Fitment #167

AC6019761 – EMPI Race-Trim Off Road Wheel 4x15", 5x205 PCD, ET-19

Description: Race-Trim machine finished 5 spoke aluminium off road wheel.
This wheel is 4x15" and has an offset of ET-19. It has a 5x205 PCD

This wheel is not TUV certified.

This wheel is not TUV certified.

Compatible Vehicles: - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Buggy/Baja

AC6019762 – EMPI Race-Trim Off Road Wheel 6.5x15", 5x205 PCD, ET-32

Description: Race-Trim machine finished 5 spoke aluminium off road wheel.
This wheel is 6.5x15" and has an offset of ET-32. It has a 5x205 PCD

This wheel is not TUV certified.

Compatible Vehicles: - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Buggy/Baja

AC601AD01 – Wheel Adapter 5x112 Vehicle to 5x205 Wheel

Description:

Convert 5x112 to 5x205 for classic wheel fitment
9.5mm thick adapters with M14x1.5 tapped holes
Perfect for T2/Vanagon bus rear drum installation

Wheel adapters is the ideal solution for T2/Vanagon bus owners looking to fit classic 5x205 wheels on a 5x112 bolt pattern. These 9.5mm thick adapters are specifically designed to bolt onto the rear drums, allowing for a seamless and secure fitment of vintage-style wheels.

Each adapter features M14x1.5 tapped holes for easy installation, ensuring a reliable connection between your vehicle and the wheels. Whether you're restoring a classic bus or just want to switch up your wheel style, these adapters provide a convenient and durable way to achieve the look you desire.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Vanagon (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Drum to hub securing bolt needs to be removed. Rear fitment only as they will foul the calipers.

Additional Vehicle Info: T25,T2 Bay

AC601C001 – Centre Cap in Chrome for SSP 914 or Sprintstar Wheel

Description:

Chrome centre cap for SSP 914 or Sprintstar alloy wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Notes:Sold individually. Chrome effect plastic with sprung metal retaining ring.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC601C002 – Flat Centre Cap for SSP BRM Wheel

Description:

Flat type centre cap for SSP BRM wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Brazil Kombi,Buggy/Baja,Karmann Ghia,Trekker,T25,T2 Bay,T2 Split,Type 3

AC601C003 – Tall Centre Cap for SSP BRM Wheel

Description: Tall type centre cap for SSP BRM wheels.

Used on T2 Split and T2 Bay buses to clear the hub nuts / spindle nuts.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Brazil Kombi (1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Brazil Kombi,T25,T2 Bay,T2 Split

AC601C004 – Centre Cap for SSP Torque Wheel

Description:

Centre cap for SSP Torque wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967)

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay,T2 Split

AC601C005 – Centre Cap for SSP GT 5 Spoke or Crest Wheel

Description:

Centre cap for SSP GT 5 spoke or Crest wheels.

Notes:Sold individually. For fixing screws please see part number AC601S005.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC601C006 – Centre Cap for SSP Raider Wheel

Description:

Centre cap for SSP Raider wheels.

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet

AC601C008 – Centre Cap for SSP GT 8 Spoke Wheel

Description:

Centre cap for SSP GT 8 spoke wheels.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Sold individually. For fixing screws please see part number AC601S005.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601C009 – Centre Cap for SSP Cosmic Wheel

Description:

Centre cap for SSP Cosmic wheels.

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601C010 – Centre Cap for SSP Slot Mag Wheel

Description:

Centre cap for SSP Slot Mag Wheels.

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601C911 – SSP Chrome Centre Cap for SSP 'Fooks or 'Gas Burner' Style Wheels

Description:

Chrome centre cap for SSP Fooks or Gas Burner wheels
Made from durable materials with a polished chrome finish
Designed for a secure and precise fit

This SSP chrome centre cap is a great addition to your SSP Fook or Gas Burner wheels. It provides a clean, polished look while ensuring a snug and secure fit.

Built for durability, this cap is made from quality materials with a smooth chrome finish. It's easy to install and designed to match your wheels perfectly.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:

Sold individually.

Cap dimensions

- Outer 77.95mm

- Inner 68.7mm

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC601C911A – CSP 911 Style Wheel Centre Cap Chrome Tall

Description: Centre Cap Tall for 911 style wheels. Chrome plastic Hat shape.
Typically used to clear hub nuts / spindle nuts on T2 Split / Bay buses, or rear hub nuts on beetles where spacers/adapters have not been used.

Notes:Will not fit SSP Fooks

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601D540A – Flat4 BRM Wheel Centre Cap

Description:

Flat 4 centre cap for use on Flat 4 BRM wheels. Each

Compatible Vehicles: - Beetle Australia (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Brazil/Fusca (1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996) - Beetle Mexico (1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004) - Beetle USA (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: Beetle,Beetle Mexico,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601D594A – Flat4 Enkei Dish Alloy Wheel, 5.5x15'', 5x205 PCD, ET23

Description:

15"x5.5" aluminum wheel with classic dish design
4" backspace, ET23 offset, and chrome valve included
Comes complete with a center cap for a refined finish

Flat 4 and Enkei have collaborated to bring back the timeless style of 1970s dish wheels. This 15-inch aluminum wheel features a refined 5.5-inch width, 4-inch backspace, and an ET23 offset for an ideal fit on classic vehicles. Complete with a chrome valve and center cap, it offers both vintage appeal and modern reliability.

