Fitment #2

021-101-064/X – Cylinder Head 1700cc 39.3x33mm Valves with EGR Hole Complete

Description:

Features 39.3mm inlet valves and 33mm exhaust valves
Improved sealing surface, no sealing rings required
Includes rocker, inlet, and exhaust studs for easy installation

This complete cylinder head is designed for 1700cc Type 4 engines, featuring stepped/oval exhaust ports and EGR holes. The upgraded sealing surface eliminates the need for the original sealing rings, offering enhanced durability and a more reliable fit.

Fully equipped with rocker, inlet, and exhaust studs, this cylinder head provides a ready-to-install solution for your engine rebuild or upgrade. With its improved design, it ensures better performance and long-lasting reliability for your Type 4 engine.

Compatible Vehicles: - T2 Bay (1972,1973)

Notes:If EGR is not needed then plug the holes using AC101033

Additional Vehicle Info: T2 Bay

021-101-107 – Vibration Damper on Main Case Studs 1700-2000cc

Description:

Vibration damper on main case studs, between case halves, on 1.7-2.0 Type 4 engines. 6 required per engine.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-118/B – Core Plug, Aluminium 13.2mm x 6.5mm

Description:

Crankcase oil gallery core plug in aluminium. For Waterboxer

Compatible Vehicles: - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

13.2 x 6.5mm

1.6l CT, CZ engine

1.9l DF, DG, DH, EY, GW

2.0l CU, CZ

Additional Vehicle Info: T25

021-101-118/E – Core Plug Aluminium 10.2mm x 7.5mm

Description:

Core plug for oil gallery, Aluminium 10.2 x 7.5

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - T2 Split Bus (1960,1961,1962,1963,1964,1965,1966,1967)

Additional Vehicle Info: Beetle,T2 Bay,T2 Split

021-101-120 – Core Plug Aluminium 15.7mm x 10mm

Description:

Core plug for oil gallery, Aluminium 15.7 x 10

Additional Vehicle Info: Beetle,T2 Bay,T2 Split

021-101-131/E – Nut for Type 4 Case Set of 6

Description:

Nut. For crankcase through-bolt. For 1700-2000cc Type 4 engines.

Set of 6

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-269/A – O-Ring for Sump Plate, 1700cc-2000cc

Description:

High-quality O-ring seal for rear sump plate
Compatible with 1.7-2.0 Type 4 engines
Ensures a secure, leak-free fit

This O-ring seal is designed for the rear sump plate near the oil filler, secured with two bolts. It provides a reliable seal, preventing leaks and maintaining optimal engine performance. Ideal for 1.7-2.0 Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-341/A – Cylinder Base gasket, Type4, all

Description:

Cylinder Base gasket Type4 all 100x109mm. 0.14mm thick.

This is a new production part made on tooling approved by VW however it is technically not a genuine VW part and therefore will not feature VW logos.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-101-343/A – Cylinder to Head Gasket Type 4 1800cc

Description:

Cylinder to head gasket ring for 1.8 Type 4 engine.

Compatible Vehicles: - T2 Bay (1974,1975) - 914 (1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-101-397 – Rocker Shaft Stud Type 4 1700-2000cc

Description:

Rocker shaft stud for 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-403/A – Valve Guide Inlet 1700-2000cc

Description:

Standard inlet valve guide for Type 4 engines.

To fit:
T2 Baywindow - 1700cc, 1800cc and 2000cc air cooled engines
T25 - 2000cc air cooled engines
914 - 1700cc, 1800cc
914 - 2000cc up to engine number GB0 010050

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983) - Vanagon (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-417/A – Valve Guide Exhaust 9mm

Description:

Precision fit for reliable performance.
Compatible with multiple engine types.
Durable construction for longevity.

The Standard Exhaust Valve Guide is designed for precise compatibility with T2/T25 Type 4 1700-2000cc air-cooled engines, T25 Type 4 Waterboxer engines, certain Type 1 1600 engines with 9mm stem exhaust valves, and 914 Type 4 1700-1800cc engines (excluding 2000cc). This durable valve guide ensures a reliable fit and performance, essential for maintaining your engine's efficiency and longevity.

Please note that due to sourcing challenges, some guides may be supplied without the top shoulder. This design change does not impact functionality, as the guide's interference fit within the bore secures its position effectively.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-457 – Cylinder Head Nut, M10

Description:

High-quality M10 nut for secure head fastening
Suitable for 1700cc, 1800cc, and 2000cc Type 4 engines
Fits VW T2 Bay (’71–’79) & T25 (’79–’83) models

This good quality M10 nut is designed specifically for securing cylinder heads on Type 4 engines. Sold individually, it’s ideal for replacements or full rebuilds where precision and durability are essential.

Compatible with 1700cc, 1800cc, and 2000cc engines found in VW T2 Bays (1971–1979) and VW T25s (1979–1983), this nut ensures a reliable fit and long-lasting performance under high engine stress. A must-have for any serious air-cooled engine rebuild.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-467/A – Oil Sump Plate, with option for a Oil Temp Sender

Description:

Threaded hole allows fitment of oil temp sender
Fits 1.7–2.0L VW Busses from 1971 to 1983
Most accurate sump-based oil temp reading

This oil sump inspection plate is a smart upgrade for your classic Volkswagen Bus, offering the added benefit of a threaded port for an oil temperature sender. Designed to fit 1.7 to 2.0 litre engines from 1971 to 1983, it allows for precise monitoring of oil temperature directly from the sump—where readings are most accurate.

Ideal for restorations or performance builds, this plate helps you keep a closer eye on engine health. For best results, be sure to order a new O-ring seal (part number 021-101-269/A) when installing the new plate to ensure a leak-free fit.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-471/R – SSP Rocker Cover 1700-2000cc

Description:

Exclusive SSP design with gloss black finish.
Top-quality powder coating for durability.
Fits 1700/2000 Type 4 engines.

This rocker cover, made exclusively by SSP, is designed for 1700/2000 Type 4 engines and finished in a high-quality gloss black powder coating. The premium finish not only enhances the look of your engine bay but also provides excellent protection against corrosion and wear.

