AC401401 – Front Beam Caster Shim Bolts Extra Long Pair
Description:
Front beam bolts for use with castor shims as they are longer than standard. Supplied as a pair
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4014125 – Caster Shim Set 1.25 Degrees
Description:
EMPI front beam caster shims 1.25 degrees
An often overlooked part of lowering your vehicle is correcting the negative castor angle that adjustable front beams can cause.
If your steering wanders in cross-winds or on uneven road surfaces, doesn't self-centre or is lighter than it used to be, then your castor angle needs to be corrected.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
These shims are inserted between the lower axle beam tube and the frame head to add a few degrees of positive castor, use longer beam bolts, part number: AC401401 when fitting. Calculating your castor angle on the driveway or home garage is tricky, we recommend fitting one pair to start with and add more if needed.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4014400 – Caster Shim Set 4.00 Degrees
Description:
EMPI front beam caster shims 4.00 degrees
An often overlooked part of lowering your vehicle is correcting the negative castor angle that adjustable front beams can cause.
If your steering wanders in cross-winds or on uneven road surfaces, doesn't self-centre or is lighter than it used to be, then your castor angle needs to be corrected.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
These shims are inserted between the lower axle beam tube and the frame head to add a few degrees of positive castor, use longer beam bolts, part number: AC401401 when fitting. Calculating your castor angle on the driveway or home garage is tricky, we recommend fitting one pair to start with and add more if needed.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4014525 – Caster Shim Set 5.25 Degrees
Description:
EMPI front beam caster shims 5.25 degrees
An often overlooked part of lowering your vehicle is correcting the negative castor angle that adjustable front beams can cause.
If your steering wanders in cross-winds or on uneven road surfaces, doesn't self-centre or is lighter than it used to be, then your castor angle needs to be corrected.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
These shims are inserted between the lower axle beam tube and the frame head to add a few degrees of positive castor, use longer beam bolts, part number: AC401401 when fitting. Calculating your castor angle on the driveway or home garage is tricky, we recommend fitting one pair to start with and add more if needed.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC405005 – Brake Caliper Brackets 1302/3 Pair
Description:
1302 and 1303 caliper brackets for use on drum brake spindles.
As supplied in our brake disc conversion kits these allow you to convert to disc brakes easily.
Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC405006 – Bolt, Caliper Brackets, 1302/3 Disc Conversion
Description:
- Essential for 1302/3 Disc Conversion Kit
- Quantity: 8 bolts required for complete installation
- Durable construction ensures reliable performance
Ensure a secure fit for your caliper brackets with our bolts designed specifically for the AC405005 on the 1302/3 disc conversion kit. You’ll need 8 bolts for a complete installation, providing the strength and reliability you need for optimal performance. Upgrade your braking system with confidence.
Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
x8 needed for brackets
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC405013 – Upper Ball Joint, Long Travel
Description:
- Designed for lowering the front 2-3 inches or more
- Extended travel for improved suspension performance
- Sold individually, perfect for custom setups
These long travel upper trailing arm ball joints are essential for VW enthusiasts looking to lower their front suspension by more than 2-3 inches. Specially engineered for extended travel, they provide improved articulation and suspension performance while maintaining durability under the added stress of a lowered setup.
Supplied individually, these ball joints are ideal for custom builds or upgrades, ensuring smooth handling and better ride quality, even at lower heights. Perfect for those looking to achieve a clean, lowered stance without sacrificing performance or reliability.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:Requires a hydraulic press to fit.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC405014 – Ball Joint Lower Long Travel
Description:
- Designed for lowering the front 2-3 inches or more
- Extended travel for improved suspension performance
- Sold individually, perfect for custom setups
These long travel lower trailing arm ball joints are essential for VW enthusiasts looking to lower their front suspension by more than 2-3 inches. Specially engineered for extended travel, they provide improved articulation and suspension performance while maintaining durability under the added stress of a lowered setup.
Supplied individually, these ball joints are ideal for custom builds or upgrades, ensuring smooth handling and better ride quality, even at lower heights. Perfect for those looking to achieve a clean, lowered stance without sacrificing performance or reliability.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:Requires a hydraulic press to fit.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4052941 – EMPI Grease Cap With Speedo Hole, Left
Description:
Front hub wheel bearing grease cap with speedo hole. This is specifically designed by EMPI for use with their disc brake conversions and drums. Left hand side 'inner' fitment.
Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Type 3 (1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3
AC4052942 – EMPI Grease Cap, Right
Description:
Front hub wheel bearing grease cap. This is specifically designed by EMPI for use with their disc brake conversions and drums. Right hand side 'inner' fitment.
Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Type 3 (1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia,Type 3
AC4052975 – Brake Caliper Bracket
Description:
Beetle Caliper Bracket for using a Stock Caliper on a Drum Brake Balljoint Spindle. Sold separately, 2 required per car.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC405310S – Dropped Spindles, 6cm Drop
Description:
- Lowers vehicle by 6 cm, widens track by 1 cm per wheel
- Direct fit, no modifications required
- Maintains original ball joint travel and comfort
SSP Ball Joint Dropped Spindles are the ideal solution for lowering your Bus by 6 cm while retaining its original ride quality. With an increased track width of 1 cm per wheel, they provide improved handling without compromising comfort. These spindles are designed for a perfect fit, allowing for easy installation with no modifications required.
Compatible with all years of Bus models, these dropped spindles require a 1973-onward brake system. For earlier models, upgrading to later brakes is necessary, and specific caliper fixing bolts may also be required. This ensures a smooth transition while enhancing both performance and style.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
Will fit with all aluminium wheels and 14 '' original steel can be fitted without difficulty. Disc backing plates will need modifying to fit but can be removed entirely
Will fit all years of bus but will only take the 1973 onwards brake system. For pre 73 buses you will need to fit later brakes And M14 Caliper fixing bolts 211615143A & 211615141A may be needed or a wide-5 73 on disc brake conversion. (We do not stock a wide 5 1973 on brake kit)
Additional Vehicle Info: T2 Bay
AC405641B – Front Hub Seal
Description:
Hub seal for CSP front disc brake kit
Compatible Vehicles: - T2 Bay (1968,1969,1970)
Additional Vehicle Info: T2 Bay
AC405652320 – Front Axle Beam Polyurethane Bush Kit
Description:
Inner and outer urethane front beam bush kit for King and Link pin models supplied with red bushes. These replace the original inner bushes and micarta outer bushes in a king and link pin front beam.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC405652420 – Front Axle Beam Polyurethane Bush Kit
Description:
Inner and outer urethane front beam bush kit for King and Link pin models supplied with red bushes. These are for models with original needle bearings in a king and link pin front beam.