Enkei, pioneers of aluminum wheel production since the late 1960s, lent their expertise to this project, blending nostalgia with precision engineering. Designed specifically for VW enthusiasts, the wheel embodies decades of knowledge and passion, making it a perfect choice for restoring or upgrading your classic ride.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Notes:The wheel does not come with bolts these can be purchased separately under part number AC601SB34

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601DR739A – Flat4 Enkei Dish Alloy Wheel Centre Cap for 5x205 Stud Patten

Description: Flat 4 centre cap to fit Flat 4 Enkei 5x205 Dish wheels. Each

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970) - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Notes:Only to fit 5x205 wheels. Not 4x130

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC601LB111 – Locking Wheel Bolts M12x1.5 35mm Radius

Description: Locking Wheel Bolt Set, M12x1.5 Radius Seat, 35mm. Supplied in a set of 4 Bolts with key

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601LB113 – Locking Wheel Bolts M12x1.5 33mm Tapered

Description: Locking Wheel Bolt Set, M12x1.5 Tapered Seat, 33mm. Supplied in a set of 4 Bolts with key

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601LB116 – Locking Wheel Bolts M14x1.5 28mm Set of 4 Radiused

Description: Locking Wheel Bolt Set, M14x1.5 Radius Seat, 28mm. Supplied in a set of 4 Bolts with key

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601LB150 – Locking Wheel Bolts, M14x1.5 32mm Tapered

Description: Locking Wheel Bolt Set, M14x1.5 Tapered Seat, 32mm. Supplied in a set of 4 Bolts with key.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1967,1968,1969,1970,1971,1972,1973) - Type 4 (1968,1969,1970,1971,1972,1973,1974) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T25,T2 Bay,T2 Split,Type 3

AC601LB163 – Locking Wheel Bolts M14x1.5 50mm Set of 4 Radiused

Description: Locking Wheel Bolt Set, M14x1.5 Radius Seat, 50mm. Supplied in a set of 4 Bolts with key

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Transporter T4,T2 Bay,T2 Split,Type 3

AC601LBT25 – Locking Wheel Nut & Stud Kit for T25, M14x1.5 Tapered

Description:

Locking Wheel Stud & Nut set for T25 models with studs on the rear.

This set includes a set of 4 locking wheel nuts M14x1.5 with Taper seat, and 2 wheel studs to mount to the front hubs.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Compatible Vehicles: - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:

For wheels with 60degree tapered seat,

Not suited for BRM wheels

Additional Vehicle Info: T25

AC601LN101 – Locking Wheel Nut Set 1/2'' Tapered

Description: Thatcham Approved locking wheel nut set. Supplied in a set of 4 nuts with key and 4 wheel nut covers. To suit 1/2" UNF wheel studs, on wheels with a tapered seat.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601LN164 – Locking Wheel Nut Set M14x1.5 Radiused

Description: Thatcham Approved locking wheel nut set. Supplied in a set of 4 nuts with key and 4 wheel nut covers. The Nuts themselves are Black. The key is Silver. M14x1.5 Radiused

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC601LN166 – Locking Wheel Nut Set M14x1.5 Tapered

Description: Locking wheel nut set. Supplied in a set of 4 nuts with key and 4 wheel nut covers. M14x1.5 Tapered

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Notes:

60 ft/lb max tightening torque

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601S001 – Centre Cap Sticker with SSP Logo 43mm

Description:

Designed to fit GT 5 or 8 spoke SSP alloy wheels
Features crisp SSP logo for a clean, professional finish
Easy to apply – perfect for restoring or customising

This centre cap sticker is made to fit the hub caps of SSP GT 5 and 8 spoke wheels, adding a sharp, branded touch to your wheel setup. Featuring the SSP logo, it’s ideal for completing the look of your classic or custom VW.

Made from durable, weather-resistant material, the sticker is easy to apply and built to last.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - Type 4 (1968,1969,1970,1971,1972,1973,1974) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC601S002 – Centre Cap Sticker with SSP Logo 45mm

Description:

Centre cap sticker with SSP logo for 914 or Sprintstar wheels.

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

AC601S005 – Stainless Steel Socket Head Screw M4x10

Description: Stainless Steel Socket Head Screw M4x10.

These bolts are used to attach the centre caps to SSP GT-5 Spoke, GT-8 Spoke or Crest alloy wheels.