Crafted with precision, this rocker cover ensures a perfect fit and long-lasting performance. It's an ideal choice for those looking to upgrade or replace their existing rocker cover with a stylish and durable option that meets the highest standards.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:021-101-481 gasket required when fitting. Suitable for all 1700-2000cc Type 4 air cooled engines. Vehicle fitments: - Baywindow 72-79 - T25 80-83 - 914 70-76

Additional Vehicle Info: 914,T25,T2 Bay

021-101-481 – Rocker Cover Gasket, 1700-2000cc Type 4 Engines

Description:

Durable rocker cover gasket for Type 4 engines
Fits 1700-2000 engine models for reliable sealing
Easy installation and long-lasting performance

Ensure a tight, reliable seal with this rocker cover gasket, designed specifically for 1700-2000 Type 4 engines. Engineered to withstand high pressure and temperature, it offers long-lasting durability, preventing oil leaks and ensuring optimal engine performance.

This gasket provides an easy installation, making it a perfect replacement part for maintaining your engine's integrity. Built to meet OEM standards, it guarantees a precise fit for smooth engine operation and reduced maintenance needs.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-101-487 – Rocker Cover Clip 1700-2000cc

Description:

Designed for 1700-2000 Type 4 engines.
Secures rocker cover in place.
Durable and reliable fit.

This rocker cover clip is specifically designed for 1700-2000 Type 4 engines, ensuring a secure and reliable hold on your rocker cover. Engineered for durability, it helps maintain a tight seal, preventing oil leaks and protecting your engine.

An essential component for maintaining your engine's performance, this clip offers an easy and effective solution for keeping your rocker cover firmly in place.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 air cooled engines. Baywindow 72-79 T25 80-83 914-4 70-76

Additional Vehicle Info: 914,T25,T2 Bay

021-103-483/B – Rocker Cover Gasket VR6

Description:

Rocker cover gasket for VR6

Compatible Vehicles: - Corrado (1991,1992,1993,1994) - Golf Mk3 (1992,1993,1994)

Notes:Mk3 Golf AAA engine code up to engine number >>146 001 Corrado ABV engine code up to engine number >>014 000

Additional Vehicle Info: Corrado,Golf Mk3

021-103-483/D – Rocker Cover Gasket VR6

Description:

Rocker cover gasket for 2.8 and 2.9 VR6 engines.

Compatible Vehicles: - Corrado (1994,1995) - Golf Mk3 (1994,1995,1996,1997,1998)

Notes:Mk3 Golf AAA engine from engine number 146 001>> Corrado ABV engine from engine number 014 001>>

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-103-493/A – Ventilation Hose for VR6 Engine

Description:

Ventilation Hose for VR6 Engine

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994)

Notes:Corrado ABV engine up to chassis number >>50-R-002 000 Mk3 Golf AAA engine up to chassis number>>1H-RB120 000

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-103-601/B – Engine Oil sump for VR6

Description:

Engine oil sump pan for VR6

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-103-609 – VR6 Sump Gasket

Description: Engine oil sump gasket for VR6

Compatible Vehicles: - Corrado (1993,1994,1995) - Golf Mk3 (1992,1993,1994) - T4 (1996,1997)

Notes:Mk3 Golf 92-94 from chassis 1H-PW400 001>> Corrado 93-95 up to chassis >>50-P-009 001

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-103-609/B – Engine Oil Sump Gasket VR6

Description:

Engine oil sump gasket for VR6

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997)

Notes:T4 with AES engine code up to engine number >>009 144 Mk3 Golf 92-94 up to chassis >>1H-PW400 001 Corrado 93-95 from chassis 50-P-009 001>>

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-105-209/A – Crankshaft Timing Gear 1700-2000cc

Description:

Timing gear on the crankshaft that provides the drive for the camshaft. For 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-105-231 – Distributor Drive Shaft 1700-2000cc

Description:

Distributor drive shaft for all 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-105-231/USED – Distributor Drive shaft, 1.7-2.0 engine, USED

Description: Distributor drive shaft for all Type 4 engines. Used.
To fitT2 Baywindow 73-79 Type 4 1.7,1.8 & 2.0 Ltr engines onlyT25 80-83 Type 4 2.0 Ltr Air Cooled engine only

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-105-247/A – Crankshaft Pulley Oil Seal 1700-2000cc

Description:

Crankshaft pulley oil seal for 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-105-247/A/GEN – Crankshaft Pulley Oil Seal, Type 4 1700-2000cc

Description:

High-quality crankshaft pulley oil seal for Type 4 engines
Fits 1700-2000cc models for a secure, leak-free seal
Durable material ensures long-lasting performance

This crankshaft pulley oil seal is designed for 1700-2000cc Type 4 engines, providing a tight, reliable fit to prevent oil leaks. Built from durable materials, it helps maintain engine efficiency and extends the lifespan of crucial components.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-105-275 – Flywheel Bolt Washer 1700-2000cc

Description:

Flywheel bolt washer for 1700-2000cc Type 4 engines. Each.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 912,914,T25,T2 Bay

021-105-279 – Flywheel O-ring 1700-2000cc or Waterboxer

Description:

O-ring for flywheel for 1700-2000cc Type 4 engines and 1.9/2.1 Waterboxer engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 914,T25,T2 Bay

021-105-281 – End Float Shim 0.30mm 1700-2000cc & 1.9-2.1 WBX

Description:

End float shim 0.30mm
Required to achieve the correct end float
Precision-engineered from stainless steel for durability

This 0.30mm End Float Shim is manufactured from high-quality stainless steel to tight tolerances, ensuring accurate and consistent thickness for precise adjustments. The thickness is etched directly onto the shim, making it easy to identify and install. Designed specifically for use in 1700-2000cc Type-4 engines and 1.9-2.1 Waterboxer engines, this shim is essential for setting the correct crankshaft end float.

Three shims are required to achieve the correct end float, and we offer a range of thicknesses, including 0.24mm, 0.30mm, 0.32mm, 0.34mm, and 0.38mm, allowing for optimal customisation and tolerance settings. Whether you're restoring or maintaining your engine, this precision shim provides the reliability you need for smooth performance.

