Fitment #49

165-941-018/K – Headlight Right for Left Hand Drive

Description:

Right headlight for left hand drive vehicles.

Compatible Vehicles: - Jetta (1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Jetta

165-959-455/AM – Radiator Fan with Motor 2 Speed 250/150 Watt 280mm Diameter

Description:

Two speed radiator fan. Adjustable between 150W and 250W. with a 3 pin connector.

280mm diameter.

To fit:
Mk1 Caddy with air con and towing facility
Scirocco from chassis 53 G 030 001>> JH Engine code
Golf/Jetta Engine codes NZ, PL, PF Diesel ME, JP
Golf/Jetta with Air Con engine codes GX, EV, EZ, GU, GZ, HW
Mk1 Cabriolet Engine codes DX, HK, JH, KT, 2H
Mk2 Syncro/Country/Variants engines codes GU, GX, RH, 1P

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Scirocco

165-959-455/L – Radiator Fan with Motor 2 Speed.

Description:

Radiator fan and motor unit. This has 2 speed settings at 100W and 60W with a 3 pin connector. 280mm

Engine code fitments:
MK1 Scirocco 74-83 FA, GF, JB, FH, FC, YJ, ZB, FD, FP, FR, EG
MK2 Scirocco 84-92 DX, EX, EW, JH, KR, RE, PL, KT, RE, HN, HK, EWA
MK1 Golf 75-83 FA, GG. FJ, GS, GF, JB, FH, CK, FP, EW, CR, JK, EG, CY, DX
MK2 Golf 84-92 AEG EZ, GU, HZ, KR, MH, PN, BP, PF, RF, RV, RH, RP,PB 2G, 9A, ABN
MK1 Golf Cabriolet 79-92 DX, EW, EX, KH, HN, KT, RE, EWA
MK1 Jetta 79-83 GG, GF, JB, FR, CR, JK, EG, CY
MK2 Jetta 84-92 HM, EV, EZ, GT, GU, GX, GZ, HZ, JP, MH, NZ, KR, PL, PN, RG, RF, RH, MH, HV
Mk1/2 Polo 75-94 HA, HE, HH, HJ, HB, HD, HC
Mk3 Polo 95-00 HA, HE, HH, HJ, HB, HD, HC

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Polo Mk1/Mk2,Scirocco

165-959-455/T – Radiator Fan with Motor 2 Speed 200/120 Watt 280mm

Description:

Radiator fan and motor unit. this has 2 speed settings at 200W/120W with a 3 pin connector.

Engine code fitments:
Mk1 Scirocco 74-83 AEG
Mk2 Scirocco 84-92 AEG, PL
Mk1 Golf 74-83
Mk2 Golf 84-92 AEG, RD, JR, EZ,GU, HM, NL, PL, PB, JP, ME, 1V, MF, RA, SB, NZ
Mk1 Golf Cabriolet 79-92 AEG,
Rallye 86-91 AEG, GU, GX, RH, 1P
Caddy 83-92 AEG, AEE, AHB, AEY
Mk1 Jetta 79-83 AEG
Mk2 Jetta 84-92 AEG, EZ, GU, HM

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Jetta (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Polo Mk3 6N (1996,1997,1998,1999,2000) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Earlier models with just a two pin, single speed fan, can still use this 3 pin, two speed fan. You'll need to connect your existing two wires to the outer two connectors on the back of the fan. A new 3 pin connector is available via the VW Classic Parts Portal on our website, please search for part number 1H0906233.

Additional Vehicle Info: 924,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Polo Mk3 6N,Polo Mk1/Mk2,Scirocco

167-831-051/C – Front Door, 5 Door, Left

Description:

High-quality replacement front door for 5-door models
Specifically designed for left-hand side installation
Genuine VW part for perfect fit and durability

Upgrade your vehicle with this genuine VW replacement front door, designed specifically for the left-hand side of 5-door models. Crafted to meet VW's high standards, this door ensures a seamless fit and long-lasting performance.

This replacement door not only enhances the appearance of your vehicle but also provides the reliability you expect from a genuine VW part. Easy to install, it’s the perfect solution for restoring your car’s functionality and style.

Compatible Vehicles: - Golf Mk2 (1988,1989,1990,1991,1992) - Jetta (1988,1989,1990,1991,1992)

Additional Vehicle Info: Golf Mk2,Jetta

167-853-753 – Left Rear Door Trim

Description: Exterior trim for the rear left door on 4 door models. The trim is 55mm and finished in black and mars red.

Compatible Vehicles: - Golf Mk2 (1984,1985,1986,1987) - Jetta (1984,1985,1986,1987)

Additional Vehicle Info: Golf Mk2,Jetta

167-898-300 – B Pillar Decal Set

Description:

Black vinyl, 4 piece B pillar sticker/decal kit. These fit on the front and rear doors (B pillar on 3 door models).

The material used is identical to the original.

Compatible Vehicles: - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Professional fitting is advised.

Additional Vehicle Info: Golf Mk2

17-1124 – Door Card Set without Door Pockets in Black Vinyl

Description:

Sleek black smooth vinyl, no pockets on door panels
Complete 4-piece set: 2 door panels, 2 rear quarter panels
Value for money

Elevate your T1’s interior with this premium TMI trim panel set, designed specifically for models from 1965 to 1979. Crafted from durable, smooth black vinyl, this set enhances the classic look with a modern touch, ensuring a seamless fit and stylish finish.

This 4-piece set includes two door panels and two rear quarter panels, providing comprehensive coverage and a uniform appearance throughout your vehicle. Installation is straightforward with the requirement of 56 trim clips, making it a hassle-free upgrade that revitalises your T1's interior.

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:Requires 56 trim clips

Additional Vehicle Info: Beetle

17-1129 – Door Card Set with Door Pockets in Black Vinyl

Description:

Sleek black smooth vinyl, with pockets in the door panels
Complete 4-piece set: 2 door panels, 2 rear quarter panels
Value for money

Compatible Vehicles: - Beetle (1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Notes:Requires 56 trim clips

Additional Vehicle Info: Beetle

170-201-075/J – Fuel Tank

Description:

47-litre capacity
Durable steel construction.
Direct fit for MK1 Caddy

Robust steel fuel tank, offering a 47-litre capacity. Engineered for durability, this tank is built to withstand the demands of daily driving while ensuring reliable fuel storage.

