yuliiatest
yuliiatestKnowledge BaseFitment
FAQs Knowledge Base
oranges Fitment
Related Articles
Properties
Tags imported-from-json
Table of Contents

Fitment #159

AC1296409 – Weber Twin 40 IDF Carburettor Kit, Twin Port

Description:

  • Perfect blend of fuel economy and performance.
  • 28mm venturis enhance port velocity and engine torque.
  • Includes 356 aluminum manifolds, air filter hardware, and cross bar linkage.

The Weber 40 IDF carburettor is renowned for its exceptional fuel efficiency and performance. Equipped with 28mm venturis, these carburettors provide a superb balance of fuel economy and power, making them ideal for smaller engines like 1600cc and 1776cc.

Designed to fit comfortably under the engine deck lid of VW bugs, buses, and square backs, the 40 IDF carburettors improve port velocity and enhance engine torque. Our complete kits include high-quality 356 aluminium alloy manifolds, air filter hardware, and a cross bar linkage, ensuring precise throttle control and consistent adjustments between service intervals. Please note that velocity stacks are not included.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976)

Notes:

30HP style fan shroud is required to give clearance for the carburettors

For optimum performance this kit should be setup on a rolling road. 

Air correction jet - 2.00

Emulsion tube - F-11

Main tube - 1.15

Pump jet - .50

Idle jet - 0.55 (drilled)

Venturi - 28mm

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split

AC1296410 – Weber Twin 40 IDF Carburettor Kit Type 4

Description:

  • Excellent fuel economy combined with enhanced performance
  • Fits under the engine lid of VW Beetles, buses, and square backs
  • Precision throttle control with top-quality components

Elevate your Type 4 engine performance with the Weber Twin 40 IDF Carburettor Kit, designed for 1700-2000cc engines. Known as the mileage champ, these carburettors come factory-equipped with 28mm venturis, delivering an impressive balance of fuel efficiency and power. This kit fits comfortably under the engine lid and enhances the overall driving experience.

Featuring high-quality 356 aluminium alloy manifolds, air filter hardware, and Cross Bar Linkage, this kit ensures precise throttle control and maintains adjustments between service points. Complete kits are available to accommodate most Dual Port VW and Porsche applications. Key specifications include an air correction jet of 2.00, emulsion tube F-11, main jet 1.15, pump jet 0.50, idle jet 0.55 (drilled), and a 28mm venturi. Upgrade your engine’s responsiveness and torque with the Weber Twin 40 IDF Carburettor Kit today!

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:

For optimum performance this kit should be setup on a rolling road.

Additional Vehicle Info: 912,912E,914,T2 Bay

AC1296427 – Weber Twin 34 ICT Carburettor Kit, Single Port

Description:

  • Suited for stock and mild performance 1300-1600cc engines
  • Improves smoothness, power delivery, and engine bay aesthetics
  • Assembled by CB Performance for optimal quality and fit

The Weber 34 ICT Carburettor Kit, assembled by CB Performance, is an excellent upgrade for 1300-1600cc single port engines. Ideal for stock and mildly tuned setups, this dual carburettor kit provides smoother running, enhanced power delivery, and a more balanced, cleaner engine bay. It's a perfect addition for those seeking performance gains and refined drivability.

Pair this kit with a free-flowing exhaust system for even better performance improvements. Key features include an air correction jet (1.60), F-78 emulsion tube, drilled main jet (1.35), pump jet (0.50), and drilled idle jet (0.60), ensuring reliable performance in any build.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split

AC1296427F – Weber 34 ICT & ICH Carburettor Float

Description:

Weber 34 ICT & ICH Carburettor Float

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1296428 – Weber Twin 34 ICT Carburettor Kit, Twin Port

Description:

  • Enhances bottom-end torque and mid-range power
  • Complete kit includes linkage, manifolds, and air filter package
  • Designed for improved fuel economy without sacrificing performance

The CB Performance Weber 34 ICT Carburetor Kit is an excellent choice for those looking to boost the performance of their engine. This kit features a single throat carburetor that significantly enhances bottom-end torque and mid-range power, all while maintaining impressive fuel economy.

Included in the kit are CB Performance's cross bar throttle linkage and a comprehensive air filter package, ensuring seamless installation and operation. Key specifications include an air correction jet of 1.60, F-78 emulsion tube, drilled main jet (1.35), pump jet (.50), and drilled idle jet (.60), providing reliable performance and tuning flexibility. Upgrade your engine with this efficient carburettor kit for a noticeable improvement in power and efficiency.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1296429 – Weber Twin 34 ICT Carburettor Kit, Type 4

Description:

  • Enhances bottom end torque and mid-range power.
  • Includes CB Performance cross bar linkage and air filter.
  • Features precision jets for optimal performance.

Boost your Type 4 engine (1700-2000cc) with our Weber Twin 34 ICT Carburetor Kit. This high-performance kit is designed to improve bottom end torque and mid-range power, making your engine more responsive and efficient.

The kit comes complete with CB Performance's cross bar throttle linkage and an air filter package for easy installation. Key components include a 1.60 air correction jet, F-78 emulsion tube, 1.35 main jet (drilled), 0.50 pump jet, and a 0.60 idle jet (drilled), all tailored to enhance your engine's performance and reliability.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982)

Notes:

This kit will require setting up on a rolling road for optimum performance. To improve low end running and idle a 1/2'' balance pipe should be added between the inlet manifolds.

Additional Vehicle Info: 912,912E,914,T25,T2 Bay

AC1296446 – Dual Weber 40 IDF Kit Twin Port

Description:

  • Fits under the engine lid for a clean installation
  • Includes CB's Super Cross Bar Linkage for smooth operation
  • Comes with low-profile air filters for enhanced airflow
  • Boosts performance with instant double/double barrel capability

Unlock your engine's potential with the Weber 40IDF Carburettor Kit, designed for optimal performance while maintaining a sleek profile under your engine lid. This kit includes CB's Super Cross Bar Linkage, ensuring precise throttle response and effortless operation.

Paired with low-profile air filters, the kit enhances airflow, maximising the performance benefits of the double/double barrel setup. Experience improved power and efficiency, making it a perfect upgrade for enthusiasts looking to elevate their driving experience.

Compatible Vehicles: - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

AC1297016 – Carburettor Weber 34 ICT

Description:

  • Weber 34 ICT carburettor for dual carb applications
  • Common replacement for EMPI Dual 34 ICT kits
  • Enhances performance while maintaining fuel economy
  • Sold as a single carburettor

The Weber 34 ICT carburettor is a high-performance option commonly used in VW dual carburettor setups. It is a direct replacement for most EMPI Dual 34 ICT kits, offering improved engine performance without compromising fuel economy.

Sold individually, this carburettor is an excellent upgrade for those looking to boost their VW's performance, ensuring smoother throttle response and better fuel efficiency. Perfect for enthusiasts looking to improve their engine setup with reliable, quality parts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC12970622 – EMPI Single 32/36 EPC Progressive Carburettor Kit, Type 1 Engine

Description:

  • Designed for stock and mildly tuned Twinport engines up to 1600cc
  • Complete kit includes carburettor, manifold, air filter, linkage, and more
  • Compatible with single port engines using EMPI end castings (AC1293237)

The EMPI 32/36 Progressive Carburettor Kit is an excellent upgrade for stock and mildly tuned Twinport engines up to 1600cc. This complete kit includes everything you need to boost your engine’s performance: a carburettor with an electric choke, manifold center section, air filter, linkage kit, fuel line, and all necessary hardware. For single-port engines, simply add the EMPI single port end castings (part number AC1293237).