Additional Vehicle Info: 914,T25,T2 Bay

021-105-283 – End Float Shim 0.32mm 1700-2000cc & 1.9-2.1 WBX

Description:

End float shim 0.32mm
Required to achieve the correct end float
Precision-engineered from stainless steel for durability

This 0.32mm End Float Shim is manufactured from high-quality stainless steel to tight tolerances, ensuring accurate and consistent thickness for precise adjustments. The thickness is etched directly onto the shim, making it easy to identify and install. Designed specifically for use in 1700-2000cc Type-4 engines and 1.9-2.1 Waterboxer engines, this shim is essential for setting the correct crankshaft end float.

Additional Vehicle Info: 914,T25,T2 Bay

021-105-285 – End Float Shim 0.34mm 1700-2000cc & 1.9-2.1 WBX

Description:

End float shim 0.34mm
Required to achieve the correct end float
Precision-engineered from stainless steel for durability

This 0.34mm End Float Shim is manufactured from high-quality stainless steel to tight tolerances, ensuring accurate and consistent thickness for precise adjustments. The thickness is etched directly onto the shim, making it easy to identify and install. Designed specifically for use in 1700-2000cc Type-4 engines and 1.9-2.1 Waterboxer engines, this shim is essential for setting the correct crankshaft end float.

Additional Vehicle Info: 914,T25,T2 Bay

021-105-287 – End Float Shim 0.36mm 1700-2000cc & 1.9-2.1 WBX

Description:

End float shim 0.36mm
Required to achieve the correct end float
Precision-engineered from stainless steel for durability

This 0.36mm End Float Shim is manufactured from high-quality stainless steel to tight tolerances, ensuring accurate and consistent thickness for precise adjustments. The thickness is etched directly onto the shim, making it easy to identify and install. Designed specifically for use in 1700-2000cc Type-4 engines and 1.9-2.1 Waterboxer engines, this shim is essential for setting the correct crankshaft end float.

Additional Vehicle Info: 914,T25,T2 Bay

021-105-289 – End Float Shim 0.38mm 1700-2000cc & 1.9-2.1 WBX

Description:

End float shim 0.38mm
Required to achieve the correct end float
Precision-engineered from stainless steel for durability

This 0.38mm End Float Shim is manufactured from high-quality stainless steel to tight tolerances, ensuring accurate and consistent thickness for precise adjustments. The thickness is etched directly onto the shim, making it easy to identify and install. Designed specifically for use in 1700-2000cc Type-4 engines and 1.9-2.1 Waterboxer engines, this shim is essential for setting the correct crankshaft end float.

Additional Vehicle Info: 914,T25,T2 Bay

021-105-291 – End Float Shim 0.24mm 1700-2000cc & 1.9-2.1 WBX

Description:

End float shim 0.24mm
Required to achieve the correct end float
Precision-engineered from stainless steel for durability

This 0.24mm End Float Shim is manufactured from high-quality stainless steel to tight tolerances, ensuring accurate and consistent thickness for precise adjustments. The thickness is etched directly onto the shim, making it easy to identify and install. Designed specifically for use in 1700-2000cc Type-4 engines and 1.9-2.1 Waterboxer engines, this shim is essential for setting the correct crankshaft end float.

Three shims are required to achieve the correct end float, and we offer a range of thicknesses, including 0.24mm, 0.30mm, 0.32mm, 0.34mm, and 0.38mm, allowing for optimal customization and tolerance settings. Whether you're restoring or maintaining your engine, this precision shim provides the reliability you need for smooth performance.

Additional Vehicle Info: 914,T25,T2 Bay

021-105-311 – Flywheel Felt Seal

Description:

Flywheel felt seal ring.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-105-431/A – Small End Bush 1700-2000cc

Description:

Small end bush for all 1700-2000cc Type 4 air cooled engines.
Supplied in singles.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:Press in, drill oil holes & ream to spec after installation

Additional Vehicle Info: 914,T25,T2 Bay

021-105-701/A – Big End Bearing Set, Standard, 1700-1800cc

Description:

Precision-fit bearings for Type 4 engines, 1700-1800cc capacity.
High durability for enhanced engine performance and longevity.
Compatible with standard size big end applications.

This standard size big end bearing set is designed specifically for 1700-1800cc Type 4 engines, ensuring optimal performance and reliability. Crafted to precise standards, these bearings provide a perfect fit, allowing for smooth and efficient engine operation. They are engineered to withstand the demands of high-performance engines, reducing wear and prolonging the lifespan of your engine components.

Ideal for engine rebuilds or replacements, this bearing set offers a dependable solution for maintaining the health of your Type 4 engine. Whether you're restoring a classic vehicle or enhancing your current engine's performance, these bearings deliver consistent, high-quality results.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-105-707/A – Big End Bearing Set 1700-1800cc, 0.25mm Oversize

Description:

Engine big end bearing set for 1700-1800cc Type 4 engines. 0.25mm oversize.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-109-021/CB – Mechanical Camshaft 1700-2000cc Standard

Description:

Ideal for 1700-2000cc Type 4 engines
268° duration and .378" lift with 1.3:1 rocker arms
Supplied without the camwheel for flexible configuration

This standard camshaft is designed for use with manual cam followers and is perfectly suited for 1700-2000cc Type 4 engines. Offering 268° of duration and a .378" lift when paired with 1.3:1 rocker arms, it delivers reliable, consistent valve timing and performance, ideal for stock or mild performance builds.

Please note that the camshaft is not supplied with a camwheel, allowing you to choose the appropriate gear for your setup. With a precision design that promotes smooth operation, this camshaft is an excellent choice for those looking to maintain or enhance their Type 4 engine’s performance while keeping it dependable.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:AC1092017 cam wheel required when fitting.

Additional Vehicle Info: 914,T2 Bay

021-109-301/A – Pushrod 1700-2000cc Manual Adjustment

Description:

Pushrod for 1.7-2.0 Type4 engine with Solid tappets.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

021-109-309/G – Camshaft Follower, Manual, 1700-2000cc Type 4 Engines

Description:

Precision fit for 1700-2000cc Type 4 engines
Durable construction for high-performance demands
Effortless upgrades for enhanced engine performance

Elevate the performance of your 1700-2000cc Type 4 engine with our Manual Cam Follower. Engineered for precision, this component ensures optimal camshaft function, enhancing your vehicle’s overall performance and efficiency. Its durable construction allows it to endure the rigours of high-performance driving, making it a reliable choice for enthusiasts and professionals alike.

