Fitment #3

021-129-620/M – Air Filter

Description:

58mm depth for optimal airflow.
Not compatible with industrial 127 engines.
Avoid use with 1974 injection engines.

This replacement air filter is designed to provide efficient filtration with its 58mm depth, ensuring clean air intake for your engine. It is suitable for various models but not for industrial 127 engines or 1974 injection engines. For those, please refer to part number 039-129-620/A.

To fit:
Volkswagen
Baywindow 1975-1979 - 1600-2000 engines including Type 4
T25 - 1.6 CT, CZ, 2.0 CU, CV, 1.9 DF, DG, DH, GW, 2.1 DJ
T25 - 1.9 DG engine up to chassis number 24-F-037 754
Polo Mk2/2f 1982-1994 - 1.3 Digijet NZ, GK, PY, 3F
Porsche
914-4 1.8 1974-1976 carburettor models only
924 2.0 1976-1985

Compatible Vehicles: - T2 Bay (1975,1976,1977,1978,1979) - 914 (1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - Polo Mk1/2 (1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992,1993,1994) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Notes:

Additional Vehicle Info: 914,924,Polo Mk1/Mk2,T25,T2 Bay

021-129-637/C – Rubber Elbow for Air Vacuum Pipe and Fuel Breather

Description:

Dual-purpose elbow for fuel tank breather and brake booster vacuum line
8mm / 10mm ends for secure fitment
Sold individually

This rubber elbow is a versatile component used in the VW T2 Bay models from 1972 to 1973. It serves two key functions: as a connector for the fuel tank breather system and as a vacuum pipe elbow for the brake booster line.

With 8mm and 10mm ends, it ensures a snug and reliable fit in both applications. Made from durable rubber to withstand fuel vapours and vacuum pressure, this elbow is sold individually—check your system to determine how many are needed.

Compatible Vehicles: - T2 Bay (1972,1973)

Notes:

for 1700cc motors

Additional Vehicle Info: T2 Bay

021-129-637/FF – Balance Pipe Elbow, 90 Degree

Description:

Prevent air leaks and improve engine performance.
Durable rubber construction by FORST.
Ensures a longer-lasting, healthier engine.

Upgrade your 2.0-litre air-cooled VW Bus with these premium balance pipe elbows, designed to restore optimal engine performance. Cracked or worn-out rubber elbows can lead to air leaks in the inlet manifold, causing poor running and potentially shortening your engine's lifespan. Replacing these essential components ensures smooth operation and reliable performance.

Manufactured by FORST, these high-quality rubber elbows are designed to fit perfectly on each inlet manifold, just below the carburettor. Their durable construction resists cracking and wear, providing a long-lasting solution for maintaining your vehicle. Keep your VW Bus running like a dream with this simple yet crucial rubber elbow.

Compatible Vehicles: - T2 Bay (1976,1977,1978,1979) - 914 (1974,1975,1976)

Notes:

Top: 16.8mm OD x 11mm ID

Bottom: 14mm OD x 8.8mm ID

For 1.8-2.0 litre aircooled engines equipped with twin carburettors.

Additional Vehicle Info: 914,T2 Bay

021-129-639 – Rubber Elbow for Air Vacuum Pipe

Description:

Left hand side air filter connecting elbow. Each

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-129-707/D – Inlet Manifold Gasket 1700-2000cc

Description:

Inlet manifold to cylinder head gasket. Fits 1700-2000cc Type 4 engines. 2 required per cylinder head. Each

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-129-707/E – Inlet Manifold Gasket 1800cc AP

Description:

Cylinder head to inlet manifold gasket. Type 4 engine 1800cc only.

Compatible Vehicles: - T2 Bay (1974,1975) - 914 (1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-129-917/C – Carburettor Linkage Bracket Left

Description:

Carburettor support bracket left hand side.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-129-957 – Carburettor Linkage Ball Joint / Stud

Description:

This is a brass replacement for the bush in the cross bar ball socket. This often wears meaning it is difficult to tune your carbs. This ball socket cures that issue.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-129-959 – Carburettor Linkage Spring

Description:

Linkage cup spring. To suit vehicle fitted with a Type 4 AC engine.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-133-227/H – Lower Inlet Manifold Gasket for VR6

Description:

Inlet manifold gasket for VR6 engines, resides between the manifold and cylinder head.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-133-227/J – Intermediate Inlet Manifold Gasket for VR6

Description:

Inlet manifold gasket for VR6, locates between the upper and lower manifolds

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-145-933/C – Ribbed V Belt For VR6 Without Air Con

Description:

Ribbed poly-V-belt for VR6 engines without air conditioning.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Notes:Corrado 2.8/2.9 VR6, ABV Mk3 Golf 2.8 VR6, AAA Covers OE numbers021-145-933\/A021-145-933\/B021-145-933\/C021-145-933\/G

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-145-933/H – Ribbed V Belt For VR6 With Air Con

Description:

Ribbed poly-V-belt for VR6 engines with air conditioning.

To fit
Corrado 2.8/2.9 VR6, ABV
Mk3 Golf 2.8 VR6, AAA

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Additional Vehicle Info: Corrado,Golf Mk3

021-198-009/B – Engine Gasket Set, 1700 Type 4

Description:

Complete gasket set for 1700 CA, CB Type 4 engines.
Excludes main flywheel oil seal and front crank pulley seal.
Durable materials ensure a reliable, leak-free performance.

Revitalise your 1700 CA or CB Type 4 engine with our high-quality engine gasket set. Designed for a perfect fit, this comprehensive kit includes all necessary gaskets to restore your engine's performance and efficiency.

Please note that this set does not include the main flywheel oil seal or the front crank pulley seal. Ensure you have all components needed for a complete overhaul by checking your existing seals before purchase. Get back on the road with confidence!

Compatible Vehicles: - T2 Bay (1972,1973) - 914 (1970,1971,1972,1973)

Additional Vehicle Info: 914,T2 Bay

021-198-011/A – Cylinder Block Gasket Set for VR6

Description:

Cylinder Block Gasket Set for VR6 engines

Corrado from 50-P-009 001>>
Mk3 Golf 92-96

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-198-012 – Cylinder Head Gasket Set for VR6 Engine

Description:

Cylinder head gasket kit for VR6 engines.

Compatible Vehicles: - Golf Mk3 (1992,1993,1994)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-198-031/B – Oil Strainer Gasket Set 1700-2000cc

Description:

Complete gasket set for routine oil changes
Fits 1.7L to 2.0L Type 4 air-cooled engines
High-quality materials for a proper seal

Keep your Type 4 engine running smoothly with this oil change gasket set, designed specifically for 1.7 to 2.0-litre air-cooled engines. This set includes all the essential gaskets and seals needed for a clean and leak-free oil service.

Manufactured from durable, oil-resistant materials, these gaskets provide a reliable seal every time. Whether you're doing regular maintenance or rebuilding an engine, this kit is an essential item for your air-cooled setup.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 912 (1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 912,914,T25,T2 Bay

021-198-075/B – Barrel and Piston Kit Type 4 1700cc Flat top 90x66mm

Description:

Specifically designed for 1700cc CA/CB Type 4 engines
Complete kit includes barrels, pistons, rings, wrist pins, and clips
Restores performance and reliability

Enhance your 1700cc Type 4 engine with this comprehensive Barrel and Piston Kit, designed specifically for the fat top version of the CA/CB models. This kit includes all the essential components for a successful rebuild, featuring high-quality barrels, pistons, rings, wrist pins, and clips.