Kit contents
x4 red urethane 7.35'' bushes
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC405652421 – Front Axle Beam Polyurethane Bush Kit
Description:
4 piece urethane axle beam bushing kit, inner & outer for a ball joint beam.
Kit contents
2x red urethane 6'' bushes
2x red urethane 6.313'' bushes
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Beetle USA (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC4056562 – Hub Nut Front, Pair
Description:
- Lightweight
- CNC Machined
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4060 – Dropped Spindles For Disc Brakes
Description:
SSP dropped spindles for use with late style disc brakes on King and Link pin suspension.
An excellent way to lower the front suspension by 2 1/2" and prepare for a late disc brake setup. Track width is increased by 1/2" each side.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Notes:The standard disc brake backing plates can't be used with these spindles.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC4061 – Dropped Spindles For Disc Brakes
Description:
- Lowers front suspension by 2.5"
- Compatible with 4x130 disc brakes and ball joint suspension
- Increases track width by 0.5" on each side for improved handling
SSP dropped spindles are a great choice for lowering the front suspension of your vehicle by 2.5", giving it a stylish, lower profile. These spindles are designed for use with 4x130 disc brakes and ball joint suspension systems, ensuring a perfect fit and compatibility.
In addition to lowering the ride height, these spindles increase the track width by 0.5" on each side, which enhances handling and stability. Ideal for both aesthetics and performance upgrades, these spindles offer a practical solution for those looking to achieve a lowered stance and improved driving dynamics.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:For pre 1968 model, the inner bearing will need replacing with 311-405-625/E and inner tie rod ends with 311-415-811/C and 311-415-812/C
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC4062 – Dropped Spindles For Drum Brakes
Description:
SSP dropped spindles for use with 5x205 drum brakes on King and Link pin suspension.
An excellent way to lower the front suspension by 2 1/2". Track width is increased by 1/2" each side.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Notes:When fitting the speedo cable it may be easier to use the off-set hole in the rear of the spindle, rather than the central hole.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC4063 – Dropped Spindles For Balljoint Drum Brakes
Description:
SSP dropped spindles for use with 4x130 or 5x205 PCD drum brakes on ball joint suspension.
An excellent way to lower the front suspension by 2 1/2". Track width is increased by 1/2" each side.
Get the wheel alignment checked once fitted to ensure good handling and even tyre wear.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:For pre 1968 model, the inner bearing will need replacing with 311-405-625\/E and inner tie rod ends with 311-415-811\/C and 311-415-812\/C
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC4064 – Zero Offset Forged Dropped Spindles For Disc Brakes
Description:
- Restores correct steering geometry and front track width
- Forged construction for strength and dimensional accuracy
- Improves handling and eliminates alignment issues
- Fits disc brake applications only
The Zero Offset Forged Spindles are engineered to restore the correct steering geometry and front track width for your vehicle, ensuring enhanced handling and smoother driving. Crafted from high-quality forged steel, these spindles are stronger and more dimensionally accurate than original equipment, addressing common alignment issues while improving overall performance.
Designed specifically for disc brake applications, these spindles provide the perfect solution for those looking to upgrade their front suspension or replace worn-out parts. With precise fitment and improved durability, they ensure a more stable ride and eliminate the need for constant adjustments. Perfect for restoring or upgrading your vehicle’s steering and suspension system.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC407001 – Sport Cross-Drilled Solid Front Brake Discs 278x9mm
Description:
Sport cross-drilled solid front brake discs (supplied in pairs)
To fit
Beetle 8/66-7/79
Karmann Ghia 8/66-7/74
Type 3 8/66-7/70
Mexican beetle- These discs can also be fitted to Mexican beetles by discarding the original hub.
Zimmermann cross-drilled brake discs are designed and executed with meticulous precision. The holes in the braking surface help dissipate heat and eliminate brake dust and gases.
The discs of the Sport range are specifically designed to minimise thermal distortion and disc warping even in the most severe operating conditions. As a result, they ensure outstanding braking power in both everyday traffic and the most extreme high performance driving.
All the discs in the sport range are coated in ''Coat Z – anti corrosion'' which prevents rust and gives a more attractive appearance. Immediate functional capability without removal of the coating before mounting.
In spite of their exclusive characteristics, the Zimmermann Sport discs are the same size as the original equipment components, are fully compatible with the standard calipers, wheels and other components of the vehicle, and are simple to install.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1966,1967,1968,1969,1970)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC407002 – Front Brake Disc & Hub, 5x130, 278x9.5, Single
Description:
- 278mm diameter, 9.5mm thick
- Compatible with standard wheel bearings and calipers
- Can be used on Beetles pre 65
Upgrade your braking system with our front brake disc, featuring a 5x130 PCD and measuring 278mm in diameter with a 9.5mm thickness. Designed for use with standard wheel bearings and brake calipers, this disc ensures reliable performance and safety.
Ideal for Beetles up to 1965 when using disc brake dropped spindles, this disc is sold individually but we recommend replacing in pairs for optimal braking balance. Enhance your vehicle's stopping power with this high-quality, precision-engineered brake disc.
Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970)
Notes:
T1 67>
KG 67>
Type 3 8/66-7/70
T1 >65 when fitting disc brake dropped spindles
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC407008 – Brake Disc 5x100 Stud Pattern
Description:
Beetle brake disc, Plain Disc. Suitable for 5 x 100 Stud pattern
Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC407010 – Brake Disc with 5x120 Stud Pattern
Description:
Beetle brake disc, Plain Disc. Suitable for 5 x 120.65 Stud pattern (4 3/4'' - Jag/Chevy fitment)
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC407222962 – Brake Disc For Empi Ball Joint Disc Kit 5x205 Stud Pattern
Description:
Replacement front brake disc for use on ball joint EMPI front disc brake kits with a 5/205 stud pattern. Supplied individually.
Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC411105 – Front Suspension 50mm Lowering Springs for 1302 or 1303 Pair
Description:
50mm lowering springs for the front suspension.
A great replacment made in the UK for SSP.
Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC411106 – Front Suspension 75mm Lowering Springs for 1302 or 1303 Pair
Description:
75mm lowering springs for the front suspension.
A great replacment made in the UK for SSP.
Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:Recommended to be used with shortened shock inserts. If using with stock length shock inserts it is necessary to fix the spring to the cup on the strut.