This manual cam follower r is an essential component for those seeking to optimise their Type 4 engines. Experience improved engine responsiveness and reliability with this vital addition to your engine

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-109-335/C – Pushrod Tube 1700-2000cc

Description:

Zinc plated for corrosion resistance
Fits 1700-2000cc Type 4 engines
Sold individually

This standard pushrod tube is zinc coated to offer enhanced corrosion resistance and durability. Designed to fit 1700-2000cc Type 4 engines, it provides a reliable replacement for your engine’s pushrod tube needs. Sold individually, it’s an essential component for maintaining your engine’s performance and longevity. Eight pushrod tubes are required per vehicle, plus seals.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-109-335/C/SS – Pushrod Tube 1700-2000cc, Stainless Steel

Description:

Stainless steel push rod tube for 1700-2000cc type 4 engines. Sold individually.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-109-339 – Pushrod Tube Retaining Wire 1700-2000cc

Description:

Ensures proper alignment of pushrod tubes
Prevents movement, avoiding seal leaks
Designed for 1700-2000cc Type-4 engines

This Pushrod Tube Retaining Wire is a crucial component for 1700-2000cc Type-4 engines, designed to secure the pushrod tubes in place. It aligns and holds the tubes firmly to prevent movement, which is vital to avoid pushrod seal leaks. Without this retaining wire, the pushrod tubes can shift, compromising the seals and causing potential oil leaks.

By using this high-quality retaining wire, you ensure a tight and secure fit for the pushrod tubes, promoting engine longevity and optimal performance. Ideal for both restoration and maintenance, this simple yet effective part guarantees that your pushrod seals remain intact and leak-free.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-109-345/A – Pushrod Tube Seal Small 1700-2000cc

Description:

Seals pushrod tube to crankcase for leak prevention
Designed for 1700-2000cc Type-4 engines
Ensures a secure, tight fit for reliable performance

This Pushrod Tube O-Ring is specifically designed for 1700-2000cc Type-4 engines, providing a reliable seal between the pushrod tube and the crankcase. The O-ring prevents oil leaks, ensuring the engine operates smoothly and efficiently. A critical component for maintaining engine integrity, it ensures that the pushrod tube stays securely in place while keeping oil from escaping.

Made from durable materials, this O-ring guarantees long-lasting performance and easy installation. Whether you're performing maintenance or a full engine rebuild, this essential part is a must-have for keeping your engine leak-free and running at its best.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:21.3x3.5

Additional Vehicle Info: 914,T25,T2 Bay

021-109-349/B – Pushrod Tube Seal Large 1700-2000cc

Description:

Seals pushrod tube to cylinder head for leak prevention
Designed for 1700-2000cc Type-4 engines
Ensures a tight, secure fit for optimal engine performance

This Pushrod Tube O-Ring is engineered to create a reliable seal between the pushrod tube and the cylinder head in 1700-2000cc Type-4 engines. By preventing oil leaks, it helps maintain engine efficiency and reliability. The O-ring ensures that the pushrod tube stays properly positioned, protecting the engine from potential oil loss and performance issues.

Durable and easy to install, this O-ring is essential for both maintenance and restoration projects. It ensures a secure, leak-free fit, keeping your engine running smoothly for years to come.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-109-469 – Timing Chain Sliding Rail 2.8 VR6 AES

Description:

Timing chain sliding rail on the bottom crank sprocket.
2.8 litre AES engine code.

Compatible Vehicles: - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk4 (1998,1999,2000,2001,2002,2003,2004,2005,2006) - T4 (1996,1997,1998,1999,2000) - T5 (2003,2004,2005,2006,2007,2008,2009,2010)

Notes:This is a special order item, please allow for up to 4 weeks for delivery. We recommend that you also change the bottom chain tensioner part ID: 021-109-467 and check timing chains, sprockets for damage and replace if necessary.

Additional Vehicle Info: Golf Mk3,Golf Mk4,Transporter T4,Transporter T5,Vento

021-109-503/A – Timing Chain for 2.8 VR6

Description:

This is the second timing chain above the first chain which is connected to the bottom crank sprocket, links from the 2x18 sprocket, to the top two sprockets.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996) - T4 (1996,1997)

Notes:Corrado VR6 with ABV engine code 1991-1995 Mk3 Golf VR6 up to engine number >> AAA 217 001 1992-1996 T4 VR6 with AES engine code 01/1996-09/1996. We recommend you check all the sprockets for damage and replace both timing chains at the same time. It is vital the sprockets are not missing any teeth. Please also check the tensioner's for damage or excess wear and replace if necessary. On assembly insure all the chains and moving parts are sufficiently lubricated.

Additional Vehicle Info: Corrado,Golf Mk3,Golf Mk3 Cabrio,Transporter T4,Vento

021-109-503/D – Timing Chain Kit, 2.8 VR6, Engine Code AAA

Description:

Complete timing chain kit for VR6 engines
Includes runners, chains, and tensioner
Compatible with Mk3 Golf from engine number AAA 217 000>>

This Timing Chain Kit is designed specifically for VR6 engines, offering a complete solution for maintaining engine performance. It includes all the essential components such as runners, chains, and a tensioner to ensure smooth operation and longevity of your engine's timing system.

Compatible with Mk3 Golf models starting from engine number AAA 217 000>>, this kit is an ideal replacement for worn or damaged timing chains. Keep your engine running at its best with this high-quality, durable kit tailored for precise fitment and reliability

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1997,1998) - Golf Mk4 (1998,1999,2000,2001) - T4 (1997,1998,1999)

Notes:This kit can be fitted to Corrado ABV engine codes, but you will also need to purchase the upper duplex chain - part number 021109503A as this kit is supplied with a simplex upper chain. Kit includes the later upgraded tensioner bolt and guide which fits without modification

Additional Vehicle Info: Corrado,Golf Mk3,Golf Mk4,Transporter T4

021-109-507/A – Timing Chain Tensioner for VR6 Engines

Description:

Timing chain tensioner for secoundy chain.

Vehicle fitments
T4 VR6 with AES engine code up to engine number >>003 278
Corrado VR6 with ABV engine code
Mk3 Golf VR6 AAA engine up to engine >>AAA-217 000

Compatible Vehicles: - Corrado (1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997) - T4 (1996,1997)

Notes:It is advised you check for excess wear and damage and replace if necessary all of the timing chains, tensioner's and sprockets at the time of disassembly. It is vital that all the moving components are sufficiently lubricated at the time of reassembly.