Designed as a direct fit for the MK1 Caddy, installation is straightforward, making it an ideal replacement for your vehicle's original fuel tank. Whether you're restoring a classic or maintaining a daily driver.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy

171-000-257/B – Sticker Tyre Pressure GTI 90x30mm

Description:

Cold tyre inflation pressure sticker for Mk1 Golf

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: Golf Mk1

171-000-257/C – Sticker Tyre Pressure GTI 68x30mm

Description:

Cold tyre inflation pressure sticker

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-000-257/F – Sticker Tyre Pressure Diesel 34x70mm

Description:

Cold tyre inflation pressure sticker for Golf Mk1 Diesel.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1

171-121-051/G – Coolant Hose Radiator to Water Pump 1.5 to 1.8

Description:

Compatible with 1.5-1.8cc petrol and some diesel engines
Connects lower radiator port to water pump
Easy installation with fitment guide

This coolant hose is designed to fit between the lower radiator port and the water pump. It's suitable for 1.5 to 1.8cc petrol engines, as well as certain diesel engines. Refer to the fitment guide for compatibility.

Engine code fitment:
Mk1 Caddy - JB, EM, EW, HN & JH, JK & ME Diesel
Mk1 Golf DX, EE, EF, EG, EH, EJ, EM, EN, EW, FN, FP, FR, FT, FV, GH, HN & JB & JJ Petrol, CR, CK, CY & JK Diesel
Mk1 Cabriolet - EM, FN, FV, FR, JB, GH, EH, EG, EN, DX, KT, EW, EX, HN, RE, EWA, JH, 2H, JJ & EJ petrol, CR, JK, CY & CK Diesel
Scirocco - EG, EE, EF, EG, EH, EM, FN, FV, FR, JB, GH, EJ, EN, JJ, EW, KT, JH, EX, HN, RE, EWA & DX petrol, CR Diesel

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-121-101/AH – Coolant Hose Top Radiator to Water Pump

Description:

Coolant hose, runs from the top of the radiator to the water pump.

Notes:1500-1800 engines. Does not fit all GTI engine codes please check

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-121-101/AM – Top Radiator Hose for K Jet

Description:

Top radiator hose for K Jet Engines with JH, DX, 2H, KT engine codes.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 Cabriolet (1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Scirocco (1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Scirocco

171-121-101/N – Top Hose From Radiator To Thermostat

Description:

Top radiator coolant hose to thermostat housing for 1.1/1.3 engines.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-121-109/E – Coolant Hose, Expansion Tank To Metal Pipe

Description:

Fits between expansion tank and metal circulation pipe
Compatible with various engine codes (see list for details)
Meyle quality with a 2-year warranty

This high-quality engine coolant hose is designed to fit seamlessly between the expansion tank and the metal circulation pipe, ensuring smooth and reliable coolant flow. Engine compatibility can be verified using the provided code list to ensure proper fitment.

Manufactured by Meyle, this hose offers exceptional durability and performance. Backed by a 2-year warranty, it is engineered to withstand harsh engine conditions, making it an ideal choice for maintaining optimal engine cooling efficiency.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-121-140/D – Coolant Hose Connecting Pipe

Description:

Connection pipe, for coolant hoses

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1987,1988,1989,1990,1991,1992) - Jetta (1979,1980,1981,1982,1983,1987,1988,1989,1990,1991,1992) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco,T25

171-121-223 – Fan Housing Flap

Description:

Flap on radiator fan shroud.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco

171-121-253/CJ – Radiator 1.1-1.3

Description:

Coolant radiator 1.1-1.3 engines

430mm core.

Fits:
Mk1 Golf 1/83-7/83 from chassis 15-D-007 001
Mk2 Golf 8/83-10/91
Mk1 Golf Cabriolet 82-93 from chassis 15-D-007 001
Mk1 Jetta 1/83-7/83 from chassis 16-D-330 001
Mk2 Jetta 7/83-10/91
Mk1 Scirocco 1/83-7/83 from chassis 53D-015 001
Mk2 Scirocco 7/83-10/91
Polo 82-90 from chassis E-000 001

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1982,1983) - Golf Mk1 Cabriolet (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Jetta (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1982,1983,1984,1985,1986,1987,1988,1989,1990) - Scirocco (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Polo Mk1/Mk2,Scirocco

171-121-253/CL – Radiator

Description:

Radiator for 1.6 diesel, 570mm in length

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-121-275/E – Fuel Pump Mount

Description:

Holds fuel pump firmly in place
Reduces vibration and wear
Compatible with various vehicle models

This fuel pump mount is designed to provide a stable and secure hold for your vehicle’s fuel pump, minimizing vibration and ensuring consistent operation. Built for durability, it helps extend the life of your fuel system components.

Notes:Mk1 Golf - Mounts the fuel pump on K-Jetronic models, 4 required.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Polo Mk1/Mk2,Scirocco

171-121-276/D – Rubber Mounting Washer

Description:

Versatile mounting washer for various VW models
Essential for radiator, air filter, and bumper installation
Perfect fit for Golf, Beetle, and Baywindow applications

This versatile mounting washer is an essential component for multiple Volkswagen models, ensuring secure and stable fittings.

Whether you're maintaining or restoring your classic VW, this mounting washer provides the reliability and fit needed to keep your vehicle's components securely in place.

Radiator Mounting in Golf derived models

Air filter assembly on Mk2 Golf GTI models

Running board fixings on Beetle

Bumper Corners on a Baywindow

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Jetta (1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Polo Mk3 6N (1996,1997,1998,1999,2000,2001,2002) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:If out of stock you can use 111-821-545

Additional Vehicle Info: Beetle,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Polo Mk3 6N,Polo Mk1/Mk2,Scirocco,T25,T2 Bay,T2 Split

171-121-277/A – Radiator Bearing Bush

Description:

Bearing bush, used in the radiator assembly.