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC411111S – Torsion Bar Leaves For 2 Inch Narrowed Beam, King & Link
Description:
- Designed for 2'' narrowed king and link pin front beam
- Supplied as 1 set (2 sets needed per axle)
- Precision-engineered for durability and performance
Upgrade your vehicle’s suspension with these high-quality torsion leaves, specifically crafted for use with a 2" narrowed king and link pin front beam. Precision-engineered, these leaves offer enhanced performance and stability on the road, making them a vital component for custom builds or restoration projects. Each set contains enough for half of your axle, so be sure to order two sets for a complete axle setup.
Whether you're restoring a classic car or customising a ride for smoother handling, these torsion leaves are a reliable choice. Built to last, they provide consistent support, helping you maintain optimal suspension performance with every drive.
Compatible Vehicles: - Beetle (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC411131S – Torsion Bar Leaves For 2 Inch Narrowed Beam, Ball Joint
Description:
- Designed for 2'' narrowed ball joint front axle beams
- High-quality torsion leaves ensure superior performance
- Sold as a set; 2 sets required per axle for complete installation
Enhance your vehicle's suspension with our premium torsion leaves, specifically engineered for use with 2'' narrowed ball joint front axle beams. Crafted for durability and strength, these torsion leaves provide excellent handling and ride quality, ensuring your vehicle performs at its best.
Each purchase includes one set of torsion leaves, and remember that two sets are required per axle for a complete upgrade. Elevate your driving experience with our reliable torsion leaves that are built to last.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4116302 – Torsion Bar Leaves For 65mm Narrowed Beam
Description:
- Complete set for 65mm narrowed front beam
- Designed for precision and durability
- Easy installation and perfect fit
This complete set of narrowed torsion leaves is designed specifically for a 65mm narrowed front beam, providing an exact fit for enhanced performance. The torsion leaves are made to deliver reliable strength and stability, ensuring your vehicle’s suspension operates smoothly under various conditions.
Perfect for enthusiasts looking to upgrade or replace their front beam components, this set offers a high-quality solution. With easy installation, you’ll enjoy improved handling and a more refined driving experience, making it an ideal choice for restoration or modification projects.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC4116500-40 – Front Anti Roll Bar For 2 Inch Narrowed Beam
Description:
- Made from heavy-duty 3/4" steel with zinc plating
- Designed for 2" narrowed king & link pin beams
- Includes durable urethane bushings
This front anti-roll bar kit helps reduce body roll and improves handling. Built from strong 3/4" steel with a zinc-plated finish, it offers lasting durability and protection from corrosion.
It is made to fit 2" narrowed king and link pin beams, providing a precise fit. The included urethane bushings help absorb road vibrations for a smoother ride.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4116500-41 – Front Anti Roll Bar For 2 inch Narrowed Beam
Description:
- Includes mounts and clamps for easy installation
- Designed for 2" narrowed ball joint beams
- Heritage kits save time and money
Upgrade your vehicle's handling with this Front Anti-Roll Bar Kit, specifically designed for 2" narrowed ball joint beams. The kit comes complete with all necessary mounts and clamps, ensuring a hassle-free installation process.
Heritage kits are crafted to offer exceptional value, combining both efficiency and cost-effectiveness. By choosing this kit, you streamline your setup and enhance your vehicle's performance, all while saving both time and money.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC411650011 – Heavy Duty Front Anti Roll Bar Kit
Description:
Front heavy duty uprated anti roll bar suitable for a standard Beetle - not lowered.
For Beetle with standard balljoints.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC411650014 – Heavy Duty Front Anti Roll Bar Kit
Description:
Heavy duty front anti roll bar kit.
Includes urethane bushes.
Reuses original or standard clamps.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC411650020 – Heavy Duty Front Anti Roll Bar Kit For Lowered Car
Description:
Front heavy duty uprated anti roll bar suitable for a lowered Beetle.
Supplied with urethane bushes. Clamps not included.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC411650021 – Anti Roll Bar Front Heavy Duty Kit For Lowered Model
Description:
- Heavy-duty front anti-roll bar for lowered vehicles.
- Improves handling and reduces body roll; prevents wheel hop.
- Includes red urethane bushings; re-use original clamps.
This front heavy-duty anti-roll bar is specifically designed for ball-jointed lowered vehicles, enhancing handling and minimizing body roll. It also helps prevent wheel hop during aggressive cornering, ensuring a more stable and responsive driving experience. Not suited to 1302/03.
The bar comes complete with durable red urethane bushings, which offer excellent performance and longevity. For installation, you can re-use the original clamps, making the upgrade straightforward and cost-effective. This anti-roll bar is a key component in achieving improved suspension performance and control.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Buggy/Baja (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC411650022 – Anti Roll Bar, Heavy Duty, For 2" Narrowed Beam with Bushes
Description:
3/4" diameter anti roll Bar for 2" narrowed ball joint beam. Supplied with bushes.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC4116512-10 – Heavy Duty Front Suspension Coil Springs 1302/3
Description:
Springs Heavy Duty Standard Length for stock or lowered struts
Compatible Vehicles: - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4119599 – Uprated Front Anti Roll Bar 1302/3
Description:
Front uprated anti roll bar suitable for a 1302 / 1303 Beetle
Bars feature zinc plated steel components and hardware along with red urethane bushings.
Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4119601 – Uprated Front Anti Roll Bar 1303
Description:
Uprated front anti roll bar kit including urethane bushes to fit.
Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1973,1974,1975,1976,1977,1978,1979)
Notes:Existing roll bar clamps will need to be re-used.
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4119611 – Uprated Anti Roll Bar Kit Front
Description:
- Heavy-duty 7/8" anti roll bar with zinc-plated steel components and red urethane bushings
- Enhances handling, reduces body sway, and prevents wheel wobble
- Utilises original 22mm clamps
This uprated front anti-roll bar kit is designed to improve handling and control by replacing the small stock anti roll bar. The heavy-duty anti roll bar features a zinc-plated coating on its steel components for added durability and resistance to corrosion.
The kit includes neoprene mounting blocks and red urethane bushings, enhancing the stability of your vehicle while reducing body sway and wheel hop during hard cornering. Note that it utilises standard clamps for installation, making it a straightforward upgrade for better performance and driving dynamics.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:This sway bar is designed for a stock width and stock height front beam. This sway bar does not include clamps for the bushings, the stock clamps can re-used but can be difficult to clamp over the urethane bushings.