Perfect for enthusiasts looking to enhance their engine's performance and reliability, this kit ensures a straightforward installation and restores your classic VW to optimal condition. Trust in this reliable solution to keep your Type 4 engine running smoothly and efficiently on the road.

Compatible Vehicles: - T2 Bay (1972,1973) - 914 (1970,1971,1972,1973)

Additional Vehicle Info: 914,T2 Bay

021-198-141/AX – Clutch Kit, 228mm, VR6

Description:

Compatible with AAA and ABV engines
Includes pressure plate, clutch plate, bearing
High-quality Sachs manufacturing

This clutch kit is designed specifically for VR6 2.8 and 2.9 engines with AAA and ABV codes, ensuring a perfect fit and reliable performance. The 228mm kit includes everything you need for a complete clutch replacement: a pressure plate, clutch plate, and release bearing.

Manufactured by Sachs, a trusted name in automotive parts, this kit guarantees durability and smooth operation. Upgrade your vehicle's clutch system with confidence, knowing you have premium components designed for optimal performance.

Compatible Vehicles: - Corrado (1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Notes:

28 Tooth

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-198-141/X – Clutch Kit, 228mm

Description:

Complete kit: plate, pressure plate, bearing
High-quality Sachs manufacturing
Ensures smooth, reliable performance

This 228mm clutch kit, manufactured by Sachs, includes everything you need for a complete clutch replacement. The kit comes with a pressure plate, clutch plate, and release bearing, ensuring all critical components are covered.

Designed for durability and precision, this Sachs clutch kit delivers reliable performance and smooth operation. Whether you're upgrading or replacing a worn-out clutch, trust this high-quality kit to restore your vehicle's driving experience to optimal levels.

Engine fitment codes and year range

T4 - 2.4 AAB 09/90-09/95 up to engine number >AAB370180 2.5 AET 90-03

Mk2 Golf - 1.8 supercharged G60 PG

Corrado - 2.0 16V 9A engine and G60

Mk3 Golf - 1.9 Diesel 1Z, AHU, ALE, AFN - 2.0 16V ABF

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk2 (1990,1991,1992) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Corrado,Golf Mk2,Golf Mk3,Transporter T4,Vento

021-198-175 – Piston Ring Set 1700cc

Description:

Piston ring set. 90mm to fit 1700 air-cooled Type 4 engines (CA/CB/W/EA).

Produced by AA Performance Products, these Piston Rings are great quality reproductions of the original and are produced by the leading manufacturer of aircooled VW specialist Barrel & Piston kits.

Bore 90mm

Top ring 2mm

Middle ring 2mm

Bottom ring 5mm

Compatible Vehicles: - T2 Bay (1972,1973) - 914 (1970,1971,1972,1973) - Type 4 (1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: 914,T2 Bay

021-198-175/A – Piston Ring Set 1800cc

Description:

Piston ring set. 93mm to fit 1800cc air-cooled Type 4 engines (AP/AW/AN/AT/ED/EC).

Produced by AA Performance Products, these Piston Rings are great quality reproductions of the original and are produced by the leading manufacturer of aircooled VW specialist Barrel & Piston kits.

Bore 75mm

Top ring 2mm

Middle ring 2mm

Bottom ring 5mm

Compatible Vehicles: - T2 Bay (1974,1975) - 914 (1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

021-198-335 – Pushrod Tube and Seal Kit 1700-2000cc

Description: Pushrod Tube Kit. Kit includes Pushrod Tubes All 16 seals and 2 rocker cover gaskets.

These high quality standard replacement pushrod tubes and seals are perfect for solving any leaks you have from the pushrod tube seals. A fresh set of tubes and seals can be fitted by removing the cylinder heads and will keep your engine sealed and leak free for many miles.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-198-384/D – Cylinder Head Bolt Kit for VR6

Description: VR6 Cylinder Head Bolt kit

Kit includes
021-103-384/D x10 M11x1.5x119 (SAME AS 021-103-384/G)
021-103-384/F x3 M11x1.5x144
021-103-384/E x7 M11x1.5x85

These are stretch bolts and should all be replaced when changing the head gasket. We recommend you change them all together.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Notes:These are stretch bolts and should all be replaced when changing the head gasket. We recommend you change them all together. Engine fitments AES 2.8 VR6 ABV 2.9 VR6 AAA 2.8 VR6

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-198-471/A – Engine Main Bearing Set 1700-2000cc Std Crank x 0.5mm Case x Std Thrust

Description: Engine Main Bearing set for 1700-2000cc Type 4 engines.

Standard crankshaft.

0.5mm case.

Standard thrust.

These Main Bearings are top quality items produced to the best of tolerances by Mahle.

This set is designed for use with a standard crankshaft and an engine that has had a 0.5mm line bore, with no work to the thrust face of the case.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-473/A – Engine Main Bearing Set 1700-2000cc 0.25 Crank x 0.5mm Case x Std Thrust

Description: Engine Main Bearing set for 1700-2000cc Type-4 engines

0.25mm Undersize Crankshaft

0.5mm Oversized Case

Standard Thrust.

This set is designed for engines that have a 0.25mm reground crankshaft, a 0.5mm line bore and a standard thrust face.

Mahle are an OE supplier and manufacturer of these high quality main bearings designed to fit Type 4 1700cc-2000cc engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-475/A – Engine Main Bearing Set 1700-2000cc 0.5 Crank x 0.5mm Case x Std Thrust

Description: Engine Main Bearing set for 1700-2000cc Type-4 engines

0.5mm Undersize Crankshaft

0.5mm Oversized Case

Standard Thrust.

This set is designed for engines that have a 0.5mm reground crankshaft, a 0.5mm line bore and a standard thrust face.

Mahle are an OE supplier and manufacturer of these high quality main bearings designed to fit Type 4 1700cc-2000cc engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-481/A – Engine Main Bearing Set, 1700-2000cc, Std Crank x Std Case x Std Thrust

Description:

Engine Main Bearing set for 1700-2000cc Type-4 engines
Compatible with standard crankshaft and case bore
Ensures proper fit with standard thrust face

The Engine Main Bearing set is meticulously crafted for 1700-2000cc Type-4 engines, providing a precise fit for standard components. Designed to maintain optimal engine performance, this set caters to engines with a standard crankshaft, case bore, and thrust face. It offers reliable support and reduces wear, enhancing the longevity of your engine.

Ideal for enthusiasts and professionals alike, this bearing set ensures that every part of the engine operates smoothly. By adhering to standard specifications, it simplifies installation while maintaining the engine’s original efficiency and power output. Choose this set for a straightforward, high-quality solution to your engine maintenance needs.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-485/A – Engine Main Bearing Set, 1700-2000cc, 0.50 Crank x Std Case x Std Thrust

Description:

Compatible with 1700-2000cc Type-4 engines
For 0.50mm reground crankshafts
Standard case bore and thrust face

This Engine Main Bearing set is designed for Type-4 engines ranging from 1700-2000cc. It’s ideal for engines with a 0.50mm reground crankshaft, maintaining standard case bore and thrust face specifications.