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-109-509/A – Upper Tensioner Timing Chain Slide Rail VR6

Description:

VR6 timing chain slide rail for the upper tensioner.

Vehicle fitments
T4 01/96-08/96 2.8 VR6
Corrado with ABV engine code
Mk3 Golf 92/08-1996 with AAA engine code up to engine number >>AAA 217 000

Compatible Vehicles: - Corrado (1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996) - T4 (1996)

Notes:We recommend that on disassembly you check all the timing chains, tensioners and sprockets for excess wear or damage and replace if necessary. Please insure that on reassembly all the moving parts are sufficiently lubricated.

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-109-509/E – Upper Tensioner Timing Chain Slider Rail VR6

Description:

VR6 timing chain slider rail for the upper tensioner.

Mk3 Golf 06/1996-1998 with AAA engine code from engine number >>AAA 217 001
T4 08/1996-2000 with AES engine code from engine number AES 003 279>>>

Compatible Vehicles: - Golf Mk3 (1997,1998) - Golf Mk4 (1998,1999,2000,2001) - T4 (1996,1997,1998)

Additional Vehicle Info: Golf Mk3,Golf Mk4,Transporter T4

021-109-513 – VR6 Timing Chain Middle Slider Rail

Description:

Timing chain middle slider rail for VR6 engines

Vehicle fitment
Corrado 07/1994-07/1995 with ABV engine code
T4 1996-1998 with AES engine code.
Mk3 Golf 1992-1998 with AAA engine code

Compatible Vehicles: - Corrado (1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-109-601 – Inlet Valve 39.3mm x 8mm 1700-2000cc

Description:

Standard inlet valve for 1700-2000cc Type 4 engines.

To fit:

T2 1974-1975 AP engine code from AP027466-AP055000

T2 1974-1975 ED engine code from ED000640-ED025000

T25 1980-1983 CU engine

T25 1980-1983 CV engine

914 1970-1973 1700cc engine only

Compatible Vehicles: - T2 Bay (1974,1975) - 914 (1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-109-601/A – Inlet Valve 37.5mm x 8mm 2000cc

Description:

Cylinder head Inlet valve. To fit 2000cc CJ type 4 engines.

Compatible Vehicles: - T2 Bay (1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

021-109-623/H – Cylinder Head Valve Spring, Outer for 1.9-2.1 Waterboxer

Description:

Cylinder head valve spring, outer for 1.9-2.1 waterboxer engines.

Compatible Vehicles: - T25 (1983,1984,1985,1986,1987,1988,1989,1990,1991)

Notes:Outer Spring also available: 021-109-623\/H

Additional Vehicle Info: T25

021-109-623/K – Valve Spring 1700-2000cc

Description:

Valve Spring for Type 4 engines 1700-2000

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-109-641/B – Valve Retainer 1700-2000cc Standard

Description:

Valve spring retainer (each)

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:This is a special order item. We advise that upon disassembly, you check all the valve springs, retainers and all components in the cylinder head, for excessive wear and or damage and replace as necessary.

Additional Vehicle Info: T25,T2 Bay

021-109-651 – Valve Collet

Description:

Valve collet, sold in singles x2 required per valve.

Compatible Vehicles: - Corrado (1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998,1999,2000,2001,2002) - Golf Mk4 (1998,1999,2000,2001,2002,2003,2004,2005,2006) - Polo Mk1/2 (1991,1992,1993,1994) - Polo Mk3 6N (1995,1996,1997,1998,1999,2000,2001,2002) - T4 (1996,1997,1998,1999,2000,2001,2002,2003) - T5 (2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015)

Additional Vehicle Info: Corrado,Golf Mk3,Golf Mk3 Cabrio,Golf Mk4,Polo Mk3 6N,Polo Mk1/Mk2,Transporter T4,Transporter T5,Vento

021-115-175 – Oil Strainer 1700-2000cc

Description:

Ensures clean, uncontaminated oil for engine longevity
Fits 1700cc to 2000cc Type-4 aircooled engines (1971–1983)
Gauze filter design for optimal oil filtration

This Oil Strainer is designed to provide clean, uncontaminated oil, which is essential for prolonging the life of your engine. The high-quality gauze filter effectively traps debris and particles, ensuring that only purified oil circulates through your engine. It is specifically made to fit the sump of all 1700cc to 2000cc Type-4 aircooled engines from 1971 to 1983.

By using this oil strainer, you help protect critical engine components from damage caused by contaminated oil. Easy to install and reliable in performance, this part is a must-have for any engine restoration or maintenance, ensuring your engine runs smoothly for years to come.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 engines. 021-198-031/B is the oil change gasket set required when fitting.

Additional Vehicle Info: 914,T25,T2 Bay

021-115-193/B – Nut, Oil Strainer Cover, 1700-2000cc Aircooled

Description:

Exact reproduction of the original VW sump plate nut for 1700–2000cc Busses
Torque to just 9 ft/lbs—over-tightening can cause damage to the crankcase
Replace sealing ring & gaskets when removing (see part 021-198-031/B)

This oil strainer cover nut is a precision-made reproduction of the original Volkswagen part, designed specifically for 1700–2000cc VW Busses. It ensures a secure fit for your sump plate while maintaining OEM standards for reliability and performance.

Important: this nut must only be tightened to 9 ft/lbs to avoid damage. Always replace the sealing ring and oil filter screen gaskets when removing the nut—refer to part number 021-198-031/B for replacements. A small but essential component.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983) - Vanagon (1980,1981,1982,1983)

Additional Vehicle Info: 912,914,T25,T2 Bay

021-115-317/A – Upper Oil Filler Pipe with Cap & Clip 1700-2000cc

Description:

Upper oil filler pipe with cap & clip.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: T2 Bay

021-115-351/A – Oil Filter 1700-2000cc

Description:

Fits 1700-2000cc Type 4 engines
High-quality Meyle construction
Easy screw-on installation

This external screw-on oil filter is designed to fit 1700-2000cc Type 4 engines, providing excellent filtration for optimal engine protection. Made by Meyle, a brand known for its top-quality products, this filter ensures consistent and reliable performance.