Additional Vehicle Info: T2 Bay
AC4119611-1 – Urethane Anti-Roll Bar Bush for Uprated Anti-Roll Bar
Description:
- Precision fit for AC4119611 & AC411650014 only
- Durable urethane construction for long-lasting performance
- Ideal replacement for worn or damaged bushings
- Does not fit standard ARB models
This high-quality replacement urethane bushing is engineered specifically for the ARB models AC4119611 and AC411650014, ensuring a precise fit and reliable performance. Crafted from durable urethane, it offers enhanced strength and resilience, making it ideal for replacing worn or damaged bushings in these particular ARB assemblies.
Sold individually, this bushing is the perfect solution for maintaining the integrity and function of your ARB system. Please note, it is not compatible with standard ARB models, so be sure to verify compatibility with your specific part numbers before purchasing.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Bay,T2 Split
AC412011 – Front Suspension Strut Brace Unpainted 1302/3
Description:
Fully adjustable strut brace unpainted, supplied as a kit with hardware. Stiffens the front body reducing flex thereby improving handling. They bolt to the top strut mounts across the front luggage area.
Compatible Vehicles: - Beetle (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4129626 – Front Suspension Adjustable Lowering Struts 1302/3 Pair
Description:
Adjustable lowering strut housings for use with our lowered strut inserts 2x AC4129629. For use when lowering a 1302/1303 more than 3''on 3 bolt models.
Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)
Notes:You will also require 2x AC4129629 inserts
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4129627 – Front Suspension Adjustable Lowering Struts 1303 Pair
Description:
Adjustable lowering struts for use with our lowered strut inserts AC4129630. For use when lowering a 1303 more than 3''on 2 bolt models.
Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)
Notes:To fit use AC4129630
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4129629 – Front Lowered Suspension Strut Insert 1302/3
Description:
Front lowered strut insert. For use with our adjustable front struts AC4129626.
Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC4129630 – Front Lowered Suspension Strut Insert 1303
Description:
Front lowered strut insert. For use with our adjustable front struts AC4129627.
Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC413001 – Front Coil Over Shock Absorber Pair
Description:
- Coil-over front shock absorber with chrome-plated helper spring
- Adjustable lower spring seat for customizable tension
- Ideal for Bajas, buggies, and trikes; dimensions: 423mm extended, 272mm collapsed
This coil-over front shock absorber from SSP is designed for ball joint suspension and features a chrome-plated helper spring, making it a perfect choice for Bajas, buggies, and trikes. The adjustable lower spring seat allows for fine-tuning of the tension, enabling you to firm up the suspension according to your needs.
With an extended length of 423mm and a collapsed length of 272mm, it’s crucial to ensure the correct length shocks are fitted to a lowered vehicle. Aim for at least 50mm of upward and downward travel from the normal ride height to maintain optimal handling and comfort. C-wrenches are included for easy adjustments, providing versatility in your suspension setup.
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:423mm extended, 272mm collapsed. It is very important to fit the correct length shocks to a lowered vehicle. There must be at least 50mm of upward and downward travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need. i.e. A normal ride height measurement of 350mm means the new shock absorber must be at least 300mm when fully compressed and 400mm when fully extended. Prior to fitting new shock absorbers always cycle it through a few strokes in the correct orientation as it will be fitted to the vehicle.
Additional Vehicle Info: Beetle,Karmann Ghia
AC413001E – EMPI Front, Lowered Shock, 385-280mm
Description:
EMPI shock, front, lowered gas shock absorber to fit ball joint beams.
280mm compressed / 385mm extendedCompatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
280mm compressed / 385mm extended
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC413001Z – GAZ Front Suspension Coil Spring
Description:
Gaz spring for use on AC413101Z Coilover shocks. Supplied each
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC413005Z – GAZ Front Suspension Coil Spring
Description:
Gaz spring for use on AC413105Z Coilover shocks. Supplied each
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC413101Z – GAZ Coilovers, Pin Top, Eyelet Bottom, 330/230mm, Pair, Front
Description:
- Adjustable damping and rebound for tailored performance
- Pin top and eyelet bottom fittings ensure compatibility
- Maximum lengths: 330mm extended, 230mm compressed
Upgrade your vehicle’s front suspension with Gaz coilovers, designed for precision and control. Featuring pin-type fittings at the top and eyelet fittings at the bottom, these coilovers ensure a reliable fit. With maximum extended and compressed lengths of 330mm and 230mm, they are engineered for versatile performance on a variety of terrains. Adjustability is at the forefront with a built-in knob, allowing you to fine-tune damping and rebound to match your driving style.
Supplied as a pair, these coilovers deliver high-quality suspension enhancement but do not include springs, which must be purchased separately (spring part number AC413003Z Please note, these coilovers are not compatible with 1302 or 1303 models, ensuring precise applications for other configurations.
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
Gaz adjustable coilovers have all the benefits of GAZ shock absorbers above with the addition of a height adjustable spring set. They can be used to beef suspension up or raise cars that have been lowered too far when a complete tear town of the suspension is not desirable. The extended and collapsed lengths quoted do not include the bumpstop which is fitted. If this bump stop is left in place collapsed lengths will be 25mm longer. Springs for these shocks are supplied separately as the size depends on the application. When fitted to type 3 the adjustment knob can be tricky to get too.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle
AC413105Z – GAZ Coilovers, Pin Top, Eyelet Bottom, 430/280mm, Pair, Front
Description:
- Adjustable damping and rebound for tailored performance
- Pin top and eyelet bottom fittings ensure compatibility
- Maximum lengths: 432mm extended, 279mm compressed
Upgrade your vehicle’s front suspension with Gaz coilovers, designed for precision and control. Featuring pin-type fittings at the top and eyelet fittings at the bottom, these coilovers ensure a reliable fit. With maximum extended and compressed lengths of 432mm and 279mm, they are engineered for versatile performance on a variety of terrains. Adjustability is at the forefront with a built-in knob, allowing you to fine-tune damping and rebound to match your driving style.
Supplied as a pair, these coilovers deliver high-quality suspension enhancement but do not include springs, which must be purchased separately (spring part number AC413005Z. Please note, these coilovers are not compatible with 1302 or 1303 models, ensuring precise applications for other configurations.
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
Gaz adjustable coilovers have all the benefits of GAZ shock absorbers above with the addition of a height adjustable spring set. They can be used to beef suspension up or raise cars that have been lowered too far when a complete tear town of the suspension is not desirable. The extended and collapsed lengths quoted do not include the bumpstop which is fitted. If this bump stop is left in place collapsed lengths will be 25mm longer. Springs for these shocks are supplied separately as the size depends on the application. When fitted to type 3 the adjustment knob can be tricky to get too.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle
AC413108 – Front Axle Beam Spacers for Shock Absorbers
Description:
Building your own narrowed bus beam , you will need 2 spacers to move the shocks away from the endplates , these can be welded on or just bolted between the shock and the beam endplate , nice and simple .