Ensure proper fitment and smooth operation with these high-quality bearings. They are a reliable choice for engine rebuilding or performance upgrades, offering durability and precision

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-487/A – Engine Main Bearing Set, 1700-2000cc, 0.75 Crank x Std Case x Std Thrust

Description:

Compatible with 1700-2000cc Type-4 engines
For 0.75mm reground crankshafts
Standard case bore and thrust face

This Engine Main Bearing set is designed for Type-4 engines ranging from 1700-2000cc. It’s ideal for engines with a 0.75mm reground crankshaft, maintaining standard case bore and thrust face specifications.

Ensure proper fitment and smooth operation with these high-quality bearings. They are a reliable choice for engine rebuilding or performance upgrades, offering durability and precision

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-491/A – Engine Main Bearing Set 1700-2000cc Std Crank x 0.5 Case x 1.00 Thrust

Description: Engine Main Bearing set for 1700-2000cc Type-4 engines

Standard Crankshaft

0.5mm Oversized Case

1.0mm Oversized Thrust.

This set is designed for engines that have a standard crankshaft, a 0.5mm line bore and a 1.00mm cut thrust face.

Mahle are an OE supplier and manufacturer of these high quality main bearings designed to fit Type 4 1700cc-2000cc engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-503 – Timing Chain Kit, 2.8 VR6, Engine Codes AES, AAA, ABV

Description:

Complete kit for VR6 engines
Includes runners, chains, and tensioner
Fits T4, Mk3 Golf, Corrado with specific engine codes

This high-quality Timing Chain Kit is designed for VR6 engines, ensuring a reliable and efficient performance. It includes all the essential components: runners, chains, and tensioners, providing everything you need for a complete timing chain replacement.

The kit is compatible with various vehicle fitments, including the T4 (AES), Mk3 Golf up to engine number >>AAA 217 000, and the Corrado with the ABV engine code. Whether you're repairing or upgrading your timing chain, this kit ensures a precise fit and long-lasting durability for your engine.

Compatible Vehicles: - Corrado (1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996) - T4 (1996,1997,1998,1999,2000)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4

021-198-541 – Camshaft Bearing Set, Standard, 1700-2000cc

Description:

High-Quality Bearings: Designed for durability and performance.
Perfect Fit: Compatible with Type 4 engines, 1700-2000cc.
Vehicle Specific: Fits Baywindow buses (1972-79) and T25s (1980-83).

Upgrade your Type 4 engine with our standard camshaft bearing set, specifically engineered for 1700-2000cc models. Crafted to deliver superior performance and reliability, these bearings ensure your engine runs smoothly and efficiently. Whether you're restoring a classic Baywindow bus or maintaining a T25, this bearing set is a perfect fit for your needs.

Our camshaft bearing set is ideal for those who demand quality and compatibility in their automotive parts. Designed to meet the exact specifications of Type 4 engines from 1972 to 1983, you can trust this product to enhance the longevity and functionality of your vehicle. Invest in your engine's performance with this reliable and precise bearing set.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-198-905 – Engine Service Kit 1700-2000cc

Description:

Engine Service Kit for 1700-2000cc Type 4 engines. The kit includes Spark Plugs, Rotor Arm, Distributor Cap, Bosch HT Leads, Rocker Gaskets, Oil Filter and an Oil change gasket set.
Points and condenser need to be ordered separately if required.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-199-231/C – Rear Engine Mount 1700c-2000cc

Description:

Designed for 1700-2000cc Type-4 engines in T2 Baywindow
Mounts between engine support bar and engine
2 mounts required per engine for secure installation

This Rear Engine Mount is specifically designed for 1700-2000cc Type-4 engines in T2 Baywindow buses. It mounts between the engine support bar and the engine, providing essential support and stability. Two mounts are required per engine to ensure proper alignment and secure attachment.

Made from durable materials, this high-quality rear engine mount is built to withstand the rigors of daily driving and provide long-lasting performance. Whether you're restoring or maintaining your T2 Baywindow bus, this part is essential for ensuring a smooth-running engine and preventing excessive vibration.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979)

Notes:For 1700-2000cc Type 4 engine. Supplied individually, 2 required per vehicle.

Additional Vehicle Info: T2 Bay

021-251-171/C – Exhaust Tail Pipe with Damper

Description:

Manufactured to OE standards
High quality materials

To fit:

Porsche

914 1.7 01/1969-02/1973

Volkswagen

Type 4 (not Variant) 1.7 07/1968-07/1969

Compatible Vehicles: - 914 (1970,1971,1972,1973) - Type 4 (1969)

Additional Vehicle Info: 914

021-251-171/M – Exhaust Tail Pipe with Damper

Description:

Manufactured to OE standards
High quality materials
Outlet on left side, length 850 mm

To fit:

Porsche

914 1.7, 1.8 03/1973-02/1976

Volkswagen

Type 4 (not Variant) 1.7, 1.8 08/1969-03/1975

Compatible Vehicles: - 914 (1974,1975,1976) - Type 4 (1970,1971,1972,1973,1974)

Additional Vehicle Info: 914

021-251-185/ES – Tail Pipe Stainless Steel

Description:

Premium stainless steel construction for durability
Designed for Baywindow 1700-2000cc Type 4 engines
Compatible with T25 DH 1.9 Waterboxer (US spec only)
Easy installation, replaces OEM exhaust tailpipe

Upgrade your vehicle's exhaust system with this top-quality stainless steel tailpipe from SSP, specifically designed for the Baywindow 1700-2000cc Type 4 engine and T25 DH 1.9 Waterboxer (US specification only). Manufactured to meet high standards of performance and longevity, this exhaust tailpipe offers superior resistance to rust and corrosion, ensuring a longer service life than traditional components.

For optimal performance, we recommend replacing the tailpipe gasket at the same time (part number 021-251-235). This ensures a tight, leak-free seal, reducing the risk of exhaust issues and enhancing your vehicle’s overall efficiency. Easy to install, this high-grade replacement tailpipe is the perfect way to restore or enhance the exhaust system of your classic Volkswagen.

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985)

Notes:

Baywindow - 1700-2000cc type 4 engine T25 - DH 1.9 Waterboxer (US specification only) We recommend replacing the tail pipe gasket at the same time, part number 021-251-235.

Additional Vehicle Info: T25,T2 Bay

021-251-185/F – Tail Pipe 1700cc-2000cc or US Spec 1900cc

Description:

Made of durable mild steel for long-lasting performance
Fits 1700-2000cc Type-4 Baywindow engines and DH 1.9 Waterboxer (T25 US Spec)
Ideal replacement for damaged or faulty exhaust tailpipes

This Exhaust Tailpipe is crafted from high-quality mild steel, providing a reliable and durable replacement for your exhaust system. It is designed to fit 1700-2000cc Type-4 engines in Baywindow and DH 1.9 Waterboxer engines in T25 models (US specification only). This tailpipe is an excellent choice for restoring or repairing your exhaust, ensuring smooth engine operation and reducing unwanted noise.