Fits:
Mk1 Golf up to chassis >>17-B-340 738
Mk1 Golf Cabriolet up to chassis >>15-B-011 497
Mk1 Jetta up to chassis >>16-B-340 738
Scirocco up to chassis >>53-B-020 001

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982) - Golf Mk1 Cabriolet (1979,1980,1981) - Jetta (1979,1980,1981,1982) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-121-287 – Cardboard Air Duct Bottom Clip

Description:

Clip for the bottom of the left and right side cardboard radiator air duct.

Two required per vehicle

Compatible Vehicles: - Golf Mk1 (1981,1982,1983) - Golf Mk1 Cabriolet (1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1981,1982,1983)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta

171-121-407/E – Radiator Expansion Tank

Description:

Radiator expansion tank.

Square type, without a hole for a coolant level sensor.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco

171-121-407/F – Coolant Expansion Tank, Square Type, With Sensor Hole

Description:

Square design for efficient fluid storage and easy monitoring
Made from heat-resistant material for lasting use
Simple installation, fits most vehicles

The square-type coolant expansion tank offers reliable coolant storage and helps keep your engine running smoothly. Its durable, heat-resistant material ensures it can handle high temperatures, while the compact square design makes it easy to check coolant levels at a glance.

This tank is straightforward to install and is compatible with a wide range of vehicles. It’s a practical option for anyone looking to maintain their cooling system with minimal effort.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco

171-121-611/AN – Coolant Hose, Cylinder Head to Heater Matrix

Description:

Fits petrol and diesel engines
Located between cylinder head and heater matrix
Durable and reliable performance

This coolant hose is designed to fit both petrol and diesel engines. It is located between the cylinder head and the heater matrix, ensuring proper coolant flow for efficient engine cooling.

Made from high-quality materials, this hose delivers reliable performance under various conditions. It helps maintain optimal engine temperature, improving overall vehicle efficiency and longevity.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-198-000 – Service Kit for GTI

Description:

Service Kit for 1.6 and 1.8 GTI

This kit includes:
1x Oil filter
1x Air filter element
4x Spark Plugs
1x Fuel filter
1x Sump plug and washer

Compatible Vehicles: - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984)

Notes:

Mk1 Golf Cabriolet up to chassis number >>15-E-011 290

Scirocco up to chassis number >>53-E-022 075

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-198-001 – Service Kit for 1.8 GTI

Description:

Service Kit for 1.8 GTI

This kit includes:
1x Oil filter
1x Air filter element
4x Spark Plugs
1x Fuel filter
1x Sump plug and washer

1x Rocker cover gasket

Compatible Vehicles: - Caddy Mk1 (1988,1989,1990,1991,1992) - Golf Mk1 Cabriolet (1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Scirocco (1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Mk1 Golf Cabriolet from chassis 15-E-011 291>>

Scirocco from chassis 53-E-022 075>>

Caddy from chassis 14-J-007 383>>

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Scirocco

171-198-002 – Service Kit for 1.5-1.8 Carburettor Models

Description:

Service Kit for 1.5-1.8 Carburettor models

This kit includes:
1x Oil filter
1x Air filter element
1x Fuel filter
1x Sump plug and washer

1x Rocker cover gasket

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco

171-198-003 – Engine Service Kit for >1.3

Description:

Service kit for 1.0, 1.1 and 1.3 engines

This kit includes:
1x Oil filter
1x Air filter element
4x Spark Plugs
1x Fuel filter
1x Sump plug and washer

Compatible Vehicles: - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1986,1987,1988,1989,1990,1991,1992) - Jetta (1979,1980,1981,1982,1983,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1979,1980,1981,1982,1983)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Polo Mk1/Mk2,Scirocco

171-199-125/A – Engine Mount Stop Washer

Description:

Stop washer for use on the engine mountings. For 1.5-1.8 engines, 85x6mm

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-199-214 – Engine To Gearbox Mount 1.1

Description:

Engine/Gearbox Rubber Bonded Mount 60.4mm For 1.1 / 1.3 Engines.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-199-214/DF – Gearbox Mount, 64.4mm

Description:

Durable 64.4mm mount for secure gearbox support
Reduces vibration and enhances performance
Ideal for automotive and industrial applications

Description:

The Gearbox Mount 64.4mm is engineered for reliability and precision. Designed to provide a snug and secure fit, this mount ensures your gearbox remains stable even under high-stress conditions. Its robust construction minimizes vibration, helping to extend the life of your drivetrain components and improve overall performance.

Perfect for both automotive and industrial use, this mount is crafted from high-quality materials to withstand demanding environments. Whether you're upgrading your system or replacing a worn component, the 64.4mm Gearbox Mount delivers the strength and stability you need for smooth, efficient operation.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-199-214/G – Engine Mount, 74.7mm

Description:

Standard replacement engine mount, 74.6mm size
Durable design for dependable performance
Simple installation for easy replacement

This standard replacement engine mount measures 74.6mm and is designed for a reliable fit. Made for durability, it helps maintain stability and reduce vibrations, contributing to a smoother driving experience.

Installation is straightforward, making it easy to replace your old or worn mount. This engine mount is a practical choice for keeping your vehicle running smoothly and efficiently

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Can be used with WC19922-505 Bugpack Side insert bush

Can also be used in place of the 171-199-214/F which is 74.4mm

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-199-214/H – Engine Mounting 64.4mm

Description:

Engine mounting 64.4mm

Notes:Models with a 5 speed manual gearbox. Diesel engine with a 4 speed manual gearbox Automatic gearbox up to 1979

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-199-329/F – Engine Bracket Support

Description:

Support for the engine bracket.

To fit
1.5 up to 1.8 engines including GTI

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Scirocco (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-199-339 – Engine Mount Bush, Front

Description:

Reduces engine vibrations
Enhances driving comfort
Durable and long-lasting

This front engine mount bush is designed to minimize vibrations, providing a smoother ride and greater driving comfort. Built to last, it ensures your engine stays securely in place, offering reliability and performance over time.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-075/P – Fuel Tank, 40 Litre, Carburettor Engine

Description:

40L fuel tank for carburettor engine models
Perfect replacement for rusted or damaged tanks
Durable and easy to install

This 40-litre fuel tank is designed specifically for carburettor engine models, offering an excellent replacement option for your damaged or rusted tank. With its reliable construction, it ensures a steady and consistent fuel supply to your engine, allowing you to get back to work without delay.