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: T2 Bay
AC413109 – Uprated King And Link Pin Outer Urethane Bush Kit
Description:
Front axle bushes. A set of 4 polyurethane outer bush replacements for the front axle on King and Link pin models. These are cheaper and easier to replace than the original bearings and bushes. You no longer require the original style oil seals after fitting these bushes.
Compatible Vehicles: - Beetle (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Notes:Red Bushes
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC413110 – Axle Beam Outer Urethane Bush Kit
Description:
Front axle bushes. A set of 4 polyurethane outer bush replacements for the front axle on Balljoint models. These are cheaper and easier to replace than the original bearings and bushes. You no longer require the original style oil seals after fitting these bushes.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:red bushes
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC413111 – Front Sway Bar Bush Kit Urethane
Description:
Urethane front anti roll bar mount kit. Comes with all the urethane bushes and steel sleeves to replace existing mounts. Bushes are red in colour. These often solve any steering wobble problems.
For 1302/03 with 3 bolt struts
Compatible Vehicles: - Beetle (1971,1972,1973) - Beetle Cabrio (1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC413112 – Front Suspension Bush Kit Urethane 1303
Description:
Bush kit urethane 1303. Supplied as a complete kit of polyurethane bushes and steel sleeves. Often used to solve steering wobble problems. 2 Bolt models.
Compatible Vehicles: - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC413113 – Beam Bush Kit, Polyurethane, T2 Split 55-63, Red
Description: This bush kit is a direct replacement for stock installed needle bearings and bushes. The specially formulated polyurethane bushings offer years of trouble free motoring when used with supplied synthetic waterproof based grease. Now the Type 2 owners can have the improved performance that only polyurethane can provide.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963)
Notes:
Outer Diameter: Lip End - 64mm
Inner Diameter: 43-44mm
Other End - 52mm
Additional Vehicle Info: T2 Split
AC413115 – Polyurethane Bush Kit, Stock Front Beam
Description:
This bush kit is a direct replacement for stock installed needle bearings and bushes. The specially formulated polyurethane bushings offer years of trouble free motoring when used with supplied synthetic waterproof based grease. Now the Type 2 owners can have the improved performance that only polyurethane can provide.
Outer Diameter: 56mm
Inner Diameter: 50 and 43mm
Length: 80mm (into the beam)
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
End 1 inner diameter 50mm
End 2 inner diameter 43mm
Additional Vehicle Info: T2 Bay
AC413140 – Urethane Steering Coupling and Fixings
Description:
- Durable polyurethane construction for long-lasting performance
- Includes all necessary mounting hardware for easy installation
- Improves steering precision and stability for a better driving experience
Upgrade your vehicle’s steering feel and performance with this high-quality polyurethane steering coupling. Designed to replace traditional rubber components, this coupling offers enhanced durability and responsiveness, making it an ideal choice for drivers seeking a firmer, more controlled steering feel. The polyurethane material resists wear and tear, ensuring that your steering stays tight and precise over time.
This coupling comes complete with all necessary mounting hardware, simplifying the installation process. Perfect for anyone looking to improve their driving experience, it adds stability and responsiveness to your steering system, letting you enjoy a more connected, confident feel on the road.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972) - Buggy/Baja (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3
AC41343143 – KYB Excel-G Front Shock Absorber Standard Height
Description:
KYB Excel-G shock absorber to suit:
Beetle 1966> Front
Karmann Ghia 1966> Front
KYB GR2 offer a firm sporty ride and precise control.. During testing by volksworld magazine KYB shocks came out on top for performance. These are gas pressured and medium to firm ride
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:Was called GR2, but now called ''Excel-G''
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC41343144 – KYB Excel-G Shock Absorber Double Loop 265/420mm
Description:
KYB Excel-G shock absorber.
To suit:
T1 >65 front, rear all years
KG >65 front, rear all years
T2 55-79 front, >67 rear
T3 front/rear all years
KYB Excel-G offer a firm sporty ride and precise control.. During testing by Volksworld magazine KYB shocks came out on top for performance. These are gas pressured and medium to firm ride.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:Was called GR2, but now called ''Excel-G''
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC41344068 – KYB Excel-G Shock Absorber Double Loop 385/245mm
Description:
- Gas-pressurised for a medium to firm ride with precise control
- Offers a sporty, firm ride ideal for enhanced performance
- Top-rated for performance, as tested by Volksworld magazine
245mm collapsed and
385mm extended.
The KYB Excel-G shock absorber (formerly known as GR2) delivers a firm, sporty ride with exceptional control and stability. These gas-pressurized shocks are engineered for a medium to firm ride, making them ideal for those looking to improve performance and handling. Highly rated in testing, they came out on top for performance in Volksworld magazine, proving their reliability and effectiveness.
When fitting new shocks to a lowered car, it’s crucial to select the correct shock length. Ensure there’s at least 2 inches of up-and-down travel from the normal ride height. Measure the distance between the shock mountings with the vehicle on its road wheels to determine the required shock length. Before installation, remember to pump the shock absorber a few times to remove any air bubbles in the fluid, ensuring maximum effectiveness.
To suit:
Beetle up to 1965 front and rear all years
Karmann Ghia up to 1965 front and rear all years
Splitscreen 55-67 front and rear
Baywindow 68-79 front and rear
Type 3 front and rear
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
Upper hole 16.1mm (12.8mm when the supplied reducer is fitted)
lower hole 12.8mm
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC41363012 – Front Suspension Strut Insert, Gas Filled, 1302, 1303
Description:
KYB GR2 insert standard length fits standard strut outer, 1302/3 >73. Stiffer action than standard insert with gas pressurisation.
Compatible Vehicles: - Beetle (1970,1971,1972,1973) - Beetle Cabrio (1970,1971,1972,1973)
Notes:Was called GR2, but now called ''Excel-G''
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC413650720 – Lowered Double Loop Oil Filled Shock Absorber 375-245mm
Description:
- Expanded Length: 375mm, Collapsed Length: 245mm
- Designed for precise fitment, ensuring optimal suspension travel
- Ideal for lowered cars requiring correct shock length for performance
This oil-filled shock absorber is sold individually and designed to provide reliable suspension performance. With an expanded length of 375mm and a collapsed length of 245mm, it offers the right balance of firmness and control for your vehicle's suspension. It is especially important to fit the correct shock length to a lowered car, ensuring there is at least 2 inches of up-and-down travel from the normal ride height.