For optimal performance, the carburettor will need to be set up on a rolling road. Early Beetles with engine lids may require deck lid stand-offs for clearance. Additionally, minor adjustments to the fan housing and manifold may be needed during installation. Fitted with a vacuum port for distributor connection, this carburettor comes with factory-fitted jets for smooth, reliable operation.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,T2 Split

AC12970634 – EMPI Single 32/36 EPC Progressive Carburettor Kit with Bubble

Description:

  • Perfect for stock and mildly tuned engines
  • Includes electric choke for easy starting
  • Complete kit with all necessary components

Upgrade your engine's performance with the EMPI EPC 32/36 Progressive Carburetor Kit. Designed specifically for stock and mildly tuned setups, this kit enhances throttle response and overall efficiency. It features a high-quality carburetor with an electric choke, ensuring smooth starts in any weather.

The kit comes complete with everything you need, including a manifold centre section, air filter, linkage kit, fuel line, and all necessary hardware for installation. An engine lid bubble is also included to provide proper carburettor clearance, though some cutting of the engine cover is required for a perfect fit. Elevate your driving experience with this reliable and performance-driven solution.

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Primary & Secondary Jets fitted as standard are:

Main: 137 / 140

Air: 165 / 160

Idle: 60 / 50

Additional Vehicle Info: Type 3

AC12970670 – EMPI Single 32/36 EP Progressive Carburettor Kit, Type 4 Engine

Description:

  • Suited for 1700-2000cc stock and mildly tuned engines
  • Complete kit includes carburettor, electric choke, air filter, and linkage
  • Features a vacuum port for distributor connection

The EMPI EPC 32/36 Progressive Carburettor Kit is a versatile upgrade for Type 4 engines between 1700-2000cc, ideal for both stock and mildly tuned setups. This comprehensive kit comes with a carburettor featuring an electric choke, a manifold centre section, air filter, linkage kit, fuel line, and all the hardware needed for a straightforward installation.

For optimal performance, a rolling road setup is recommended. When fitting the kit to a T25, you may need to trim the engine lid sound deadening or use a thinner air filter (AC1298809). With standard-fitted primary and secondary jets, this carburettor also includes a vacuum port for optional connection to a vacuum distributor, ensuring reliable, efficient operation.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:This kit will not function correctly with an OE vacuum advance distributor. Update your engine with a 009 or 050 electronic ignition and a new coil

Additional Vehicle Info: 914,T25,T2 Bay

AC1297317 – EMPI Twin 40 HPMX Carburettor Kit, Twin Port

Description:

  • Precision tuning with one butterfly per cylinder
  • Proven power increase over Weber IDF models
  • Complete kit for performance engines over 1800cc

Elevate your engine’s performance with the EMPI Twin 40mm HPMX Carburettor Kit, ideal for both street and strip applications. These carburettors feature a unique design with one butterfly per cylinder, allowing for exceptional tuning precision and enhanced power output. Compared to Weber IDF carburettors, the HPMX versions offer notable improvements, as confirmed by Hot VWs magazine, which reported a 7.35 BHP increase on an 1835cc engine.

This complete kit includes everything needed for installation: carburettors, manifolds, hex bar linkage, air filters, fuel hose, and all necessary hardware. Designed for engines over 1800cc, it comes fitted with 28mm venturis, a variety of jets, and F11 emulsion tubes to ensure optimal performance. Please note that these carburettors do not have chokes, focusing instead on delivering precise power and efficiency.


Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976)

Notes:

30HP style fan shroud is required to give clearance for the carburettors

For optimum performance this kit should be setup on a rolling road. 

Fitted with:

28mm Venturis

130 Main Jets

52 Idle Jets

200 Air correction

550 Ex. Pump Jets

50 Accel Pump Jets

F11 Emulsion Tubes


Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split

AC1297317A – EMPI Ultra Twin 40 HPMX Carburettor Kit, Twin Port

Description:

  • Complete kit for engines over 1600cc
  • Includes twin carburettors and hardware
  • Enhances throttle response and power
The EMPI Ultra Twin 40mm HPMX Carburettor Kit is the ultimate upgrade for performance engines exceeding 1600cc. This all-inclusive kit comes with twin carburettors, new style offset manifolds, the latest Ultra hex bar linkage, air filters, fuel hose, and all necessary hardware for a straightforward installation.

Equipped with 28mm venturis, 115 main jets, 52 idle jets, 200 air correction jets, .55 accelerator exhaust jets, and .50 accelerator pump jets, along with F11 emulsion tubes, this kit is designed for high performance and reliability. Enjoy improved throttle response and power delivery, making it a top choice for enthusiasts. Compared to Weber IDF carburettors, the HPMX versions offer significant improvements, with Hot VWs magazine noting a 7.35 BHP increase on an 1835cc engine. The offset manifolds ensure the hex bar linkage runs parallel with the fan housing for enhanced throttle response.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976)

Notes:

30HP style fan shroud is required to give clearance for the carburettors

For optimum performance this kit should be setup on a rolling road. 



Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split

AC1297319 – EMPI Twin 44 HPMX Carburettor Kit, Twin Port

Description:

  • Designed for performance engines over 1800cc
  • Complete kit with carburettors, manifolds, linkage, and hardware
  • Proven to deliver more power than Weber IDF carburettors

The EMPI Twin 44mm HPMX Carburettor Kit is the ideal choice for high-performance engines over 1800cc, whether for street use or the strip. Featuring one butterfly per cylinder, these carburettors allow precise tuning and significant power gains. Engineered as an improved version of the Weber IDF, the HPMX was tested by Hot VWs magazine and produced 7.35 BHP more on an 1835cc engine, showcasing its power advantage.

Supplied as a complete kit with carburetors, manifolds, hex bar linkage, air filters, fuel hose, and all necessary hardware, this setup is ready to go. Although the carburetors do not feature chokes, they are equipped with 36mm venturis, 135 main jets, 55 idle jets, 200 air correction jets, 550 ex. pump jets, 50 accel pump jets, and F11 emulsion tubes, ensuring high performance and compatibility with Weber spare parts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

30HP style fan shroud is required to give clearance for the carburettors

For optimum performance this kit should be setup on a rolling road. 


Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1297319A – EMPI Twin 44 HPMX Ultra Carburettor Kit Twin Port

Description:

  • Complete kit for twin port performance engines over 1800cc
  • Includes carburettors, offset manifolds, and ultra hex bar linkage
  • Supplied with air filters, fuel hose, and all installation hardware

Elevate your engine's performance with the EMPI Twin 44mm HPMX Carburettor Kit, designed specifically for twin port engines over 1800cc. This comprehensive kit includes everything you need, featuring high-quality carburettors, new style offset manifolds, ultra hex bar linkage, air filters, fuel hose, and all necessary hardware for easy installation.

The kit is fitted with 36mm venturis, 135 main jets, 55 idle jets, 200 air correction jets, 50 exhaust pump jets, 50 accelerator pump jets, and F11 emulsion tubes, ensuring optimal performance and efficiency. Upgrade your setup and experience enhanced power and throttle response with this top-tier carburettor kit.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976)

Notes:

30HP style fan shroud is required to give clearance for the carburettors

For optimum performance this kit should be setup on a rolling road. 


Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split

AC1297347 – EMPI Twin 40 HPMX Carburettor Kit, Type 4

Description:

  • Designed for performance engines from 1700-2000cc
  • Complete kit with carburettors, manifolds, linkage, air filters
  • Supplied with detailed installation instructions and EMPI packaging

The EMPI Twin 40mm HPMX Carburettor Kit is tailored for high-performance 1700-2000cc Type 4 engines, offering a robust upgrade in power and throttle response. This complete kit includes twin carburettors, manifolds, air filters, linkage, fuel hose, and all necessary hardware for installation. With its detailed installation instructions, setting up is straightforward and hassle-free.

For best results, a rolling road setup is recommended to optimise performance. Please note that the kit does not include idle vent tubes or velocity stacks, allowing for further customisation based on your engine’s specific requirements.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:

This kit will not function correctly with an OE vacuum advance distributor. Update your engine with a 009 or 050 electronic ignition and a new coil.

The carburettors feature:
28mm Venturis
115 Main Jets
52 Idle Jets
200 Air correction
550 Ex. Pump Jets
50 Accelerator Pump Jets
F11 Emulsion Tubes

Additional Vehicle Info: 912,914,T25,T2 Bay

AC1297401 – EMPI Twin 34 EPC Carburettor Kit, Single Port

Description:

  • Ideal for stock and mild performance engines
  • Delivers twin carb performance with good fuel economy
  • Complete kit includes carburettors, manifolds, linkage, and hardware

The EMPI 34 EPC Carburettor Kit is a great upgrade for 1300-1600cc single port engines, offering the performance of twin carburettors while maintaining reasonable fuel efficiency. Suited for both stock and mildly tuned engines, this kit delivers improved throttle response and smoother power delivery without sacrificing drivability.

This complete kit includes 34mm single barrel carburettors, manifolds, air filters, fuel lines, linkage, and all necessary hardware for installation. Although these carburettors do not feature an electric choke, they provide reliable and consistent performance for a more responsive driving experience.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

This kit will require setting up on a rolling road for optimum performance. To improve low end running and idle a 1\/2'' balance pipe should be added between the inlet manifolds.


Fitted with:

130 main jets

55 idles jets

160 air correctors

1.75 needles

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC129741 – Air Filter Chrome/Foam Pancake Style

Description:

  • Stylish chrome top and base with a mesh filter guard
  • Foam element offers superior filtration compared to paper filters
  • Designed for standard 52mm Solex carburettors 

Brighten up your engine bay with this Chrome 'Pancake' Style Air Filter, designed to enhance both the look and performance of your aircooled VW. With a sleek chrome finish and a foam air filter element, it maximises airflow into your carburettor while offering more efficient filtration than paper filters.

This 2" tall filter fits standard Solex carburettors with 52mm throats and serves as an excellent replacement for rusty or missing original filters. It includes a mesh filter guard and features a 1/2" hose fitting underneath, ideal for connecting to your oil breather system. This cost-effective upgrade not only adds a touch of shine but also ensures your engine runs at its best.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1297411 – EMPI Twin 34 EPC Carburettor Kit, Twin Port

Description:

  • Ideal for stock and mild performance engines
  • Includes manifolds, air filters, and fuel lines
  • No electric choke for simplicity and reliability

The 34 EPC Carburettor Kit is a perfect upgrade for 1300-1600 Twinport engines, offering enhanced performance for both stock and mildly tuned setups. This kit is designed for ease of installation and optimal engine efficiency, providing all the necessary components to fit your engine, including single-barrel 34mm carburettors, manifolds, air filters, fuel lines, and linkage hardware.

Engineered without an electric choke, these carburettors offer a more straightforward design, ensuring reliability and ease of use. Whether you're looking to improve throttle response or simply refresh your engine's fueling system, this 34 EPC kit delivers dependable performance and durability, making it an excellent choice for VW enthusiasts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

This kit will require setting up on a rolling road for optimum performance. To improve low end running and idle a 1\/2'' balance pipe should be added between the inlet manifolds. If fitting to a 1641cc engine 145 main jets should be fitted and we recommend going for the Balance Pipe and Jet Install Kit (AC129400) as this will give you the best performance from your Carburettors.


Fitted with:

130 mains

55 idles

160 air correctors

1.75 needles

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC129742 – Chrome Air Filter, 3" Tall Medium Profile, 5 1/2" Diameter, High Flow

Description:

  • Compact 5.5" x 3" design for easy fit on stock VW carburettors.
  • High-flow gauze filter enhances engine performance.
  • Chrome finish adds a polished, classic touch to your setup.

Enhance your engine's performance and appearance with this round high-flow chrome air cleaner. Designed specifically to fit stock VW carburettors, its 5.5-inch diameter and 3-inch height make it a perfect choice for compact spaces. The included gauze filter provides superior airflow and filtration, improving your engine's efficiency while protecting it from debris.

This air cleaner is built for durability and style, featuring a polished chrome finish that complements vintage and custom builds alike. Easy to install and maintain, it offers a simple way to upgrade your setup with noticeable performance and aesthetic benefits

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC129781 – Air Filter Chrome/Paper Pancake Style

Description:

  • 1.5" tall pancake air filter for stock carburettors
  • Chrome base and top with paper filter element
  • Includes 1/2" hose barb for oil filler/breather connection

This 1.5-inch tall pancake-style air filter is designed for use on stock carburettors, offering a sleek, low-profile look while delivering excellent filtration. Featuring a durable chrome base and top, it’s both stylish and functional, perfect for enhancing your engine bay's appearance.

The filter comes with a quality paper element for optimal air intake and is fitted with a 1/2" hose barb to connect to your standard oil filler or breather system, ensuring proper ventilation. A perfect upgrade for any classic car enthusiast seeking both performance and style.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

Overall Diameter - 165mm
Filter height - 40mm
Full height including Bore mount - 60mm
Bore size - 50mm diameter 
breather connection - 12mm OD

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC12978E – Spare Paper element for Chrome Pancake Filter

Description:

  • Fits AC129781 chrome pancake filter

  • Dimensions: ID 130mm, OD 160mm, Height 38mm

  • Ensures optimal filtration for engine performance

This spare paper element is designed to fit the AC129781 chrome pancake filter, providing reliable filtration to maintain engine efficiency. With an internal diameter of 130mm, an outer diameter of 160mm, and a height of 38mm, it fits perfectly for easy replacement.

Keep your engine running smoothly with this high-quality filter element, ensuring clean airflow and optimal performance every time.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1298714 – Air Filter oval for IDF/DRLA Carburettor

Description:

3 1/4'' tall oval air filter assembly for use on IDF, DRLA, HPMX carburettors. Supplied with a cotton gauze filter and a chrome top and bottom.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1298714/KIT – Air Filter oval for IDF/DRLA/HPMX Carburetors

Description:

  • Oval air filter assembly, 3 1/4" tall
  • Fits IDF, DRLA, and HPMX carburetors
  • Includes cotton gauze filter with chrome top and bottom

This air filter assembly is designed for use with IDF, DRLA, and HPMX carburetors. It helps improve airflow while keeping dirt and debris out of your engine.

