
Description:
Rear bumper centre section.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-031-26 – Bumper Overrider, Front Left, Chrome
Description:
Front bumper overrider for the left side, finished in chrome. For models with narrow trim.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-032-26 – Bumper Overrider, Front Right, Chrome
Description:
Front bumper overrider for the right side, finished in chrome. For models with narrow trim.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-033-20 – Bumper Overrider, Rear Left or Right, Chrome
Description:
Rear bumper overrider for the left or right side, finished in chrome. For models without trim.
To fit:
911 1965-1973
912 1965-1969
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-037-00-GRV – Front Bumper Support
Description:
Front bumper support to fit left or right.
- Guaranteed fitment
- Replacement of bent or rusted factory bumper brackets restores vehicle appearance and helps prevent body damage during minor impacts to bumper
- Manufactured to OE bracket dimensions for original appearance and function
- High-quality materials are resistant to weathering and road spray
- 24 month unlimited mileage warranty
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-041-32 – Bumper Moulding Front Narrow Chrome with Impact Rubber
Description:
Front bumper chrome moulding with impact rubber. Narrow type 1/2 inch wide.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-043-00 – Bumper Corner Moulding Rear Narrow Chrome with Impact Rubber
Description:
Rear bumper corner chrome moulding with impact rubber to fit left or right side. Narrow type 1/2 inch wide. For vehicles without bumper reflector.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-043-02 – Bumper Corner Moulding Rear Narrow Chrome with Impact Rubber
Description:
Rear bumper corner chrome moulding with impact rubber to fit left or right side. Narrow type 1/2 inch wide. For vehicles with bumper reflector.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973)
Additional Vehicle Info: 911,912
901-505-045-51 – Bumper Moulding Front Wide Chrome with Impact Rubber
Description:
Front bumper chrome moulding with impact rubber. Wide style, 2 inch wide.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973)
Additional Vehicle Info: 911,912
901-505-046-50 – Bumper Corner Moulding Rear Wide Chrome with Impact Rubber
Description:
Rear bumper corner chrome moulding with impact rubber to fit left or right side. 2 inch wide. For vehicles without bumper reflector.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-046-51 – Bumper Corner Moulding Rear Wide Chrome with Impact Rubber
Description:
Rear bumper corner chrome moulding with impact rubber to fit left or right side. 2 inch wide. For vehicles with bumper reflector.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973)
Additional Vehicle Info: 911,912
901-505-091-20 – Front Bumper to Body Seal
Description:
Front bumper to body seal which fits on top of the bumper.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-092-20 – Rear Bumper to Quarter Panel Seal
Description:
Rear bumper to quarter panel seal to fit left or right side.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-093-20 – Rear Bumper Quarter Panel Seal, Left
Description:
Rear bumper to quarter panel seal, left.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-094-20 – Rear Bumper to Quarter Panel Seal, Right
Description:
Rear bumper to quarter panel seal, right.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-131-20 – Front Bumper Retaining Bracket
Description:
Retaining bracket for the front bumper, 2 required per vehicle.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-505-135-01 – Front Bumper Side Support Bracket
Description:
Front bumper side support bracket, mounts to the battery box to support the bumper. Fits left or right.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-135-01/L – Front Bumper Side Support L Bracket
Description:
Front bumper side support L bracket. Fits left or right.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-155-20 – T-Screw for Bumper Moulding, for Wide S-Trim, Front or Rear
Description:
T-screw for securing the bumper decorative moulding. For wide S-trim, front or rear. Yellow zinc galvanised. Supplied each, 8 required per vehicle.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: 911
901-505-157-00 – Bumper End Cap, Front Left
Description:
Front bumper end cap for the left side.
Matt anodised finish.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-158-00 – Bumper End Cap, Front Right
Description:
Front bumper end cap for the right side.
Matt anodised finished.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-251-21 – Bumper End Cap, Rear Left
Description:
Rear bumper end cap for the left side.
Matt anodised finish.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-251-21/C – Bumper End Cap, Rear Left, Chrome
Description:
Rear bumper end cap for the left side.
Chrome finish.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-252-21 – Bumper End Cap, Rear Right
Description:
Rear bumper end cap for the right side.
Matt anodised finish.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-252-21/C – Bumper End Cap, Rear Right, Chrome
Description:
Rear bumper end cap for the right side.