Perfectly suited for various applications, this fuel tank is built to last and withstand the demands of everyday use. Whether you're restoring an older engine or upgrading your current setup, this replacement tank offers both convenience and peace of mind.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Notes:

Mk1 Golf Cabriolet Carburettor up to chassis number >>15-E-011 290

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-075/PF – Fuel Tank, 40 Litre for Carburettor Engine

Description:

Fuel tank 40Litre to fit carburettor engine models only not suitable for injection or diesel

Notes:

Mk1 Golf Cabriolet Carburettor up to chassis number >>15-E-011 290

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-075/QF – Fuel Tank Injection or Diesel 40 Litre

Description:

40-litre fuel tank is designed to fit both injection and diesel models
Unbaffled design; lacks the small internal flap in the filler pipe
Finished in durable silver paint

This 40-litre fuel tank is designed to fit both injection and diesel models, offering ample fuel capacity and reliable performance. It includes an internal swirl pot to ensure consistent fuel flow, although it is not baffled. The tank's filler pipe is streamlined, lacking the small internal flap found in older models.

Finished in silver paint, this tank provides a sleek, modern appearance while maintaining durability. It’s an excellent choice for replacements or upgrades, delivering essential functionality without compromising on style.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985)

Notes:

The tank isn't baffled but does have the internal swirl pot. The tank filler pipe no longer has the small internal flap. Finished in silver paint.

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-119/E – Fuel Filler Neck Seal, K-Jetronic Models

Description:

For K-Jetronic models only
Ensures secure fit
Durable and reliable

This fuel filler neck seal is specifically designed for K-Jetronic models, ensuring a secure fit between the filler neck and the body of the vehicle. Made from durable materials, it provides reliable performance and helps prevent fuel leaks.

Ideal for maintaining the integrity of your vehicle's fuel system, this seal offers both functionality and peace of mind. Its robust construction ensures long-lasting durability.

Notes:K-Jetronic injection models only.

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-119/F – Fuel Filler Neck Seal

Description:

Fits between the filler neck and vehicle body.
Prevents leaks for a reliable fuel system.
Simple installation for quick repairs.

The fuel filler neck seal is placed between the filler neck and the vehicle body. It helps stop leaks, keeping your fuel system working properly.

Installing this seal is easy and can save you time and money on repairs. It's an important part to maintain your vehicle's fuel system, giving you confidence while driving.

Notes:Carburettor models only.

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-129/F – Fuel Filler Neck

Description:

Replaces old, worn fuel filler necks
Designed for models without a catalyst
Use with connecting hose N90-119-601
For additional fuel cap please use 171-201-551/L

Replace your fuel filler neck with this high-quality part designed for Mk1 Golf and Jetta and for Cabriolet (1979-1984) models, up to Chassis 15-E-011-290. This filler neck ensures a secure and reliable fuel connection for your vehicle. To complete the installation, use it with the connecting hose N90-119-601 for the best fit and function.

This fuel filler neck is made from durable materials to provide long-lasting performance. Whether you're replacing a damaged part or performing maintenance, this component ensures your vehicle's fuel system operates effectively and efficiently. Make sure to check compatibility with your specific model before installation.

Compatible Vehicles: - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983)

Notes:Mk1 Golf Cabriolet 79-84 up to Chassis 15-E-011-290 May require slight modification to fit Cabriolet models

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta

171-201-129/FF – Fuel Filler Neck

Description:

Replaces old, worn fuel filler necks
Designed for models without a catalyst
Use with connecting hose N90-119-601
For additional fuel cap please use 171-201-551/L

Compatible Vehicles: - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984) - Jetta (1979,1980,1981,1982,1983)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta

171-201-141 – Fuel Filler Neck Support Ring

Description:

Seal / support ring for the fuel filler neck. To fit carburettor engines

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-218/C – Fuel Line, Accumulator to Main Fuel Line, K-Jetronic

Description:

Fuel line, accumulator to main fuel line for K-Jet models

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983)

Notes:Mk1 Golf Cabriolet up to Chassis >>15-E-011-290

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-201-218/D – Fuel Line, Fuel Filter to Fuel Pipe, K-Jetronic

Description:

Fuel Line, fuel filter to main fuel line for K-jet engines

Notes:Caddy up to chassis number >>14-K-009 000 Mk1 Golf from chassis number 177 3534 554>> Scirocco from chassis number 537 2080 001>>

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-201-220/D – Fuel Line, Accumulator to Fuel Pump, K-Jetronic

Description:

Fuel line, Accumulator to pump

Compatible Vehicles: - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984)

Notes:Mk1 Golf from chassis 177 3112 000>> Cabriolet up to chassis >>15-E-011 290 Scirocco from chassis 537 2014 551>> up to chassis >>53-E-022 074

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-201-245 – Protective Grommet for Fuel Line Mountings

Description:

Durable rubber grommet protects fuel lines from damage
Prevents abrasion and wear on underbody fuel pipes
Sold individually for each mounting point

This protective grommet is designed to provide essential protection for fuel line mountings under your vehicle's bodywork. Made from high-quality rubber, it shields fuel pipes from abrasion, helping to prevent wear and tear that could lead to leaks or damage over time.

Ideal for use on fuel lines, this grommet ensures a secure and safe installation, keeping your fuel system in optimal condition. Easy to install and sold individually, it offers an affordable solution for maintaining the integrity of your vehicle’s underbody fuel lines.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco

171-201-311/D – Fuel Hose Elbow Tank to Pump

Description:

Durable elbow hose for secure tank-to-pump connection
High-quality construction for leak-free performance
Ideal replacement for worn or damaged fuel hose elbows

This fuel hose elbow is designed to connect the fuel tank to the fuel pump, ensuring a secure and reliable flow of fuel. Made from high-quality materials, it’s built to withstand pressure and prevent leaks, keeping your fuel system operating safely and efficiently.