The filter features a durable cotton gauze element for efficient filtration. The chrome top and bottom add a clean, simple finish to the assembly.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1298734 – Air Filter Element for Oval 3 1/2''

Description:

Spare air filter element for part number AC1298805. It is an oval shaped filter and is 3 & 1/2'' tall and for use on Weber IDF, Dellorto DRLA and EMPI HPMX carburettors.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:measurements are 4.5 X 7 X 3.5 

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1298736 – Spare Air Filter Element for Oval 1 3/4''

Description:

Spare air filter element for part number AC1298714. It is an oval shaped filter and is 1 & 3/4'' tall and for use on IDF, Dellorto and HPMX carburettors.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1298764 – Air Filter Chrome/mesh 34bhp 1200-1600cc

Description:

Air filter for use on all 34hp/1200cc - 1600cc engines with a standard carburettor fitted. Supplied with a foam and mesh element and chrome louvered dome-style cover.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,T2 Split

AC1298801 – Air filter Kit for EMPI/Kadron Carburettors

Description:

  • Air filter kit for EMPI, Kadron, and Solex H40/44 carburettors
  • Supplied in pairs with chrome bases, tops, and new centre pins
  • Cotton gauze filters for enhanced airflow and performance

This air filter kit is specifically designed to fit EMPI, Kadron, and Solex H40/44 carburettors, offering an easy and effective way to upgrade your carburettor setup. Supplied in pairs, the kit includes chrome bases, tops, and new center pins, allowing you to refresh and modernize your Kadrons.

The cotton gauze filters provide superior filtration and improved airflow, optimizing engine performance while adding a clean, polished look to your engine bay. Ideal for enthusiasts looking to enhance both the function and appearance of their carburettor system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1298802 – Spare Air Filter Element for EMPI/Kadron Carburettors

Description:

Spare air filter element to fit AC1298801 air filter for EMPI/Kadron carburettors.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1298805 – Air Filter Chrome for DRLA/IDF/HPMX 1 3/4'' Tall

Description:

Rectangular 1 & 3/4'' tall air filter for use on IDF, Dellorto and HPMX carburettors. Supplied with a cotton gauze filter and a chrome top and bottom.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC1298806 – Air Filter for Weber DGV/DGAV/DGEV 1 3/4'' Tall

Description:

Air filter for Weber DGV/DGAV/DGEV 1 3/4'' Tall

An ideal filter if you are looking to gain some height clearance 

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T25,T2 Bay,T2 Split,Type 3

AC1298809 – Air Filter Rectangular for Weber 32/36 - 1 3/4'' Tall

Description:

  • Rectangular air filter kit for Weber 32/36 and EMPI EPC carburettors
  • Chrome top, base, and clips for a durable, stylish finish
  • 44mm Tall with high-performance cotton gauze element

This rectangular air filter kit is specifically designed for use on Weber 32/36 progressive and EMPI EPC carburettors. It features a chrome top, base, and clips, ensuring a robust and visually appealing upgrade to your engine bay. The 1-3/4'' Tall filter provides a low-profile design, ideal for tight spaces.

Equipped with a high-performance washable cotton gauze element, this filter delivers improved airflow and filtration, optimizing your engine's performance. It’s a perfect choice for enthusiasts seeking a combination of functionality and style for their carburettor setup.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - T25 (1980,1981,1982,1983)

Notes:

 comes with Clips, Bolts, Washers & Hose Mounts

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split

AC1298809A – Air Filter for Weber DGV/DGEV

Description:

Rectangular air filter kit designed for use on weber 32/36 progressive carburettors and EMPI EPC carburettors. Supplied with a chrome top, base and clips. The filter has a cotton gauze element

Dimensions

65mm High

172mm Length

115mm Width

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Can be a tight fit under engine lids particularly on a T1 with pre 67 engine lid, stand offs may be required. It will not fit under the rain tray on a Karmann Ghia. If necessary see AC1298809 for a slightly smaller alternative.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1299002 – Air Filter Cone Style for 34 PICT ICT/EPC/FRD

Description:

  • Cone-style air filter with chrome top
  • Cotton gauze element for superior airflow
  • Fits carburettors with a 52mm (2 1/16") opening

This cone-style air filter, featuring a high-flow cotton gauze element, is designed for use with Weber 34 ICT and Dellorto FRD carburettor's. Its universal design allows it to fit any carburettor with a 52mm (2 1/16") opening, making it a versatile solution for various setups.

With a sleek chrome top, this filter not only enhances performance by providing better airflow but also adds a polished look to your engine bay. It's the ideal choice for those seeking both style and efficiency in their carburettor system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1299004 – Air Filter Pod Style for Kadron/Solex Carburettor

Description:

Pod style air filter that comes supplied with a securing clip to fit. To be uses with engines fitted with a stock, Brosol 30/31, EMPI/Kadron/Solex, Type 3/ Type 4 carburettor(s) or any other carburettor/intake with a 67mm (2 5/8") outer diameter.

The filter does not have a breather inlet but this can be added.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC129902 – Inlet Manifold Boots Red Urethane

Description:

  • Uprated replacement for stock rubber boots

  • Requires original-style jubilee clips to fit

  • Supplied individually – 2 required per engine

This red urethane inlet manifold boot is a high-performance upgrade from the original rubber type. Designed for durability and resistance to heat and wear, it ensures a reliable seal between the inlet manifold and end castings.

A split or perished boot can cause unwanted air leaks, leading to irregular engine running. If your current boots show signs of damage, replace them immediately. Supplied individually – two boots are required per engine. Use with original jubilee clips for correct installation.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1299024 – Air Filter Rectangular for DRLA/IDF 2 1/2'' Tall

Description:

Rectangular 2 & 1/2'' tall air filter for use on Weber IDF, Dellorto DRLA and EMPI HPMX carburettors. Supplied with a cotton gauze filter and a chrome top and bottom.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC1299127 – Air Filter - Chrome Pancake Style

Description:

A pair of chrome pancake filters with foam element. One has a breather pipe inlet for use with an oil filter/breather

Compatible Vehicles: - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Type 3

AC1299128 – Air filter for Weber ICT Carburettors

Description:

Air filter for Weber ICT carbs

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Notes:

52mm Fitment 

Additional Vehicle Info: T25,T2 Bay,Type 3

AC129940 – Bell Crank Linkage Return Spring

Description:

Return Spring for CSP Bell crank Linkage.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC129941 – Bell Crank Linkage for Type 1 Porsche Style Fan, IDF/DRLA/HPMX

Description:

CSP stainless steel CNC bell crank linkage for use with Porsche style fan conversions. To fit 36-48mm IDF, DRLA and HPMX twin carburettors.

Features:
2 ball bearings for smooth operation
Left and right hand threads on the pull rods
Fits Weber IDF type carburettors
Easy mounting

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

To fit Type 1 engines

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC1299414 – Bell Crank Linkage for Type 4 Porsche Style Fan, IDF/DRLA/HPMX

Description:

CSP stainless steel CNC bell crank linkage for use with Porsche style fan conversions. To fit 36-48mm IDF, DRLA and HPMX twin carburettors.


To fit Type 4 engines only

Features:
2 ball bearings for smooth operation
Left and right hand threads on the pull rods
Fits Weber IDF type carburettors
Easy mounting

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Notes:

To fit Type 4 engines only

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split

AC129942 – Bell Crank Linkage for 36-48mm IDF/DRLA/HPMX

Description:

  • Designed for 36-48mm IDF, DRLA, and HPMX twin carburetors
  • Smooth operation with 2 ball bearings for enhanced performance
  • Features left and right-hand threads on pull rods for easy adjustments

The CSP Stainless Steel CNC Bell Crank Linkage is engineered specifically for T1 upright cooling fan engines, offering a robust solution for connecting your twin carburetors. Compatible with 36-48mm Weber IDF, DRLA, and HPMX carburetors, this linkage ensures optimal throttle response and reliability.