To determine the proper shock length, measure the distance between the shock mountings on your vehicle after removing the existing shock. This should be done with the vehicle on its road wheels (not on a jack). After measuring, compare your measurement with the shock absorbers we list to find the correct fit.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
To fit on a Mk1 Caddy, you need to add an extra sleeve as the bolt is smaller on the Caddy than it is on aircooled vehicles
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC413650721 – Lowered Front Oil Filled Shock Absorber 385-265mm
Description:
Shock absorber for Balljoint front beam. The shock is supplied with the upper bushes, washer and top nut to fit. Supplied individually
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
387mm extended / 266mm compressed
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC4139651 – Shock Absorber, Oil Filled, Stock Height, Front
Description:
Oil filled front shock absorber for stock height vehicles.
EMPI performance oil filled shock absorbers bridge the
gap between O.E. oil and gas absorbers offering a more superior road holding ride.
finished in bright white, sold individually boxed. supplied with two spacers to
fit all the applications listed. Vehicles with ball Joint suspension do not
require any additional spacers.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970,1971) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
Vehicles with ball Joint suspension do not require any additional spacers.
Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Karmann Ghia
AC4139654 – Shock Absorber, Front, Lowered Vehicles with Link Pin Beam
Description:
EMPI front gas shock absorber for lowered vehicles with link pin beam.
Sold individually but always recommended to be replaced in pairs.
Metrics
Compressed 254mm / Extended 371mm
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia
AC413KG4521 – KYB Gas-A-Just Shock Absorber Double Loop 410/265mm
Description:
- Heavy-duty shock absorbers with robust damping.
- Gas pressurised for a firm, stable ride
- Beetle and Ghia up to 1965 front and rear all years
- Splitscreen 55-67 and Type 3 Front and rear
- Baywindow 68-79 Front only
KYB Gas-A-Just shock absorbers provide exceptional durability and performance, particularly suited for Type 2 buses or the rear of smaller vehicles requiring additional support. With gas pressurisation, these shocks offer a firmer ride, improving vehicle stability and handling, making them an excellent choice for those looking to enhance their driving experience.
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC413Z001 – GAZ Adjustable Shock Absorbers, 380-265mm, Front, Rear, Pair
Description:
- Fully adjustable damping for custom suspension tuning
- 36 point external adjustment for precise control
- Gold Cadmium plated for added corrosion resistance
The GAZ GT adjustable double loop rear shock absorbers are designed for both front and rear suspension, depending on your vehicle. They offer a maximum extended length of 380mm and a maximum compressed length of 265mm. These shocks are supplied as a pair and come with a 3-year warranty, ensuring long-term performance and reliability.
Manufactured in the UK, these shocks feature fully adjustable gas dampers, allowing you to fine-tune your suspension to meet your specific needs. The easy-to-use knurled knob lets you adjust damping while the shocks are still mounted on your vehicle. Each shock is individually numbered and rigorously tested on a dynamometer, guaranteeing quality and consistency in every unit. The shocks are also fully rebuildable, making them a cost-effective choice for maintaining optimal performance over time.
Vehicle fitment - front, rear
Beetle 50-65 front and 50-79 rear
Karmann Ghia 50-65 Front and 50-79 rear
Splitscreen/Baywindow 55-79 Front and rear
Type 3 front and rear
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 50cm of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC413Z002 – GAZ Adjustable Shock Absorber, 295-235mm, Pair
Description:
- Fully adjustable damping for customized suspension setup
- 36-point external adjustment for precise tuning
- 3-year warranty for peace of mind
Gaz GT adjustable double loop shock absorbers are designed to fit both the front and rear of a variety of vehicles (refer to the fitment guide for details). Each shock features a maximum extended length of 295mm and a maximum compressed length of 235mm. Supplied as a pair, these shocks come with a 3-year warranty, ensuring long-lasting performance and reliability.
Made in the UK, Gaz shocks are fully adjustable gas shock absorbers that allow you to fine-tune your vehicle’s suspension. The easy-to-use adjustment knobs can be accessed while the shocks are fitted, giving you complete control over your ride. Each unit undergoes rigorous testing on a dynamometer, ensuring optimal performance before dispatch. The gold cadmium-plated body offers corrosion resistance, and the shocks are fully rebuildable for added longevity.
Vehicle fitment front. rear
Beetle 50-65 front and 50-79 rear
Karmann Ghia 50-65 Front and 50-79 rear
Splitscreen/Baywindow 55-79 Front- Front very low
Type 3 front and rear
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965) - Beetle Cabrio (1960,1961,1962,1963,1964,1965) - Karmann Ghia (1960,1961,1962,1963,1964,1965) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel Overall from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC413Z003 – GAZ Front Shock Absorbers, 435-320mm, Pair
Description:
- Fully adjustable damping for precise suspension tuning
- 36-point external adjustment for improved handling
- 3-year warranty and fully rebuildable for long-term use
GAZ GT adjustable pin top and eye bottom front shock absorbers are designed to enhance your vehicle's suspension. With a maximum extended length of 435mm and a compressed length of 320mm, these shocks are supplied as a pair and come with a 3-year warranty. They are specifically designed to fit Beetle models with ball joint front suspension.
These UK-made shocks offer 36 points of external adjustment, allowing you to fine-tune your suspension to meet your driving needs. The gold cadmium-plated body ensures excellent corrosion resistance, while each unit is individually numbered and tested on a dynamometer before dispatch. With integral bump stops and rebuildable construction, these shocks provide lasting performance and reliability.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC413Z004 – GAZ Front Shock Absorbers, Lowered, 345-250mm, Pair
Description:
- Fully adjustable damping for precise suspension tuning
- 36-point external adjustment for improved handling
- 3-year warranty and fully rebuildable for long-term use
GAZ GT adjustable pin top and eye bottom front shock absorbers are designed to enhance your vehicle's suspension. With a maximum extended length of 345mm and a compressed length of 250mm, these shocks are supplied as a pair and come with a 3-year warranty. They are specifically designed to fit Beetle models with ball joint front suspension.