With its easy screw-on design, installation is quick and straightforward. Whether you're doing routine maintenance or replacing an old filter, this oil filter offers durability and long-lasting performance for your vehicle.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-115-351/A/BQ – Oil Filter 1700-2000cc

Description:

Easy-to-install screw-on design
Removes dust, soot, and metal particles
Compatible with 1700-2000cc Type 4 engines

This external screw-on oil filter is a reliable choice for 1700-2000cc Type 4 engines. It helps keep your engine oil clean by filtering out dust, soot, and small metal particles, contributing to smoother engine performance.

Made with durable materials, this filter provides consistent protection throughout its service life. By reducing the amount of harmful debris in your engine, it helps to minimise wear and prolong engine life.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-115-359/A – Oil Filter Mount Gasket 1700-2000cc

Description:

Oil filter mount gasket for 1.7-2.0 Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-115-421/B – Oil Pressure Relief Spring

Description:

Maintains correct oil pressure regulation
Essential for engine longevity and performance
Fits 1700-2000cc Type 4 engines, 1600cc CT T25 engine and T25 Waterboxer engines.

This spring is designed for the oil pressure relief valve, a critical component that helps regulate oil pressure within the engine. A worn or weakened spring can lead to incorrect oil pressure, risking engine damage or poor performance.

Suitable for a wide range of VW engines, including 1700–2000cc aircooled engines, the 1600cc CT engine in the T25, and T25 Waterboxer engines. A simple but vital part to replace during engine rebuilds or oil system servicing.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

021-115-487 – Oil Breather Gasket 1700-2000cc

Description:

Oil breather gasket for 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 914,T2 Bay,Type 3

021-115-562 – Oil Filter for VR6 2.8 & 2.9

Description:

Oil filter for 2.8 & 2.9 VR6

Compatible Vehicles: - Corrado (1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996)

Notes:Corrado VR6 2.9 with ABV engine code 1991-1995 Mk3 Golf VR6 2.8 with AAA engine code up to engine number >>176 889

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-115-562/A – Oil Filter 2.8 VR6 and 3.2

Description:

Oil filter for 2.8 VR6 and 3.2.

Compatible Vehicles: - Golf Mk3 (1996,1997,1998) - T4 (1996,1997,1998) - T5 (2008,2009,2010)

Notes:Mk3 Golf VR6 2.8 with AAA engine code from engine number 176 890>> T4 VR6 2.8 with AES engine code T5 05/07-05/08 3.2 BDL engine code.

Additional Vehicle Info: Golf Mk3,Transporter T4,Transporter T5,Vento

021-115-562/A/BQ – Oil Filter 2.8 VR6 and 3.2

Description:

Best Quality Mahle Oil filter for 2.8 VR6 and 3.2 Bi turbo

To fit
Mk3 Golf VR6 2.8 with AAA engine code from engine number 176 890>>
T4 VR6 2.8 with AES engine code
T5 05/07-05/08 3.2 BDL engine code.

Compatible Vehicles: - Golf Mk3 (1997,1998) - T4 (1996,1997,1998,1999,2000) - T5 (2007,2008)

Additional Vehicle Info: Golf Mk3,Transporter T4,Transporter T5

021-115-562/A/G – Oil Filter 2.8 VR6 and 3.2

Description:

Oil filter for 2.8 VR6 and 3.2 Bi turbo

To fit
Mk3 Golf VR6 2.8 with AAA engine code from engine number 176 890>>
T4 VR6 2.8 with AES engine code
T5 05/07-05/08 3.2 BDL engine code.

Compatible Vehicles: - Golf Mk3 (1996,1997,1998) - T4 (1996,1997,1998,1999,2000) - T5 (2008,2009,2010)

Additional Vehicle Info: Golf Mk3,Transporter T4,Transporter T5

021-117-021/B – Oil Cooler, 1700-2000cc Type-4 Engines

Description:

High-quality oil cooler for efficient engine performance
Designed for 1700-2000cc Type 4 engines
Easy installation and reliable fit for your vehicle

Upgrade your engine with this standard replacement oil cooler, specifically designed for 1700-2000cc Type 4 engines. It ensures optimal cooling and helps maintain engine temperature, promoting better performance and longevity.

Made from durable materials, this oil cooler is built to withstand harsh conditions and provide reliable operation. Its straightforward installation process means you can get back on the road quickly, keeping your engine running smoothly.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:Some clearancing of the outer casing may be required to clear the oil filter mount.

Additional Vehicle Info: 912,914,T25,T2 Bay

021-117-151/A – Oil Cooler Seal 1200-1600cc or 1700-2000cc

Description:

Compatible with late single-port, all twin-port & 1700–2000cc Type 4
Quantity required: 2 for single-port/Type 4, 4 for twin-port
Sold individually – use 111-117-151 for early single-port

This oil cooler seal is designed for use on late single-port engines, all twin-port engines, and 1700–2000cc Type 4 engines. It ensures a tight, leak-free connection between the oil cooler and engine case, helping maintain proper oil pressure and cooling efficiency.

Each engine type requires a specific number of seals: two for late single-port and Type 4 engines, and four for twin-port engines. Sold individually, so be sure to order the correct quantity for your setup. For early single-port engines, use part number 111-117-151.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1971,1972,1973,1974,1975,1976,1977,1978,1979) - Caddy Mk1 (1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983,1984) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Karmann Ghia (1971,1972,1973,1974) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - Scirocco (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992) - Type 3 (1971,1972,1973) - T25 (1980,1981,1982,1983)

Notes:

To fit engine numbers:
1200 SP D - From 0525050
1300 SP E - From 0020022 to 0022000
1300 SP F - From 1778669 to 2200000
1500 SP H - From 1124669 to 1350000
1500 SP L - From 0024107 to 0026500
1300 TP AB to 990000
1300 TP AC to 010000
1600 TP AD to 990000
1600 TP AF 000001 onwards
1300 TP AR to 150000
1600 TP AS 000001 onwards
Plus most other twin port and 1700-2000 Type 4 engines

Additional Vehicle Info: 912,914,Beetle,Beetle Cabriolet,Caddy,Golf Mk1 Cabriolet,Golf Mk1,Karmann Ghia,Scirocco,T25,T2 Bay,Type 3