Whether replacing a worn-out part or upgrading your system, this elbow hose offers an exact fit for a hassle-free installation. It is a must-have for maintaining the integrity of your vehicle's fuel delivery system, ensuring smooth and uninterrupted performance.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-339 – Fuel Line Grommet

Description: Fuel and brake line grommet

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-515 – Fuel Accumulator Bracket

Description:

Bracket for the fuel accumulator for K-jet engines. Finished in stainless steel

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-543/B – Flexible Fuel Hose Joiner 7/11mm

Description:

Flexible rubber fuel tank joiner/connector hose
Reduces hose size from 11mm to 7mm
Durable, high-quality rubber for long-lasting use

This flexible rubber fuel tank joiner/connector hose is designed to reduce the hose size from 11mm to 7mm, providing a secure and leak-free connection. Made from durable rubber, it offers flexibility and strength, ensuring a reliable seal for your fuel system.

Perfect for various automotive applications, this hose is built to withstand fuel exposure and pressure, ensuring a long-lasting and effective solution for your vehicle’s fuel system needs. Easy to install and highly versatile, it’s an essential part for ensuring smooth fuel flow and system integrity.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983) - Golf Mk2 (1989,1990,1991,1992) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T25 (1980,1981,1982,1983,1984,1985)

Additional Vehicle Info: Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Scirocco,T25

171-201-551/L – Locking Fuel Filler Cap, Black Vented

Description:

Locking, vented fuel cap for secure fueling
For fitting info see instructions bottom of page
Fits Mk1 Golf 1975-1978 up to Chassis >>178 3187 614
Also fits Mk1 Scirocco 1974-1978 up to Chassis >>538 2040 975

This locking, vented fuel cap is designed for classic Mk1 Golf (1975-1978) and Mk1 Scirocco (1974-1978) models, up to the specified chassis numbers. The cap features a locking mechanism for added security but does not have a cover for the lock barrel, offering a more streamlined, traditional design. If you prefer this style over the later type with a lock cover, this cap can be used for any year within the model range.

Originally used on the aforementioned models, this fuel cap provides a secure seal and ensures proper venting for safe fuel storage. Its durable construction makes it an excellent choice for maintaining or restoring the fuel system to its original design, offering both practicality and an authentic look. Be sure to verify compatibility with your vehicle before use.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978)

Notes:

Mk1 Golf 1975-1978 up to chassis >>178 3187 614 Mk1 Scirocco 1974-1978 up to chassis >>538 2040 975

To install, ensure the cap is in the unlocked position, insert into filler neck and rotate clockwise almost a full turn until the stop is reached. The cap can then be locked. When locked the cap will spin freely.

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-201-651/AP – Fuel Tank Strap Kit

Description:

Durable replacement for rusted fuel tank straps
Easy installation for a secure fit
Includes a complete kit for both straps

Upgrade your vehicle’s fuel tank security with this fuel tank strap kit, supplied as a pair. Designed as a reliable replacement for rusted or damaged straps, these durable components ensure your fuel tank stays securely in place.

Installation is straightforward, allowing you to quickly restore your vehicle's safety. With this kit, you can drive with confidence knowing your fuel tank is properly secured, enhancing both performance and safety on the road.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984)

Notes:Scirocco - models up to chassis >>53-E-022 074 Mk1 Golf Cabriolet - >>15-E-011 290

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-201-681/D – Protective Ring For Fuel Filler, Self Adhesive.

Description:

Protective self adhesive ring for the fuel filler.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-253-115 – Sealing Ring for the Downpipe to Manifold

Description:

Exhaust downpipe gasket sealing ring. Fits models with a round downpipe

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Scirocco (1979,1980,1981,1982,1983) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Scirocco,Transporter T4

171-253-147 – Exhaust Rubber

Description: OE type exhaust rubber.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-253-209 – Exhaust Silencer, Front, GTI and Turbo Diesel

Description:

Improves exhaust flow for smoother operation
Durable construction for reliable use
Fits GTI and turbo diesel engines

This front exhaust silencer is designed specifically for GTI and turbo diesel models, enhancing exhaust flow and ensuring a smoother operation. It's an excellent choice for drivers looking to maintain their vehicle’s efficiency and comfort on the road.

Crafted with durability in mind, this silencer can withstand tough conditions, providing reliable performance over time. Its compatibility with GTI and turbo diesel engines makes it a practical upgrade for your exhaust system.

Compatible Vehicles: - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1977,1978,1979,1980,1981,1982,1983)

Notes:Mk1 Golf Cabriolet up to chassis >>15-E-011 290 Scirocco up to chassis >>53-E-022 074

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-253-209/A – Exhaust Middle Silencer for 1.3

Description:

Middle silencer for 1.3 engines

Compatible Vehicles: - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1979,1980,1981,1982,1983)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-253-609/A – Exhaust Silencer, Rear, 1.6 GTI

Description:

Perfect fit for 1.6 GTI models
Durable construction for long-lasting performance
Easy installation for a hassle-free upgrade

Upgrade your 1.6 GTI with our standard replacement rear exhaust silencer. Designed to provide an optimal fit, this silencer enhances exhaust flow and ensures a smooth, efficient operation. Its durable construction guarantees longevity, making it a reliable choice for performance enthusiasts.

Installation is straightforward, allowing you to quickly replace your old silencer and enjoy improved sound and efficiency. Experience the difference in your vehicle's performance and enjoy the road ahead with confidence

Notes:1.6 EG from EG 065 001>>

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-253-609/C – Exhaust Silencer, Rear, 1.1-1.6 Carburettor Engines

Description:

Designed for carburettor and diesel engines (1.1 to 1.6L)
Reduces noise levels for a quieter driving experience
Durable construction for long-lasting use and reliability

Upgrade your engine with our Rear Exhaust Silencer, specifically designed to fit carburettor and diesel engines ranging from 1.1 to 1.6. This silencer significantly reduces unwanted noise, allowing for a more pleasant driving experience.

Constructed with high-quality materials, this exhaust silencer ensures durability and reliability, making it an excellent choice for those looking to improve their vehicle's exhaust system. Easy to install and compatible with a wide range of engine models, this product is a smart investment for any car enthusiast.

Notes:Mk1 Scirocco 74-81 from chassis F 53 B 000-001 to >> 53 B 050-000

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-253-609/L – Exhaust Silencer, Rear, 1.8 GTI

Description:

Improves exhaust flow for better performance.
Built from high-quality materials for durability.
Designed for easy installation and a perfect fit.