Perfect for replacing a damaged or faulty tailpipe, this part delivers exceptional performance and easy installation. With its sturdy construction, it is a great way to restore the exhaust system on your vehicle, ensuring it runs efficiently and maintains optimal engine performance.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1983,1984,1985)

Notes:We recommend replacing the tail pipe gasket at the same time. This is part number 021-251-235

Additional Vehicle Info: T25,T2 Bay

021-251-261 – Exhaust Gasket, Between Heat Exchanger and Silencer 1700cc-2000cc or US Spec

Description:

Seals the joint between heat exchanger and silencer
High-quality material for heat and pressure resistance
Supplied each – one required per connection

This gasket is designed to fit between the heat exchanger and exhaust silencer, ensuring a tight, leak-free seal in high-temperature environments. It's an essential part for maintaining proper exhaust flow and preventing gas leaks.

Fits 1700cc–2000cc Type 4 air-cooled engines and 1.9 Waterboxer engines up to 1985. Ideal for maintenance, repairs, or full exhaust system rebuilds.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983,1984,1985)

Additional Vehicle Info: 914,T25,T2 Bay

021-251-521 – Silencer Strap 1700cc-2000cc US Spec

Description:

Strap for silencer to cross over pipe. To fit type 4 Engines 1700-2000 US spec.

To fit from chassis number 215 2000 001>> up to chassis >>218 2300 000

Compatible Vehicles: - T2 Bay (1971,1972,1973,1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

021-251-541 – Left Rear Exhaust Pipe 1700-2000 US Engines

Description:

Cat replacement pipe to fit 1700-2000 US spec type 4 engines

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

021-253-039/E – Exhaust Manifold Gasket VR6 Cylinders 1-3

Description: Exhaust manifold gasket for VR6 engines. For one side, cylinders 1-3

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-253-050/B – Exhaust Manifold Gasket VR6 Cylinders 4-6

Description:

Exhaust manifold gasket for VR6 engines. For one side, cylinders 4-6

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999)

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-253-053/C – Exhaust Rear Silencer, OE Style

Description:

Manufactured to OE standards
Tail pipe on left side (not included)
Made of steel with heat resistant grey paint

To fit:

Porsche

914 1.7, 1.8 01/1969-02/1976

Volkswagen

Type 4 (not Variant) 1.7, 1.8 09/1969-03/1975

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 4 (1970,1971,1972,1973,1974)

Additional Vehicle Info: 914

021-253-115 – Gasket for Front Exhaust Pipe 2.8 6 Cylinder

Description:

Triangular Exhaust Gasket for the front pipe. 1996-2000 on the 2.8 6 Cylinder AES Engine code

Compatible Vehicles: - T4 (1996,1997,1998,1999,2000)

Additional Vehicle Info: Transporter T4

021-256-091/M – Heat Exchanger for 1700-2000 Engines Left Side

Description:

Heat exchanger for left side of 1700-2000 Type 4 engines.
Enhances heating efficiency and exhaust management.
Designed for a precise fit and optimal performance.

This heat exchanger is specifically designed to fit the left hand side of 1700-2000 Type 4 engines, ensuring effective heating and exhaust management. It enhances the overall efficiency of your engine's heating system, contributing to a more comfortable driving experience.

Built for a precise fit, this heat exchanger integrates seamlessly with your engine setup, providing reliable performance and durability. It's an essential component for maintaining proper heating and exhaust flow in your Type 4 engine.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978)

Notes:Oval hole for heater pipe

Additional Vehicle Info: T2 Bay

021-256-092/M – Heat Exchanger for 1700-2000 Engines Right Side

Description:

Heat exchanger for right side of 1700-2000 Type 4 engines.
Enhances heating efficiency and exhaust management.
Designed for a precise fit and optimal performance.

This heat exchanger is specifically designed to fit the right hand side of 1700-2000 Type 4 engines, ensuring effective heating and exhaust management. It enhances the overall efficiency of your engine's heating system, contributing to a more comfortable driving experience.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978)

Additional Vehicle Info: T2 Bay

021-256-205/K – Heat Control Box for1700-2000 Engines Left

Description:

Heat control box to fit the left hand side on 1700-2000 type 4 engines in Baywindow models and US Spec Beetles from 1975-1979

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,Beetle Cabriolet,T2 Bay

021-256-206/K / – Heat Control Box for 1700-2000 Engines Right

Description:

Heat control box to fit the right hand side on 1700-2000 type 4 engines in Baywindow models and US Spec Beetles from 1975-1979

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: Beetle,T2 Bay

021-256-251/A – Sealing Ring, Heat Exchanger to Cylinder Head

Description:

Ensures tight seal between heat exchanger and cylinder head
Designed for 1700-2000cc Type 4 engines
Reliable performance under high heat conditions

This sealing ring is made to join the heat exchanger securely to the cylinder head on 1700-2000cc Type 4 engines. Its precision fit reduces the risk of leaks, helping your engine maintain optimal efficiency and performance.

Crafted for durability, it withstands the extreme heat and pressure typical of air-cooled engine operation. Whether you're doing a fresh rebuild or replacing a worn component, this ring delivers dependable results.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978) - 914 (1970,1971,1972,1973)

Additional Vehicle Info: 914,T2 Bay

021-256-321/D – Heat Exchanger Air Inlet Cover Plate, Left

Description:

Heat exchanger air inlet cover plate, left. For 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: 912,912E,914,T2 Bay

021-256-321/DR – Air Inlet Cover Plate, Left, Type 4 Engine

Description:

Fits left heat exchanger on Type 4 engines
For Baywindow and 411/412 models
Covers air inlet to maintain proper airflow

This air inlet cover plate is designed for the left-side heat exchanger on Type 4 engines, as found in Baywindow buses and 411/412 models. It helps direct airflow properly through the heating system by sealing and protecting the air inlet.

Essential for efficient heating and engine bay cleanliness, this cover plate is a direct-fit replacement built to original specs. Ideal for restorations or replacing missing or damaged parts.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Baywindow USA (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: 914,T2 Bay

021-256-322/B – Heat Exchanger Air Inlet Cover Plate, Right

Description:

Heat exchanger air inlet cover plate, right. For 1700-2000cc Type 4 engines.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 912,912E,914,T2 Bay

021-256-322/BR – Heat Exchanger Air Inlet Cover Plate, Right

Description:

Fits right heat exchanger on Type 4 engines
For Baywindow and 411/412 models
Covers air inlet to maintain proper airflow

This air inlet cover plate is designed for the right-side heat exchanger on Type 4 engines, as found in Baywindow buses and 411/412 models. It helps direct airflow properly through the heating system by sealing and protecting the air inlet.

Essential for efficient heating and engine bay cleanliness, this cover plate is a direct-fit replacement built to original specs. Ideal for restorations or replacing missing or damaged parts.