Notes:Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

AC601SB00 – Wheel Bolt M14x1.5 50mm Tapered

Description:

Wheel bolt tapered M14X1.5 50mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please give us a call

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Transporter T5,Transporter T6,T2 Bay,T2 Split

AC601SB05 – Wheel Bolt M12x1.5 20mm Tapered

Description:

M12x1.5 size with a 20mm length, tapered seat style
10.9 grade for high strength and durability
Ideal for use with certain aftermarket wheels

This M12x1.5 wheel bolt features a 20mm length and a tapered seat, designed for use with some aftermarket wheels. Made from high-strength 10.9 grade material, it ensures reliable performance and durability under stress.

Perfect for replacing or upgrading wheel bolts on your vehicle, these bolts provide secure fastening and are a great choice for custom wheels and aftermarket setups.

Notes:

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601SB05T – Wheel Bolt M12x1.5 22mm 10 Point Tapered

Description: Zinc plated steel wheel bolt. Each. M12x1.5 22mm Tapered

These 'tuner' wheel bolts are used when access is limited around the bolt hole of the wheel and where a traditional hex-head bolt & socket wouldn't work.

We also sell the tool for fitting/removing these bolts; item AC601T001A

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Corrado,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,Type 3

AC601SB08R – Wheel Bolt M14X1.5 21mm Radius

Description:

M14 x 1.5 thread, 21mm shaft length
17mm hex head with radius seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel bolt features a radius seat, M14 x 1.5 thread, and a 21mm shaft length, making it ideal for a wide range of vehicles requiring this specification. The 17mm hex head ensures easy installation and removal with standard tools.

Choosing the correct wheel bolt is critical for vehicle safety. Using the wrong type can lead to brake interference, wheel damage, or even wheels detaching while driving. This bolt provides the secure, proper fitment you need for peace of mind on the road.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T25,T2 Bay,T2 Split,Type 3

AC601SB09 – Wheel Bolt M12x1.5 22mm Tapered

Description:

Wheel bolt tapered M12X1.5 22mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please give us a call

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Type 3 (1962,1963,1964,1965)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB10. – Wheel Bolt M12x1.5 26mm Tapered

Description:

Wheel bolt tapered M12X1.5 26mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please give us a call

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB10R – Wheel Bolt M12x1.5 26mm Radius

Description:

M12 x 1.5 thread, 26mm shaft length
17mm hex head with radius seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel bolt features a radius seat, M12 x 1.5 thread, and a 26mm shaft length, making it ideal for a wide range of vehicles requiring this specification. The 17mm hex head ensures easy installation and removal with standard tools.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Type 3 (1962,1963,1964,1965)

Notes:

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB11 – Wheel Bolt M12x1.5 28mm Tapered

Description:

M12 x 1.5 thread, 28mm shaft length
17mm hex head with tapered seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel bolt features a tapered seat, M12 x 1.5 thread, and a 28mm shaft length, making it ideal for a wide range of vehicles requiring this specification. The 17mm hex head ensures easy installation and removal with standard tools.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB12R – Wheel Bolt, M12x1.5 30mm Radius

Description:

M12 x 1.5 thread, 30mm shaft length
17mm hex head with radius seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel bolt features a radius seat, M12 x 1.5 thread, and a 30mm shaft length, making it ideal for a wide range of vehicles requiring this specification. The 17mm hex head ensures easy installation and removal with standard tools.

Compatible Vehicles: - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989)

Additional Vehicle Info: Caddy,Corrado,Golf Mk1,Golf Mk2,Golf Mk3,Scirocco

AC601SB13 – Wheel Bolt M12x1.5 35mm Tapered

Description:

M12 x 1.5 thread, 35mm shaft length
17mm hex head with tapered seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel bolt features a tapered seat, M12 x 1.5 thread, and a 35mm shaft length, making it ideal for a wide range of vehicles requiring this specification. The 17mm hex head ensures easy installation and removal with standard tools.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB14 – Wheel Bolt M12x1.5 39mm Tapered

Description: M12x1.5 tapered 39mm long threaded wheel bolt.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB14A – Wheel Bolt M12x1.5 42mm Tapered

Description: Wheel bolt tapered M12X1.5 42mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels. SSP 5x130 Porsche pattern wheels also use Radius seat bolts.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB14R – Wheel Bolt M12x1.5 40mm Radiused

Description: Wheel bolt radius M12X1.5 40mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB15 – Wheel Bolt M12x1.5 45mm Tapered

Description: M12 tapered 45mm long threaded wheel bolt.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB15R – Wheel Bolt, M12x1.5 45mm Radius

Description: Wheel bolt, radius seat. M12x1.5x45mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Caddy,Corrado,Golf Mk1,Golf Mk2,Golf Mk3,Scirocco

AC601SB16 – Wheel Bolt M12x1.5 50mm Tapered

Description: M12x1.5, 50mm tapered wheel bolt.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, along with SSP 5x130 Porsche pattern wheels..
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB16R – Wheel Bolt M12x1.5 50mm Radiused

Description: Wheel bolt radius M12x1.5 50mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Type 3 (1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB32 – Wheel Bolt M14x1.5 24mm Tapered

Description:

M14x1.5 thread with 24mm length.
60-degree tapered seat for secure fitment.
Ideal for most aftermarket wheels.