Enhance your 1.8 GTI with our rear exhaust silencer, designed to improve performance and provide a sportier sound. This silencer helps optimise exhaust flow, allowing your engine to operate more efficiently.

Made from durable materials, it is built to withstand daily use and enhance your driving experience. The straightforward installation process ensures you can quickly enjoy the benefits without complications.

Compatible Vehicles: - Golf Mk1 (1982,1983) - Golf Mk1 Cabriolet (1982,1983,1984) - Jetta (1982,1983)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta

171-399-141 – Rear Gearbox Mount Bracket 1.5-1.8

Description: Rear gearbox mount bracket 1.5-1.8

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-399-151/A – Gearbox Mount, Rear

Description:

Compatible with manual and automatic petrol models
Durable construction for long-lasting performance
Easy to install for a perfect fit

This rear gearbox mount is designed to fit both manual and automatic petrol models, ensuring reliable performance. Made from high-quality materials, it offers durability and stability for your vehicle's gearbox.

Installation is straightforward, allowing for quick and hassle-free mounting. Whether you're replacing a worn part or upgrading your system, this gearbox mount is the perfect solution for a smooth and dependable ride.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-399-151/B – Rear Gearbox Mount

Description:

Rear engine/transmission mount for diesel engine

Notes:Scirocco - Models with an automatic gearbox only.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-153/D – Front Wishbone without Bushes, Left or Right

Description:

Versatile fit for left or right-hand side applications.
Durable construction designed for long-lasting performance.
Easy installation to streamline your replacement process.

Upgrade your vehicle's suspension with our front wishbone, engineered to provide a reliable fit for both left and right-hand side applications. Made from high-quality materials, this wishbone ensures durability and strength, making it an excellent choice for enhancing your vehicle's handling and stability.

Installation is straightforward, allowing you to replace your old wishbone quickly and efficiently. Enjoy the confidence of a well-performing suspension system, knowing that you’ve chosen a product designed for optimal functionality and longevity.

Notes:

Use with bush kit 171-498-153/S

Additional Vehicle Info: 924,944,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-153/DAS – Front Wishbone Kit, Left or Right

Description:

Complete wishbone kit for left or right side installation
Includes all necessary bushes, ball joint, and mounting clamp
Durable construction for enhanced vehicle performance and stability

Upgrade your vehicle's suspension with our Front Wishbone Kit, designed for both left and right-hand side installation. This comprehensive kit contains everything you need, including all bushes, a high-quality ball joint, and a mounting clamp, ensuring a hassle-free replacement process.

Engineered for durability and performance, this wishbone kit enhances your vehicle's stability and handling. Whether you're a DIY enthusiast or a professional mechanic, this all-in-one solution makes repairs quick and efficient, keeping your vehicle on the road for longer.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - 924 (1976,1977,1978) - Scirocco (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Wont fit 74.> 77 Models as they have a 15mm Ball joint

Additional Vehicle Info: 924,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-181/A – Front Wishbone Rear Bush

Description:

Lower front wishbone rear bush, left or right.

Additional Vehicle Info: 924,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-182/D – Front Wishbone Front Bush

Description:

Lower wishbone front bush, left or right. 32mm.

Additional Vehicle Info: 924,944,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-239/A – Front Suspension Arm Bush Bolt Spring Washer

Description:

Spring washer for the front suspension arm bush

One used on the top suspension leg bolt, and 2 used on the bottom suspension leg bolt.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-265 – Eccentric Bolt, Front Suspension Strut

Description:

Designed for front suspension struts
Replaces the upper eccentric retaining bolt
Ensures secure suspension installation

This front suspension strut eccentric retaining bolt is designed for the upper position, offering an ideal replacement for your vehicle's suspension system. It works in conjunction with the lower bolt to secure the suspension strut in place.

Made with precision, this bolt helps maintain the integrity of your vehicle’s suspension, ensuring a reliable and stable ride. Perfect for those looking to repair or replace a worn-out retaining bolt in their suspension system.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Use washer 171407267 and nut N0111351 (VW applications) or N0221414 (Porsche applications) if required.

Additional Vehicle Info: 924,944,968,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-267 – Eccentric Washer, Front Suspension Strut

Description:

Designed for front suspension strut
Upper eccentric washer for precision fit
Durable construction for reliable performance

This front suspension strut eccentric washer is designed for the upper section of your vehicle's suspension. It ensures proper alignment and function of the strut, contributing to smooth handling and stability.

The washer is built for durability and long-lasting performance, providing a precise fit to enhance suspension efficiency. Replace your worn or damaged washer to restore the functionality of your suspension system.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - 968 (1992,1993,1994,1995) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 924,944,968,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-277 – Front Hub Thrust Washer

Description:

Front hub thrust washer. Sits behind the hub nut. 2 required per vehicle

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998,1999,2000,2001,2002) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Polo Mk3 6N (1996,1997,1998,1999,2000,2001,2002) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Golf Mk3 Cabrio,Jetta,Polo Mk3 6N,Polo Mk1/Mk2,Scirocco,Vento

171-407-365/C – Lower Ball Joint, Front, 15mm

Description:

Front lower ball joint for the wishbone, 15mm.

To fit:
Golf Mk1 1976-1977 up to Chassis 178 3173 583 check size
Scirocco 1974-1977 up to Chassis 538 2028 902 check size
924 2.0 1976-1977

Compatible Vehicles: - Golf Mk1 (1975,1976,1977) - 924 (1976,1977) - Scirocco (1974,1975,1976,1977,1978)

Additional Vehicle Info: 924,Golf Mk1,Scirocco

171-407-365/FG – Ball Joint, Front, Lower, 17mm, Standard

Description:

Exceptional performance with true-to-OE quality
Robust construction for fewer maintenance issues
2-year guarantee for peace of mind

The Meyle standard 17mm front lower ball joint delivers exceptional performance with true-to-OE quality. Designed to provide a precise fit, this high-quality component ensures your vehicle operates smoothly and efficiently. Its robust construction means you'll experience fewer maintenance issues, allowing you to enjoy a more reliable driving experience.