Additional Vehicle Info: 914,T2 Bay

021-256-325/A – Gasket for Heat Exchanger Cover

Description:

Manufactured to OE standards
High quality materials

To fit:

Porsche

914 1.7, 1.8, 2.0 1970-1976 - RIGHT

912E 2.0 1976 - RIGHT

Volkswagen

T2 Bay 1.7-2.0 08/1971-07/1979 - LEFT

Type 4 1.7-1.8 07/1968-03/1975 - LEFT

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: 912,912E,914,T2 Bay

021-256-326/A – Gasket for Heat Exchanger Cover

Description:

Manufactured to OE standards
High quality materials

To fit:

Porsche

914 1.7, 1.8, 2.0 1970-1976 - LEFT

912E 2.0 1976 - LEFT

Volkswagen

T2 Bay 1.7-2.0 08/1971-07/1979 - RIGHT

Type 4 1.7-1.8 07/1968-03/1975 - RIGHT

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - Type 4 (1968,1969,1970,1971,1972,1973,1974)

Additional Vehicle Info: 912,912E,914,T2 Bay

021-298-001/A – Exhaust & Tailpipe Fitting Kit for 1700-2000 Engines

Description:

Suitable for VW 1700-2000cc, Porsche 914 1700-1800cc, and early T25 Waterboxer
Includes gaskets, nuts, and bolts for secure installation
Ideal for restoring or replacing exhaust and tailpipe components

This Exhaust and Tailpipe Fitting Kit is designed for 1700-2000cc Type-4 engines, including VW models, Porsche 914 (1700-1800cc), and early T25 Waterboxer engines. The kit includes all the necessary components to ensure a secure and leak-free exhaust installation.

The contents include 2 Exhaust to Heat Exchanger gaskets, 6 nuts for the exhaust connections, 1 Tailpipe gasket, and 3 nuts/bolts for attaching the tailpipe. Whether you're restoring or replacing your exhaust system, this kit provides the essential parts for a hassle-free installation and optimal engine performance.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

021-298-053 – Exhaust Kit, 1700-2000cc Type 4

Description:

TUV-approved silencer and tailpipe included
Fits Baywindow models up to 1979
Ideal for 1700-2000cc Type-4 aircooled engines

This complete exhaust kit is designed for Type-4 engines, ideal for 1700-2000cc aircooled configurations. It includes a TUV-approved silencer, tailpipe, and all necessary fittings, ensuring a seamless and straightforward installation. Compatible with Baywindow buses from 1972 to 1979, it guarantees an easy fit, and with a simple tailpipe adjustment, it will also work for T25 models up to 1985.

Heritage kits are built with quality and convenience in mind, offering excellent value. Whether you're restoring a classic VW or simply maintaining your vehicle, this exhaust kit ensures long-lasting performance and reliable functionality, allowing you to drive with confidence.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985)

Additional Vehicle Info: T25,T2 Bay

021-298-250 – Heat Exchanger Kit, 1700-2000 Type 4 Engines

Description:

Complete heat exchanger kit for Type 4 engines
Fits 1700, 1800, and 2000cc Baywindow models
Includes heat exchangers, elbows, pods, and gaskets

This heat exchanger kit is designed to keep your Baywindow warm and comfortable during every drive. The bundle includes everything needed for a reliable, easy installation: two heat exchangers, heater elbows, heater pods, and all required gaskets. Crafted to fit Baywindow models with Type 4 1700, 1800, or 2000cc engines, this kit provides efficient heating for your classic vehicle.

With Heritage's heat exchanger kit, you’ll save both time and money on sourcing separate components. The raised stubs insert easily into the cylinder heads, utilising oval copper gaskets for a secure fit and optimal heat distribution.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978)

Additional Vehicle Info: T2 Bay

021-903-023/FN – Alternator, 55Amp, 1700-2000cc Type-4 Engines

Description:

High-quality replacement for 1700-2000 Type-4 engines
Delivers reliable 55-amp output for optimal performance
Easy installation with standard fitment for your vehicle

Upgrade your Type-4 engine with our standard replacement 55 amp alternator, designed specifically for 1700-2000 models. This alternator ensures your engine runs smoothly while providing a reliable power supply to all electrical components.

Crafted for durability and efficiency, this alternator offers a perfect fit and hassle-free installation. Enjoy peace of mind knowing you have a dependable power source to keep your vehicle performing at its best.

Compatible Vehicles: - T2 Bay (1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:For 1700-2000cc Type 4 engine. Please change your voltage regulator at the same time as fitting a new alternator. Many charging problems are due to faulty regulators. Voltage regulator part number: 043-903-803/B When re-fitting the cover plate on the back of the alternator you must ensure it does not contact the terminals and short the alternator.

Additional Vehicle Info: 914,T2 Bay

021-903-025/B – Alternator, 120 Amp, VR6

Description:

120 amp alternator for VR6 engines
Compatible with other models for easy upgrade
Replaces 70/90 amp alternators

This 120 amp alternator is designed specifically for VR6 engines, providing reliable performance for your vehicle. With its upgraded power output, it can also fit a variety of other car models, making it a versatile option for those in need of a stronger alternator.

Whether you're looking to replace an older 70 or 90 amp alternator or simply want to boost your vehicle's electrical system, this 120 amp alternator is the perfect solution. It's engineered to ensure smooth operation and is an ideal upgrade for better efficiency and durability.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Notes:Other OE numbers 021-903-023\/L 028-903-025\/R 021-903-025\/G

Additional Vehicle Info: Corrado,Golf Mk3

021-903-027 – Alternator, 70 Amp, 1700-2000cc Type-4 Engines

Description:

High-quality replacement for 1700-2000 Type-4 engines
Delivers reliable 70-amp output for optimal performance
Easy installation with standard fitment for your vehicle

Upgrade your Type-4 engine with our standard replacement 70 amp alternator, designed specifically for 1700-2000 models. This alternator ensures your engine runs smoothly while providing a reliable power supply to all electrical components.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973,1974,1975,1976)

Notes:For 1700-2000cc Type 4 engine Please change your voltage regulator at the same time as fitting a new alternator. Many charging problems are due to faulty regulators. Voltage regulator part number: 043-903-803/B When re-fitting the cover plate on the back of the alternator you must ensure it does not contact the terminals and short the alternator.

Additional Vehicle Info: 914,T2 Bay

021-903-137/A – Alternator Belt, 10x965

Description:

Alternator belt 10x965mm.

To fit:
Baywindow - 2000cc type 4 engine
T4 - 2.0 AAC 09/1990-12/1995
Mk2 Golf - Diesel engines with no power steering or air con
Mk2 Jetta - Diesel engines with no power steering or air con
Type 3
Porsche 914 (1.7-2.0) 1970-1976

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - Golf Mk2 (1984,1985,1986,1987,1988,1989,1990,1991,1992) - 914 (1970,1971,1972,1973,1974,1975,1976) - T4 (1991,1992,1993,1994,1995) - Type 3 (1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: 914,Golf Mk2,Transporter T4,T2 Bay,Type 3

021-903-655/B – Alternator Cooling Pipe for 1700-2000cc

Description:

Ensures optimal airflow and cooling efficiency
Designed for alternators with oval outlet
Fits 55 Amp Alternator Type 4 engines

This alternator cooling pipe, fits between the tin wear and the alternator to provide essential airflow for cooling. The pipe helps maintain optimal cooling efficiency and performance by directing air to the alternator.

Given that the rubber pipe can perish with age, replacing it is crucial to prevent overheating and ensure reliable operation. This replacement part helps maintain your engine’s cooling system in top condition, enhancing longevity and performance.

Fits engines,
CA engines up to 1972
AP engines up to 1974
CE engines, all years.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974)

Additional Vehicle Info: T2 Bay

021-905-106 – Ignition Coil, VR6

Description:

Reliable ignition coil replacement for VR6 engine vehicles.
Supports consistent engine performance and spark delivery.
Simple installation with a direct fit for VR6 models.