021-119-125/A – Fan Hub O-Ring 1700-2000cc

Description:

Fan hub o-ring for Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: 914,T25,T2 Bay

021-119-207 – Fan Housing Grille 1700-2000cc

Description:

Durable design for reliable engine protection
Perfect fit for Type 4 engines
Protects airflow and cooling efficiency

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: 914,T25,T2 Bay

021-119-245 – Oil Dipstick Bellows 1700-2000cc

Description:

Oil dipstick bellows made of nitrile butyl rubber for Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: T25,T2 Bay

021-119-249/E – Timing Scale 1700-2000cc

Description:

Ignition timing scale. Fits all 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-119-263/A – Lower Fan Shroud Air Flaps, Pair, 1700-2000cc Type 4 Engines

Description:

Fits 1700-2000cc Type 4 engines perfectly
Enhances cooling efficiency with durable design
Supplied in pairs for complete coverage

The Lower Fan Shroud Air Flaps are specially designed for 1700-2000cc Type 4 engines. These air flaps play a crucial role in optimising the engine's cooling system by directing airflow precisely where it's needed most. Crafted to fit seamlessly, they help maintain a consistent temperature, ensuring your engine runs smoothly and efficiently.

Made from high-quality materials, these air flaps are built to last, providing long-term performance in various driving conditions. By enhancing airflow, they contribute to the overall health and longevity of your engine. Supplied in pairs, these flaps offer a complete solution for your engine’s cooling needs.

Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-119-329 – Oil Cooler Seal for Type 4 Engine

Description:

Oil cooler seal. To fit type 4 Aircooled engines 1700-2000

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-119-337 – Air Hose Grommet Oval/Right 1700-2000cc

Description:

Ensures secure fit for right-hand oval air hose
Fits through cylinder tinware on Type-4 engines
High-quality replacement part by Forst

This Air Hose Grommet is designed to fit the right-hand oval air hose through the cylinder tinware on Type-4 engines. It provides a secure and stable fit, preventing air hose movement and maintaining the efficiency of the engine’s air circulation. Manufactured by Forst, this grommet is a durable, high-quality replacement part for restoring or maintaining your engine.

Ideal for Type-4 engine owners, this grommet helps seal the air hose to ensure smooth operation and prevents unwanted air leaks. Its robust construction makes it a reliable choice for both restoration projects and routine maintenance.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: T2 Bay

021-119-569. – Grommet 29.5 x 6mm

Description:

Rubber Grommet 29,5x6mm

Various applications.

Quality part manufactured by Forst

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - Golf Mk1 Cabriolet (1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993) - Jetta (1979,1980,1981,1982,1983) - Scirocco (1974,1975,1976) - T25 (1980,1981,1982,1983)

Notes:Mk1 Golf - Used in the speedo cable assembly Type 3 - Used in the tinware

Additional Vehicle Info: Golf Mk1 Cabriolet,Golf Mk1,Jetta,Scirocco,T25,T2 Bay

021-119-569/A – Rubber Grommet 23.5 x 6mm

Description:

Durable rubber grommet, 23.5 x 6mm size
Ideal for various vehicle applications and fitment
Perfect for wiring, fuel lines, brake hoses, and more

This high-quality Rubber Grommet, measuring 23.5 x 6mm, is a versatile solution for a variety of applications in different vehicle models. It provides a secure and durable fit for hoses, wiring looms, and vacuum lines, ensuring proper sealing and protection against wear and tear.

Suitable for a range of vehicles, including Beetle, Baywindow, Transporter T4, T25, T3, Mk4 Golf, 911, and 914, it’s perfect for use in areas like fuel lines, wiring looms, sunroof drain tubes, hydraulic brake lines, and more. Whether you're working on your classic car or modern vehicle, this grommet offers the reliability and durability you need.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk4 (2002,2003,2004) - Karmann Ghia (1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 911 (1974,1975,1976,1977,1978,1979,1980,1981,1982,1983) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - 928 (1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994,1995) - 930 (1975,1976,1977,1978,1979,1980,1981,1982,1983) - 944 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:

Used in various applications across the VW and Porsche range.
Fitment Examples:
Beetle: Fuel flexi pipe to body and the wiring loom through the body.
Baywindow: Fuel lines that run through the tinware, the wiring loom through the body, vacuum lines and hydraulic brake lines.
Transporter T4: Hydraulic hose that runs under the pedal cluster through the body.
T25: Fuel lines through the body.
T3: Sunroof drain tube, wiring loom and fuel line to body.
Mk4 Golf: Charcoal canister lines
911: Windscreen washer bottle hose
914: Tinware

Additional Vehicle Info: 911,924,928,930,944,Beetle,Beetle Cabriolet,Golf Mk4,Karmann Ghia,Transporter T4,Trekker,T2 Bay,Type 3

021-119-627/B – Air Hose Grommet Round/Left 1700-2000cc

Description:

Round left hand air hose grommet for 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-119-751 – Thermostat Cable, CT or 1700-2000cc

Description:

Thermostat cable suitable for 1700-2000cc Type 4 engines and T25 1600cc CT Aircooled engines. For CT code engine you will need to shorten to 350mm.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-119-957 – Oil Pressure Switch Rubber Boot 1700-2000cc

Description:

Protects oil pressure switch from dirt and debris
Fits between oil pressure switch and tinware
Designed specifically for VW Type-4 engines

This Oil Pressure Switch Rubber Boot is designed to fit between the oil pressure switch and the tinware on VW Type-4 engines. It serves as a protective barrier, shielding the oil pressure switch from dirt, debris, and moisture that could compromise its function. By using this boot, you help ensure reliable oil pressure readings and the overall longevity of your engine.

Made from durable rubber, this high-quality boot is easy to install and provides a tight, secure fit. It's an essential component for maintaining the cleanliness and proper function of your engine's oil pressure system, making it ideal for both restoration and maintenance of your VW Type-4 engine.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: T25,T2 Bay

021-121-004 – Water Pump VR6

Description:

Water pump for VR6 applications.