Selecting the correct wheel bolt is crucial for ensuring the safety and performance of your vehicle. Our Tapered Wheel Bolt, featuring an M14x1.5 thread and a 24mm length, is designed with a 60-degree tapered seat to fit most aftermarket wheels securely. This precision fit helps prevent brake or wheel damage and ensures that your wheels stay securely in place.

Tapered: The seat on the wheel is machined with a 60-degree taper, commonly used with most aftermarket wheels.
Radius: The seat is curved, used by VW and Porsche on their standard wheels, as well as SSP 5x130 Porsche pattern wheels.
Sleeved with Flat Washer: Typically used on American wheels, with sleeve diameters of 11/16 inches, or 5/8 to 3/4 inch on Wolfrace wheels.
Sleeved with 30 Degree Washer: Found on some old-school wheels, with sleeve diameters of either 11/16 inch or 41/64 inch.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SB33R – Wheel Bolt M14x1.5 27mm Radiused

Description: M14 x 27mm long radius seat wheel bolt.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SB34 – Wheel Bolt M14x1.5 28mm Tapered

Description:

M14x1.5 size with a 28mm length, tapered seat style
10.9 grade for high strength and durability
Ideal for use with certain aftermarket wheels

This M14x1.5 wheel bolt features a 28mm length and a tapered seat, designed for use with some aftermarket wheels. Made from high-strength 10.9 grade material, it ensures reliable performance and durability under stress.

Perfect for replacing or upgrading wheel bolts on your vehicle, these bolts provide secure fastening and are a great choice for custom wheels and aftermarket setups.

Notes:

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SB34R – Wheel Bolt M14x1.5 28mm Radiused

Description:

M14x1.5 size with a 28mm length, radius seat style
10.9 grade for high strength and durability
Ideal for use with certain aftermarket wheels

This M14x1.5 wheel bolt features a 28mm length and a radius seat, designed for use with some aftermarket wheels. Made from high-strength 10.9 grade material, it ensures reliable performance and durability under stress.

Perfect for replacing or upgrading wheel bolts on your vehicle, these bolts provide secure fastening and are a great choice for custom wheels and aftermarket setups.

Notes:

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SB35R – Wheel Bolt M12x1.5 35mm Radiused

Description: Wheel bolt radius M12x1.5 35mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - Type 3 (1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SB54 – Wheel Bolt M14x1.5 33mm Tapered

Description: Wheel bolt tapered M14X1.5 33mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SB54R – Wheel Bolt M14x1.5 33mm Radiused

Description: Wheel bolt radius M14X1.5 35mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Transporter T4,T2 Bay,T2 Split,Type 3

AC601SB55R – Wheel Bolt M14x1.5 41mm Radiused

Description: Wheel bolt radius M14X1.5 41mm

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Transporter T4,T2 Bay,T2 Split,Type 3

AC601SB56 – Wheel Bolt M14x1.5 41mm Tapered

Description: Wheel bolt tapered M14X1.5 41mm with a 17mm socket head

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975) - Type 3 (1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T25,T2 Bay,T2 Split,Type 3

AC601SB56R – Wheel Bolt M14x1.5 45mm Radiused

Description:

M14 x 1.5 thread, 45mm shaft length
17mm hex head with radiused seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel bolt features a radiused seat, M14 x 1.5 thread, and a 55mm shaft length, making it ideal for a wide range of vehicles requiring this specification. The 17mm hex head ensures easy installation and removal with standard tools.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Corrado,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,T2 Bay,T2 Split,Type 3

AC601SBHR11 – Wheel Bolt M12x1,5 28mm Radiused

Description: Wheel bolt, tapered seat with a round head 12x1.5 28mm

These fixings feature a round head and require a special Allen key to turn them. They are designed for wheels with recessed bolt holes where normal bolts cannot be used for example our BRM 5x112 wheels.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SBHR14 – Wheel Bolt M14x1.5 28mm Tapered

Description: Wheel, Bolt, 14x1.5 28mm tapered

These fixings feature a round head and require a special Allen key to turn them. They are designed for wheels with recessed bolt holes where normal bolts cannot be used for example our BRM 5x112 wheels.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SN001A – Wheel Nut M14x1.5 10 Point Head Type

Description:

Multi-point socket with round outer profile
Designed for recessed bolt holes in custom wheels
Requires special Allen key for installation

This chrome plated steel wheel nut, also known as a “Tuner Nut,” is specifically designed for use with SSP 5/112 Cosmic and BRM wheels. Its round outer shape and multi-point internal socket make it ideal for wheels with deep, narrow bolt holes where standard nuts or bolts won’t fit.