This replacement ignition coil is designed for VR6 engine vehicles, providing the necessary spark to keep your engine running smoothly. It's a dependable choice when you're addressing ignition issues or maintaining your vehicle.

With its straightforward installation, this ignition coil is a direct fit for standard VR6 models, making it an easy and practical solution to keep your engine working efficiently.

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Notes:T4 - 2.8 VR6 AES, AMV Corrado - 2.9 VR6 ABV From chassis 50-P-010 001>> Mk3 Golf - 2.8 VR6 AAA

Additional Vehicle Info: Corrado,Golf Mk3,Transporter T4,Vento

021-905-207 – Distributor Cap for VR6

Description:

Distributor cap for VR6 engines with Bosch distributor.

Vehicle fitments
Corrado ABV from chassis number 50-N-000001>>
Mk3 Golf/Vento AAA up to chassis number >>1H-NW300000

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995,1996,1997,1998)

Additional Vehicle Info: Corrado,Golf Mk3

021-905-225/C – Rotor Arm for VR6 Distributor

Description:

Rotor arm for the distributor

To fit
Corrado - VR6 with engine code ABV from chassis 50-N-018001>>
Mk3 Golf - VR6 with engine code AAA from chassis 1H-NW300001>> to chassis >>1H-PW480000

Compatible Vehicles: - Corrado (1992,1993,1994,1995) - Golf Mk3 (1992,1993)

Additional Vehicle Info: Corrado,Golf Mk3

021-906-265/AK – Lambda Probe for 1.4 and VR6 Engines

Description:

Lambda probe

Compatible Vehicles: - Golf Mk3 (1995,1996,1997,1998) - T4 (1996,1997,1998,1999,2000,2001,2002,2003)

Notes:To fit Mk3 Golf - ABD engine with no catalytic converter from chassis 1H-S-120 001>> Mk3 golf - VR6 AAA T4 - VR6 AES engine with a catalytic converter

Additional Vehicle Info: Golf Mk3,Transporter T4

021-906-265/R – Lambda Sensor, 2.0 GTI

Description: Lambda sensor for 2.0 GTI and 2.8 VR6

Compatible Vehicles: - Golf Mk3 (1995,1996,1997,1998) - Golf Mk3 Cabrio (1994,1995,1996,1997,1998,1999,2000,2001,2002) - Polo Mk3 6N (1996,1997,1998,1999,2000) - T4 (1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Golf Mk3,Golf Mk3 Cabrio,Polo Mk3 6N,Transporter T4,Vento

021-906-433/A – Crankshaft Sensor, VR6

Description:

Crankshaft sensor for VR6

Compatible Vehicles: - Corrado (1989,1990,1991,1992,1993,1994,1995) - Golf Mk3 (1992,1993,1994,1995)

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-906-462 – Air Mass Meter VR6

Description:

Air mass meter, VR6

Compatible Vehicles: - Corrado (1994,1995) - Golf Mk3 (1995,1996,1997,1998)

Notes:Corrado from chassis number 50-R-015 001>>

Additional Vehicle Info: Corrado,Golf Mk3,Vento

021-919-081/B – Oil Pressure Switch, 1 Pin White

Description:

Compact oil pressure switch with 1-pin white connector
Operates within 0.15 to 0.45 Bar for optimal performance
Easy installation with a straight thread for M10X1 crankcase

The oil pressure switch is designed for reliable performance in various applications. Featuring a one-pin white connector, it ensures efficient monitoring of oil pressure within your system.

With an operational range of 0.15 to 0.45 Bar, this switch provides accurate readings to help maintain optimal engine performance. Its straight thread design allows for easy installation into a standard M10X1 thread in the crankcase, making it a practical choice for your needs.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Notes:Be careful not to over tighten when installing into the crankcase.

Additional Vehicle Info: Beetle,Beetle Cabriolet,Karmann Ghia,T2 Bay,T2 Split,Type 3

021-919-081/BQ – Oil Pressure Switch Tapered

Description:

Operates at 0.15-0.45 Bar for reliable performance
Tapered thread design ensures no seal is needed
Made in Germany, perfect fit for Type 1 engines

The Hella Original Style Tapered Oil Pressure Switch offers precise oil pressure monitoring for Type 1 engines. Operating at 0.15-0.45 Bar, it ensures that your engine's oil pressure is maintained for optimal performance. This switch is designed with a tapered thread, which allows it to screw directly into a M10X1 thread in the crankcase without the need for a seal, reducing potential leakage and providing a secure, long-lasting connection.

Made in Germany, this high-quality component is the correct fit for all Type 1 engines, ensuring hassle-free installation and reliable function. The tapered design ensures a perfect seal every time, making it the best choice for those seeking a robust and reliable oil pressure switch.

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - 912 (1965,1966,1967,1968,1969,1976) - 914 (1970,1971,1972,1973,1974,1975,1976) - 924 (1976,1977,1978,1979,1980,1981,1982,1983,1984,1985) - T2 Split Bus (1961,1962,1963,1964,1965,1966,1967) - Type 3 (1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Notes:Be careful not to over tighten when installing into the crankcase.

Additional Vehicle Info: 912,914,924,Beetle,Beetle Cabriolet,Karmann Ghia,T25,T2 Bay,T2 Split,Type 3

021-971-349/D – Alternator Wiring Loom

Description:

Direct replacement for degraded factory wiring.
Includes correct grommets and connectors.
Restores safe, reliable electrical connections.

Over time, the alternator wiring harness in Volkswagen's and Porsche's fitted with Type 4 engines deteriorates due to heat and harsh conditions. This can lead to exposed copper wires, increasing the risk of short circuits and electrical failures.

This high-quality replacement harness is an exact match to the original, ensuring a hassle-free installation. It includes all necessary grommets and connectors, restoring safe and reliable power flow to your alternator. Suitable for 1970-1978 VW Buses and all Porsche 914's equipped with the 4 cylinder air-cooled Type 4 engine.

Compatible Vehicles: - T2 Bay (1970,1971,1972,1973,1974,1975,1976,1977) - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

022-100-175 – Sticker Valve Clearance

Description:

Valve clearance sticker

May have slight differences to web picture

Compatible Vehicles: - T2 Bay (1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Beetle Cabrio (1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Buggy/Baja (1947,1948,1949,1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979) - Karmann Ghia (1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973,1974) - T2 Split Bus (1950,1951,1952,1953,1954,1955,1956,1957,1958,1959,1960,1961,1962,1963,1964,1965,1966,1967) - Trekker (1969,1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,1986,1987,1988) - Type 3 (1961,1962,1963,1964,1965,1966,1967,1968,1969,1970,1971,1972,1973)

Additional Vehicle Info: Beetle,Beetle Cabriolet,Buggy/Baja,Karmann Ghia,Trekker,T2 Bay,T2 Split,Type 3

022-105-273/A – Forged Flywheel, 215mm

Description:

Forged chromoly construction for superior strength
Heat-treated 12V ring gear for durability
Precision-machined to OEM specifications

Upgrade your Porsche 914 with this brand-new forged chromoly flywheel, precision-engineered as a direct stock replacement for 215mm applications. Manufactured to exact specifications, it ensures optimal fitment and performance. The flywheel features a heat-treated 12V ring gear for enhanced durability and long-lasting reliability under demanding conditions. Weight is 8.35kg.