Chrome finish.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-405-51 – Rubber Insert for Front Bumper, Wide
Description:
- Wide S model version
- German OEM quality
- Designed for the front bumper trim strip
This wide-version front bumper trim is a rubber protection strip for Porsche 911 F models with S trim from 1969 to 1973. It fits into the front bumper trim strip and provides a clean, original look. Made to OEM standards, it offers durability and a precise fit.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-505-417-51 – Rubber Insert for Rear Bumper Wide
Description:
Wide rubber insert for the rear bumper of models with reflector. Fits left or right, 2 required per vehicle.
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Notes:
Additional Vehicle Info: 911,912
901-505-497-20 – Rear Bumper Centre Panel Seal
Description:
Rear bumper centre panel seal.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-901-21 – Front Bumper Overrider Rubber
Description:
Front bumper overrider rubber to fit left or right.
To fit:
911 1965-1973
912 1965-1969
Does not fit USA Spec models with solid rubber bumper guards.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-901-21/R – Bumper Overrider Rubber, Front
Description:
- Manufactured to OE standards
- Fits left or right side
- Not suitable for USA Spec models with solid rubber bumper guards
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-903-21 – Bumper Overrider Rubber Rear
Description:
Rear bumper overrider rubber to fit left or right.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-505-904-00 – Rear Bumper Lower Valance Kit, Polished
Description: Rear bumper lower valance kit, polished. 3 piece set.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-511-010-20 – Bonnet
Description:
Bonnet for early long nose type 911.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-511-051-21 – Bonnet Catch, Front Upper
Description:
Front upper bonnet catch.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-511-052-20 – Bonnet Catch, Front Lower
Description:
Front lower bonnet catch.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-511-073-21 – Release Cable for Bonnet or Engine Lid
Description:
Bonnet or engine lid release cable.
To fit:
911 1965-1983 FRONT and REAR
912 1965-1969 FRONT and REAR
911 1984-1989 REAR only
911 (930) 1975-1983 FRONT and REAR
911 (930) 1984-1989 REAR only
911 (964) 12/1988-07/1990 REAR only
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 911,912,912E,930,964
901-511-791-21G – Rubber Washer
Description:
- Various uses, see below
- All Porsche Genuine Parts are covered by a limited 2-year warranty
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-511-901-02 – Bonnet Seal
Description:
- Keeps water & debris out of luggage compartment
- Reduces hood squeaks & wind noise
- 24-month unlimited mileage warranty
This high-quality 2-part bonnet seal is designed for a precise OE-style fit on 911 and 912 F models. Its heat-resistant construction helps keep water and airborne debris out of the luggage compartment, while reducing squeaks and wind noise for a cleaner, quieter drive. Includes a 24-month unlimited mileage warranty.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-512-010-23 – Engine Lid Rear
Description:
Rear engine lid with hole for number plate light. To fit short wheel base models.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-512-036-20-GRV – Engine Lid Hinge, Right
Description:
Engine lid hinge, right.
To fit:
911 1965-1989
912 1965-1969
911 (930) Turbo 1975-1977
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977)
Additional Vehicle Info: 911,912,912E,930
901-512-052-00 – Engine Lid Catch Lower
Description:
Lower catch for the engine lid.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994)
Additional Vehicle Info: 911,912,912E,930,964
901-512-471-20G – Collar Bolt for Engine Lid Hinge
Description:
- 2 required per vehicle
- All Porsche Genuine Parts are covered by a limited 2-year warranty
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-512-901-00 – Engine Lid to Body Seal
Description:
Engine lid to body seal.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-521-016-00 – Seat Rail Support, Stainless Steel
Description:
- Rust-resistant stainless steel for long-term durability
- Direct-fit OE replacement, fits left or right
- Guaranteed fitment with a Limited Lifetime Warranty
- No longer available from Porsche
Compatible Vehicles: - 911 (1969,1970,1971,1972) - 912 (1969)
Additional Vehicle Info: 911,912
901-521-017-00 – Seat Rail Support, Left, Stainless Steel
Description:
- Rust-resistant stainless steel for long-term durability
- Direct-fit OE replacement restores factory function
- Guaranteed fitment with a Limited Lifetime Warranty
- No longer available from Porsche
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-521-018-00 – Seat Rail Support, Right, Stainless Steel
Description:
- Rust-resistant stainless steel for long-term durability
- Direct-fit OE replacement restores factory function
- Guaranteed fitment with a Limited Lifetime Warranty
- No longer available from Porsche
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-521-193-00 – Seat Headrest Guide Trims, Set, Black
Description:
Set of 4 seat headrest guide trims in black.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-521-193-00/B – Seat Headrest Guide Trims, Set, Brown
Description:
Set of 4 seat headrest guide trims in brown.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-531-005-21 – Door, Complete, Left
Description:
Complete door shell, inner and outer, left.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-531-006-21 – Door, Complete, Right
Description:
Complete door shell, inner and outer, right.