With two ball bearings incorporated into the design, you can expect smooth and efficient operation, reducing wear and tear over time. The pull rods feature both left and right-hand threads, allowing for simple adjustments and easy mounting. Upgrade your carburettor linkage with this high-quality solution for enhanced performance and longevity.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC129944 – Bell Crank Linkage for 34 ICT Carburettors

Description:

  • Designed specifically for Type 1 engines equipped with 34 ICT carburetors
  • Features a black anodized, laser-engraved billet aluminum base
  • Polished stainless steel bell crank with internal roller bearing for smooth operation

The Bell Crank Linkage for 34 ICT Carburetors is the perfect solution for Type 1 engines, providing enhanced performance and ease of use. The base is crafted from black anodized billet aluminum and features laser engraving for durability and style.

The polished stainless steel bell crank is equipped with an internal roller bearing, ensuring smooth throttle operation without the need for additional springs on the carburetors. The arms are laser welded for added strength, while the left and right threaded pushrods simplify synchronization, making installation and adjustment a breeze. Upgrade your setup with this high-quality linkage for improved performance and reliability.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC129945 – Bell Crank Linkage for Kadron Carburettors

Description:

CSP Bell crank linkage for type 1 engines with a stock cooling system. The pushrod design of this linkage gives the big advantage to fit with nearly every manifold on the market. The CNC manufactured and polished stainless steel bell crank has dual internal roller bearings for smooth operation. It has left and right threaded pushrods to allow for easy adjustment.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC129K1411 – Weber Twin 34 ICT Carburettor Kit - Twin Port

Description:

  • Ideal for 1300-1600 Twinport engines; stock or mild performance.
  • Includes 34mm carburettors, manifolds, air filters, and linkage.
  • No electric choke; complete with fuel lines and hardware.

Enhance your 1300-1600 Twinport engine with the Weber 34 ICT carburettor kit, designed for both stock and mildly tuned engines. This comprehensive kit features single barrel 34mm carburettors known for their reliability and simplicity, without the need for an electric choke.

The kit includes everything you need for installation: manifolds, air filters, fuel lines, linkage, and all necessary hardware. Perfect for those looking to improve engine performance while maintaining a straightforward setup.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1971,1972,1973,1974)

Notes:

This kit will require setting up on a rolling road for optimum performance. To improve low end running and idle a 1\/2'' balance pipe should be added between the inlet manifolds. If fitting to a 1641cc engine 145 main jets should be fitted and we recommend going for the Balance Pipe and Jet Install Kit (AC129400) as this will give you the best performance from your Carburettors.


Fitted with:

130 mains

55 idles

160 air correctors

1.75 needles

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay

AC129K1412 – Weber Twin 34 ICT Carburettor Kit, Type 4

Description:

Weber twin 34 ICT carburettor kit for 1700-2000cc Type 4 engines. This kit is suited to stock and mild performance engines and is a great standard replacement for original worn carburettors. These are single barrel 34mm carburettors and provide reasonable fuel economy. These carburettors don't have an electric choke. The kit includes the carburettors, manifolds, cone air filters, fuel lines, hex linkage and hardware to fit.

For optimum performance this kit should be setup on a rolling road. To improve low end running and idle a 1/2'' balance pipe should be added between the inlet manifolds.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:

This kit will not function correctly with an OE vacuum advance distributor. Update your engine with a 009 or 050 electronic ignition and a new coil


Fitted with:

130 main jets

55 idle jets 

160 air correctors

1.75 needle jets

Additional Vehicle Info: 914,T25,T2 Bay

AC129K297 – Weber Single 32/36 Progressive Carburettor Kit, Type 4

Description:

  • Converts twin carb setup to single central unit
  • Ideal for stock and mildly tuned type 4 engines
  • Includes electric choke and complete fitting kit

The Weber 32/36 Progressive Carburettor Kit is designed to simplify your engine's carburetion by converting a stock twin carburettor setup into a single, centrally mounted unit. This kit is perfect for stock and mildly tuned engines, providing a balance between performance and ease of use. The included electric choke ensures smooth starts and reliable operation.

While this setup offers a straightforward solution, it's important to note that winter performance may be slightly reduced due to the manifold design and lack of preheating compared to a twin carb setup like the Weber 34ICTs. The kit comes complete with everything you need for installation, including the carburettor, manifold centre section, air filter, linkage kit, fuel line, and all necessary hardware. This makes it a convenient and effective upgrade for those looking to improve their engine's performance with a single carburettor system.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:

This kit will not function correctly with an OE vacuum advance distributor. Update your engine with a 009 or 050 electronic ignition and a new coil. This carburettor DOES have a vacuum port for connection to a vacuum distributor if required. Rolling road set up will be required for optimum performance. For T25 you will need to trim the engine lid sound deadening or fit a thinner air filter AC1298809


Primary & Secondary Jets fitted

Main: 137 / 140

Air: 165 / 160

Idle: 60 / 50

Additional Vehicle Info: 914,T25,T2 Bay

AC129KN33-2003 – K&N High Flow Panel Air Filter

Description:

K&N air filter, high flow, panel type. Replaces OE part number 021129620.

To fit:
Volkswagen
Baywindow 1975-1979 - 1600-2000 engines including Type 4
T25 - 1.6 CT, CZ, 2.0 CU, CV, 1.9 DF, DG, DH, GW, 2.1 DJ
T25 - 1.9 DG engine up to chassis number 24-F-037 754
Polo Mk2/2f 1982-1994 - 1.3 Digijet NZ, GK, PY, 3F
Porsche
914-4 1.8 1974-1976 carburettor models only
924 2.0 1976-1985

Please note: This will not fit industrial 127 engines or 1974 injection engines. Use part number 039-129-620/A.

K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.

Compatible Vehicles: - T2 Bay (1975,1976,1977,1978,1979) - 914 (1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Polo Mk1/2 (1982,1983,1984,1985,1986,1987,1988,1989,1991,1992,1993,1994) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: 914,924,Polo Mk1/Mk2,T25,T2 Bay

AC133000 – Fuel Filter Chrome and Perspex for 5-6mm Hose

Description:

Fuel filter in chrome and perspex.


Supplied with fixed 6mm (1/4'') hose barbs. This filter fits inline, before the fuel pump. The filter can be removed, washed and re-used.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,T2 Bay,T2 Split,Type 3

AC133002 – Samco Silicone 5mm Breather Hose

Description:

Silicone Breather hose for the vacuum or breather system. 5mm Internal diameter with a 2.5mm wall. This is top quality breather hose made by Samco Sport and finished in Silicone. Sold per meter

It can also be used as washer or coolant hose and is rated to 200 degrees C

Not suitable for fuel or oil mist

Samco coolant hoses connect non-fuel components and pipe work in systems designed to operate in a temperature range from -50°C to a maximum of 180°C. Samco coolant hose is manufactured in the UK by hand from the highest grade silicone rubber formulated specifically for automotive applications. Reinforced with heat resistant fabrics, the Samco range of standard coolant hose is designed to withstand the extreme conditions experienced with contemporary coolant systems; with a proven track record in modern engines. Superb reliability helps reduce maintenance and down time while providing greater engine protection.

All Samco hose kits are supplied with a lifetime warranty to the original purchaser. You will need to complete the warranty form on the box or the form on Samcos website to qualify.
http://www.samcosport.com/warranty/

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - T5 (2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,Transporter T4,Transporter T5,T25,T2 Bay,T2 Split,Type 3

AC141000 – 200mm Sprung 4 Puck Clutch Disc

Description:

Sprung centre puck clutch disc for use with 200mm flywheels. This is the ultimate for grip and hard pull away's

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,T2 Bay,T2 Split

AC141001 – 200mm Solid 4 Puck Clutch Disc

Description:

Solid centre puck clutch disc for use with 200mm flywheels. This is the ultimate for grip and hard pull always. This solid centre type is for race use only.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141003 – 200mm Kush Lock Clutch Disc

Description:

  • Kush lock clutch friction plate designed for performance engines
  • Provides give/slip during engagement to protect the drivetrain
  • Compatible with all Aircooled models using a 200mm flywheel

The Kush lock clutch friction plate is specifically engineered for performance engines, offering enhanced durability and reliability. Its unique design allows for controlled give and slip during engagement, which helps protect the drivetrain from excessive stress and potential damage.