Engine fitment codes:
AAA 2.8 VR6
ABV 2.9 VR6
AES 2.8 VR6

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-121-050/C – Water Pipe for VR6 Water Pump to Distribution Box

Description:

Water pipe, located across the front of the engine block. Runs between the water pump housing and the main distribution junction housing.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000)

Notes:We advise that you also replace the two seals either end of this pipe, these seals are part ID N10-139-201 x2. In addition, we advise that during disassembly, you check all the relative components and pipe work for damage and or excessive wear and replace as necessary.

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-121-058/A – Coolant Hose From Oil Cooler To Water Pipe VR6

Description:

Water hose, located between the oil cooler and plastic water pump pipe.

Fits all 2.8 and 2.9 VR6 engines.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998,1999,2000) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk3,Golf Mk3 Cabrio,Transporter T4,Vento

021-121-096 – Coolant Hose From Oil Cooler To Cylinder Block VR6

Description:

Coolant hose, located between the oil cooler and engine block.

Fits VR6 engine codes: AES, AAA, ABV engines

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-121-117/A – Thermostat Housing, 2.8-2.9 VR6

Description:

Thermostat housing including rubber base seal for VR6 engines.

Engine fitment codes:
AAA 2.8 VR6
ABV 2.9 VR6
AES 2.8 VR6

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-121-119/A – Sealing Gasket Thermostat to Cylinder Block 2.8-3.2

Description:

Sealing gasket, located between thermostat housing and cylinder block for VR6 2.8, 2.9 engines and 3.2 litre engines.

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998) - Golf Mk4 (1998,1999,2000,2001,2002,2003,2004,2005,2006) - T4 (1996,1997,1998,1999,2000) - T5 (2003,2004,2005,2006,2007,2008,2009,2010)

Additional Vehicle Info: Corrado,Golf Mk3,Golf Mk3 Cabrio,Golf Mk4,Transporter T4,Transporter T5,Vento

021-121-121/A – Thermostat Pipe Union VR6

Description:

Thermostat cover/pipe union for all VR6 engines.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-121-133/D – VR6 Water Pump Flange Complete with O-ring Seal

Description:

VR6 Water pump flange complete with O-ring seal.

Engine fitment codes:
AAA 2.8 VR6
ABV 2.9 VR6
AES 2.8 VR6

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-127-025/B – SSP Mechanical Fuel Pump 1700-2000cc

Description:

Compatible with E10 fuel
Delivers 3-4 PSI fuel pressure
Includes base gasket; side mount design

The SSP Mechanical Fuel Pump, designed exclusively for SSP in Europe, is an ideal replacement for 1700-2000cc Type 4 engines. This pump delivers a consistent 3-4 PSI fuel pressure, ensuring reliable fuel flow and optimal engine performance. Its side mount design and included base gasket make installation straightforward and hassle-free.

Compatible with E10 fuel, this pump is built to meet modern fuel requirements while maintaining the rebuildable feature of the original design. This durability and rebuildability make it a practical choice for restoring or upgrading your Type 4 engine’s fuel system, offering long-lasting reliability and performance.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 engine. 3-4 PSI. Side mount. Supplied with 1 base gasket. It is possible to remove the top and re-position it to alter the orientation of the inlet & outlet pipes. This pump is a '76-on design but will fit all earlier models. Early pumps had 7mm inlet hose, this pump uses 5.5mm. You may need to fit 5.5mm inlet hose if using on an early engine. Vent pipe on the underside requires an appropriate 4mm hose routed through the lower tinware.

Additional Vehicle Info: T25,T2 Bay

021-127-303/A – Intermediate flange

Description:

The Bakelite fuel pump base flange for standard fuel pumps on 1700-2000cc Type 4 engines running carburettors.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:Requires 2x 021-127-311\/A fuel pump gaskets when fitting.

Additional Vehicle Info: T25,T2 Bay

021-127-307/A – Fuel Pump Pushrod 1700-2000cc

Description:

Fuel pump pushrod made to OE specification by SSP.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:For 1700-2000cc Type 4 engine.

Additional Vehicle Info: T25,T2 Bay

021-127-311/A – Intermediate Flange Gasket, Fuel Pump

Description:

Ensures a secure seal between fuel pump and engine
Prevents leaks and enhances fuel system efficiency
Durable material for long-lasting performance

This fuel pump intermediate flange gasket provides a tight, reliable seal to prevent oil leaks and maintain optimal engine performance. Designed for durability, it helps keep your fuel system running smoothly.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-129-620/ / – Air Filter, Square, 58mm Deep

Description:

58mm depth for optimal airflow
Square design fits various models
Check fitment guide for compatibility

This square air filter, with a depth of 58mm, is engineered to deliver efficient filtration and improved airflow for a wide range of engines. Its universal design ensures compatibility with multiple models—just refer to the fitment guide below to confirm the perfect match for your vehicle. Ideal for maintenance or performance upgrades

To fit:

Volkswagen

Baywindow 1975-1979 - 1600-2000 engines including Type 4

T25 - 1.6 CT, CZ, 2.0 CU, CV, 1.9 DF, DG, DH, GW, 2.1 DJ

T25 - 1.9 DG engine up to chassis number 24-F-037 754

Polo Mk2/2f 1982-1994 - 1.3 Digijet NZ, GK, PY, 3F

Porsche

914-4 1.8 1974-1976 carburettor models only

924 2.0 1976-1985

Please note: This will not fit industrial 127 engines or 1974 injection engines. Use part number 039-129-620/A.

Compatible Vehicles: - T2 Bay (1975,1976,1977,1978,1979) - 914 (1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Polo Mk1/2 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: 914,924,Polo Mk1/Mk2,T25,T2 Bay

021-129-620/BQ – Air Filter

Description:

Air filter. This is a square filter and 58mm deep.

To fit:
Volkswagen
Baywindow 1975-1979 - 1600-2000 engines including Type 4
T25 - 1.6 CT, CZ, 2.0 CU, CV, 1.9 DF, DG, DH, GW, 2.1 DJ
T25 - 1.9 DG engine up to chassis number 24-F-037 754
Polo Mk2/2f 1982-1994 - 1.3 Digijet NZ, GK, PY, 3F
Porsche
914-4 1.8 1974-1976 carburettor models only
924 2.0 1976-1985

Please note: This will not fit industrial 127 engines or 1974 injection engines. Use part number 039-129-620/A.

Additional Vehicle Info: 914,924,Polo Mk1/Mk2,T25,T2 Bay