These UK-made shocks offer 36 points of external adjustment, allowing you to fine-tune your suspension to meet your driving needs. The gold cadmium-plated body ensures excellent corrosion resistance, while each unit is individually numbered and tested on a dynamometer before dispatch. With integral bump stops and rebuildable construction, these shocks provide lasting performance and reliability.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC413Z005 – GAZ Adjustable Rear Shock Absorbers, 590-365mm, Pair
Description:
- 36-point external damping adjustment
- Fully rebuildable with corrosion-resistant body
- 3-year warranty and individually tested
Upgrade your Baywindow's suspension with Gaz GT adjustable double loop rear shock absorbers. These high-performance shocks offer a maximum extended length of 590mm and a compressed length of 365mm, ensuring a perfect fit and improved handling. Each shock is supplied as a pair and comes with a 3-year warranty for peace of mind.
Designed and manufactured in the UK, Gaz shocks are fully adjustable, allowing you to fine-tune the suspension to match your driving preferences. With a 36-point external adjustment system, you can easily modify the damping while the shocks are still fitted to your vehicle. Featuring a Gold Cadmium plated body for enhanced corrosion resistance and integral bump stops, these shocks are built to last and provide optimal performance.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: T2 Bay
AC413Z006 – GAZ Shock Absorbers, Double Loop, 400-275mm, Pair
Description:
- Adjustable damping for personalized suspension tuning
- 36-point external adjustment for precise control
- 3-year warranty with fully rebuildable design
The Gaz GT adjustable double loop rear shock absorbers offer superior performance with a maximum extended length of 400mm and a maximum compressed length of 275mm. Supplied as a pair, these shocks come with a 3-year warranty, ensuring long-lasting durability and peace of mind.
Made in the UK, Gaz shocks feature a fully adjustable gas design that allows for easy tuning of your suspension. The 36-point external adjustment can be quickly made using a knurled knob on the shock absorbers, and strut inserts also offer convenient adjustment through a removable knob. Each unit is individually numbered, tested on a dynamometer, and built to last with a gold cadmium-plated body for added corrosion resistance.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against te shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3
AC413Z007 – GAZ Shock Absorbers, Dropped Spindles, 450-340mm, Pair
Description:
- 36-point external adjustment for precise tuning
- Fully rebuildable for long-lasting performance
- Gold Cadmium plated body for corrosion resistance
The Gaz adjustable front shock absorber is designed specifically for use on vehicles with welded dropped spindles. With a maximum extended length of 450mm and a maximum compressed length of 340mm, it provides superior performance and durability. Each shock is carefully tested on a dynamometer before dispatch to ensure optimal quality, and they are supplied as a pair with a 3-year warranty.
These shocks feature a fully rebuildable design, allowing you to maintain them for years to come. The 36-point external adjustment lets you fine-tune the shock’s performance to your exact needs, while the gold cadmium plated body offers excellent protection against corrosion. Each unit is individually numbered and rigorously tested to ensure it meets high standards of reliability.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: T2 Bay,T2 Split
AC413Z008 – GAZ Front Adjustable Shock Absorbers, Pair
Description:
- 36 point external adjustment for customized performance
- Fully rebuildable with a 3-year warranty
- Gold cadmium plated body for superior corrosion resistance
The Gaz adjustable front shock absorbers are designed to provide precise control and a smooth ride for any driving situation. With a body length of 248mm, stroke of 120mm, and a range from 305mm closed to 425mm open, these shocks offer exceptional performance. Their 36-point external adjustment allows for fine-tuning, while the gold cadmium plated body ensures durability and resistance against corrosion.
Each shock absorber is individually numbered and tested on a dynamometer to ensure optimal performance before dispatch. Additionally, the shocks are fully rebuildable, making them a long-lasting investment. The integral bump stops offer enhanced protection, adding to their reliability and performance on the road.
Compatible Vehicles: - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehcile on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: T25
AC413Z009 – GAZ Rear Adjustable Shock Absorbers, Pair
Description:
- 36 point external adjustment for custom tuning
- Gold cadmium plated for superior corrosion resistance
- 3-year warranty and individually tested for quality
These Gas adjustable shock absorbers are designed for the rear of your vehicle, offering precise and customizable handling with 36 points of external adjustment. Perfect for those seeking a smooth ride or performance tuning, these shocks provide optimal control and comfort under various driving conditions. 17” open, 11.5” closed.
Built with durability in mind, the shocks feature a gold cadmium plated body for exceptional corrosion resistance. Each unit is individually numbered and tested on a dynamometer to ensure peak performance. With a 3-year warranty and fully rebuildable design, these shock absorbers offer lasting reliability for all your driving needs.
Compatible Vehicles: - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)
Notes:
It is very important to fit the correct length shocks to a lowered car. There must be at least 2 inches of up and down travel from the normal ride height. To ascertain what length you require you must measure the distance between the shock mountings on your vehicle after you have removed the existing shock. This must be done with the vehicle on its road wheels (not on a jack). Once you have measured you need to check it against the shock absorbers we list to see which ones you need.
Prior to fitting new shock absorbers always pump it through a few strokes the correct way up. This removes bubbles that may have formed in the fluid whilst in storage and improves the effectiveness.
Additional Vehicle Info: T25
AC415001 – Steering Box and Shaft Coupler
Description:
Steering Coupler between Steering box and steering column shaft.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC415109 – Billet Aluminium Steering Box Bracket
Description:
Steering box bracket, Helps to brighten up dull area on buggies and show cars. Fits all Beetles Excluding 1302/1303.
Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415669 – Steering Wheel Horn Push with Clock
Description:
Horn push clock, Fits in centre of steering wheel where horn is situated.
Clock face is 'vintage' look, supplied without SR66 battery.
Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971)
Notes:
Delivered without battery, follow the instructions below to insert or replace the battery:
- remove the large clamping ring
- push the clock out of the horn housing from below
- tip the clock cover, for this there is an excellent part on the edge of the cover
- place or replace the battery (battery type SR66 )
Additional Vehicle Info: Beetle,Type 3
AC415670 – Steering Wheel Horn Push with Clock
Description:
Horn press with battery operated clock for standard steering wheel
Compatible Vehicles: - Beetle (1956,1957,1958,1959) - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: Beetle,T2 Split
AC415801/N/A – Bare Long Tie Rod for Left Hand Drive 2" Narrowed Beam 600mm
Description:
Bare long tie rod for LHD January 1961 to 1965 when fitted with a steering damper and a narrowed beam. Includes clamp and left hand threaded nut.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet
AC415801/N/B – Tie Rod, Long, 575mm, Left Hand Drive, 2" Narrowed Beam
Description:
- Long tie rod, 575mm in length
- Includes lock nut and clamp
- Compatible with models with steering damper
This 575mm long tie rod comes with a lock nut and clamp, providing secure attachment for your steering setup. It is designed for models that are equipped with a steering damper using a 2" narrowed beam.