This clutch plate is compatible with all Aircooled models that feature a 200mm flywheel, making it an excellent choice for those looking to enhance their vehicle's performance while ensuring smooth operation. Upgrade your clutch system with this high-quality component for improved drivability and longevity.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141004 – 200mm Metal Woven Clutch Disc

Description:

  • Metal woven clutch friction plate ideal for mild performance engines
  • Suitable as a standard replacement for reliable operation
  • Compatible with all Aircooled models using a 200mm flywheel

The metal woven clutch friction plate is designed to meet the demands of mild performance engines while also serving as a reliable standard replacement. Its robust construction ensures durability and consistent performance, making it an excellent choice for various driving conditions.

This friction plate is compatible with all Aircooled models featuring a 200mm flywheel, providing a seamless fit and dependable engagement. Upgrade your clutch system with this versatile component for enhanced performance and longevity.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141010 – Kennedy 200mm Stage 1 Clutch Pressure Plate, 1700lbs

Description:

  • 1700lbs pressure plate for performance engines up to 130bhp.
  • Compatible with early and late clutch release bearings.
  • Stiffens the clutch; ensure forks and cross shaft bush are upgraded.

The Kennedy 1700lbs clutch pressure plate is engineered for high-performance aircooled engines up to 130bhp, making it ideal for enthusiasts looking to enhance their vehicle's power and responsiveness. Designed to work with both early and late clutch release bearings on all aircooled engines with a 200mm flywheel, this pressure plate offers versatility and reliability.

For those using a late bearing, be sure to remove the centre puck and spring clip for proper installation. Please note, this pressure plate will make your clutch stiffer, so it's crucial to check that your clutch operating forks are in good condition. Additionally, fitting a urethane cross shaft bush is recommended to ensure smooth operation and longevity of your clutch system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Remove the centre puck & spring clip if using a late bearing

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141012 – Kennedy 200mm Stage 2 Clutch Pressure Plate

Description:

  • Kennedy 2100lbs clutch pressure plate for performance engines
  • Compatible with early and late clutch release bearings
  • Designed for all Aircooled models with a 200mm flywheel

The Kennedy 2100lbs clutch pressure plate is specifically designed for performance engines at stage 2, providing enhanced clamping force for improved power transfer. This pressure plate is suitable for both early and late clutch release bearings in all Aircooled models equipped with a 200mm flywheel.

When using a late bearing, it's necessary to remove the centre puck and spring clip for proper installation. Please note that this upgrade will result in a stiffer clutch feel, so it's important to ensure that your clutch operating forks are in good condition and to consider installing a urethane cross shaft bush for optimal performance. Enhance your driving experience with this high-quality clutch pressure plate designed for serious enthusiasts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Remove the centre puck & spring clip if using a late bearing

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141014 – Kennedy 200mm Stage 3 Clutch Pressure Plate

Description:

  • Kennedy 2600lbs clutch pressure plate for performance engines
  • Designed for Stage 3 builds and use with 200mm flywheel
  • Compatible with both early and late clutch release bearings
  • Requires removal of center puck & spring clip for late bearings

The Kennedy 2600lbs clutch pressure plate is built for high-performance air-cooled engines, especially those with Stage 3 modifications. Designed to work with a 200mm flywheel, this pressure plate offers enhanced clamping force for better power transfer and reliability during aggressive driving.

Please note that this pressure plate will make the clutch feel stiffer, so it’s important to ensure your clutch operating forks are in good condition. Additionally, fitting a urethane cross shaft bushing is recommended for smoother operation. For use with both early and late clutch release bearings, but if using a late bearing, the centre puck and spring clip must be removed. Perfect for enthusiasts looking to upgrade their clutch system for performance builds.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141016 – SSP 200mm Stage 1 Clutch Pressure Plate, 1700lbs

Description:

  • 1700lbs pressure plate for performance engines up to 130bhp.
  • Compatible with early and late clutch release bearings.
  • Stiffens the clutch; ensure forks and cross shaft bush are upgraded.

The SSP 1700lbs clutch pressure plate is engineered for high-performance aircooled engines up to 130bhp, making it ideal for enthusiasts looking to enhance their vehicle's power and responsiveness. Designed to work with both early and late clutch release bearings on all aircooled engines with a 200mm flywheel, this pressure plate offers versatility and reliability.

For those using a late bearing, be sure to remove the centre puck and spring clip for proper installation. Please note, this pressure plate will make your clutch stiffer, so it's crucial to check that your clutch operating forks are in good condition. Additionally, fitting a urethane cross shaft bush is recommended to ensure smooth operation and longevity of your clutch system.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141020 – 180mm Heavy Duty Clutch Pressure Plate

Description:

Heavy Duty Pressure plate, 180mm. This heavy duty pressure plate offers strong and smooth cutch operation and improved spring pressure.

All fitted with a 180mm Flywheel

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964) - Type 3 (1962,1963,1964)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Split,Type 3

AC141110 – 200mm Heavy Duty Clutch Pressure Plate and Disc

Description:

  • Designed for high-performance Porsche 356 & VW Type 1 applications
  • 30% higher clamp load than stock for enhanced durability
  • Four-stage heat-treated diaphragms for improved strength
  • Includes pressure plate and premium organic clutch disc

This Heavy Duty Clutch Kit is specifically designed for high-performance applications, including Porsche 356 and VW Type 1/Early Bus models. Engineered to provide smooth engagement with a high holding capacity, this kit ensures reliable and stable performance even in demanding conditions. It includes both a pressure plate and a premium organic clutch disc for superior operation and longevity.

The pressure plate features a clamp load approximately 30% higher than stock, improving clutch life and overall performance. Each diaphragm undergoes a four-stage heat treatment to enhance tension strength while maintaining structural integrity. This robust design delivers extra clamping force, making it an ideal upgrade for those looking to maximise their vehicle’s clutch performance.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:All fitted with a 200mm Flywheel

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

ac1411208 – Heavy Duty Clutch Bearing Clip Set

Description:

  • Designed for early-style clutch release bearings
  • Heavy-duty coiled construction for added strength
  • Supplied as a pair for complete replacement

These heavy-duty coiled clips are built to secure early clutch release bearings with enhanced durability and tension. Ideal for classic VW models using early-style clutch systems, they ensure a firm and reliable fit under load.

Perfect for restorations or clutch servicing, these clips are supplied as a pair and are a direct-fit replacement for worn or weakened originals.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

ac1411240 – 180mm Metal Woven Performance Clutch Disc

Description:

Clutch disc metal woven heavy duty rigid clutch disc. 180mm

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Type 3 (1962,1963,1964)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Split,Type 3

AC1411301 – 200mm Centre Force Performance Clutch Disc

Description:

  • Centre Force clutch disc for 200mm flywheel models
  • Unique dual friction material for enhanced performance
  • Conventional surface on the pressure plate side, heat-transfer pucks on flywheel side
  • Requires less pressure and protects drivetrain from shock

The Centre Force clutch disc is designed for models with a 200mm flywheel, offering superior performance with its unique dual friction material. The disc features a conventional surface on the pressure plate side and 8 pucks of heat-transferring metal on the flywheel side, ensuring optimal heat dissipation and durability.