These nuts require a special Allen key for tightening and removal, offering both a secure fit and a clean, flush appearance. Selecting the correct wheel nut is critical—using the wrong type can lead to brake or wheel damage, or even wheel detachment. If you're unsure which fixings are right for your setup, please get in touch for expert advice

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

AC601SN001B – Multi Point Wheel Nut M14x1.5 Tapered

Description: Tapered seat M14x1.5 multi point wheel nut. Multi Point socket , round on the outside for use with SSP 5/112 Cosmic and BRM wheels. Also called a ''Tuner nut''

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.
Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay

AC601SN002A – Wheel Nut M12x1.5 10 Point Head Type

Description: Wheel nut, hex socket , round on the outside for use with SSP 5x205 Cosmic wheels.
Also called a ''Tuner nut'' these fixings feature a round head and require a special Allen key to turn them. They are designed for wheels with recessed bolt holes where normal bolts cannot be used

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

AC601SN002B – Wheel Nut M12x1.5 8 Point Head Type

Description: Wheel nut, M12x1.5 hex socket 8 point, round on the outside for use with SSP 5x205 Cosmic wheels.
Also called a ''Tuner nut'' these fixings feature a round head and require a special Allen key to turn them. They are designed for wheels with recessed bolt holes where normal bolts cannot be used

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle

AC601SN14B – Wheel Nut M12x1.5 Tapered

Description:

M12 x 1.5 thread
Hex head with tapered seat design
Secure fitment helps prevent wheel/brake damage

This high-quality wheel nut features a tapered seat, M12 x 1.5 thread, making it ideal for a wide range of vehicles requiring this specification. The hex head ensures easy installation and removal with standard tools.

Choosing the correct wheel nut is critical for vehicle safety. Using the wrong type can lead to brake interference, wheel damage, or even wheels detaching while driving. This bolt provides the secure, proper fitment you need for peace of mind on the road.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601SN14BR – Wheel Nut M12x1.5 Radiused

Description: Wheel nut radiused M12x1.5 closed

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601SN16B – Wheel Nut 1/2'' UNF Tapered

Description: Wheel nut tapered 1/2 inch UNF thread.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

AC601SN17B – Wheel Nut M14x1.5 Tapered 19mm Hex

Description:

M14x1.5 thread with 35mm length.
60-degree tapered seat for secure fitment.
Ideal for most aftermarket wheels.

Selecting the correct wheel nut is essential for maintaining the safety and performance of your vehicle. Our Tapered Wheel Nut, with an M14x1.5 thread and a 35mm length, features a 60-degree tapered seat designed to fit most aftermarket wheels. This ensures a secure and proper fit, preventing potential damage to your brakes or wheels.

Tapered: The seat on the wheel is machined with a 60-degree taper, which is used with most aftermarket wheels.

Radius: The seating of the wheel is curved, used by VW and Porsche on their standard wheels and SSP 5x130 Porsche pattern wheels.

Sleeved with Flat Washer: Typically used on American wheels, with sleeve diameters of 11/16 inches, or 5/8 to 3/4 inch on Wolfrace wheels.

Sleeved with 30 Degree Washer: Found on some old-school wheels, with sleeve diameters of either 11/16 inch or 41/64 inch.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,Type 3

AC601SN17BA – Wheel Nut M14x1.5 Tapered, Black

Description:

M14x1.5 thread with tapered seat
Closed-end design for universal fit where required
Steel nut with a satin black finish

This closed-end wheel nut features an M14x1.5 thread and a tapered seat, making it a versatile fit for a wide range of vehicles where this specification is required. The closed-end design offers a clean, finished look while protecting the threads from dirt and corrosion.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Approx 32mm in Length

Additional Vehicle Info: Beetle,Beetle Cabriolet,Corrado,Golf Mk1,Golf Mk2,Golf Mk3,Karmann Ghia,Scirocco,T2 Bay,T2 Split,Type 3

AC601SN17BR – Wheel Nut M14x1.5 35mm Radiused

Description:

M14x1.5 thread with R14 radius seat.

Closed-end design for protection.

Ideal for VW, Porsche, and SSP 5x130 Porsche pattern wheels.

Choosing the right wheel nut is essential to ensure the safety and performance of your vehicle. Our Wheel Nut with a radius seat, M14x1.5 thread, and R14 radius, features a closed-end design to protect the threads from dirt and corrosion. This radius seat nut is specifically designed for use with VW and Porsche standard wheels, as well as SSP 5x130 Porsche pattern wheels, ensuring a secure and proper fit.

Tapered: The seat is machined with a 60-degree taper, commonly used with most aftermarket wheels.

Radius: The seat is curved, used by VW and Porsche on standard wheels and SSP 5x130 Porsche pattern wheels.

Sleeved with Flat Washer: Typically used on American wheels with sleeve diameters of 11/16 inches, or 5/8 to 3/4 inch on Wolfrace wheels.

Sleeved with 30 Degree Washer: Found on some old-school wheels, with sleeve diameters of either 11/16 inch or 41/64 inch.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

AC601SN17BR1 – Wheel Nut M14x1.5 35mm Radiused

Description:

Durable chrome-plated steel construction.
M14x1.5 thread with a small radius seat.
Closed-end design for a sleek finish.