Ideal for restoration or performance builds, this flywheel offers the strength and resilience of forged chromoly construction, making it a dependable choice for enthusiasts and professionals alike. Whether you're refreshing your drivetrain or building for longevity, this component delivers OEM compatibility with modern manufacturing quality.

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 912,912E,914

022-105-323/D – Torque Convertor Drive Plate, 1700-2000 Type 4, 1.9-2.1 Waterboxer

Description:

Compatible with 1.7-2.0 Type 4 & 1.9-2.1 Waterboxer engines
Durable construction for optimal performance and longevity
Ensures smooth torque conversion for reliable engine operation

This torque converter drive plate is designed for use with 1.7-2.0 Type 4 and 1.9-2.1 Waterboxer engines, offering a reliable solution for enhancing engine performance. Built to last, it provides the durability needed for the demands of both everyday driving and high-performance applications.

Engineered to ensure smooth and efficient torque conversion, this drive plate helps optimise engine operation and reduce wear. Its precision design guarantees a perfect fit, allowing for hassle-free installation and improved driving experience.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:Requires: 5 x bolts N90-226-801 1 x O-Ring 021-105-279

Additional Vehicle Info: T25,T2 Bay

022-105-401 – Con Rod Set, Type-4 1700-1800cc

Description: Set of 4 rebuilt connecting rods. To fit 1700cc & 1800cc Type 4 engines. (Outright sale, no exchange necessary)

This set of rebuilt con-rods has had the small end bush pre-installed.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975)

Additional Vehicle Info: T2 Bay

022-109-309/BQ – Hydraulic Camshaft Follower 1600 CT/1700-2000cc Type 4/Waterboxer

Description:

Hydraulic cam follower. Supplied each.

This is the hydraulic cam follower for engines with 'hydraulic tappets'; these cam followers should be filled with oil prior to installation in order to ensure their correct operation. If your engine has had noisy tappets and is having a tear down it is well worth replacing the old lifters to ensure a smooth and quiet running engine; this will help ensure the longevity of your valvetrain.

To fit:
T2 Baywindow 2.0 GE engine
T25 1.6 & 2.0 Aircooled CT, CU, CV, CZ engines
T25 Waterboxer DF, DG, DH, DJ, MV, EY, SP, SR, SS, GW engines.

Compatible Vehicles: - T2 Bay (1977,1978,1979) - Baywindow USA (1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

022-109-309/F – Hydraulic Camshaft Follower, 1600 CT, 1700-2000cc Type 4 Waterboxer

Description:

High-quality hydraulic camshaft follower
Compatible with 1600 CT and Type 4 engines
Enhances engine performance and durability

This hydraulic camshaft follower is designed to fit 1600 CT engines and 1700-2000cc Type 4 Waterboxer engines. Engineered for optimal compatibility, it ensures smooth and efficient operation, providing your engine with the reliability it needs for consistent performance.

Crafted to meet high standards, this component enhances the overall durability of your engine. Whether you're restoring a classic vehicle or maintaining your current engine, this camshaft follower is a dependable choice for improving engine longevity and functionality.

Compatible Vehicles: - T2 Bay (1977,1978,1979) - Baywindow USA (1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

022-109-443 – Rocker Arm 2000cc Inlet 10mm

Description: Rocker Arm for the Inlet Valves only on 2000cc aircooled Type-4 engines. Sold individually. This is a Genuine VW rocker arm, and is new old stock so is the best quality available.

Compatible Vehicles: - T2 Bay (1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: T25,T2 Bay

022-109-451 – Valve Adjustment Screw 10mm

Description:

High-quality 10mm valve adjusting screws for Type 4 engines
Perfect fit for 1800cc-2000cc Type 4 & 2100cc, 1900cc Waterboxer engines, not 1.7cc engine
Heat-treated for long life and consistent valve adjustments

These 10mm valve adjusting screws are designed for 1800cc-2000cc Type 4 engines 85-92 and 2100cc & 1900cc Waterboxer engines 89-92 from Chassis 24-K-025 780. Unlike cheap, poorly made alternatives, these screws are heat-treated for durability and long-lasting performance, ensuring smooth and consistent valve adjustments over time.

Old valve adjusting screws often seize in the rocker arm, requiring removal with a torch and vice grips. However, this method necessitates replacement. Regularly adjusting with new, high-quality screws prevents this issue and ensures easy movement. Worn tips on old adjusters can make valve adjustments difficult, but these new adjusters provide a smooth, hassle-free solution.

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

022-109-601 – Inlet Valve 41mm x 8mm 1800cc

Description:

Standard intake valve for 1800cc Type 4 engines. Each.

Compatible Vehicles: - T2 Bay (1974) - 914 (1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

022-109-612/A – Exhaust Valve 34mm x 9mm 1800cc

Description:

Standard exhaust valve for 1800cc Type 4 engines. Each.

To fit:
T2 08/1973-07/1974 AP engine code up to engine no AP 027 465
914 1974-1976

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - 914 (1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

022-109-612/D – Exhaust Valve 33mm x 9mm 1700-2000cc

Description:

Designed for 1700cc-2000cc Type-4 engines
Improves exhaust flow for better performance
Enhances sound and overall engine efficiency

This Exhaust Valve is specifically designed for 1700cc-2000cc Type-4 engines, essential to enhance exhaust flow, sound, and performance. By allowing exhaust gases to exit more efficiently, it helps improve engine output and efficiency, making it an ideal replacement for worn or damaged valves.

Made from high-quality materials, this exhaust valve ensures reliable performance and durability. Whether you're restoring your engine or upgrading for better performance, this valve contributes to smoother operation and a more responsive driving experience.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - 914 (1970,1971,1972,1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 914,T25,T2 Bay

022-121-011/X – Water Pump with Sealing Ring 2.8-3.2

Description:

Water pump supplied with seal to fit.

To fit:
T4 - 2.8 VR6 AES, AMV
T5 - 3.2 BDL, BKK, CFCL
Mk4 Golf - 2.8 AQP, AUE, BDE, BFH, BML

Compatible Vehicles: - Golf Mk4 (1998,1999,2000,2001,2002,2003,2004) - T4 (1999,2000,2001,2002,2003) - T5 (2004,2005,2006,2007,2008,2009,2010)

Additional Vehicle Info: Golf Mk4,Transporter T4,Transporter T5

022-121-117/C – Thermostat Housing for VR6 and 3.2 Petrol

Description:

Thermostat housing for T4 2.9 VR6 and T5 3.2 petrol engines.

Supplied with seal.

Compatible Vehicles: - T4 (1999,2000,2001,2002,2003) - T5 (2003,2004,2005,2006,2007)

Additional Vehicle Info: Transporter T4,Transporter T5

022-129-707/F – Inlet Manifold Spacer Type 4 injection

Description:

Bakelite inlet manifold gasket/spacer for fuel injection Type4 engines. Sold each.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Notes:1 per side, 2 required per engine

Additional Vehicle Info: T25,T2 Bay

022-129-967/AC – Air Intake Hose for Fuel Injected Models

Description:

Air intake hose for fuel injected models.