Upon initial engagement, the disc will slip slightly to protect the drivetrain from shock. Once fully engaged, recovery is instantaneous for smooth and responsive shifting. Compared to other clutch discs, this design requires less pressure, offering an easier pedal feel while maintaining exceptional strength and control under heavy load. Ideal for high-performance applications and daily driving alike.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1411369 – Heavy Duty 8mm Clutch Bolt Set

Description:

Heavy duty 8mm clutch bolts. Supplied as a set, can be used as a standard replacement.
NOTE: Not for original 215mm flywheels, but will fit reproduction 215mm flywheels

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1414080 – Clutch Pressure Plate, 200mm, 1700lb

Description:

  • Heavy-duty 1700lb pressure plate for high performance
  • Suitable for drag race, off-road, and street applications
  • 200mm size with a removable centre ring for versatility

The EMPI 1700lb 200mm clutch pressure plate is engineered to bring durability and reliability to any high-performance setup. Built to meet the needs of drag racers, sand/off-road enthusiasts, and street performance drivers, this pressure plate offers the strength needed to handle demanding applications. With a pressure rating of 1700lbs, it ensures superior grip and stability, even under high stress.

This 200mm pressure plate features a factory-balanced design and includes a removable centre ring, making it adaptable for both early and late gearbox configurations. The robust build quality and adaptability make it an excellent upgrade for drivers seeking peak performance and dependable power delivery across various applications.




The latest addition to the EMPI high performance line. Perfect for drag race, sand/off-road or high performance street applications. These 200mm pressure plates rated at 1700lbs and is factory balanced with the removablecentrer ring to cover both early and late transmissions.



Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1415035-10 – Heavy Duty Clutch Shaft

Description:

Heavy duty clutch cross shaft 14/16mm with full circle welded arms. For use with clutch pressure plate with pad. You will need to purchase the bushing kit to match part number AC198502910

For Tunnel-case gearboxes only, not early Split-case

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970)

Notes:**SHAFT ONLY ALSO PURCHASE AC198502910 BUSHING KIT**

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Split,Type 3

AC1415035-11 – Heavy Duty Clutch Shaft, 14/16mm

Description:

Heavy duty clutch cross shaft 14/16mm with full circle welded arms. For use on early Type 1 gearboxes with a late clutch and no pressure plate pad. A clutch release bearing adaptor sleeve needs to be fitted. You will need to purchase the bushing kit to match part number AC198502910

Compatible Vehicles: - T2 Bay (1971,1972) - Beetle (1971,1972) - Beetle Cabrio (1971,1972) - Karmann Ghia (1971,1972) - Type 3 (1971,1972)

Notes:Shaft only, see AC198502910 for bushing kit and AC301141 for adapter sleeve.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

AC1415035-13 – Heavy Duty Clutch Shaft

Description:

Heavy duty clutch cross shaft 14/16mm with full circle welded arms. For use with clutch pressure plate without pad. You will need to purchase the bushing kit to match part number AC198502910

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975)

Notes:**SHAFT ONLY ALSO PURCHASE AC198502910 BUSHING KIT**

Additional Vehicle Info: T2 Bay

AC1415035-14 – Heavy Duty Clutch Shaft

Description:

Heavy duty clutch cross shaft 18/20mm with full circle welded arms. Designed for use with a late clutch and no pressure plate pad. You will need to purchase the bushing kit to match part number AC198502911

Compatible Vehicles: - T2 Bay (1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:**SHAFT ONLY ALSO PURCHASE AC198502911 BUSHING KIT**

Additional Vehicle Info: T25,T2 Bay

AC1415035-15 – Heavy Duty Clutch Shaft

Description:

Heavy duty clutch cross shaft 18/20mm with full circle welded arms. For use on early Type 1 gearboxes with a late clutch and no pressure plate pad. You will need to purchase the bushing kit to match part number AC198502911

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1973,1974) - Type 3 (1973)

Notes:**SHAFT ONLY ALSO PURCHASE AC198502911 BUSHING KIT**

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC141719 – Heavy Duty Clutch Lever Arm

Description:

Clutch lever arm, forged and therefore stronger than standard item. T1 up to 3/72 but check dimensions. T2 002 gearbox. For 16mm cross shaft only

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC141719A – Heavy Duty Clutch Lever Arm

Description:

Clutch lever arm, forged and therefore stronger than standard item. 72> & 091 but check dimensions. For 20/18mm shaft.
Not for hydraulic clutch T25

Compatible Vehicles: - T2 Bay (1976,1977,1978,1979) - Beetle (1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1972,1973,1974) - Type 3 (1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,Type 3

AC1419918 – Clutch Lever Arm, Long

Description:

Forged clutch cable arm suitable for 002 transmission with 16mm cross shaft with a distance of 86.305mm on hole centers.  

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Australia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle Brazil/Fusca (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle Mexico (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Beetle USA (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Buggy/Baja (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,T2 Bay

AC198090A – Piston rings, Total Seal full set, 90.5mm (1.5/2/4mm

Description:

Total Seal Piston rings, full set, to suit 90.5mm Aircooled Type1/2 pistons.
Rings are 1.5 / 2 / 4mm thick

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC198094A – Piston Rings Total Seal Full Set, 94mm (1.5/2/4)

Description:

  • Full set for 94mm Aircooled Type 1/2 pistons
  • Includes 1.5mm, 2mm, and 4mm thick rings
  • Gapless ring placed in the #1 groove for better sealing
  • Improves cylinder sealing and intake stroke efficiency

The Total Seal Piston Rings are designed for 94mm Aircooled Type 1/2 pistons, providing enhanced performance and reliability for your engine. By moving the gapless ring to the #1 ring groove, these rings effectively seal the cylinder closer to the combustion chamber, improving the seal during compression and power strokes. This results in better ring seal on the intake stroke, allowing for more efficient cylinder filling, especially in naturally aspirated engines.

Piston rings are crucial for maintaining a proper seal between the combustion chamber and the crankcase. As rings wear, performance declines, leading to increased oil consumption and blow-by. This set of Total Seal Piston Rings is sold as a complete set to replace worn-out rings and restore your engine's efficiency. Whether you’re rebuilding your engine or upgrading to improve performance, these high-quality rings are an essential part of a durable and high-performing engine.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC198101 – Piston Rings Kit, 87mm,2x2x5

Description:

Piston ring kit 2x2x5. Supplied as a complete kit with all the piston rings. For use with 87mm / 1641cc barrel and piston kit.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19810171 – SCAT 10mm 4140 Chromoly Head Stud Kit, Type 1 Engine

Description:

SCAT 10mm 4140 chromoly head stud kit for type 1 engine (16 Studs) prevents head stud stretch and breakage, and these quality units from SCAT will NOT break or stretch! Kit comes with (16) studs, (16) washers, and (16) nuts. 145,000PSI Tensile Strength, designed for stock and High Performance Engines. If you have less than 250hp NA, or 400hp Turbo, you do not need anything ''better'' than these!

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC198102 – CSP Type-4 Upright Fan Conversion

Description:

  • Effortless conversion to upright fan configuration, reusing existing parts
  • Ensures optimal cooling air distribution with a well-designed setup
  • Compatible with original 32kW / 44HP or 37kW / 50HP fan housings

Transform your Type 4 engine with our upright fan conversion, an innovative solution that maximises efficiency and performance while allowing for the reuse of many existing components. This conversion guarantees excellent cooling air distribution, ensuring your engine runs at optimal temperatures.