Made for durability, this tie rod helps maintain performance and precision. It’s a reliable replacement or upgrade part for compatible models needing a secure connection.
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415802/N/A – Bare Short Tie Rod, 220mm, LHD, 2" Narrowed Beam
Description:
220mm bare short tie rod for LHD January 1961 to 1965 when fitted with a narrowed beam. Includes clamp and left hand threaded nut.
Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965) - Karmann Ghia (1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415802/N/B – Bare Short Tie Rod, 205mm, LHD, 2" Narrowed Beam
Description:
Bare short tie rod for LHD 1965 onward when fitted with a narrowed beam. Includes clamp and left hand threaded nut.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - Beetle (1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1966,1967,1968,1969,1970) - Karmann Ghia (1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415821/N/A – Bare Long Tie Rod, 655mm. RHD, 2" Narrowed Beam
Description:
Bare long tie rod for RHD January 1961 to 1965 when fitted with a steering damper and a narrowed beam. Includes clamp and left hand threaded nut.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965) - Beetle Cabrio (1961,1962,1963,1964,1965) - Karmann Ghia (1961,1962,1963,1964,1965)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415821/N/B – Bare Long Tie Rod, 615mm, RHD, 2" Narrowed Beam
Description:
Bare long tie rod for RHD 1965 onward fitted with a steering damper and a narrowed beam. Includes clamp and left hand threaded nut.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Beetle USA (1965,1966,1967,1968,1969,1970) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415822/N/A – Tie Rod, Short, 165mm, Right Hand Drive, 2" Narrowed Beam
Description:
- 165mm short tie rod with left-hand thread
- Includes lock nut and clamp for secure attachment
- Designed for models with a narrowed beam
This 165mm short tie rod is built for a secure fit in your steering setup. It features a left-hand thread and comes with a lock nut and clamp, ensuring a firm and reliable connection. Designed for models using a narrowed beam, it helps maintain proper steering alignment.
Made for durability, this tie rod supports consistent performance and precision. Whether used as a replacement or an upgrade, it provides a strong and dependable connection for compatible vehicles.
Compatible Vehicles: - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC415840 – Bare Tie Rod for Dropped Spindles 430mm
Description:
Bare tie rod for use on vans with dropped spindles. Supplied with tie rod end clamps but no tie rod ends.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC415842 – Bare Tie Rod for 2'' Narrowed Beam 420mm
Description:
Bare tie rod for use on vans with 2" narrowed front beams. Supplied with tie rod end clamps but no tie rod ends.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC415844 – Bare Tie Rod for 4'' Narrowed Beam 395mm
Description:
Bare tie rod for use on vans with 4" narrowed front beams. Supplied with tie rod end clamps but no tie rod ends.
Designed and engineered by SSP in the U.K. and manufactured in Taiwan.
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split USA (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC425000 – Billet Aluminium Steering Damper Mount
Description:
Billet aluminium steering damper mount for use on beam axle vehicles without a steering damper mount on the front beam. King & Link Pin Axles.
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC425015 – Chrome Steering Flange Joints
Description:
Chrome plated Steering flange joints. Excluding 1302/1303
Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3
AC498000 – Suspension Handling Kit
Description:
- Enhanced suspension for Splitscreen 1955-1967
- Includes KYB gas shocks for superior handling
- Uprated front anti-roll bar for improved stability
Transform your Splitscreen from a classic ride to a dream machine with our Suspension Handling Kit designed specifically for models from 1955 to 1967. This comprehensive kit features a set of high-performance KYB gas shock absorbers that deliver a smooth and responsive driving experience, ensuring that every corner is taken with confidence.
Along with the shock absorbers, the kit includes an uprated front anti-roll bar, enhancing your vehicle's stability and overall handling. Whether you’re cruising down the highway or navigating tight turns, this suspension upgrade will elevate your Splitscreen experience to new heights. Enjoy a more controlled and comfortable ride today!
Compatible Vehicles: - T2 Split Bus (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)
Additional Vehicle Info: T2 Split
AC498001 – Uprated Suspension Handling Kit
Description:
- Complete suspension kit for Baywindow models 68-79
- KYB gas shocks for superior handling and comfort
- EMPI uprated anti-roll bars for enhanced stability
Transform your Baywindow 68-79 into a handling powerhouse with our premium suspension handling kit. This comprehensive set includes high-performance KYB gas shock absorbers and upgraded EMPI anti-roll bars, ensuring your vehicle handles like a dream on any road.
Designed for easy installation, the kit features everything you need, including front and rear shock absorbers and all necessary bushes and fixings. Experience improved ride quality and stability, allowing you to tackle twists and turns with confidence. Upgrade your Baywindow today and enjoy a smoother, more responsive driving experience.
Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)
Notes:
Front shocks are 410mm extended 265mm compressed. If your vehicle has been lowered you will need to remove the existing shocks to measure the distance between the fixing points to check fitment.
Anti roll bars
Empi front anti roll bar including bushes (uses standard clamps)
EMPI uprated rear anti roll bar includes all bushes and fixings
Additional Vehicle Info: T2 Bay
AC498002 – Performance Ball Joint Overhaul Kit for Lowered Cars
Description:
- Includes long travel ball joints for improved performance
- Complete overhaul kit for lowered cars
- Saves time and money with essential components
The Performance Ball Joint Overhaul Kit is designed specifically for lowered cars, offering a comprehensive solution for enhanced performance and durability. This kit includes upper and lower long travel ball joints, camber nuts, urethane axle bushes, and an anti-roll bar kit, ensuring all the necessary components for a complete suspension upgrade.
Heritage Kits are engineered to save you both time and money, providing everything you need in one package. Perfect for enthusiasts looking to improve their vehicle's handling and restore suspension functionality, this kit offers a high-quality, cost-effective solution for lowered car owners.
Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1965,1966,1967,1968,1969,1970) - Karmann Ghia (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
AC498100 – CSP Front Axle Beam Adjuster Kit
Description:
With help of these adjusters, you can convert your factory front beam to an adjustable one.
This CSP adjuster is characterized by the accurately machined teeth and high-quality standards.
The front beam will need to be removed and stripped prior to cutting and welding in these adjusters.
The radius of the adjusters matches the factory diameter of the axle tubes.
Two adjusters per front beam are needed.
Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974)
Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia
Replies have been locked on this page!