Fits engine codes 1.8 ED, and 2.0 GD, GE

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - Baywindow USA (1974,1975,1976,1977,1978,1979)

Additional Vehicle Info: T2 Bay

022-133-083/D – Y-Piece for Servo Assisted Brakes

Description:

Y-piece

To fit
Baywindow - Used in the air intake system on L Jetronic models
T25 - 2.0 CV engine with a manual gearbox models up to chassis >>24A 2300 000. Used in the over run air system

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992)

Additional Vehicle Info: T25,T2 Bay

022-141-197/C – Clutch Bolt M7

Description:

Clutch bolt.

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - Golf Mk1 (1975,1976,1977,1978) - Scirocco (1974,1975,1976,1977)

Notes:Mk1 Golf/Scirocco - FA and FJ engine Baywindow/T25- 215mm 1600cc AS and 1800cc Type 4 engine. These originally used an M7x18mm Bolt but they are now only available in 25mm, you will need to cut these down to use them.

Additional Vehicle Info: Golf Mk1,Scirocco,T2 Bay

022-198-075/A – Barrel and Piston Kit Type 4 1800cc (Dish top) 93x66mm

Description:

Designed for dished/low compression versions of Baywindow AP and some 914 engines
Includes barrels, pistons, rings, wrist pins, and clips
High-quality components for reliable performance

Enhance your 1800cc Type 4 engine with this top-quality Barrel and Piston Kit from AA Performance. Specifically designed for the dished/low compression versions used in Baywindow AP engines and select 914 models, this kit ensures a precise fit and optimal performance.

Each kit includes everything you need: durable barrels, pistons, rings, wrist pins, and clips. This comprehensive package is perfect for restoring your engine's efficiency and power. Trust AA Performance for reliable components that enhance your engine’s longevity and performance. Get ready to hit the road with confidence.

Compatible Vehicles: - T2 Bay (1973,1974,1975) - 914 (1974,1975,1976)

Additional Vehicle Info: 914,T2 Bay

022-198-141 – Clutch Kit, 210mm, for 1700-1800cc Type 4

Description:

Complete kit with all essential components
Precision-engineered for optimal performance
Manufactured by trusted brand FORST

This 210mm clutch kit is designed specifically for 1700-1800cc Type 4 engines, providing a reliable and efficient solution for your vehicle. The kit includes a pressure plate, friction plate, and clutch release bearing—everything you need for a complete clutch replacement.

Manufactured by FORST, a trusted name in automotive parts, this clutch kit ensures smooth operation and long-lasting performance. Whether you're replacing a worn-out clutch or upgrading your vehicle, this kit delivers the quality and reliability you need.

Compatible Vehicles: - T2 Bay (1972,1973,1974) - Type 4 (1970,1971,1972,1973,1974)

Notes:

Baywindow 1.7 72-74

411/412 1.7 & 1.8 70-74

Please check the size of your old clutch before ordering.

Additional Vehicle Info: T2 Bay

022-198-141/A – Clutch Kit, 215mm, for 1600-1800cc and early 1.9 Waterboxer

Description:

Complete kit with pressure, friction, and release plate
High-quality FORST manufacturing
Ensures smooth, reliable performance

This 215mm clutch kit is designed to provide optimal performance and durability, making it an essential upgrade for your vehicle. The kit includes a pressure plate, friction plate, and release bearing, ensuring a comprehensive solution for your clutch system needs.

Manufactured by FORST, a trusted name in automotive parts, this clutch kit guarantees smooth engagement and long-lasting reliability. Whether you're replacing a worn-out clutch or enhancing your vehicle's performance, this high-quality kit is the perfect choice for maintaining peak driving efficiency.

Compatible Vehicles: - T2 Bay (1974,1975,1976,1977,1978,1979) - Baywindow USA (1976,1977,1978,1979) - T25 (1980,1981,1982,1983) - Vanagon (1980,1981,1982,1983)

Notes:

Vehicle and engine fitment

Baywindow 1600cc 76-79

Baywindow 1800cc 74-75

T25 1600cc & 1.9 79-83

Please check the size of old clutch before ordering.

Additional Vehicle Info: T25,T2 Bay

022-256-121 – Heat Exchanger Connector Elbow

Description:

Connects heat exchanger to control box
Fits left or right side
Steel with grey painted finish

This metal elbow connects the heat exchanger to the heater control box. It fits either the left or right side and is made of steel with a grey painted finish. Built to match OE specifications using quality materials.

To fit:

914 1.7, 1.8, 2.0 01/1969-02/1976

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

022-256-205/B – Heater Control Flap, Left

Description:

Heater control flap, left.

To fit:
914 1.7, 1.8, 2.0 1970-1976

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

022-256-206/B – Heater Control Flap, Right

Description:

Heater control flap, right.

To fit:
914 1.7, 1.8, 2.0 1970-1976

Compatible Vehicles: - 914 (1970,1971,1972,1973,1974,1975,1976)

Additional Vehicle Info: 914

022-903-655 – Alternator Cooling Pipe 1700-2000cc for 70 Amp Alternator

Description:

Alternator cooling pipe for Type 4 Engine 1700-2000cc with round outlet. It fits 70 amp alternators.

This fits between the alternator and the bodywork and supplies air to the alternator keeping it cool. A lot of the time the rubber the pipe is made from becomes dry and cracks with heat and age. Replace it with this brand new one for piece of mind as Aircooled engines need to be kept cool.

Compatible Vehicles: - T2 Bay (1972,1973,1974,1975,1976,1977,1978,1979) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: 912,912E,T25,T2 Bay

022-906-035 – Fuel Pressure Regulator for 1600-2000cc Injection

Description:

Maintains proper fuel pressure for VW Beetles & Buses
Faithful reproduction of the original regulator
Prevents engine performance issues due to pressure loss

Ensure your classic VW Beetle or Bus runs smoothly with this high-quality fuel injection pressure regulator. After decades of use, the original regulator can fail, leading to inconsistent fuel pressure and poor engine performance. This replacement unit maintains the correct pressure—29 PSI at idle with the vacuum hose connected and 36 PSI when disconnected—keeping your engine in peak condition.

Designed as a faithful reproduction of the original, this regulator ensures reliable operation. A failing unit often results in vacuum diaphragm leaks, sometimes accompanied by a hissing sound. Replacing it with this precise reproduction restores proper fuel delivery, making it an essential component for any fuel-injected 1600-2000cc VW engine.

Compatible Vehicles: - T2 Bay (1976,1977,1978,1979) - Beetle (1975,1976,1977,1978,1979) - Type 3 (1973) - T25 (1980,1981,1982,1983)

Additional Vehicle Info: Beetle,T25,T2 Bay,Type 3

023-103-383/B – Cylinder Head Gasket 2.5 Petrol

Description:

Head Gasket 1.75mm.

Engine fitment codes and year range
AAF 2.5 Petrol 09/90-12/93
ACU 2.5 Petrol 08/93-10/96
AEN 2.5 Petrol 05/95-07/95
AET 2.5 Petrol 08/96-09/03
AEU 2.5 Petrol 08/96-11/01
APL 2.5 Petrol 05/99-12/99
AVT 2.5 Petrol 12/99-06/03

Compatible Vehicles: - T4 (1991,1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003)

Additional Vehicle Info: Transporter T4