For added versatility, you can use the original fan rotor, which operates quietly, or upgrade to our recommended 22kW / 30HP style fan housing that accommodates a larger fan rotor. This setup not only enhances cooling efficiency but also creates more space for carburettor installation, making it a smart choice for any performance build. Enjoy a seamless blend of reliability and improved engine performance with this Type-4 upright fan conversion.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Minor drilling tasks are necessary on the engine case (CU engine cases require milling tasks and additional spacer 198 230 400CU). The alternator stand, which is suitable for mounting either DC or AC generators, is screwed onto the engine casing with the accompanying retaining block. The black gel coated cylinder covers are made from glass fibre reinforced plastic and the locations of the sparking plug holes are only indicated, so that they can be drilled according to the cylinder heads that are being used. The standard oil cooler will need to be removed and replaced by a front oil cooler (full fitting instructions are included)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split

AC19810237 – Scat Performance Engine Gasket Kit 1300-1600cc

Description:

Scat performance engine gasket kit for 1300-1600 twin port engines

Includes special intake gaskets, 8 dowel crankshaft gasket, copper exhaust nuts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC198104 – Alternator Pulley for the CSP Type-4 Upright Fan Conversion Kit

Description:

Pulley for the CSP Type-4 Upright Fan Conversion Kit 

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split

AC198121 – Piston Ring Set 90.5mm, 2x2x4.75

Description:

Piston ring kit 2x2x4.75. Supplied as a complete kit with all of the piston rings. For use with 90.5mm barrel and piston kits.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC198131 – Piston rings, 90.5mm, 1.5x2x4

Description:

Piston ring kit 1.5x2x4. Supplied as a complete kit with all the piston rings. For use with 90.5mm barrel and piston kit.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC198141 – Piston rings, 92m, 2x2x4

Description:

Piston ring kit 2x2x4. Supplied as a complete kit with all the piston rings. For use with 92mm barrel and piston kit.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19815044 – Barrel spacers 90.5/92, 2.25mm

Description:

Cylinder base spacer shim kit for 90.5/92mm barrels. The shims are 2.25mm and supplied in a set of 4

Use these to correct the deck height (distance from the piston crown to the top of the cylinder) after machining the crankcase and heads or when changing stroke.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19815047 – Barrel spacers 90.5/92, 6.50mm

Description:

Cylinder base spacer shim kit for 90.5/92mm barrels. The shims are 6.50mm and supplied in a set of 4

Use these to correct the deck height (distance from the piston crown to the top of the cylinder) after machining the crankcase and heads or when changing stroke.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19815166 – Barrel spacers 94mm 2.29mm

Description:

Cylinder base spacer shim kit for 94mm barrels. The shims are 2.29mm and supplied in a set of 4

Use these to correct the deck height (distance from the piston crown to the top of the cylinder) after machining the crankcase and heads or when changing stroke.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19815167 – Barrel spacers 94mm 4.5mm

Description:

Cylinder base spacer shim kit for 94mm barrels. The shims are 4.50mm and supplied in a set of 4

Use these to correct the deck height (distance from the piston crown to the top of the cylinder) after machining the crankcase and heads or when changing stroke.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19815168 – Barrel spacers 94mm 5.5mm

Description:

Cylinder base spacer shim kit for 94mm barrels. The shims are 5.50mm and supplied in a set of 4

Use these to correct the deck height (distance from the piston crown to the top of the cylinder) after machining the crankcase and heads or when changing stroke.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC19815170 – Barrel spacers 94mm 7.50mm

Description:

Cylinder base spacer shim kit for 94mm barrels. The shims are 7.50mm and supplied in a set of 4

Use these to correct the deck height (distance from the piston crown to the top of the cylinder) after machining the crankcase and heads or when changing stroke.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC198171 – Piston Ring Set, 94mm, 1.5x2x4

Description:

Piston ring kit 1.5x2x4. Supplied as a complete kit with all the piston rings. For use with 94mm barrel and piston kit.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

ac198172988 – Engine Nuts, 12 Point 8x1.25, Black, Set of 8

Description:

Empi Engine nuts, 12 point head 8x1.25mm supplied in sets of 8

The unique 12 point socket ensures maximum holding force when tightening down - 10mm 12point socket required. 

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Notes:Uses 12 point 10mm socket

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC1984009 – Cylinder Head Stud Kit 10mm Standard Length Chromoly

Description:

  • Designed for high-performance and turbocharged engines
  • Includes nuts and special thick washers for secure fit
  • Durable chromoly construction for enhanced strength

Elevate your engine’s performance with our Stock Length Chromoly 10mm Head Stud Kit, specifically crafted for high-performance and turbocharged applications. This comprehensive kit includes everything you need: durable 10mm chromoly studs, high-quality nuts, and special thick washers, ensuring a secure and reliable fit.

Ideal for those looking to boost engine reliability under high stress, these studs are engineered to withstand extreme conditions. Whether you're building a race-ready engine or enhancing your daily driver, this head stud kit provides the strength and stability needed for optimal performance. Upgrade your setup and experience the difference with this essential component.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984010 – Cylinder Head Stud Kit 10mm 1/2'' Longer Chromoly

Description:

Extra long chromoly 10mm head stud kit. Extra length is 12.7mm

Kit includes nuts and the special thick washers

10mm studs are usually only used on very high performance or turbo charged engines. Extra long sets are usually used for stroker engines

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984018 – Crankcase Hardware Kit Deluxe 8mm

Description:

Crankcase hardware kit with all you need to assemble an engine. This kit is for cases with 8mm head studs

Kit includes all you need to assemble a crankcase correctly including the special self-sealing nuts and hardened washers.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984019 – Crankcase Hardware Kit Deluxe 10mm

Description:

Crankcase hardware kit with all you need to assemble an engine. This kit is for cases with 10mm head studs

Kit includes all you need to assemble a crankcase correctly including the special self-sealing nuts and hardened washers.


Hardware sizes and dimensions. 

M8 x 50 Hex Bolt [x2]

M8 x 55 Hex Bolt [x1]

M8 Nyloc Nut [x21]

M8 Washer [x21]

M10 Head Nut [x16]

M10 Head Nut Washer [x16]

M8 Self-locking Exhaust Nut [x8]

M12 Nyloc Case Nut [x6]

M12 Case Nut Washer [x6]

M6 Dome Headed Nut [x6]

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984020HD – Cylinder Head Stud Kit 8mm Standard Length Chromoly CSP HD

Description:

Heavy duty Chromoly cylinder head stud kit M10

Designed to fit twin port engine with 8mm stud inserts.

Includes all the head studs, washers and nuts to fit.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984070 – Teflon Button Set 85.5mm Piston

Description:

Teflon buttons 85.5mm. Much stronger than the stock gudgeon pin clips. These wont break or wear out. Supplied in a set of 8

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984071 – Teflon Button Set 87/88mm Piston

Description:

Teflon buttons 87/88mm. Much stronger than the stock gudgeon pin clips. These wont break or wear out. Supplied in a set of 8

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984073 – Teflon Button Set 90.5mm Piston

Description:

Teflon buttons 90.5mm. Much stronger than the stock gudgeon pin clips. These wont break or wear out. Supplied in a set of 8


Head ID - 22mm

Head size - 7mm

Inside Diameter - 13.5mm

Overall height - 13mm

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC1984075 – Teflon Button Set 94mm Piston

Description:

Teflon buttons 94mm. Much stronger than the stock gudgeon pin clips. These wont break or wear out. Supplied in a set of 8

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

Is this article helpful?
2 1 2
Leave a Comment
 
Attach a file