Selecting the correct wheel nut is crucial for ensuring the safety and integrity of your wheels. Our Chrome Plated Steel Wheel Nut, M14x1.5 small radius, closed end, is designed to provide a secure and reliable fit for your vehicle's wheels. The durable chrome-plated finish offers both corrosion resistance and a stylish appearance.

When choosing wheel nuts, it is essential to match the type to your wheels to prevent brake or wheel damage and avoid the risk of wheels falling off. Our small radius seat is specifically designed to fit certain wheel types. For most aftermarket wheels, a tapered seat with a 60-degree taper is used.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T25,T2 Bay,T2 Split

AC601SN17BR2 – Wheel Nut M14x1.5 35mm Radiused

Description: Zinc-plated steel wheel nut, M14x1.5, R14 seat, open end

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,Type 3

AC601SN17BRA – Wheel Nut M14x1.5 Radiused Black Alloy

Description: Aluminium wheel nut finished in black. M14x1.5, R14 radius, closed nut

Made from aluminium these wheel nuts are lighter to help reduce unsprung weight.

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,Type 3

AC601SN35 – Wheel Nut M14x1.5 for 3/4'' Sleeved Hole

Description: Chrome plated M14x1.5 wheel nut with a closed top and a flat aluminium washer, designed to locate in a 3/4" hole in the wheel. For use on Wolfrace wheels. Each

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels

Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels, as well as the SSP 5x130 wheels.

Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels

Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SN41R – Wheel Nut M12x1.5 Radiused

Description: Wheel nut radius M12X1.5 open end

Selecting the correct wheel nut and bolt for your wheels is very important. An incorrect choice could result in brake or wheel damage and your wheels falling off. Below is a guide to the main types. If you need any advice please contact us.

Tapered – The seat on the wheel is machined with a taper of 60 degrees. This type is used with most aftermarket wheels
Radius – The seating of the wheel is curved. This is used by VW and Porsche on their standard wheels as well as the SSP 5x130 Porsche pattern wheels.
Sleeved with a flat washer – The sleeve diameter is usually 11/16 inches on American wheels and 5/8 or ¾ inch on Wolfrace wheels
Sleeved with 30 degree washer – Used on some old school wheels the sleeve is either 11/16 inch or 41/64 inch in diameter.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601SP105 – Wheel Spacer 9.5mm Thick 4x130 Aluminium Each

Description: Wheel Spacer 4x130 PCD, 3/8'' (9.5mm) Thick. For all vehicles with 4x130 Stud Pattern. Billet aluminium. Sold individually.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1968,1969,1970,1971,1972,1973,1974) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,Type 3

AC601SP20 – SSP Wheel Spacers 3mm 5x112 Flat

Description:

A pair of 3mm thick flat wheel spacers in 5x112 PCD. Longer wheel bolts required.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

AC601SP30 – SSP Wheel Spacers 3mm 5x130 Flat

Description:

A pair of 3mm thick flat wheel spacers in 5x130 PCD. Longer wheel studs/bolts required.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SP31 – SSP Wheel Spacers 5mm 5x112 Flat

Description:

A pair of 5mm thick flat wheel spacers in 5x112 PCD. Longer wheel bolts required.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

AC601SP33 – Wheel Spacers 15mm 5x112 Hubcentric

Description: A pair of 15mm thick hubcentric wheel spacers in 5x112 PCD. Longer wheel bolts required.

Hubcentric spacers to suit 66mm centre bore wheels as per standard VW T2/T25 fitment.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,T25,T2 Bay

AC601SP34 – Wheel Spacers 20mm 5x112 Bolt-on Hubcentric

Description: A pair of 20mm thick bolt-on hubcentric wheel spacers in 5x112 PCD.

These spacers bolt to the hub and then the wheel bolts to the spacer. The bolts for bolting the spacer to the hub are provided.

Hubcentric spacers to suit 66mm centre bore wheels as per standard VW T2/T25 fitment.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

AC601SP35 – Wheel Spacers 25mm 5x112 Bolt-on Hubcentric

Description: A pair of 25mm thick bolt-on hubcentric wheel spacers in 5x112 PCD.

These spacers bolt to the hub and then the wheel bolts to the spacer. The bolts for bolting the spacer to the hub are provided. Hubcentric spacers to suit 66mm centre bore wheels as per standard VW T2/T25 fitment.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T25,T2 Bay

AC601SP36 – SSP Wheel Spacers 5mm 4x130 Flat

Description:

A pair of 5mm thick flat wheel spacers in 4x130 PCD. Longer wheel bolts required.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601SP37 – SSP Wheel Spacers 10mm 4x130 Flat

Description:

A pair of 10mm thick flat wheel spacers in 4x130 PCD. Longer wheel bolts required.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601SP38 – Wheel Spacers 15mm 4x130 Hubcentric

Description:

A pair of 15mm thick hubcentric wheel spacers in 4x130 PCD. Longer wheel bolts required.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601SP39 – Wheel Spacers 20mm 4x130 Bolt-on Hubcentric

Description: A pair of 20mm thick bolt-on hubcentric wheel spacers in 4x130 PCD.