With a 2-year guarantee, the Meyle ball joint offers peace of mind, affirming its durability and dependability. Trust in Meyle’s superior craftsmanship to maintain the safety and efficiency of your vehicle, making this investment a smart choice for long-lasting performance.

To fit:
Golf Mk1 1976-1977 check size
Golf Mk1 1978-1983 from Chassis 178 3173 584
Golf Mk1 Cabriolet 1979-1993
Caddy Mk1 1983-1992
Scirocco 1974-1977 check size
Scirocco 1978-1992 from Chassis 538 2028 903

924 2.0 1978-1985
924S 2.5 1986-1988
944 1982-1985

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - 924 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985) - Scirocco (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:2 Required Per Vehicle

Additional Vehicle Info: 924,944,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-407-643/A – Front Hub Nut

Description:

Front hub nut M20x1.5

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998,1999,2000,2001,2002) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk1/2 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Golf Mk3 Cabrio,Jetta,Polo Mk1/Mk2,Scirocco,Vento

171-411-105/G – Front Suspension Coil Spring

Description:

Front spring Top quality Meyle

Compatible Vehicles: - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Polo Mk1/2 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - Scirocco (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Polo Mk1/Mk2,Scirocco

171-411-313 – Anti-Roll Bar Bush, Inner, Front

Description:

Enhances stability and reduces body roll
Durable material for long-lasting performance
Precision fit for easy installation

The front anti-roll bar inner bush improves vehicle handling by reducing body sway and enhancing cornering stability. Made from high-quality materials, it ensures durability and a precise fit for effortless installation.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-411-314/A – Anti-Roll Bar Bush, Outer, Front

Description:

Enhances stability and reduces body roll
Durable material for long-lasting performance
Precision fit for easy installation

The front anti-roll bar outer bush improves vehicle handling by reducing body sway and enhancing cornering stability. Made from high-quality materials, it ensures durability and a precise fit for effortless installation.

Additional Vehicle Info: 924,944,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-411-331 – Front Anti Roll Bar Inner Top Clamp

Description:

EDM coating for durability and rust resistance
Compatible with standard and aftermarket roll bars
High-quality fitment from trusted SSP manufacturer

Enhance your vehicle's handling with the Front Inner Anti Roll Bar Top Clamp. Designed to fit both standard and aftermarket anti roll bars, these clamps are essential for a secure and stable performance. Each vehicle requires two clamps, ensuring a complete and robust installation.

Finished with an EDM coating, these clamps are built to withstand the elements and resist corrosion, offering long-lasting reliability. Manufactured by SSP, they guarantee superior quality and precise fitment, making them a dependable choice for any performance upgrade.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Use with lower clamp 171-411-337

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-411-333/A – Anti Roll Bar Front Top Clamp

Description:

Secure outer top clamp for front anti-roll bar bush.
Attaches to wishbone for stable performance.
Ensures proper fitment and enhanced handling.

This outer top clamp is designed for securing the front anti-roll bar bush to the wishbone, providing stable and reliable attachment. It ensures proper alignment and fitment, contributing to improved handling and reduced body roll.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-411-337 – Anti Roll Bar Front Inner Lower Clamp

Description:

Securely holds the front inner anti-roll bar bush in place.
Durable design for reliable performance and stability.
Ensures proper fit and easy installation.

This lower clamp is essential for securing the front inner anti-roll bar bush, maintaining stability and performance in your vehicle's suspension system. Engineered for a precise fit, it ensures the anti-roll bar bush stays firmly in place, preventing unwanted movement during driving, for use with clamp 171-411-331

Notes:

Use with 171-411-331

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-031//2 – Front Suspension Strut Insert Oil Filled

Description:

Front shock insert, oil pressurised. To be used with the original standard strut housing

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-031/J – Bilstein B4 Front Shock Absorber, Gas

Description:

Reliable OE-quality shock absorber for consistent performance
Enhanced traction with BILSTEIN gas-pressure technology
Delivers smooth, day-one driving experience

The Bilstein B4 standard front gas shock absorber is engineered to bring back the original handling and comfort of your vehicle. Designed as a premium-quality replacement, it offers maximum stability and safety, giving you confidence on the road under any load. This shock absorber guarantees precise handling and high traction, making it an ideal choice for those seeking a blend of performance and reliability.

With its advanced gas-pressure technology, the Bilstein B4 ensures constant damping power and an optimal driving feel, even on challenging terrains. Whether for everyday driving or longer journeys, this shock absorber consistently delivers, maintaining the smoothness and control of your ride as if it were brand new.

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-032/G – Front Suspension Strut Insert Gas Filled

Description:

Replacement gas pressurised shock insert for the front strut. To be used with the original standard strut housing

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

It is always recommended to replace shock absorbers in pairs on the same axle to maintain optimal vehicle stability.

Please ensure that all original equipment (OE) design bump stops and dust covers are correctly installed.

Where OE components are unsuitable, Bilstein will supply appropriate alternatives.

Do not trim or modify bump stops to increase suspension travel, as this can negatively impact the performance and lifespan of the shock absorber.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-329/A – Strut Top Mount, Front

Description:

Fits left or right side, supplied individually
High-quality Meyle product
Includes 2-year warranty

Upgrade your vehicle's suspension system with this top-quality Meyle front suspension top mount. Designed to fit either the left or right-hand side, this mount is supplied in singles, ensuring precise compatibility and convenience for various repair needs. Its durable construction promises long-lasting performance, enhancing your driving experience by improving handling and comfort.

Meyle’s commitment to excellence is backed by a 2-year warranty, providing peace of mind and assurance of its superior craftsmanship. Whether you're replacing a worn-out part or upgrading for better performance, this front suspension top mount is a reliable choice for maintaining your vehicle’s optimal condition.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-341 – Front Upper Spring Seat

Description:

Front suspension upper spring disc retaining cup

G1 >> chassis 179 3669 622

SC1 >> chassis 539 2200 000

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979) - Scirocco (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Golf Mk1,Scirocco

171-412-341/A – Front Suspension Upper Spring Retaining Cup

Description:

Securely holds the upper spring in place for stability
Direct fit for Mk1 Golf, Scirocco, Cabriolet, and Jetta
Durable construction ensures reliable suspension performance

This front suspension upper spring retaining cup is designed to provide secure positioning for the upper spring, ensuring stability and proper alignment within your vehicle’s suspension system. It’s compatible with specific Mk1 models, including the Golf, Scirocco, Cabriolet, and Jetta, based on the given chassis numbers.