Compatible Vehicles: - 911 (1965,1966,1967,1968) - 912 (1965,1966,1967,1968)
Additional Vehicle Info: 911,912
901-531-031-20 – Door Hinge Kit for Left or Right
Description:
Door hinge kit for left or right.
Set includes both hinges for one door, does not include mounting bolts.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930
901-531-073-00 – Interior Door Handle, Left
Description:
Interior door handle, left.
- Manufactured of high-quality polymer materials to withstand UV exposure and intense cabin heat
- 24 month unlimited mileage warranty
- Guaranteed fitment
- Replace that broken factory door handle for passenger convenience and safety
- Direct-fit OE replacement design restores factory interior door handle appearance and function
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-531-074-00 – Interior Door Handle, Right
Description:
Interior door handle, right.
- Manufactured of high-quality polymer materials to withstand UV exposure and intense cabin heat
- 24 month unlimited mileage warranty
- Guaranteed fitment
- Replace that broken factory door handle for passenger convenience and safety
- Direct-fit OE replacement design restores factory interior door handle appearance and function
Compatible Vehicles: - 911 (1969,1970,1971,1972,1973) - 912 (1969)
Additional Vehicle Info: 911,912
901-531-093-23 – Door Seal, Original Style, Coupe
Description:
Door aperture seal for Coupe models only. Left or right.
Original style.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973) - 912 (1965,1966,1967,1968,1969)
Additional Vehicle Info: 911,912
901-531-305-20 – Door Hinge Pin
Description:
Door hinge pin. Sold each, 2 required per door.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 911,912,912E,930,964,993
901-531-305-20/KIT – Door Hinge Pin Kit
Description:
- Eliminates door rattles and creaks
- OE dimensions for a perfect fit
- 24 Month Unlimited Mileage Warranty
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 911,912,912E,930,964,993
901-531-311-20 – Door Hinge Bush
Description:
Door hinge bush (brass). 4 required per door. Supplied individually.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 911,912,912E,930,964,993
901-531-391-20 – Door Hinge Shim
Description:
Door hinge shim/plate, tin. Fitted between the door hinge and A pillar, 1 required per door hinge, 4 per vehicle.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 964 (1989,1990,1991,1992,1993,1994) - 993 (1994,1995,1996,1997,1998)
Additional Vehicle Info: 911,912,912E,930,964,993
901-531-481-22 – Guide for Door Lock Knob Black
Description:
Guide for the door lock knob in black. Will fit both left and right side.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976)
Additional Vehicle Info: 911,912,912E,930
901-531-631-20 – Door Handle Seal Small
Description:
Door handle seal.
This seal is located at the front of the door handle and is the smaller one of the two.
Compatible Vehicles: - 911 (1965,1966,1967) - 912 (1965,1966,1967)
Additional Vehicle Info: 911,912
901-531-632-20 – Door Handle Seal Large
Description:
Door handle seal.
This seal is located at the rear of the door handle and is the larger one of the two.
Compatible Vehicles: - 911 (1965,1966,1967) - 912 (1965,1966,1967)
Additional Vehicle Info: 911,912
901-531-632-21 – Door Handle Seal Large
Description:
Door handle seal.
This seal is located at the rear of the door handle and is the larger one of the two.
Compatible Vehicles: - 911 (1968,1969) - 912 (1968,1969)
Additional Vehicle Info: 911,912
901-531-671-21 – Door Lock Knob Black
Description:
Door lock knob in black. Will fit both the left and right side.
Compatible Vehicles: - 911 (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - 912 (1965,1966,1967,1968,1969) - 930 (1975,1976)
Additional Vehicle Info: 911,912,912E,930
901-531-701-01 – Door Striker Plate, Left
Description:
Compatible Vehicles: - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - 911 (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930,Karmann Ghia
901-531-701-31 – Door Striker Repair Kit
Description:
Door lock striker repair kit, milky white. Fits left or right, 1 required per door.
Compatible Vehicles: - 911 (1966,1967) - 912 (1966,1967)
Additional Vehicle Info: 911,912
901-531-702-01 – Door Striker Plate, Right
Description:
Compatible Vehicles: - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - 911 (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - 912 (1966,1967,1968,1969) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)
Additional Vehicle Info: 911,912,912E,930,Karmann Ghia
Replies have been locked on this page!