These spacers bolt to the hub and then the wheel bolts to the spacer. The bolts for bolting the spacer to the hub are provided.

Hubcentric spacers to suit 78.6mm centre bore wheels, including stock VW steel wheels and SSP 4x130 Alloy wheels.

These top quality wheel spacers are made for SSP in the UK. They are not TÜV approved.

Compatible Vehicles: - Beetle (1947,1967,1968,1969,1970,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601SP40 – Wheel Spacers 25mm 4x130 Bolt-on Hubcentric

Description:

25mm thick for perfect wheel spacing.
Includes bolts for easy installation.
Hubcentric design for 78.6mm centre bore wheels.

Enhance the stance and handling of your vehicle with this pair of 25mm thick bolt-on hubcentric wheel spacers, designed for 4x130 PCD wheels. These spacers bolt directly to the hub, and the wheel then bolts to the spacer, ensuring a secure and straightforward installation process. Bolts for attaching the spacers to the hub are included.

Engineered to suit 78.6mm centre bore wheels, these hubcentric spacers are compatible with stock VW steel wheels and SSP 4x130 alloy wheels. Manufactured to top quality standards for SSP in the UK, these spacers offer durability and precision. Please note, they are not TÜV approved, but provide a reliable solution for achieving the desired wheel fitment and performance.

Compatible Vehicles: - Beetle (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1967,1968,1969,1970,1971,1972,1973,1974) - Type 3 (1967,1968,1969,1970,1971,1972,1973)

Notes:

The bolts for bolting the spacer to the hub are provided

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC601SS12 – Wheel Stud M12x50mm Screw In

Description: Screw-in M12x1.5 stud, 50mm overall length.

Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.

It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SS13 – Wheel Stud M12x60mm Screw In

Description: Screw-in M12x1.5 stud, 60mm overall length for aftermarket wheels and/or spacers.

Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.

It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Golf Mk2,Karmann Ghia,Scirocco,Type 3

AC601SS26 – Wheel Stud M14x1.5 1 1/8" (28.5mm) & 3/8" (9.5mm)

Description: M14x1.4 Screw in wheel stud with 28.5mm/9.5mm split; 38mm overall length.

Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.

It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.

Notes:Wind in to the disc/drum by hand or use a 7/32" Allen key.

Additional Vehicle Info: Beetle,T2 Bay,T2 Split

AC601SS27 – Wheel Stud M14x1.5 40mm Screw In

Description:

Converts hubs from bolt to stud & nut setup
Ideal for alloy wheels and/or spacers
M14x1.5 thread, 40mm total length

This M14x1.5 screw-in wheel stud is designed to convert standard wheel bolt hubs to a stud and nut configuration. With a 40mm overall length, it's perfect for use with aftermarket or steel wheels, and ideal when running spacers.

Installing studs makes wheel changes easier and more secure, offering better alignment and consistent use of nuts across all four wheels. Always measure to ensure proper fitment—after installation, at least 14mm of thread must remain for the nut to fully engage with the wheel and/or spacer in place.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SS28 – Wheel Stud M14x1.5 50mm Screw In

Description:

M14x1.5 thread, 50mm overall length
Converts bolt hubs to stud & nut setup
Ideal for alloy wheels and/or spacers

This screw-in wheel stud is designed to convert hubs originally fitted with wheel bolts into a stud and nut configuration. With an M14x1.5 thread and a total length of 50mm, it’s perfect for use with aftermarket alloy wheels and spacers, offering easier wheel alignment and consistent nut use across all hubs.

Made for convenience and performance, this stud simplifies wheel installation and enhances compatibility. It’s crucial to measure carefully—once installed, at least 14mm of thread must remain available for the nut after the wheel and spacer are fitted. Sold individually.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SS29 – Wheel Stud M14x1.5 60mm Screw In

Description:

Converts hubs from bolt to stud & nut setup
Ideal for alloy wheels and/or spacers
M14x1.5 thread, 60mm total length

This M14x1.5 screw-in wheel stud is designed to convert standard wheel bolt hubs to a stud and nut configuration. With a 60mm overall length, it's perfect for use with aftermarket or steel wheels, and ideal when running spacers.

Compatible Vehicles: - T2 Bay (1968,1969,1970) - Beetle (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: Beetle,T25,T2 Bay,T2 Split

AC601SS29A – Wheel Stud M14x1.5 80mm Screw In

Description: Screw-in M14x1.5 stud, 80mm overall length for aftermarket wheels and spacers.

Designed to screw into hubs that originally would have used wheel bolts in order to convert to a stud & nut setup. This makes it easier to locate your wheels on the hub, and allows a consistent choice of nuts to be used front and back. Perfect for use with alloy wheels and/or spacers.

It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.

Additional Vehicle Info: Beetle,T25,T2 Bay,T2 Split

AC601SS43 – Wheel Stud M14x1.5 60mm Press In

Description:

60mm length for extended applications.
Ideal for aftermarket wheels and spacers.
Ensures safe and secure fitment.