Crafted from durable materials, this retaining cup guarantees long-lasting performance and helps maintain the integrity of your suspension system. Perfect for replacing worn or damaged parts, it ensures your vehicle’s suspension operates smoothly for enhanced handling and safety.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1980,1981,1982,1983) - Scirocco (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Golf from chassis 179 3669 623>>

Mk1 Scirocco from chassis 53A 000 001>>

Mk1 Golf Cabriolet from chassis 15A 0800 001>>

Mk1 Jetta from chassis 16A 0000 001>>

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-359/01C – Suspension Strut Top Mount Cover

Description:

Front suspension strut top mount cover.

Manufactured exclusively for SSP as the genuine version is now obsolete.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-412-369 – Front Suspension Strut Washer

Description:

Washer, 22x14.2x2, This washer fits the strut below the top mount spring disc

Compatible Vehicles: - Beetle (1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Polo Mk3 6N (1996) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Jetta,Polo Mk3 6N,Scirocco,Vento

171-419-063 – Steering Rack, Non-Power Assisted, Left Hand Drive

Description:

Left hand drive, non-power assisted steering rack.

Compatible Vehicles: - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Scirocco (1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Mk1 Golf 77-83 From chassis F 178 3058 450>> Mk1 Scirocco 77-83 from chassis F 538 2009 474>> Mk2 Scirocco 84-92 Mk1 Golf Cabriolet 79-93 Mk1 Jetta 79-83 Caddy 83-92

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Scirocco

171-419-341 – Steering Column Plastic Support Ring

Description:

Plastic support ring for steering column
Replaces the metal steering column top support bush
Fits behind the upper bearing for stable support

This plastic support ring is designed for use in the steering column, replacing the original metal type steering column top support bush. It fits securely behind the upper bearing, ensuring reliable support and stability for your steering system.

Ideal for restoring or maintaining your vehicle’s steering column, this durable plastic support ring offers a cost-effective and efficient solution. Whether you choose the metal or plastic version, both perform the same essential function, providing smooth and stable steering performance.

Compatible Vehicles: - Beetle (1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979) - Beetle Mexico (1994,1995,1996,1997,1998,1999) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1981,1982,1983,1984,1985,1986,1987,1988,1989) - Golf Mk2 (1984,1985,1986,1987,1988,1989) - Jetta (1981,1982,1983,1984,1985,1986,1987,1988,1989) - Karmann Ghia (1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Supersedes metal version of part number 111-953-535/D
T1 Beetle from chassis 155 2259 793
Karmann Ghia from chassis 115 2259 793
Mk2 Scirocco 84-88 up to Chassis 53 K 002 789

Additional Vehicle Info: 924,944,Beetle,Beetle Mexico,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Karmann Ghia,Scirocco,T25

171-419-517 – Needle Bearing, Steering Column, Lower

Description:

Designed for smooth steering movement
Durable needle bearing for reliability
Easy to install at the bottom of the column tube

This lower steering column needle bearing is a crucial component located at the bottom of the steering column tube. It ensures smooth and precise steering control, offering durability and long-lasting performance.

Ideal for replacement or maintenance, this bearing is engineered to deliver reliable function, keeping your steering system in optimal condition. Its simple design allows for an easy and secure installation, making it a great choice for vehicle repairs.

Notes:Fits both power steering and non-power steering models.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-419-517/A – Lower Steering Column Bearing Retainer

Description:

Specially made sleeve to retain plastic bearing cage in the tube
Prevents failure, offering cheap insurance for hard-to-reach parts
Black oxide finish for an OEM look when installed
Easy installation—no need to remove the steering column if race is intact

This specially designed sleeve helps retain the plastic bearing cage within the tube and prevents potential failure, offering a cost-effective solution for hard-to-reach parts. With its black oxide finish, it looks just like an OEM part when installed, providing a factory-fresh appearance.

The split sleeve is precisely machined to fit over the column shaft, securing the bearing in place. While the plastic casing of the bearing is often the part that fails, the bearing itself is typically still in good condition. If the lower bearing is damaged, this sleeve will not fix the issue. This part is a real time-saver—there’s no need to remove the entire steering column as long as the race remains intact on the shaft, making installation quicker and simpler.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Easy Install: Split sleeve apart, and install sleeve flush to the bearing, with the cap screws parallel to the flats on steering column.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-419-517/B – Lower Steering Column Bearing

Description:

Designed for smooth steering movement
Durable needle bearing for reliability
Easy to install at the bottom of the column tube

Ideal for replacement or maintenance, this bearing is engineered to deliver reliable function, keeping your steering system in optimal condition.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Jetta (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Corrado - to fit up to chassis >>50-R-015 000

Additional Vehicle Info: Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Jetta,Scirocco

171-419-518/A – Steering Column Shaft Lower Inner Bearing Race

Description:

Fits on steering column shaft
Provides a surface for lower needle bearing
Durable and high-quality construction

This steering column shaft lower inner bearing race is designed to fit seamlessly onto the steering shaft. It ensures smooth operation by providing a solid surface for the lower needle bearing to run on.

Constructed with durability in mind, this bearing race is built to withstand the rigours of everyday driving. It's an essential part for maintaining proper steering function and vehicle control.

Notes:Fits both power steering and non-power steering vehicles.

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco

171-419-523 – Boot for Steering Column LHD w/o PAS

Description:

Protects steering column UJ and rack
Essential for Golf Mk1, Caddy, Scirocco
For LHD vehicles without power steering

The steering column boot is designed to protect the steering column universal joint (UJ) and steering rack from dirt and water ingress. This component is essential for any restoration project involving Golf Mk1, Caddy, and Scirocco models. Regularly checking and replacing a split or missing boot can prevent more costly repairs down the line.

This boot is a faithful reproduction of the original part, ensuring a perfect fit and reliable protection. It is suitable for left-hand drive (LHD) vehicles without power steering, making it an ideal choice for maintaining the integrity and performance of your classic car.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 Rabbit (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Scirocco