Our Press-In M14x1.5 Stud, with a 60mm overall length, is the perfect solution for fitting aftermarket alloy wheels and spacers. Specifically designed to be pressed into hubs with factory-installed studs, these studs extend the reach where original studs fall short, providing the necessary length for a secure fit.

It is crucial to measure and verify the required stud length for your specific setup. Once these studs are installed into the hub, ensure that at least 14mm of thread engages with the nut when the wheel and/or spacer is installed. This guarantees a safe and reliable connection, giving you peace of mind while enhancing your vehicle's performance and appearance.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

AC601SS45 – Wheel Stud M14x1.5 45mm Press In

Description:

53mm total length, 15mm splined section
Ideal for fitting aftermarket wheels/spacers
Ensures safe installation with 14mm of thread engagement

The Press-In Wheel Stud is a high-quality, essential component for safely fitting aftermarket alloy wheels or spacers when the original studs are too short. Supplied individually, each stud measures 53mm in total length, featuring a 15mm splined section, 30mm of threaded portion, and an 8mm blank outer end. This precise design ensures a secure fit when pressed into hubs that already have factory-installed studs.

It’s crucial to measure the stud length carefully for your specific application. After installation, make sure there’s at least 14mm of thread engagement to ensure proper fitting of the wheel and/or spacer, providing the necessary strength and safety for your vehicle’s wheels.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:

The total length of the stud is 53mm.

The splined section is 15mm

30mm of thread and 8mm blank at the outer end.

Additional Vehicle Info: T25,T2 Bay

AC601SS50 – Wheel Stud M12/14x1.5 50mm Screw for CSP Disc Kit

Description:

Screws M12x1.5 into disc, M14x1.5 for wheel nuts
Standard size for many CSP disc brake kits
Ideal for M12 to M14 stud conversions

This stud is designed for use with many CSP disc brake kits, featuring an M12x1.5 thread on one end to screw into the disc and an M14x1.5 thread on the other to accept standard wheel nuts. It’s the same length and diameter as those supplied with most CSP kits.

Also great for converting hubs originally using M12 wheel bolts to a stud-and-nut setup with M14 studs. Always ensure proper fitment—at least 14mm of thread should remain available for the nut after installation with your wheel and/or spacer.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601SS51 – Wheel Stud M12/14x1.5 60mm Screw for CSP Disc Kit

Description: Screw in M12 disc to M14 wheel conversion wheel stud for CSP disc brake kit. M12x1.5 end screws into the CSP disc, and M14x1.5 end is for the wheels. 60mm overall length for use with aftermarket wheels or small spacers.

It is important to measure and check the length of studs you'll need. Once screwed into the hub there needs to be at least 14mm of thread to go into the nut with the wheel and/or spacer installed.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

AC601T001A – Wheel Nut Tool, 10 Point, 17mm Head

Description: Tool for tightening/loosening Wheel Nuts when using SSP BRM 5x112 wheels and Cosmic 5x205 Wheels, 10 point 'tuner' wheel nuts. 17mm socket head

Suits the wheel bolt AC601SB05T, or the wheel nuts AC601SN002A & AC601SN001A

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991)

Additional Vehicle Info: T25,T2 Bay

AC601T001B – Wheel Nut Tool, 10 Point, 19mm Head

Description: Tool for Wheel nut when using BRM 5x205 wheels and Cosmic 5x205 Wheels. Multi Point Type to suit 10 point wheel nuts. 19mm socket head.

AC609001 – Aluminium Drum Cover Set of 4

Description:

Spun aluminum covers designed to mimic Porsche brake drums
Perfect for 550 or 356 Speedster replica builds
Fits most 5 x 205 PCD VW brake drums with 10" diameter
Compatible with A.C. Industries wide-5 disc brake kits

This set of 4 spun aluminum drum covers is the perfect finishing touch for your 550 or 356 Speedster replica, providing a classic Porsche brake drum look without the cost. Designed to give your build the authentic appearance of an early Porsche race car, these drum covers are ideal when paired with chrome or painted Porsche-style wheels, especially those without hub caps.

The covers fit most 5 x 205 PCD VW brake drums with a 10" diameter and are also compatible with A.C. Industries wide-5 disc brake kits, making them a versatile addition to a wide range of classic car builds. With these drum covers, you can achieve the iconic Porsche look, adding that extra detail to your project for a truly distinctive and vintage appearance.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Type 3

AC6096096 – Handbrake Cable for Rear Disc Kit

Description:

Handbrake cable for EMPI Rear Disc Kit. For kits listed up to 1967 and also 1973 onwards.

68 Inches overall length

Compatible Vehicles: - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1960,1961,1962,1963,1964,1965,1966,1967,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia

AC6096099 – Handbrake Cable for Rear Disc Kit

Description:

Handbrake cable for EMPI rear disc kit.

72 inches in overall length.

Compatible Vehicles: - Beetle (1968,1969,1970,1971,1972) - Beetle Cabrio (1968,1969,1970,1971,1972) - Karmann Ghia (1968,1969,1970,1971,1972)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia